# Manufacture.

- **operation:** document
- **citation:** 49 CFR 178.360-2
- **title:** Manufacture.
- **source type:** regulation
- **agency:** Pipeline and Hazardous Materials Safety Administration
- **status:** historical
- **official:** true
- **published on:** Not available
- **effective on:** 2013-10-01
- **summary:** The ends of the vessel must be fitted with screw-type closures or flanges (see § 178.360-4), except that one or both ends of the vessel may be permanently closed by a welded or brazed plate. Welded or brazed side seams are authorized.

[Amdt. 178-35, 39 FR 45245, Dec. 31, 1974. Redesignated by Amdt.
- **machine formats:** - **json:** https://regulus.evalyn.ai/document/49-cfr-178-360-2.json
- **markdown:** https://regulus.evalyn.ai/document/49-cfr-178-360-2.md
- **app url:** https://regulus.evalyn.ai/document/49-cfr-178-360-2
- **source url:** https://www.govinfo.gov/app/details/CFR-2013-title49-vol3/CFR-2013-title49-vol3-sec178-360-2
**body:**

The ends of the vessel must be fitted with screw-type closures or flanges (see § 178.360-4), except that one or both ends of the vessel may be permanently closed by a welded or brazed plate. Welded or brazed side seams are authorized.

[Amdt. 178-35, 39 FR 45245, Dec. 31, 1974. Redesignated by Amdt. 178-97, 55 FR 52716, Dec. 21, 1990, as amended at 63 FR 37462, July 10, 1998]
- **truncated:** false
- **body characters:** 378