# Toth Aluminum Corporation — Hazardous Materials Safety Interpretation

**Citation:** 98-0364  
**Type / status:** guidance / guidance  
**Agency:** Pipeline and Hazardous Materials Safety Administration  
**Effective:** Not stated  
**Published:** 1999-01-07

98-0364 response to Toth Aluminum Corporation concerning 172.102.

## Document text

<<<PAGE 1>>>

•
U.S. Department
of Transportation
400 Seventh Street, S.W.
Washington, D.C.
Special Programs
Research and
20590
Administration
JAN - 7 1999
Mr. Charles Toth, Jr.
Operations Manager
Ref. No. 98-0364
Toth Aluminum Corporation
2141 Toth
Street
Vacherie, LA 70090
Dear Mr. Toth:
This is in response to your letter dated December 2, 1998,
concerning the use of stainless steel to meet the requirements
of Special Provision B6 in the Hazardous Materials Regulations
(HMR; 49 CFR Parts 171-180) -
Special Provision B6 of the Hazardous Materials Regulations
opinion of this
specifies that "packagings shall be made of steel." It is the
…Office that the requirements of Special
stainless steel.
Provision B6 are satisfied with any bulk packaging made of
I hope this satisfies your request.
Sincerely,
Office of Hazardous Materials Standards

<<<PAGE 2>>>

DEC-02-1998
17:05
1 504 265 7795
P. 02/86,
Toth Aluminum Corporation
98-0364
December 2, 1998
BAH
Edward Mazzulo
Director - OHMS
$172.102
36c
USDOT--Attn: DHM 10
Research and Special Programs Administration
400 7th St SW
Washington, D.C. 20597
Dear Sir:
I am in the process of shipping Silicon Tetrachloride (UN 1818) in bulk via a MC 312
tank truck trailer with a shell constructed of 0.180" thick Manufacture T316SS-2B finish
in accordance with 49CFR173.242. Attached are the complete specifications on the
tank truck trailer.
However, special provision B6 States "Packagings shall be made of steel."
Subsequently, Officer Ronnie Mayeaux of the Louisiana State Police Hazardous
Materials Division, interprets this as excluding stainless steel. Therefore, he indicates
that this trailer does not meet USDOT transportation 49CFR173.242 because it is made
of stainless steel and not steel.
Would you be so kind as to verify that the stainless steel trailer listed above does meet
USDOT transportation requirement. Time is of the importance and a prompt answer is
greatly appreciated, if possible kindly respond via fax to (504) 265-7795, and follow up
with an original copy in the mail. My mailing address is: Charles Toth Jr., C/O Toth
Aluminum Corporation, P.O. Box 250, Vacherie, LA 70090. If you have any further
291-4698.
questions, please call me at (504) 265-8181 or Mr. Will Farrar of the US EPA at (225)
Thank you
OTH ALUMINUM GQRPORATION
Galory.
Charles Toth Jr.
Operations Manager
CC: Will Farrar -- US EPA
Headquariors:
Highway 18-River Road, Vacherie, LA 70090 U.S.A.
Mailing Address:
P. O. Box 250,
Vacherie, LA
70090
U.S.A.
Phone: 504 265-8181
Fax: 504 265-7795
Cable Address: IACOR

<<<PAGE 3>>>

.DEC-02-1998:
17:05
3: 30PM: MatIock Inc.
1 504 265 7795
: 302 428 3208
P.03/06
M
REC'D NOV 2 4 1998
mallack leasing corporatian
Ono Rollins Plara, P.O. Bax B774, Wuminglon, DE 19899 • 1-800-828-5229 Exe 3164
November 24, 1998
Mr. Charles Toth, Jr.
2141 Tot/ Stroet
Tuth Aluminum Corporation
Vacheric, LA 70090
Mr. Toth:
Per your discussions with Bill DeNike, arached please find specifications for the MC 312 in Houston, TX.
If you have any questions or require additional information please do not hesitate to call me at 800-628-
5225 X2834.
Regards,
Donna S. Ricci
Donna S. Ricci
Customer Service Manger
N0U-24-1998
14:38
302 426
3298
95%
P.01

