{"operation":"document","citation":"49 CFR 178.356-4","title":"Required markings.","source_type":"regulation","agency":"Pipeline and Hazardous Materials Safety Administration","status":"historical","official":true,"published_on":null,"effective_on":"2013-10-01","summary":"(a) Marking must be as prescribed in § 178.3.\n\n(b) Marking on the outside of each overpack must be as follows:\n\n(1) “USA-DOT-20PF-1” or “-2,” as appropriate, and if the entire liner is made of stainless steel, additional marking such as “3041-SS” to indicate the type of stainless steel used.\n\n(2) “T","machine_formats":{"json":"https://regulus.evalyn.ai/document/49-cfr-178-356-4.json","markdown":"https://regulus.evalyn.ai/document/49-cfr-178-356-4.md"},"app_url":"https://regulus.evalyn.ai/document/49-cfr-178-356-4","source_url":"https://www.govinfo.gov/app/details/CFR-2013-title49-vol3/CFR-2013-title49-vol3-sec178-356-4","body":"(a) Marking must be as prescribed in § 178.3.\n\n(b) Marking on the outside of each overpack must be as follows:\n\n(1) “USA-DOT-20PF-1” or “-2,” as appropriate, and if the entire liner is made of stainless steel, additional marking such as “3041-SS” to indicate the type of stainless steel used.\n\n(2) “TARE WT: xxx lbs.” where xxx is the tare weight of the assembled overpack without the inner container.\n\n(3) Year of manufacture.\n\n[Amdt. 178-35, 39 FR 45247, Dec. 31, 1974. Redesignated by Amdt. 178-97, 55 FR 52716, Dec. 21, 1990, as amended at 63 FR 37462, July 10, 1998]","truncated":false,"body_characters":571}