# The Australian Gas Light Company — Pipeline Safety Interpretation

**Citation:** PI-78-015  
**Type / status:** guidance / guidance  
**Agency:** Pipeline and Hazardous Materials Safety Administration  
**Effective:** Not stated  
**Published:** 1978-06-06

PI-78-015 response to The Australian Gas Light Company concerning 192.105.

## Document text

<<<PAGE 1>>>

Mr. C. B. Rumble
The Australian Gas Light Company
P.O. Box 944
North Sydney NSW 2060
Australia
Dear Mr. Rumble:
This responds to your letter of May 2, 1978, concerning the requirements of Section 192.105(b)
of Part 192, Transportation of Natural and Other Gas by Pipeline: Minimum Federal Safety
Standards. This Section limits the design pressure of steel pipe that has been cold worked to meet
SMYS to 75 percent of the pressure determined under Section 192.105(a) if the pipe is heated,
other than by welding, to 600mF or more.
The term "cold worked" does not relate to thermo-mechanically rolled steel plate that is later
made into pipe. It does relate to pipe that has been "cold expanded."
The 600mF limitation on the heating of such "cold worked" pipe was adopted directly from
U.S.A.S. B31.8, Code for Pressure Piping, Gas Transmission and Distribution Piping Systems,
1968 edition.
If we may assist further please let us know.
Sincerely,
/signed/
Cesar DeLeon
Associate Director for
Pipeline Safety Regulation
Materials Transportation Bureau
DB
C:\WP51\INTERPRT\192\105\78-06-06
1

<<<PAGE 2>>>

The Director,
Office of Pipeline Safety Operations,
Department of Transportation
Materials Transportation Bureau,
400, 6th Street, S.W.,
Washington, D. C. 20590,
U.S.A.
Dear Sir,
Minimum Federal Safety Standards
Part 192 Gas Pipelines
As a member of a Task Group working on the revision of certain sections of the Australian
Standard AS2697, Gas Pipeline Code, on behalf of the Standards Association of Australia, I have
been requested to contact your office for elucidation on Paragraph 192.105(b).
Whilst the clause related to, appears specific in its intent, there are two questions I am requested
to direct to you for assistance:
1. Does the term "cold worked" also relate to thermo-mechanically (controlled rolled) steel
plate, which is subsequently used for pipe manufacture and supplied as pipe in the "non
expanded" condition, or does it only relate to pipe in the "cold expanded" condition?
2. Could you advise on the origin of the 600mF limitation on the heating of such "cold
worked" pipe.
Trusting that you are able to assist in this matter.
Yours faithfully,
THE AUSTRALIAN GAS LIGHT COMPANY,
C. B. Rumble,
Chief Inspector - Engineering Division
DB
C:\WP51\INTERPRT\192\105\78-06-06
2

<<<PAGE 3>>>

C:WPS INTERPRT1921105178-06-06

## Provenance

- Official: Yes
- Source: <https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretation%20Files/Pipeline/1978/PI78015.pdf>
- Source ID: `phmsa`
- SHA-256: `3ba07eb903a6a7f6699b8ba4bd5fa7290f88c5b5b8183400061923d6c0ea7e8f`
- Retrieved: 2026-08-20T00:59:31.977Z
- Exported: 2026-08-24T15:58:43.229Z
- Document slug: `phmsa-interpretation-pi-78-015`

### Source metadata

```json
{
  "materialSubtype": "interpretation",
  "interpretationArea": "pipeline_safety",
  "representation": "full_text_from_official_pdf",
  "companies": [
    "The Australian Gas Light Company"
  ],
  "individuals": [
    "Mr. C. B. Rumble"
  ],
  "refIds": [
    "PI-78-015"
  ],
  "catalogDates": [
    "1978-06-06"
  ],
  "catalogParts": [
    192
  ],
  "catalogRowCount": 1,
  "sourceRecordUrls": [
    "https://www.phmsa.dot.gov/node/56981"
  ],
  "linkedAttachmentUrls": [],
  "unavailableResponseUrls": [],
  "duplicateRepresentationUrls": [],
  "citedSections": [
    "192.105",
    "192.105(b)"
  ],
  "catalogPageUrls": [
    "https://www.phmsa.dot.gov/regulations/title49/section/192105"
  ],
  "pdfUrls": [
    "https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretation%20Files/Pipeline/1978/PI78015.pdf"
  ],
  "representations": [
    {
      "viewUrl": "https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretation%20Files/Pipeline/1978/PI78015.pdf",
      "detailUrl": null,
      "detailHtmlPath": null,
      "pdfUrl": "https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretation%20Files/Pipeline/1978/PI78015.pdf",
      "pdfArtifactPath": "data/sources/phmsa-interpretations/pi-78-015.pdf",
      "pdfArtifactSha256": "adcd1d592fb8a37a625dc404fa6ef7d7bd1383cf274eeef55d82fd520ecfd893",
      "extractedTextPath": "data/sources/phmsa-interpretations/pi-78-015.v2.txt",
      "extractedTextSha256": "8b11129754d58ad82428bf73616402bde7a31c541a47c6c48a6bb8bd5f42d0e1",
      "pageCount": 3,
      "extractionVersion": 2
    }
  ],
  "caveat": "Interpretations apply regulations to the facts presented and do not create independently enforceable requirements.",
  "jurisdiction": "US"
}
```