# Hazardous Materials: Incorporation of Certain Cargo Tank Special Permits Into Regulations

- **operation:** document
- **citation:** 76 FR 5483
- **title:** Hazardous Materials: Incorporation of Certain Cargo Tank Special Permits Into Regulations
- **source type:** rulemaking
- **agency:** Pipeline and Hazardous Materials Safety Administration
- **status:** historical
- **official:** true
- **published on:** 2011-02-01
- **effective on:** 2011-03-03
- **summary:** The Pipeline and Hazardous Materials Safety Administration is amending the Hazardous Materials Regulations by incorporating provisions contained in certain widely used or longstanding cargo tank special permits that are granted to multiple parties and have established safety records. Special permits allow a company or individual to package or ship a hazardous material in a manner that varies from the regulations provided an equivalent level of safety is maintained. The revisions are intended to provide wider access to the regulatory flexibility offered in the special permits and eliminate the need for numerous renewal requests, thereby facilitating commercial activity and reducing paperwork burdens while continuing to maintain an appropriate level of safety.
- **machine formats:** - **json:** https://regulus.evalyn.ai/document/federal-register-2011-2014.json
- **markdown:** https://regulus.evalyn.ai/document/federal-register-2011-2014.md
- **app url:** https://regulus.evalyn.ai/document/federal-register-2011-2014
- **source url:** https://www.federalregister.gov/documents/2011/02/01/2011-2014/hazardous-materials-incorporation-of-certain-cargo-tank-special-permits-into-regulations
**body:**

Federal Register, Volume 76 Issue 21 (Tuesday, February 1, 2011) [Federal Register Volume 76, Number 21 (Tuesday, February 1, 2011)] [Rules and Regulations] [Pages 5483-5494] From the Federal Register Online via the Government Publishing Office [ www.gpo.gov ] [FR Doc No: 2011-2014] ======================================================================= ----------------------------------------------------------------------- DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Parts 171 and 173 [Docket No. PHMSA-2010-0017 (HM-245)] RIN 2137-AE56 Hazardous Materials: Incorporation of Certain Cargo Tank Special Permits Into Regulations AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Final rule. ----------------------------------------------------------------------- SUMMARY: The Pipeline and Hazardous Materials Safety Administration is amending the Hazardous Materials Regulations by incorporating provisions contained in certain widely used or longstanding cargo tank special permits that are granted to multiple parties and have established safety records. Special permits allow a company or individual to package or ship a hazardous material in a manner that varies from the regulations provided an equivalent level of safety is maintained. The revisions are intended to provide wider access to the regulatory flexibility offered in the special permits and eliminate the need for numerous renewal requests, thereby facilitating commercial activity and reducing paperwork burdens while continuing to maintain an appropriate level of safety. DATES: Effective date: The effective date of this final rule is March 3, 2011. [[Page 5484]] Incorporation by reference: The incorporation by reference of certain publications listed in the rule is approved by the Director of the Federal Register as of March 3, 2011. Voluntary Compliance date: Immediate voluntary compliance with the requirements of this final rule is authorized as of February 1, 2011. FOR FURTHER INFORMATION CONTACT: Joan McIntyre or Matthew Nickels, Standards and Rulemaking Division, (202) 366-8553, Pipeline and Hazardous Materials Safety Administration (PHMSA), or John Van Steenburg, Office of Enforcement and Compliance, (202) 366-5125, Federal Motor Carrier Safety Administration (FMCSA), 1200 New Jersey Avenue, SE., Washington, DC 20590. SUPPLEMENTARY INFORMATION: Preamble Table of Contents I. Background II. List of Commenters, General Comments, and Beyond-the-Scope Comments III. Discussion of Amendments and Applicable Comments IV. Regulatory Analyses and Notices I. Background On July 21, 2010, PHMSA issued a notice of proposed rulemaking (NPRM; 75 FR 42364) proposing to incorporate into the Hazardous Materials Regulations (HMR) provisions contained in six widely used and longstanding cargo tank special permits that are granted to multiple parties and have established safety records. We discussed how this action would reduce paperwork and compliance burdens, lower cost burdens on both industry and government by removing the need to apply for and renew special permits, and facilitate commerce while maintaining a level of safety equal to or greater than that of the current HMR requirements. We proposed to incorporate the provisions of six special permits into the HMR. We did not propose to materially change the special permits, nor did we seek comments for revising the special permits. (See Beyond-the-Scope discussion under ``II. Comments to the NPRM.'') The six special permits addressed in the NPRM were: Special Permit (SP) 11209--Authorization to transport liquefied petroleum gas (LPG) in non-DOT specification cargo tank motor vehicles known as moveable fuel storage tenders that are used exclusively for agricultural purposes. SP 13113--Authorization to transport Division 6.1 liquid soil pesticide fumigants in DOT specification MC 306 and DOT 406 cargo tank motor vehicles and DOT 57 portable tanks that are used exclusively for agricultural purposes. SP 12284--Authorization to transport certain hazardous materials used for roadway striping in non-DOT specification cargo tanks. SP 13341--Authorization for private motor carriers to transport LPG in consumer storage containers filled to greater than five percent of the container's water capacity. SP 10950--Authorization to transport nurse tanks securely mounted on field trucks. SP 13554--Authorization for nurse tanks with missing or illegible ASME plates to continue to be used in anhydrous ammonia service under specified conditions. The decision to consider the incorporation of these special permits into the HMR is based on special permits issued by PHMSA under 49 CFR part 107, subpart B (Sec. Sec. 107.101 to 107.127) and the length of time these special permits have been in use with demonstrated records of safety. A special permit sets forth alternative requirements to the HMR by means that achieve a level of safety equal to or greater than that required by regulation and that are consistent with the public interest. Congress expressly authorized DOT to issue these variances in the Hazardous Materials Transportation Act of 1975. As discussed in the NPRM, the HMR generally are performance- oriented regulations that provide the regulated community with a certain amount of flexibility in meeting safety requirements. However, not every transportation situation can be anticipated and included in the regulations. Innovation is one of the strengths of our economy and the hazardous materials community is particularly strong at developing new technologies and pioneering ways of moving materials. Special permits enable the hazardous materials industry to quickly, effectively, and safely integrate new products and technologies into the production and transportation stream, thereby providing a mechanism for testing new technologies, promoting increased transportation efficiency and productivity, and ensuring global competitiveness. PHMSA conducts ongoing reviews of special permits to identify widely used and longstanding special permits with established safety records for adoption into the HMR. Adoption of special permits as rules of general applicability provides wider access to the benefits and regulatory flexibility of the provisions granted in the special permits. Factors that influence whether a special permit is a candidate for regulatory incorporation include: the safety record of the special permit; the properties of the hazardous material; the transportation operations conducted under a special permit; the potential for broad application of a special permit; suitability of provisions in the special permit for incorporation into the HMR; rulemaking activity in related areas; and agency priorities. Special permits reduce the volume and complexity of the HMR by addressing unique or infrequent transportation situations that would be difficult to accommodate in regulations intended for use by a wide range of shippers and carriers. Converting special permits into regulations reduces paperwork burdens. Although PHMSA does not issue special permits to industry associations, PHMSA may issue a special permit to members of an industry association when many of its members have a common interest in obtaining authority to perform a specific transportation activity. Special permits issued to the members of associations are potentially among the most suitable types of special permits for later adoption into the HMR. Such special permits have broad applicability, and many of them have been in effect for a number of years and have proven safety records. II. List of Commenters, General Comments, and Beyond-the-Scope Comments PHMSA received 16 comments in response to the NPRM. Some of the commenters requested that we expedite the issuance of this final rule because of impending expiration dates for certain special permits. We recognize their concerns and have made every effort to finalize this rulemaking in an expeditious manner. While the majority of the commenters supported the proposals in the NPRM, some commenters had suggestions for additional revisions and one commenter questioned the safety of certain special permits. Comments that addressed the recommendation of additional revisions are beyond the scope of this rulemaking (see Beyond-the-Scope comments following the list of commenters). The comments, as submitted to this docket, may be accessed via http://www.regulations.gov and were submitted by the following individuals, companies and associations: (1) Far West Agribusiness Association; PHMSA-2010-0017-0002. (2) Dusty Farm Co-Op; PHMSA-2010-0017-0003. (3) The Fertilizer Institute; PHMSA-2010-0017-0004. [[Page 5485]] (4) Trinity Containers, LLC; PHMSA-2010-0017-0005. (5) Lisa