{"operation":"document","citation":"49 CFR 178.255-14","title":"-14 Marking.","source_type":"regulation","agency":"Pipeline and Hazardous Materials Safety Administration","status":"current","official":true,"published_on":null,"effective_on":"2026-08-18","summary":"(a) In addition to markings required by Section VIII of the ASME Code (IBR, see § 171.7 of this subchapter), every tank shall bear permanent marks at least 1/8-inch high stamped into the metal near the center of one of the tank heads or stamped into a plate permanently attached to the tank by means ","machine_formats":{"json":"https://regulus.evalyn.ai/document/49-cfr-178-255-14.json","markdown":"https://regulus.evalyn.ai/document/49-cfr-178-255-14.md"},"app_url":"https://regulus.evalyn.ai/document/49-cfr-178-255-14","source_url":"https://www.ecfr.gov/on/2026-08-18/title-49/section-178.255-14","body":"(a) In addition to markings required by Section VIII of the ASME Code (IBR, see § 171.7 of this subchapter), every tank shall bear permanent marks at least 1/8-inch high stamped into the metal near the center of one of the tank heads or stamped into a plate permanently attached to the tank by means of brazing or welding or other suitable means as follows:\n\nManufacturer's name ______________ Serial No. DOT specification Nominal capacity ______________ (gallons) Tare weight ______________ (pounds) Date of manufacture\n\n(b) [Reserved]\n\n[29 FR 18972, Dec. 29, 1964. Redesignated at 32 FR 5606, Apr. 5, 1967, and amended by Amdt. 178-67, 46 FR 49906, Oct. 8, 1981; 68 FR 75750, Dec. 31, 2003]","truncated":false,"body_characters":692}