# Devon Energy Corporation — Hazardous Materials Safety Interpretation

**Citation:** 06-0183  
**Type / status:** guidance / guidance  
**Agency:** Pipeline and Hazardous Materials Safety Administration  
**Effective:** Not stated  
**Published:** 2006-09-08

06-0183 response to Devon Energy Corporation concerning 173.24, 173.24a, 173.306.

## Document text

<<<PAGE 1>>>

of Transportation
U.S. Department
Washington, D.C. 20590
400 Seventh Street, S.W.
ipeline and Hazardou
laterials Safety Administratio
SEP - 8 2006
Mr. Joe Huber
Devon Energy Corporation
Production Superintendent
Ref. No.: 06-0183
7525 Highway 2 NW
Havre, MT 59501
Dear Mr. Huber:
This is in response to your August 2, 2006 letter concerning limited quantity ship nents of natural
gas under the Hazardous Materials Regulations (HMR; 49 CFR Parts 171-180). According to
your letter, you ship natural gas is in IsoTube® cylinders with a capacity of 110 milliliters, at a
pressure of less than 50 psig.
When transported by highway, § 173.306(a)(1) excepts limited quantities of certa n compressed
transportation by air) and the specification packaging requirements when packaged in containers
gases, including compressed natural gas, from labeling (except when intended for further
to the general requirements in § 173.24 and 173.24a, and may not exceed 30 kg (66 pounds)
of not more than 4 fluid ounces capacity (7.22 cubic inches or less). Each package must conform
gross weight. In addition, limited quantity shipments of compressed natural gas must meet all
other requirements in the HMR from which they have not been excepted.
I hope this information is helpful. If you have further questions, please do not hesitate to contait
this office.
Sincerely,
Hotele
Hattie L. Mitchell
Office of Hazardous Materials Standards
Chief, Regulatory Review and Reinvention
173.306(a)(1)
173.24
060183
173.24a

<<<PAGE 2>>>

Drakeford, Carolyn <PHMSA>
From:
Sent:
Gorsky, Susan <PHMSA>
Subject:
To:
Wednesday, August 02, 2006 3:00 PM
Pollack
FW: HazMat Certification
Drakeford, Carolyn <PHMSA>
$113.306((
Attachments:
Document (23).pdf
Cylinders
Please make this an interp.
Thanks.
06-0183
From: Romero,
-----Original Message-----
Sent: Wednesday, August 02, 2006 2:50 PM
Pat <PHMSA>
Subject: Fw: HazMat Certification
To: Gorsky, Susan < PHMSA>
Document (23).pdf
Susan.
Please fwd 2 cyl
(1 MB)
Please help.
Pat
ech: cc me
From: Stone, Cassie
-----Original Message-.
To: Romero,
CC: Halter, Bev
Pat < PHMSA>
Sent: Mon Jul 31 11:56:06 2006
Subject: FW: HazMat Certification
currently wish to ship back to the lab some aluminum cylinders which were provided by the
These cylinders are used for sending samples of natural gas to the lab for analysis. we
lab. They are pressure rated to 100 psi and filled at less than 50 psi with natural gas
length. According to Isotech Laboratories Inc. these tubes and the shipping box are DOT
from the wellhead. We currently have 20 tubes that are approx 1" in diareter and 7" in
need to make shipping arrangements as soon as possible.
approved. Please see attachment. Your quick response would be greatly apcreciated as we
Joe Huber
Devon Energy Corporation
Production Superintendent
Havre, MT
Cell
Office (406) 265-0181
(406) 945-5198
From: Pat. Romero@dot.gov [mailto:Pat.Romero@dot.gov]
To: Stone, Cassie
Sent: Monday, July 31, 2006 1:54 AM
Subject: RE: HazMat Certification
Aloha Cassie
1

<<<PAGE 3>>>

Please tell me what size will the cylinders be PSI?
Thanks for the inquiring. I will send you a package so you can start your training.
cylinders to be sold over the counter to the general public or another commercial vendor?
Would you be shipping by air, are the
Are these US DOT cylinders? Are you filling and charging compress gases?
Pat
I'm on a business trip until the end of this week...however; I'll be getting some help.
Patricio F Romero
Office of Hazardous Materials Initiatives and Training
Pipeline and Hazardous Materials Safety Administration
U.S. Department of Transportation
Hazardous Materials Safety Assistance Team
Western Region
3401 Centrelake Drive, Suite 550B
Ontario, CA 91761
website: http://hazmat.dot.gov<BLOCKED:: http://hazmat.dot.gov/>
Voice (909) 937-7225, Fax (909) 390-5142
From: Stone, Cassie [mailto:Cassie.Stone@dvn.com]
To: Romero,
Sent: Friday, July
28, 2006 9:42 AM
Subject: HazMat Certification
Cc: Huber, Joe; Halter, Bev
Pat,
Our Street address is Devon Energy, 7525 Hwy 2 NW, Havre, MT 59501.
Also, you can contact me @ 406-265-5521.
We will be shipping Compressed Natural Gas in stainless steal tubes. Thank you very much
for the information.
Cassie
Cassie Stone
Field Technician
Devon Energy
P.O. Box 1644
7525 Hwy 2 NW
Havre, MT 59501
Phone: (406) 265-0684
2