Anderson; PHMSA-2010-0017-0006. (6) North Central AG; PHMSA-2010-0017-0007. (7) James T. Osterhaus; PHMSA-2010-0017-0008. (8) National Propane Gas Association; PHMSA-2010-0017-0009. (9) American Trucking Associations, Inc.; PHMSA-2010-0017-0010. (10) American Welding and Tank, LLC; PHMSA-2010-0017-0011. (11) National Tank Truck Carriers, Inc.; PHMSA-2010-0017-0012. (12) Fisk Tank Carrier; PHMSA-2010-0017-0013. (13) National Fire Protection Association; PHMSA-2010-0017-0014 and 0018. (14) Agricultural Retailers Association; PHMSA-2010-0017-0015. (15) CHS Inc.; PHMSA-2010-0017-0016. (16) CHS Agri Service Center; PHMSA-2010-0017-0017. Beyond-the-Scope Comments Comments that addressed the recommendation of additional revisions to those proposed in the NPRM are beyond the scope of this rulemaking and, therefore, cannot be addressed for incorporation into the HMR in this final rule. Such revisions must first be presented in an NPRM to provide opportunity for comment from industry and the public. While we agree that certain beyond-the-scope issues merit PHMSA's consideration, we urge those commenters who submitted beyond-the-scope issues to request a change in the regulations by filing the recommendations as petitions for rulemakings in accordance with Sec. Sec. 106.95 and 106.100. Beyond-the-Scope comments to this rulemaking include the following: The National Tank Truck Carriers (NTTC) had concerns about carrier-type status and limitations to non-agricultural operations, stating that all special permits should have these limitations removed. This rulemaking addresses incorporating special permits as currently written. For SP 11209 and SP 13113, the American Trucking Association (ATA) contended that the special permits should not be limited to private motor carriers and agricultural operations, adding that PHMSA must provide evidence that for-hire carriers and non- agricultural activities are unsafe. As stated previously, this rulemaking addresses incorporating special permits as currently written. ATA is encouraged to further explain its arguments in favor of wider applicability of the provisions and submit a petition for rulemaking. For SP 11209, the National Fire Protection Association (NFPA) questioned why the special permit requires that the cargo tanks be painted white, aluminum, or other light reflecting color, because it is not a requirement in NFPA 58 for propane storage tanks. This rulemaking addresses incorporating special permits as currently written. For SP 11209, NTTC asked whether a carrier should follow the HMR requirements or the NFPA requirements in cases where the HMR adopts an NFPA requirement by citing it in the HMR regulatory text. NTTC states that in such cases, there are a number of places in NFPA pamphlets that conflict with requirements in the HMR. The commenter suggests that special permits should include a statement that cargo tanks must conform to a certain NFPA requirement unless that requirement conflicts with an HMR requirement. In its comment, NFPA provided the following example: ``NFPA requires double bulkheads between compartments on cargo tanks hauling flammable liquids while Title 49 CFR does not.'' While this may be an issue that requires further investigation, SP 11209 authorizes the transport of liquefied petroleum gases, not flammable liquids. We are unaware of conflicts between NFPA Pamphlet 58 and SP 11209 or any other incorporated by reference material, but we invite NTTC to identify any conflicts and present their issues in a petition for rulemaking. This rulemaking addresses incorporating special permits as currently written. For SP 13113, the Agricultural Retailers Association (ARA) suggested that movements of liquid pesticide fumigants in MC 306, DOT 406, and DOT 57 containers should be authorized from distribution point to retail facility. The association stated that there is no safety difference between movements from distribution point to retail facility and movements from retail facility to farm. This rulemaking addresses incorporating special permits as currently written. For SP 10950, the Far West Agribusiness Association, the Fertilizer Institute, and Dusty Farm Co-Op support the rulemaking, but recommend that we expand the current 50 air mile radius to a 100 air mile radius for consistency with the Federal Motor Carrier Safety Administration's (FMCSA) regulations. This rulemaking addresses incorporating special permits as currently written. For SP 13554, Trinity Containers requested that, for nurse tanks, a percentage of the actual material thickness or five percent be used for the head and shell minimum thickness allowance. ARA stated that when SP 13554 was originally granted, the specifications of older nurse tanks were used to determine a minimum head and body thickness for a tank to pass the thickness test. The commenter stated that, currently, nurse tanks are built with a different diameter and grade of material, which allows the tanks to be built thinner than previously built, yet still conform to the ASME Code standards. The result is that many new nurse tanks do not meet the thickness thresholds in SP 13554 due to improved engineering. American Welding and Tank LLC