# -13 Inner container manway nozzle and cover.

- **operation:** document
- **citation:** 49 CFR 179.220-13
- **title:** -13 Inner container manway nozzle and cover.
- **source type:** regulation
- **agency:** Pipeline and Hazardous Materials Safety Administration
- **status:** current
- **official:** true
- **published on:** Not available
- **effective on:** 2026-08-18
- **summary:** (a) Inner container manway nozzle must be of approved design with access opening at least 18 inches inside diameter, or at least 14 inches by 18 inches obround or oval.

(b) Manway covers must be of approved type. Design must provide a secure closure of the manway and must make it impossible to remo
- **machine formats:** - **json:** https://regulus.evalyn.ai/document/49-cfr-179-220-13.json
- **markdown:** https://regulus.evalyn.ai/document/49-cfr-179-220-13.md
- **app url:** https://regulus.evalyn.ai/document/49-cfr-179-220-13
- **source url:** https://www.ecfr.gov/on/2026-08-18/title-49/section-179.220-13
**body:**

(a) Inner container manway nozzle must be of approved design with access opening at least 18 inches inside diameter, or at least 14 inches by 18 inches obround or oval.

(b) Manway covers must be of approved type. Design must provide a secure closure of the manway and must make it impossible to remove the cover while the tank interior is under pressure.

(c) All joints between manway covers and their seats must be made tight against leakage of vapor and liquid by use of suitable gaskets.

(d) Manway covers must be cast, forged, or fabricated metal complying with subsection § 179.220-7(g) of this section.

(e) A seal must be provided between the inner container manway nozzle and the opening in the outer shell.

[Amdt. 179-9, 36 FR 21341, Nov. 6, 1971]
- **truncated:** false
- **body characters:** 760