{"operation":"document","citation":"49 CFR 178.360-2","title":"Manufacture.","source_type":"regulation","agency":"Pipeline and Hazardous Materials Safety Administration","status":"historical","official":true,"published_on":null,"effective_on":"2013-10-01","summary":"The ends of the vessel must be fitted with screw-type closures or flanges (see § 178.360-4), except that one or both ends of the vessel may be permanently closed by a welded or brazed plate. Welded or brazed side seams are authorized.\n\n[Amdt. 178-35, 39 FR 45245, Dec. 31, 1974. Redesignated by Amdt.","machine_formats":{"json":"https://regulus.evalyn.ai/document/49-cfr-178-360-2.json","markdown":"https://regulus.evalyn.ai/document/49-cfr-178-360-2.md"},"app_url":"https://regulus.evalyn.ai/document/49-cfr-178-360-2","source_url":"https://www.govinfo.gov/app/details/CFR-2013-title49-vol3/CFR-2013-title49-vol3-sec178-360-2","body":"The ends of the vessel must be fitted with screw-type closures or flanges (see § 178.360-4), except that one or both ends of the vessel may be permanently closed by a welded or brazed plate. Welded or brazed side seams are authorized.\n\n[Amdt. 178-35, 39 FR 45245, Dec. 31, 1974. Redesignated by Amdt. 178-97, 55 FR 52716, Dec. 21, 1990, as amended at 63 FR 37462, July 10, 1998]","truncated":false,"body_characters":378}