stated that PHMSA should take into consideration the ASME Code thickness changes throughout the years applicable to one thickness for heads and one for shells. The commenter states that the head and shell minimum thickness allowance does not consider the tank diameter or the edition of the ASME Code in effect when the tanks were manufactured. American Welding requests that we incorporate an allowable reduction material thickness based on the actual thickness of the tank. This rulemaking addresses incorporating special permits as currently written. Under its SP 13554 comments, ATA recommends that PHMSA incorporate standards that are available free of charge. No new standards were proposed to be incorporated into the HMR, nor adopted in this final rule. The free-of-charge comment is beyond the scope of this rulemaking. Fisk Tank Carrier requested that we add the provisions of a seventh special permit, SP 14980, which authorizes the one-way transportation in commerce of liquefied petroleum gas (LPG) in certain non-DOT specification storage tanks by private carrier motor vehicle. NFPA suggested that we incorporate by reference the 2011 edition of the NFPA 58 that was published in September of 2010. If not possible due to time constraints, they recommend that we adopt the 2008 edition. NTTC objected to PHMSA incorporating by reference materials that are prepared by third party private entities when the material is not made publicly available to the regulated industry. The Fertilizer Institute requested that we address a petition for rulemaking that they previously submitted and that requested PHMSA to require the testing of all nurse tanks [[Page 5486]] regardless of illegible identification plates. The petition will be addressed in a separate future rulemaking. III. Discussion of Amendments and Applicable Comments The six special permits addressed in this final rule that authorize cargo tank transportation operations not specifically permitted under the HMR were initially issued to members of industry associations or similar organizations. They have well-established safety records and therefore PHMSA has determined that they are excellent candidates for incorporation into the HMR. Incorporating these special permits into the HMR will eliminate the need for over 10,000 current grantees to reapply for the renewal of six special permits every four years and for PHMSA to process the renewal applications, thereby eliminating a significant paperwork burden both on industry and the government. A discussion of incorporating the provisions of six special permits into the HMR and their applicable comments follows below. As discussed earlier in this preamble, most of the commenters are supportive of this rulemaking. Those comments that are within the scope of this rulemaking are discussed below. The Fertilizer Institute pointed out that in the NPRM's preamble, we reversed the paragraph numbers in the preamble from the regulatory text for Sec. 173.315(m)(2) and (m)(3). The NPRM's preamble error is noted. The regulatory text was correct in the proposed regulatory text, and the preamble discussion in this final rule reflects the correction of the printing error. Lisa Anderson is opposed to incorporating some of the proposed special permits because she contends that they do not provide an equivalent level of safety as cargo tanks tested under the current requirements in Part 180 of the HMR. As discussed in the preambles of the NPRM and this final rule, we chose the six permits addressed in this rulemaking precisely because of their demonstrated safety records. Although the comment is duly noted, we do suggest that the commenter submit a petition for rulemaking. A. Moveable Fuel Storage Tenders SP 11209 authorizes the transportation of LPG in non-DOT specification cargo tank motor vehicles, commonly known as moveable fuel storage tenders, used exclusively for agricultural purposes. Moveable fuel storage tenders are used to supply LPG fuel to farmers for crop drying, crop irrigation, flame weeding, plant defoliation prior to harvest, and other agricultural operations. This special permit has been in effect since 1994 and has been utilized by over 3,400 grantees. A review of the Hazardous Materials Incident Data library did not reveal any incidents related to this special permit over the past ten years. Each vehicle operated under this special permit conforms to the ASME Code in effect at the time of its manufacture. Provisions governing the design and use of these vehicles are included in NFPA 58, Liquefied Petroleum Gas Code. Mr. James T. Osterhaus, NPGA, CHS Inc., and CHS Agri Service Center, submitted the following comments (see their full comments at http://www.regulations.gov ). James Osterhaus took issue with the following sentence from the preamble text of the NPRM: ``In addition, transportation of a moveable fuel storage tender to an LPG distribution facility for re-filling would be permitted only if it contains no more than five percent of its water capacity.'' Mr. Osterhaus is correct that this sentence could be misleading because moveable fuel storage tenders are not permitted to be ``refilled'' at any location except the