# Sports Health Products — Hazardous Materials Safety Interpretation

**Citation:** 05-0155  
**Type / status:** guidance / guidance  
**Agency:** Pipeline and Hazardous Materials Safety Administration  
**Effective:** Not stated  
**Published:** 2005-07-21

05-0155 response to Sports Health Products concerning 173.22.

## Document text

<<<PAGE 1>>>

of Transportation
U.S. Department
400 Seventh Street, S.W.
Washington, D.C. 20590
Pipeline and
JUL 21 2005
Administration
Hazardous Materiais Safety
Mr. Anthony Woods
Reference No.: 05-0155
Office Manager
Sports Health Products
527 W. Windsor Road
Glendale, CA 91204
Dear Mr. Woods:
Putty," is not a hazardous material and therefore, not subject to the Hazardous Materials
This responds to your letter requesting we confirm that your company's product, "Power
Regulations (HMR; 49 CFR Parts 171-180). "Power Putty" is a silicone elastomer used in
physical therapy for hand rehabilitation. You enclosed a Material Safety Data Sheet.
Under § 173.22, it is the shipper's responsibility to properly classify a hazardous material.
This office does not normally perform that function. However, based on the information you
submitted, it is the opinion of this office that "Power Putty" does not meet the definition of a
hazardous material, and thus, is not subject to the HMR.
I hope this satisfies your inquiry.
Sincerely,
Hattie L. Mitchell
Chief, Regulatory Review and Reinvention
Office of Hazardous Materials Standards
173.22
050155

<<<PAGE 2>>>

FROM:
SportsHealth
SPORTSHEALTH PRODUCTS
FAX NO.
8182400112
06-20-05
01:38P
P.02
527 W. Windsor Road
Glendale, CA 91204
Telephone: (818) 240-7170
Corbin
Fax: (818) 240-0112
June 20, 2005
Shipper sensitig
Attn: Mr. Edward Mazzullo
Director, Office of Hazardous Materials Standards
Pipeline & Hazardous Materials Safety Administration
05-0155
U.S. Dot/PHMSA (PHH-10)
400 7'h Street S.W.
Washington, D.C. 20590-0001
Mr. Mazzullo,
Eileen Edmonson recommended | write this letter to you.
I sell Power Putty ™
, a silicone exercise putty that is similar to Silly Putty.
Some of my customers are missionaries who travel all around the world with our product.
They are concerned airport security screeners will not allow thern to take Power Putty™ on
the plane.
To prevent this from happening, these customers asked me if I could obtain documentation
from you stating our product is safe.
I would like to obtain from you a document on official letterhead stating Power Putty™ is a
safe product to travel with and is not a hazardous material.
Eileen Edmonson asked me to fax this letter along with a copy of our Material Safety Data
Sheet to assist you with my request.
If you are unable to fulfill my request or if you have any questions, please call me.
Thank you for your assistance with this unique situation.
Sincerely,
Anthon too
Anthony Woods
Office Manager
SportsHealth Products
(Please give my thanks to Ms. Edmonson for taking the time out of her busy schedule to
answer all of my questions. She was extremely helpful.)
The Makers of Power Putty!

<<<PAGE 3>>>

FROM:
Sportshealth
.FAX.MO..:-,8182400112
86-28-05
01:25P
P.02
Fax #:
(202) 366-3012
Pages:
7 (including cover)
From: Anthony Woods
Corbo
Re:
Power Putty™ Safety Letter
Mr. Mazzullo:
Please review the attached letter.
If you have any questions, please contact me.
Thank you in advance for your assistance.
Alliste
Anthony Woods
SportsHealth Products
The Makers of Power Putty!!
Thank you for your assistance with this unique situation.
Sincerely,
Antine to
Office Manager
Anthony Woods
SportsHealth Products
(Please give my thanks to Ms. Edmonson for taking the time out of her busy schedule to
answer all of my questions. She was extremely helpful.)
The Makers of Power Putty!