<<<PAGE 4>>>

DEC-02-1998
17:05
11-25-98: 3:39PM: Motluck Inc.
1 504 265 7795
P. 04/06
: 302 428 3298
* 2/ 4
10/10/96
(A6704)
FLEET ACCEPTANCE CORP.
Page 2 of 4
1.
TANK SHELL & FINISH, ,180" MANUF. T316SS-2B FINISH
2.
SHBLL HEAD & FINISH:
POLISH OUTSIDE, ASME DISHED AND FLANGED, BUTT WELDED
.220" MANUE. T316SS-HRAP FINISH INSIDE, 4E
3.
24"
INTERIOR HELD FINISH: W-2 SNAGPROOF WITH W-3 GROUND FLUSH ON BOTTOM
EXTERIOR WELD FINISH: W-Z SNAGPROOF
$.
BAFFLES: NONE
5.
MANHOLS: (1) 20" FULL OPENING BETTS 8350-LC-E, (T316LSS) ASNE
NEAR CENTER OF TANK
APPROVED, 6 LUG WITH NON-ASBESTOS WITH TEFLON WOVEN GASKÉT, LOCATED
5. HBAT: NONE
1. EXTERIOR RINGS: 10 GA. SS 2-3/4" HI HAT CHANNEL, CONTINUOUS WELD
8. FRAMES
BOLTER&: 10 GA. T304SS
LONGMEMBBR&: 7 GA. T304SS ABOVE SUBFRAMES ONLY
9.
INSULATION: NONE
UNDERLAYMENT: NONE
10.
JACKET: NONE
JACKET HEADE: NONE
11.
BLACK PVC DRAIN HOSE ON CURBSIDE
SPILLDAM: T304-2B SS AROUND MANHOLE WITH SLOPED FLOOR AND (1) 1f"
OVERTURNS: D.O.I. OVERTURN PROTECTION BUILT INTO ENDS OF DAM AND AT
LAST RING
12.
MOUNT CURBSIDE TO WALKWAY BELOW SPILLDAM
LADDER: (1) SS 18" WIDE WITH KNURLED RUNGS AND SIDE HAND RAILS,
HAND RAIL: (1) FULL LENGTH OF WALKWAY LOCATED ABOVE LADDER
13.
WALKMAY: 12" WIDE SS DIAMOND TYPE ON CURBSIDE AT APPROX. 3:00 FULI
LENGTH OF SPILLDAM WITH GRAB RAILS EACH END
14.
XINGPIN PHIE: HEAVY-DUTY BOLT-ON 4" INCREMENTS, 2" ADJUSTMENTS
15.
CRANK, AND T304SS FRAME
LANDING GEAR: AUSTIN LIFT-PAK 2-SPEED WITH SAND SHOES, CURBSIDE
16.
SUSPENSIONS REYCO MI. VERNON MODEL 88 WITH 3-LEAF SPRINGS AND
FLANGEMOUNT HANGERS, T3OASS FRAME
1%.
AXLES: INGERSOLL E22S 5" ROUND (22,500# RATING)
18.
BRAKE: QUICK CHANGE, 16-1/2 X 7 S-CAM WITH ROCKWELL AUTOMATIC SLACK
ADJUSTERS, NO DUST SHIELDS (20,000* RATING)
19.
HOBODOMETER: NONE
HUBS: WALTHER EMC 10 STUD WITH OUTBOARD MOUNTED REYCO DRUMS
NOU-24-1998 14:38
302 425 3298
P.02
-