point of use. However, we believe that proposed Sec. 173.5(d)(9), taken from the special permit, is clear: ``Transportation of the movable fuel storage tender between its point of use and a liquefied petroleum gas distribution facility is authorized only if the cargo tank contains no more than five percent of its water capacity.'' Mr. Osterhaus suggests that we add the following language for clarity, ``A movable fuel storage tender may only be filled at the consumer's premises or point of use. Transportation of a moveable fuel storage tender containing more than five percent of its water capacity from a liquefied distribution facility to a consumer's premises or point of use is prohibited.'' We agree that the first sentence of Mr. Osterhaus' suggestion would ensure clarity, and we have added it to Sec. 173.5(d)(9). We believe the addition of the second sentence would be redundant. The National Fire Protection Association (NFPA) recommends that we revise ``NFPA Pamphlet 58'' to read more correctly as ``NFPA 58, Liquefied Petroleum Gas Code.'' We agree and have made the correction each place it appears in this rulemaking (Sec. Sec. 173.5 and 173.315 for SP 11209 and SP 13554, respectively). NFPA also recommends that we incorporate a more current edition of this Code into the HMR (see Beyond-the-Scope comments in Section II of this preamble). Additionally, NFPA suggests that we revise the regulatory text for incorporating SP 11209 into Sec. 173.5 by removing paragraphs (d)(1), (d)(2), (d)(3) and (d)(6) because the paragraphs duplicate the requirements in NFPA 58, Liquefied Petroleum Gas Code. We disagree with NFPA. We believe that deleting these paragraphs from the HMR is unnecessary and that the inclusion of the paragraphs provides a user- friendly aspect to this section. We are, therefore, leaving the paragraphs in place. This final rule incorporates the terms of SP 11209 into the HMR as proposed in the NPRM with the exception of the addition of the following sentence to Sec. 173.5(d)(9) for clarification: ``A movable fuel storage tender may only be filled at the consumer's premises or point of use.'' PHMSA is amending Sec. 173.5 to authorize the transportation of LPG in moveable fuel storage tenders used exclusively for agricultural purposes and operated by a private motor carrier. (A ``private motor carrier,'' as defined in interpretation letters issued by PHMSA, is a carrier who transports the business's own products and does not provide such transportation service to other businesses). As proposed in the NPRM, a non-DOT specification cargo tank motor vehicle used as a moveable fuel storage tender must: (1) Have a minimum design pressure of 250 psig; (2) conform to the requirements of the ASME Code in effect at the time the cargo tank was manufactured and marked accordingly; (3) have a water capacity of 1,200 gallons or less; (4) conform to applicable requirements in NFPA 58, Liquefied Petroleum Gas Code; and (5) be mounted securely on a motor vehicle. In addition, the cargo tank must be filled as prescribed in Sec. 173.315(b). When filled, transportation of a moveable fuel storage tender would be limited to movements over local roads between fields using the shortest practical distance. In addition, transportation of a moveable storage fuel tender to a moveable fuel storage tender facility would be permitted only if it contains no more than five percent of its water capacity. B. Liquid Soil Pesticide Fumigants SP 13113 authorizes the transportation of Division 6.1 liquid soil pesticide fumigants in MC 306 and DOT 406 cargo tank motor vehicles and DOT 57 portable tanks used exclusively for agricultural purposes. Liquid soil pesticide fumigants are used by farmers as an alternative to the agricultural use of methyl bromide to ensure the adequate protection of crops from pest infestation and to preserve agricultural [[Page 5487]] productivity. Transportation of these materials is limited to private motor carriage and must be between a bulk loading facility and farms (including between farms) not exceeding 150 miles from one another. This special permit has been in effect since 2002 and has been utilized by hundreds of grantees. A review of the Hazardous Materials Incident Data library did not reveal any incidents related to this special permit since the date of its issuance. Prior to 2002, when this material was classed as Dichloropropenes, 6.1, UN2047, PG III, it was routinely shipped, in accordance with Sec. 173.242, in MC 306 and DOT 406 cargo tanks and DOT 57 portable tanks. The same tanks have been widely used to transport gasoline, a low flashpoint PG II liquid. The pressure relief systems and bottom discharge equipment on the cargo tanks offer equivalent safety in terms of containment and operation of pressure relief systems. Also, stainless steel DOT 57 portable tanks provide comparable containment to metal, rigid plastic, and composite Intermediate Bulk Containers (IBCs), which are authorized for transport of Division 6.1 liquid soil pesticide fumigants under Sec. 173.202. PHMSA is incorporating the terms of SP 13113 into the HMR by amending Sec. 173.5. MC 306 and DOT 406 cargo tank motor vehicles used