{"operation":"document","citation":"RCSA § 16-280b-A13","title":"Manufacturer's procedures and recommendations","source_type":"regulation","agency":"Connecticut Public Utilities Regulatory Authority","status":"current","official":true,"published_on":"2025-06-11","effective_on":"2025-06-11","summary":"(a) Each Operator shall follow each manufacturer's procedures and recommendations for any Pipeline component or piece of equipment it uses unless otherwise justified. The Operator's justification shall be memorialized in writing and explain why the manufacturer's procedure or recommendations are not being followed and ","machine_formats":{"json":"https://regulus.evalyn.ai/document/ct-rcsa-16-280b-a13.json","markdown":"https://regulus.evalyn.ai/document/ct-rcsa-16-280b-a13.md"},"app_url":"https://regulus.evalyn.ai/document/ct-rcsa-16-280b-a13","source_url":"https://eregulations.ct.gov/eRegsPortal/Search/getDocument?guid=%7BE04F6097-0000-CC1C-9D68-25A0BA411C82%7D","body":"(a) Each Operator shall follow each manufacturer's procedures and recommendations for any Pipeline component or piece of equipment it uses unless otherwise justified. The Operator's justification shall be memorialized in writing and explain why the manufacturer's procedure or recommendations are not being followed and shall provide an alternative Procedure. (b) The condition of all equipment used by each Operator shall conform to the equipment manufacturer's recommended tolerances for acceptable wear, where applicable. The Operator shall inspect equipment based on usage, age, condition, and manufacturer's recommendations.","truncated":false,"body_characters":629}