<<<PAGE 5>>>

DEC-02-1998
17:06
11-24-98: 9:351M:MGtlsCk Inc.
1 504 265 7795
P.05/06
: 302 420 3298
- 31 4
10/10/96
(A6704)
FLEET ACCEFTANCE CORP.
Page 3 of 4
20.
9BALS: STEMCO GUARDIAN
21.
RIMB/WHBELS: 8.25 * 24,5 STEEL DISC, FACTORY WHITE
22.
TIRES: 11R-24.5 (G) BRIDGESTONE R194 14 PLY RADIALS
23.
FENDERS: ALUMINUM CONTOUR FRONT AND REAR WITH SS BRACES
34.
MUDFLARS: 2 PAIR BRENNER PLASTIC ANTI-SAIL
25.
BUMPER: (1) 4" X B" X30A9S RECT. TUBE, SPLIT TYPE, 60" WIDE, PER DOT
DOT NHTSA RULES
RSPA SPECS, AND (1) 4" X 4" T30455 SQ. TUBE, 88" WIDE, PER IMPENDING
26.
TIRE CARRIER: NONE
27.
WIRING: TRUCK-LITE HARNESS EXPOSED
LIGHTE| 12-VOLT TRUCK-LITE IN SS BOXES WITH SIDE MARKERS TIED INTO
TURN SIGNALS
NOSE BOX: 7 WAY BERG ON FRONT CROSSMEMBER
28.
HOSE CARRIBR: (1) 6" * 8" X 21' SS HOSE TROUGH WITH DRAIN AT REAR,
MOUNT CURBSIDE
39-
OUTLET: (1) 4" SS MOUNTING PAD
HYDRAULIC VALVE (*CH45613-99)
EMERGENCY VALVE: (1) 4" X 3" X 90° SS BETTE EXTERNAL CHEMICAL
HYDRAULIC PUMP: ENERPAC LOCATED AT REAR ON ROADSIDE RUNNING GEAR
FRAME RAIL
VALVE
PIPING: (1) 3" SS SPOOL PIECE BETWEEN EMERGENCY VALVE AND OUTLET
OUTLET VALVB: (1) 3" SS GATE VALVE (ALLEGHENY SSG 1013)
FITTINGS:
3" FLANGED NOZZLE WITH 3" SS ADAPTER WITH SS DUST CAP
PUMP OFF LINE: NONE
SEAL TABS: PROVISIONS FOR GOVERNMENT SEALS ON ALL OPENINGS
TOP UNLOAD: (1) 4" SS A.N.S.I. FLANGED NOZZLE WITH BLANK FLANGE
CABLER: PLASTIC COATED ON ALL CAPS
LOCATED AT TOP REAR ABOVE SUMP FOR FUTURE TOP UNLOAD
30.
VENTS: (1) 4" GIRARD FLANGED PRESSURE RELIEF VENT (GEDOT-407AR) 35
TEFLON ENCAPSULATED O-RING, MOUNTED ON A 4" FLANGED PIPE WITH
PSI MAWP, RATED AT A TEST PRESSURE OF 52.5 PSI, COMPLETE WITH P
PRESSURE GAUGE AND AIR INLET ASSEMBLY, LOCATED TO REAR DE MANHOLE IN
SPILLDAM
VACUUM RELIBE: NONE - DESIGNED FOR FULL VACUUM
31.
CLEANOUTE: NONE
32.
THERMOMETER: NONE
33.
CAPACITY INDICATOR: NONE
34. CABINET: NONE
NOU-24-1999 14:39
PAINT: CARBON STEEL PARTS DUPONT IMRON 5000 GRAX #NO427
302 426 3298
P.03

<<<PAGE 6>>>

DEC-02-1998
17:06
1 504 265 7795 P.06/06
11-24-98: 3:39PM:Motlgck Inc.
:302 426 3298
• •
# 4/
10/10/96
(A6704)
PUBBY ACCEPTANCE CORP.
Page 4 OF 4
CONSPICUITY MARKING: INSTALL RETRO-REFLECTIVE TAPE IN ACCORDANCE
WITH N.H.I.S.A. REQUIREMENTS
37.
OTHER:
DOT 8IGN HOLDERS: (4) ALUMINUM SLIDE IN STYLE SIGN HOLDERS WITH
CALIBRATION: THEORETICAL COMPUTER PRINTOUT IN 1/4" INCREMENTS
MOUNTED ON FRAMING
SIDES MOUNTED ON RINGS APPROX. 60" FROM GROUND, FRONT AND REAR
CERTIPICATE HOLDBR: (1) BETTS PS-1 MOUNTED CURBSIDE ON LANDING GEAR
FRAME
N0U-24-1998
14:39
302 426 3298
P.D4
TOTAL P.06

