# Miter Joints

- **operation:** document
- **citation:** 192.233
- **title:** Miter Joints
- **source type:** regulation
- **agency:** Arkansas Public Service Commission
- **status:** current
- **official:** true
- **published on:** Not available
- **effective on:** Not available
- **summary:** § 192.233 Miter Joints (a) A miter joint on steel pipe to be operated at a pressure that produces a hoop stress of 30 percent or more of SMYS may not deflect the pipe more than 3°. (b) A miter joint on steel pipe to be operated at a pressure that produces a hoop stress of less than 30 percent, but m
- **machine formats:** - **json:** https://regulus.evalyn.ai/document/ar-car-23-500-192-233.json
- **markdown:** https://regulus.evalyn.ai/document/ar-car-23-500-192-233.md
- **app url:** https://regulus.evalyn.ai/document/ar-car-23-500-192-233
- **source url:** https://codeofarrules.arkansas.gov/Rules/Rule?chapterID=40&levelType=part&partID=1394&subChapterID=392&titleID=23
**body:**

§ 192.233 Miter Joints (a) A miter joint on steel pipe to be operated at a pressure that produces a hoop stress of 30 percent or more of SMYS may not deflect the pipe more than 3°. (b) A miter joint on steel pipe to be operated at a pressure that produces a hoop stress of less than 30 percent, but more than 10 percent, of SMYS may not deflect the pipe more than 12 1/2° and must be a distance equal to one pipe diameter or more away from any other miter joint, as measured from the crotch of each joint. (c) A miter joint on steel pipe to be operated at a pressure that produces a hoop stress of 10 percent or less of SMYS may not deflect the pipe more than 90°.
- **truncated:** false
- **body characters:** 664