<<<PAGE 4>>>

=ROM:
SportsHealth
sportsheditil Prouucts 06-20-05
01: 26P
P.03
MATERIAL SAFETY DATA SHEET
Section 1. CHEMICAL PRODUCT/COMPANY IDENTIFICATION
Product Name:
Silicone Exercise Putty
Manufactured and/or Supplied By:
527 W. Windsor Road
SportsHealth Products
Glendale. CA 91204
Telephone:
Generic Description:
Fax:
(818)240-0112
(818)240-7170
Silicone Elastomer
Trade Name/Synonyms:
Color:
Physical Form:
Firm Paste
Power Putty
Odor:
Slight
Various
Section 2. COMPOSITION/INFORMATION ON INGREDIENTS
This material does not contain any hazardous substances at or above OSHA and WHMIS reportable levels.
Substances listed in the Subsections HAPS and California Proposition 65 Carcinogens /
Reproductive Toxins that are not listed in Section 2 are only present at quantities below 0.1% or they are inextricably bound in
the product.
Section 3. HAZARDS IDENTIFICATION
3.1
Hazards Classifications
Health: 1
HMIS® rating (product as packaged):
Fire: 1
Reactivity: 0
PPE: B
Hazardous Materials Identification System and HMIS are registered trademarks of the National Paint and Coatings
(HMIS codes are based on contact with the product as packaged and any hydrolysis by-products, if present).
Association
Canadian WHMIS Classification: None
3.2
Emergency Overview and Potential Hazards
Physical Hazards:
This material is not hazardous under OSHA criteria. This material is not hazardous under WHMIS criteria.
No known physical hazards.
Acute Health Effects
Route of Entry or Possible Contact:
Eye Contact:
Eyes, Skin, Ingestion
Skin Contact:
May cause slight eye irritation
Inhalation:
No acute toxic skin effects are expected
high viscosity
No acute toxic respiratory tract effects are expected. Inhalation is not expected due lo low vapor pressure or
Ingestion:
Ingestion is not expected in industrial use.
Additional Information on Acute Health Effects:
physical nature of this material. exposure to hazardous dusts/particulates is not expected.
The health hazard evaluation is based on test results and/or known properties of ingredients. Due to the
3.3
Further Information:
None Known
Medical Conditions which may be Aggravated by Exposure:
Target Organs Affected:
No known internal organ eltecis

<<<PAGE 5>>>

= ROM:
SportsHealth
Refer to Acule Healt Effecis. isted above.
FAX NO.:
8182400112
06-20-05
01:26P
P .04
Carcinogens/Reproductive Toxins:
normal conditions of use er during any foreseeable emergencies. This material does not contain any reproductive
This material does not contain any reportable carcinogenic ingredients. Exposure to carcinogens cannot occur under
toxins at or above OSHA er WHMIS reportable levels.
See Section 11 for Toxicological Information, if any.
Section 4. FIRST AID MEASURES
4.1
General Information:
contaminated optic and anoes
Get medical attention : ilation or other symptoms occur. Setore seeking medical attention remove
treatment.
Take a copy of the Material Safety Data Sheet when going for medical
4.2
Material cannot be inhaled under normal conditions. No special measures required.
After Inhalation:
4.3
much of the rearing maleral as possible. Wash with soap and water.
For skin contact ripe of excess materal with cloth or paper. Use a waterless hand cleaner to remove as
After Contact with the Skin:
4.4
If contact with eves, innedistory mold eyelids apart and flush with plenty of water for at least 15 minutes.
After Contact with the Eyes:
4.5
After Swallowing:
After swallowing: no special treatment is required
Section 5. FIRE FIGHTING MEASURES
5.1
Flash Point
Flammable Properties:
Not Applicable
5.2
Fire and Explosion Hazards:
This material dIes e? cresent are unusual fire or explosion hazards.
5.3
Water-spray cou chemica: alcohol resistant foam, carbon dioxide, sand
Recommended Extinguishing Media:
5.4
Water je:
Unsuitable Extinguishing Media
5.5
Special Exposure Hazards arising from the Substance or Preparation itself, Combustion Products, Resulting
Gases:
incompletely burn! hydrocarbons
Hazardous decomposition products: carbon dioxide. carbon monoxide, formaldehyde, silicon dioxide and
5.6
Fire fighters should wear till pintective clothing including a self-contained breathing apparatus. Cool
Fire Fighting Procedures:
endangered containers with water.
Section 6. ACCIDENTAL RELEASE MEASURES
6.1
No special measures required
Precautions:
HAZWOPER PPE Level: D
6.2
Containment:
Spills of materia wrien could reach surface waters must be reported to the United States Coast Guard
Prevent material from entering sewers or surface waters
National Rescense renter's eli froe phone number (800)424-8802
6.3
Methods for Cleaning Up:
spilled material and niace nan appropriate chemical waste container. Celan any slippery coating that remains using a
Scoop up large duentities after dusting surfaces with sand or Fuller's earth to prevent sticking. Sweep or scrape up the
detergent/soap stution or snother biodegradable cleaner. Apply sand or other inert granular material to improve