for the transportation of these fumigants must: (1) meet qualification and maintenance requirements (including periodic testing and inspection) in accordance with Subpart E of Part 180; and (2) conform to the pressure relief system requirements specified in Sec. 173.243(b)(1). In addition, MC 306 cargo tank motor vehicles must be equipped with stop-valves capable of being remotely closed by manual and mechanical means; and DOT 406 cargo tanks must conform to the bottom outlet requirements specified in Sec. 173.243(b)(2). DOT 57 portable tanks used to transport Division 6.1 liquid soil pesticide fumigants must be constructed of stainless steel. C. Non-DOT Specification Cargo Tanks Used for Roadway Striping SP 12284 authorizes the transportation in commerce of certain hazardous materials used for roadway striping in non-DOT specification cargo tanks. These non-DOT specification cargo tanks are used for the low hazard job of applying roadway striping to paved roads throughout the United States. This special permit has been in effect since 1999 and has been utilized by over 100 grantees. A review of the Hazardous Materials Incident Data library did not reveal any incidents related to this special permit since the date of its issuance. Based on this safety record, PHMSA is incorporating the provisions of SP 12284 into the HMR by adding a new paragraph (c) to Sec. 173.5a to authorize the transportation of certain hazardous materials used for roadway striping in non-DOT specification cargo tanks provided the conditions specified in the new paragraph are met. The new paragraph (c) specifies conditions that include packaging specifications, inspection and testing requirements, requirements for maintaining records, and operational controls. Consistent with the special permit, paragraph (c) includes certain/special marking requirements that are in addition to the applicable marking and placarding requirements in subparts D and F. The section title heading is also revised to reflect the addition of non-DOT specification cargo tanks used for roadway striping into this section. Finally, Sec. 173.242(b) is revised to include the authorization to use non-DOT specification cargo tanks used for roadway striping. D. LPG Storage Containers SP 13341 authorizes the transportation by private motor carrier of LPG in consumer storage containers in quantities greater than five percent of the container's water capacity. The storage containers designated in the special permit are designed for permanent installation on consumer premises. The special permit authorizes one- way transportation only, from the consumer location to the container owner's nearest LPG plant. This special permit has been in effect since 2004 and has been utilized by several thousand grantees. A review of the Hazardous Materials Incident Data library did not reveal any incidents related to this special permit since the date of its issuance. Prior to 1998, consumer storage containers filled with LPG to greater than five percent water capacity were routinely transported without any known incidents. The prohibition of transporting containers filled to more than five percent water capacity resulted from concern of the potential for confusion between ASME and DOT tanks, as ASME tanks are not designed to be lifted by the lugs with product inside. This final rule requires lifting with slings, not by the lugs. Also, transporting a tank with some product is sometimes preferable from a safety standpoint than removing LPG from a tank at a residence. NPGA, CHS Inc., and CHS Agri Service Center offered additional safety and efficiency information concerning this special permit in their comments (see their comments at http://www.regulations.gov ). PHMSA is incorporating the terms of SP 13341 into the HMR by revising Sec. 173.315(j) to authorize the transportation of LPG in consumer storage containers in quantities greater than five percent of the container's water capacity. The storage container must have a water capacity not exceeding 500 gallons and be ASME ``U'' stamped to indicate that it was designed and constructed in accordance with ASME Code requirements. In addition, the container must be inspected for leaks, corroded or abraded areas, dents, weld distortions, or any other conditions that could make the container unsafe for transportation. PHMSA is also requiring that: (1) Only one storage container be transported at one time on a motor vehicle; (2) the storage container be lifted by slings, not by lifting lugs; and (3) the storage container be loaded and secured on the motor vehicle so that the container is well-secured against movement and completely within the envelope of the vehicle. Finally, transportation is limited to one-way movement from the consumer's premises to the container owner's nearest facility. E. Nurse Tanks Nurse tanks are non-DOT specification cargo tanks used to transport and apply anhydrous ammonia fertilizers. The HMR authorize the use of nurse tanks operated by private motor carriers exclusively for agricultural purposes provided that the nurse tank: (1) Has a minimum design pressure of 250 psig and meets the requirements of Section VIII of the