<<<PAGE 4>>>

Fax: (406) 265-4938
Email: cassie.stone@dvn.com
Confidentiality Warning: This message and any attachments are intended only for the use of
the intended recipient (s), are confidential, and may be privileged. If you are not the
intended recipient, you are hereby notified that any review, retransmission, conversion to
attachments is strictly prohibited. If you are not the intended recipient, please notify
lard copy, copying, circulation or other use of all or any portion of this message and any
your system.
the sender immediately by return e-mail, and delete this message and any attachments from

<<<PAGE 5>>>

A ISOTECH
ISOTECH LABORATORIES, INC. WWW.ISOTECHLABSR
1308 Parkland Court Champaign IL 61821 • (217) 398-3490 - Fax: (217) 39B-3403 - isotubes@isotechlabs.com
IsoTube® Gas Sampling Equipment
Isolube
For Mud-gas sampling:
•Extremely durable and reliable resulting in reduced sample loss.
•Easier to use than gas bags.
•Can be configured in line with the normal mud-logging equipment.
• Less bulky to store than gas bags (shipped 25 per box).
•Can be legally shipped on both passenger and cargo aircraft according to
IATA regulations.**
•HAZMAT Packaging is included. UN Certified shipping boxes meet all DOT
Iso Tubes®.
and IATA requirements for shipment of flammable gases in
•HAZMAT packaging was developed and tested specifically for use with the
solube
•Environmentally "friendly" IsoTubes® are > 99.9% recyclable; IsoTubes®
IsoTubes®.
returned to Isotech result in a substantial reduction in waste compared
to gas bags.
solube
As a substitute for cylinders:
•Iso Tubes® are acceptable for pressurized sampling (limit: 100 psig;
requires IsoTube® Wellhead Sampling Device).
•IsoTube® shipping boxes are approved for air shipment, rapid return of
samples to the laboratory is facilitated.
•Smaller size and weight result in a reduction in shipping costs
(volume ~110 ml).
to do so; shipping instructions are included with each box of IsoTubes®)
**(Hazardous materials can only be shipped by someone properly certified

## Provenance

- Official: Yes
- Source: <https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretation%20Files/2006/060183.pdf>
- Source ID: `phmsa`
- SHA-256: `1d065b7e3c827d4d470353d0d33ed1447d948307e0b747b9b459871d639ae91a`
- Retrieved: 2026-08-20T00:59:31.977Z
- Exported: 2026-08-25T07:06:23.318Z
- Document slug: `phmsa-interpretation-06-0183`

### Source metadata

```json
{
  "materialSubtype": "interpretation",
  "interpretationArea": "hazardous_materials",
  "representation": "full_text_from_official_pdf",
  "companies": [
    "Devon Energy Corporation"
  ],
  "individuals": [
    "Mr. Joe Huber"
  ],
  "refIds": [
    "06-0183"
  ],
  "catalogDates": [
    "2006-09-08"
  ],
  "catalogParts": [
    173
  ],
  "catalogRowCount": 3,
  "sourceRecordUrls": [
    "https://www.phmsa.dot.gov/node/50601"
  ],
  "linkedAttachmentUrls": [],
  "unavailableResponseUrls": [],
  "duplicateRepresentationUrls": [],
  "citedSections": [
    "173.24",
    "173.24a",
    "173.306",
    "173.306(a)(1)"
  ],
  "catalogPageUrls": [
    "https://www.phmsa.dot.gov/regulations/title49/section/17324",
    "https://www.phmsa.dot.gov/regulations/title49/section/17324a",
    "https://www.phmsa.dot.gov/regulations/title49/section/173306"
  ],
  "pdfUrls": [
    "https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretation%20Files/2006/060183.pdf"
  ],
  "representations": [
    {
      "viewUrl": "https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretation%20Files/2006/060183.pdf",
      "detailUrl": null,
      "detailHtmlPath": null,
      "pdfUrl": "https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretation%20Files/2006/060183.pdf",
      "pdfArtifactPath": "data/sources/phmsa-interpretations/06-0183-7316775af2.pdf",
      "pdfArtifactSha256": "822dbe334676bd13d9af5b06b4152d07a3bc436df62bcfc416faa4036f2cddfc",
      "extractedTextPath": "data/sources/phmsa-interpretations/06-0183-7316775af2.v2.txt",
      "extractedTextSha256": "8629fdaf56d4178ab988377eedc8cb5156cfc93e8d4acf7f6a68f0e63a4f83d8",
      "pageCount": 5,
      "extractionVersion": 2
    }
  ],
  "caveat": "Interpretations apply regulations to the facts presented and do not create independently enforceable requirements.",
  "jurisdiction": "US"
}
```