<<<PAGE 6>>>

FROM:
7.1
SportsHealth
Handling:
FAX NO. :
8182488112 аменаа
06-20-85
81:26P
P. 85
Precautions for Safe Handling:
Precautions agains: Fire and Explosion:
No special protective measures required
No special precautinns agams: ireland explasion required
7.2
Storage
None known
Conditions for Storage Rooms and Vessels:
Not applicable
Advice for Storage of Incompatible Materials:
Keep container tightly closed
Further Information for Storage:
• Store in a dry and cool place
8.1
Engineering Controls
Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Ventilation:
Use with adequat 110.
Not necessary
Local Exhaust:
3.2
None known
Associate Substances with Spocific Control Parameters such as Limit Values
8.3
Personal Protection Equipment (PPE)
Respiratory protection is net somally required
Respiratory Protection:
Hand Protection:
Eye Protection:
Recommendation.
i lie id-jer: rubber or vinyl gloves
Recommendation Safety glasses with side shields
dditional protective clethir: or equipment is not normally required. Provide eye bath and safety shower
ther Protective Clothing or Equipment
8.4
Vhen handling do not eat drink smoke or apply cosmetics. Wash thoroughly after handlin
eneral Hygiene and Protection Measures
9.1
Section 9. PHYSICAL AND CHEMICAL PROPERTIES
Physical Stale/t out:
Appearance
Color:
Odor:
NIA
9.2
Flash Point:
Safety Parameters
Density
:HA
Section 10. STABILITY AND REACTIVITY
:30
10.0
General Information:
If stored and handied in accerdance with standard industrial practices no hazardous reactions are known.
10.1
Conditions to Avoia
Jone knowr
10.2
Materials to Avoid:
None known
10.3
If stored and handled in accordance with standard industrial practices and local regulations where applicable:
Hazardous Decomposition Products:
above about 150 C: 302 Fy thraugh oxidation
none known. Measurements have shown the formation of small amounts of formaldehyde at temperatures
10.4
Further Information:
Hazardous palmer ator earen: secur
14.3
Valuation:
Air Transport ICAO-T/IATA-DGR
Not regulated for transport
15.1
U.S. Federal Regulations
Section 15. REGULATORY INFORMATION
TSCA Inventory Status and TSCA Information:
Chemical Substance inventor:
This material on its components are listed on or are in compliance with the requirements of the TSCA
This matere•..:".
TSCA 12(b) Export Notification:
TSCA 12:bi regulated chemicals