ASME code in effect at the time the nurse tank was manufactured; (2) is equipped with pressure relief valves; (3) has a capacity of 3,000 gallons or less; (4) is loaded to a filling density no greater than 56 percent; and (5) is securely mounted on a farm wagon. Because they are non-DOT specification containers, nurse tanks that are not operating under a special permit are not subject to periodic inspection, testing, or requalification requirements. Nurse tanks mounted on field trucks. SP 10950 authorizes the use of a nurse tank securely mounted on a field truck. Field trucks are specifically designed and equipped to improve safety and efficiency by being more maneuverable and more stable than a farm wagon when moving over hilly terrain. A definition for field trucks is specified in Sec. 173.315 as new paragraph (m)(3)(iv). These trucks are operated in remote [[Page 5488]] rural areas in eastern Washington, Oregon, and northern Idaho within a short distance of the fertilizer distribution point. The special permit has been in effect since 1993 and has been utilized by over one hundred grantees. A review of the Hazardous Materials Incident Data library did not reveal any incidents related to this special permit since the date of its issuance. Tanks operated under this special permit are subject to the periodic testing requirements under Subpart E of Part 180. The American Trucking Associations (ATA) supports the incorporation of the provisions in SP 10950 into the HMR. However, the organization requests that registration be a requirement, stating that PHMSA would lose the ability to track transporters of anhydrous ammonia and other hazardous materials without such a requirement, thereby losing its ability to quantify safety performance, collect data, initiate investigations and pursue enforcement actions. We believe ATA misread SP 10590 as excepting the permit holder from registration requirements. This is not the case. The special permit specifically states in Item 11, third bullet, that the permit holders must comply with the registration requirements. For SP 10950 provisions, ATA also requested that we incorporate an exception from the security plan requirements ``similar to the exemption afforded to users of anhydrous ammonia nurse tanks.'' If ATA is referring to SP 13554, Item 11, second bullet, that provision specifically requires conformance to the security plan requirements. Users of SP 13554 were not excepted from security requirements, and as stated earlier in this preamble, we are not deviating from the current special permit provisions in this rulemaking. Therefore, the security plan requirements in Subpart I of Part 172 will remain applicable to nurse tanks mounted on field trucks. PHMSA is incorporating the provisions of SP 10950 into the HMR by adding a new paragraph (m)(3) to Sec. 173.315. Nurse tanks with missing or illegible ASME plates. As indicated above, nurse tanks must be manufactured in accordance with the applicable ASME Code requirements in effect at the time of manufacture. The ASME Code requires tanks built to its specifications to have an attached plate that lists the manufacturer, maximum allowable working pressure, minimum design metal temperature, and the year of manufacture. A number of nurse tanks are missing the required ASME plates or have illegible ASME plates. SP 13554 permits the continued use in anhydrous ammonia service of nurse tanks with missing or illegible ASME plates provided the tanks are inspected and tested. Specifically, the tanks must undergo an external visual inspection and testing using the procedures specified in Sec. 180.407(d), a thickness test using the procedures specified in Sec. 180.407(i), and a pressure test using the procedures specified in Sec. 180.407(g). The special permit also establishes minimum head and shell thickness, and nurse tanks not meeting those levels must be removed from service. Nurse tanks that pass the above-described tests must be marked with a unique owner's identification number and must pass the same tests at least every five years to remain in service. We received a comment from ATA under SP 13554 which stated concern ``over PHMSA's incorporation of industry consensus standards into the HMR where such standards are developed without the benefit of formal rulemaking and where such standards are not provided to the public free of charge. This pay-to-play system of developing regulatory standards raises questions under the Administrative Procedures Act (5 U.S.C. 500 et seq.), which requires agencies to provide interested persons with notice and an opportunity to participate in the rulemaking process.'' The commenter continued, ``To cure this defect, PHMSA should first publish the industry standard in the Federal Register and solicit comments on it prior to its incorporation in the HMR.'' PHMSA is not adopting any new standards in this final rule, as the Section VIII of the ASME Code was previously incorporated by reference into the HMR. This special permit has been in effect since 2004 and has been utilized by thousands of grantees. A review of the Hazardous Materials Incident Data library did not reveal any incidents related to