<<<PAGE 7>>>

DEC-02-1998
17:05
1 504 265 7795
P.01/06
Toth Aluminum Corporation
FACSIMILE MESSAGE
# -
TO TAX No: 202-366-3012
WE ARE TRANSMITTING INE FOLLOWING MESSAGE BY:
CANNON FAX-730
TELEPIONE: 504-265~7795
DALE:
Lec. 2,1998
10:
duard mazzula
FROM:
Charles Toth .
NUMBER OF PAGES:
(INCLUDES TUIS COVER PAGE)
*******
**********
****
IF YOU DO NOT RECEIVE ALL YO
PLEASE CALL OUR CONFIRMATION No.: 504-265-8181
PAGES PLUS COVER PAGE,
MESSAGE:
•
•
Icadquariers: Iligliway 18-River Road, Vacheric, IN 70090 U.S.A.
Mailing Address:
P. O. Box 250,
Valerie, LA
70090
U.S.A.
Phone: 504 265-8181
Fax: 501 265-7795
Cable Address: TACOR

## Provenance

- Official: Yes
- Source: <https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretation%20Files/1998/980364.pdf>
- Source ID: `phmsa`
- SHA-256: `5419b7756f39c20f7e58ff8941ef44e9da057eab40b6ea736b6b426fdfa9f59f`
- Retrieved: 2026-08-20T00:59:31.977Z
- Exported: 2026-08-23T09:06:28.596Z
- Document slug: `phmsa-interpretation-98-0364`

### Source metadata

```json
{
  "materialSubtype": "interpretation",
  "interpretationArea": "hazardous_materials",
  "representation": "full_text_from_official_pdf",
  "companies": [
    "Toth Aluminum Corporation"
  ],
  "individuals": [
    "Mr. Charles Toth, Jr."
  ],
  "refIds": [
    "98-0364"
  ],
  "catalogDates": [
    "1999-01-07"
  ],
  "catalogParts": [
    172
  ],
  "catalogRowCount": 1,
  "sourceRecordUrls": [
    "https://www.phmsa.dot.gov/node/68651"
  ],
  "linkedAttachmentUrls": [],
  "unavailableResponseUrls": [],
  "duplicateRepresentationUrls": [],
  "citedSections": [
    "172.102"
  ],
  "catalogPageUrls": [
    "https://www.phmsa.dot.gov/regulations/title49/section/172102"
  ],
  "pdfUrls": [
    "https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretation%20Files/1998/980364.pdf"
  ],
  "representations": [
    {
      "viewUrl": "https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretation%20Files/1998/980364.pdf",
      "detailUrl": null,
      "detailHtmlPath": null,
      "pdfUrl": "https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretation%20Files/1998/980364.pdf",
      "pdfArtifactPath": "data/sources/phmsa-interpretations/98-0364-fdc53d52f5.pdf",
      "pdfArtifactSha256": "d3d626ac463a4c579f98ff477e0b6fc76d7db7e7d82848409881ba0bbda0925d",
      "extractedTextPath": "data/sources/phmsa-interpretations/98-0364-fdc53d52f5.v2.txt",
      "extractedTextSha256": "6b386b5fe3a0af41438e3811926100644c4a5295bb91a22830bb51a6aadebeae",
      "pageCount": 7,
      "extractionVersion": 2
    }
  ],
  "caveat": "Interpretations apply regulations to the facts presented and do not create independently enforceable requirements.",
  "jurisdiction": "US"
}
```