<<<PAGE 7>>>

FROM:
Shis product does mat resent 3 SARA 3101312 hazards
8182400112
06-20-05 01:27P
P. 86
15.2
The status of this material with regard to some State Listings has not been determined
U.S. State Regulations
15.3
14808-60-7 Quartz and or 1333 85-4 Carbon Black
California Proposition 65 Carcinogens
This material has at: ceor eva unted for the presence of California Proposition 65 Reproductive Toxins.
California Proposition 65 Reproductive Toxins
15.4
This product has been classified in accordance with the Hazard criteria of CPR and the MSDS contains all the
Canadian Regulations
Information required by the CPR
None
WHMIS Hazard Classes:
DSL Status:
The Canadian US status of this material has not been determined
• • Section 16. OTHER INFORMATION
16.1
Additional Information:
This Material Safety Data Sheet (MSDS) meets the requirements of the Federal OSHA Hazard Communication
Products Regulations (CPR) and the MSDS contains all of the information required by the CPR. This information
Standard (29 CPR 1*10 1203).
this product has been classified according to the hazard criteria of the Controlled
relates to the specific material designated and may not be valid for such material used in combination with any other
date compiled. However, no representation. warranty or guarantee expressed or implied. is made as to its accuracy
materials or in any process Such information is the best of our knowledge and belief accurate and reliable as of the
reliability or completeness
information for mis own particular use. We do not accept liability for any loss or damage that may occur from the use o!
il is the user's responsibility to satisfy himself as to the suitability and completeness of such
this information
its components
extending a license ender valie patents. This MSDS provides selected regulatory information on this product, including
Meting herem shall be construed as a recommendation for uses which infringe valid patents or as
with all applicatie tos. repulatons and laws relating to the product being used
Preeneronged to include all regulations. It is the responsibility of the user to know and comply
16.2
Glossary Terms:
ACGIH - American Conforence of Governmental
ppm - Paris per Million
DOT - Department of Transportation
Industrial Hygienists
STEL - Short Term Exposure Limit
SARA - Superfund Amendments and Reauthorization Act
hPa - Hectopascals
TSCA - Toxic Substances Control Act
OSHA - Occupational Safety ang Health Administration
mPa*s - Mill Pascal-Seconds
TWA - Time Weighted Average
PEL - Permissin Exposire:T:
WHMIS - Canadlan Workplace Hazardous Materials
Identification System
ASTM D56
Flash Point Detormination Methods
Tagliabue (Tag) closed cup
Common Name
ASTM D92. DIN S:379. ISO 2592
ASTM 03278 DIN 55680. ISO3379
ASTM 093. OIN 5:758. 180 2713
Cleveland open cup
Pensky-Martens closed cur
Setaflash or Rapid closed cur
DIN 51755
Abel-Pensky closed cup
16.3
Pressure
Conversion Table:
= 1 Torr: 1 bar = 1000 hPa
Viscosity:
SportsHealth Products
527 W. Windsor Road • Glendale, CA 91204 • Telephone: (818)240-7170
Fax: (818)240-0112

## Provenance

- Official: Yes
- Source: <https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretation%20Files/2005/050155.pdf>
- Source ID: `phmsa`
- SHA-256: `23ea326dda2497ed052efa89b2a7be66dcc4a0e33104ed28b2348acd9a308217`
- Retrieved: 2026-08-20T00:59:31.977Z
- Exported: 2026-08-27T10:04:43.668Z
- Document slug: `phmsa-interpretation-05-0155`

### Source metadata

```json
{
  "materialSubtype": "interpretation",
  "interpretationArea": "hazardous_materials",
  "representation": "full_text_from_official_pdf",
  "companies": [
    "Sports Health Products"
  ],
  "individuals": [
    "Mr. Anthony Woods"
  ],
  "refIds": [
    "05-0155"
  ],
  "catalogDates": [
    "2005-07-21"
  ],
  "catalogParts": [
    173
  ],
  "catalogRowCount": 1,
  "sourceRecordUrls": [
    "https://www.phmsa.dot.gov/node/53456"
  ],
  "linkedAttachmentUrls": [],
  "unavailableResponseUrls": [],
  "duplicateRepresentationUrls": [],
  "citedSections": [
    "173.22"
  ],
  "catalogPageUrls": [
    "https://www.phmsa.dot.gov/regulations/title49/section/17322"
  ],
  "pdfUrls": [
    "https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretation%20Files/2005/050155.pdf"
  ],
  "representations": [
    {
      "viewUrl": "https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretation%20Files/2005/050155.pdf",
      "detailUrl": null,
      "detailHtmlPath": null,
      "pdfUrl": "https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretation%20Files/2005/050155.pdf",
      "pdfArtifactPath": "data/sources/phmsa-interpretations/05-0155-738bd3159a.pdf",
      "pdfArtifactSha256": "54932bee270ca5ad42dc32636f58f527186c16b08d91d073ca6edf2f9a540bc3",
      "extractedTextPath": "data/sources/phmsa-interpretations/05-0155-738bd3159a.v2.txt",
      "extractedTextSha256": "ab74f617a1e7bc8b373845a67d6a56c4912b2a7dcc3d84ac94d1f4b1fee4a7d3",
      "pageCount": 7,
      "extractionVersion": 2
    }
  ],
  "caveat": "Interpretations apply regulations to the facts presented and do not create independently enforceable requirements.",
  "jurisdiction": "US"
}
```