this special permit since the date of its issuance. Although 49 CFR 173.315(m) requires that a nurse tank ``meet the requirements of the edition of Section VIII of the ASME Code in effect at the time it was manufactured and is marked accordingly,'' if the plate is missing or illegible the nurse tank cannot be used. Therefore, these additional requirements that nurse tanks operating under the special permit must follow (i.e., the thickness testing, the pressure testing, and the external visual inspection), provide information about condition of the tank to ensure for the safe continued use of these tanks. In this final rule, PHMSA is incorporating the terms of SP 13554 into the HMR by adding a new paragraph (m)(2) in Sec. 173.315. Existing nurse tanks with missing or illegible ASME plates that successfully pass the required inspections and tests and are marked with a unique identifier are authorized to remain in service. In Summary Based on the above discussion, this final rule amends the HMR by incorporating the provisions contained in six widely used and longstanding cargo tank special permits that, in summary, will provide the following: Authorization to transport liquefied petroleum gas (LPG) in non-DOT specification cargo tank motor vehicles known as moveable fuel storage tenders that are used exclusively for agricultural purposes (SP 11209). Authorization to transport Division 6.1 liquid soil pesticide fumigants in DOT Specification MC 306 and DOT 406 cargo tank motor vehicles and DOT 57 portable tanks, used exclusively for agricultural purposes (SP 13113). Authorization to transport certain hazardous materials used for roadway striping in non-DOT specification cargo tanks (SP 12884). Authorization for private motor carriers to transport LPG in consumer storage containers in quantities greater than five percent of the container's water capacity (SP 13341). Authorization to transport nurse tanks securely mounted on field trucks (SP 10950). Authorization for nurse tanks with missing or illegible ASME plates to continue to be used in anhydrous ammonia service under specified conditions (SP 13554). Additionally, in Sec. 171.7, we are revising the entry, American Society of Mechanical Engineers (ASME) and the National Fire Protection Association (NFPA) to reflect the addition of the incorporated by reference materials to the applicable adopted regulatory text. In Sec. 173.23, we are redesignating current paragraph (h) as new paragraph (i) and adding a provision to new paragraph (h) that authorizes packagings permanently marked with a special permit number for which the provisions of the special permit were incorporated into the HMR to continue to be used for the life of the packagings without removing or obliterating the special permit markings. This provision will serve to avoid imposing the burden of requiring the removal from service of such packagings while the markings are removed or obliterated. Finally, in Sec. 173.242, we are revising paragraph (b) to reflect the authorization of non-DOT specification cargo tanks used for roadway striping. [[Page 5489]] IV. Rulemaking Analyses and Notices A. Statutory/Legal Authority for This Rulemaking This final rule is published under the authority of 49 U.S.C. 5103(b), which authorizes the Secretary to prescribe regulations for the safe transportation, including security, of hazardous material in intrastate, interstate, and foreign commerce. 49 U.S.C. 5117(a) authorizes the Secretary of Transportation to issue special permits, which exempt a person transporting a hazardous material, or a person causing a hazardous material to be transported, from a regulation promulgated under 49 U.S.C. 5103(b), 5104, 5110, or 5112 of the Federal Hazardous Materials Transportation Law. The conditions or ``safety control measures'' of each special permit must ensure that the action performed pursuant to the special permit achieves a safety level at least equal to the safety level required under the law, or consistent with the public interest, if a required safety level does not exist. This final rule will amend the regulations by incorporating provisions from certain widely used and longstanding special permits that have established a history of safety. B. Executive Order 12866 and DOT Regulatory Policies and Procedures This final rule is not considered a significant regulatory action under section 3(f) and was therefore not reviewed by the Office of Management and Budget (OMB). The rulemaking is not considered a significant rule under the Regulatory Policies and Procedures order issued by the Department of Transportation (44 FR 11034). In this final rule, PHMSA is amending the HMR by incorporating alternatives this agency has permitted under widely used and longstanding special permits with established safety records that we have determined meet the safety criteria for inclusion in the HMR. Incorporation of these special permits into regulations of general applicability will provide shippers and carriers with additional flexibility to comply with established safety requirements, thereby reducing transportation costs and increasing p
- **truncated:** true
- **body characters:** 73992