{"operation":"document","citation":"49 CFR 178.360-3","title":"Dimensions.","source_type":"regulation","agency":"Pipeline and Hazardous Materials Safety Administration","status":"historical","official":true,"published_on":null,"effective_on":"2013-10-01","summary":"(a) The inside diameter of the vessel may not exceed 30 cm (12 inches) exclusive of flanges for handling or fastening devices and must have wall thickness and length in accordance with the following:\n\nInside diameter maximum Inches Cm Threaded closure Inches Mm Wall thickness minimum—Flanged closure","machine_formats":{"json":"https://regulus.evalyn.ai/document/49-cfr-178-360-3.json","markdown":"https://regulus.evalyn.ai/document/49-cfr-178-360-3.md"},"app_url":"https://regulus.evalyn.ai/document/49-cfr-178-360-3","source_url":"https://www.govinfo.gov/app/details/CFR-2013-title49-vol3/CFR-2013-title49-vol3-sec178-360-3","body":"(a) The inside diameter of the vessel may not exceed 30 cm (12 inches) exclusive of flanges for handling or fastening devices and must have wall thickness and length in accordance with the following:\n\nInside diameter maximum Inches Cm Threaded closure Inches Mm Wall thickness minimum—Flanged closure Length maximum Inches Cm 2 5 3/32 2.5 Not less than that prescribed for schedule 40 pipe 16 41 6 15 1/8 3.2 72 183 12 30 1/4 6.5 72 183\n\n(b) [Reserved]\n\n[Amdt. 178-35, 39 FR 45245, Dec. 31, 1974. Redesignated by Amdt. 178-97, 55 FR 52716, Dec. 21, 1990; 66 FR 45387, Aug. 28, 2001]","truncated":false,"body_characters":582}