# Harmonization With the United Nations Recommendations, International Maritime Dangerous Goods Code, and International Civil Aviation Organization's Technical Instructions

- **operation:** document
- **citation:** 64 FR 10742
- **title:** Harmonization With the United Nations Recommendations, International Maritime Dangerous Goods Code, and International Civil Aviation Organization's Technical Instructions
- **source type:** rulemaking
- **agency:** Research and Special Programs Administration
- **status:** historical
- **official:** true
- **published on:** 1999-03-05
- **effective on:** Not available
- **summary:** This final rule consolidates Docket HM-215C and HM-217 (``Labeling Requirements for Poisonous Materials''). RSPA is amending the Hazardous Materials Regulations (HMR) to maintain alignment with international standards by incorporating numerous changes to proper shipping names, hazard classes, packing groups, special provisions, packaging authorizations, air transport quantity limitations and vessel stowage requirements. In addition, RSPA is making other amendments to the HMR, including eliminating the ``Keep Away From Food'' label for poisonous materials in Division 6.1, Packing Group III. Because of recent changes to the International Maritime Dangerous Goods Code (IMDG Code), the International Civil Aviation Organization's Technical Instructions for the Safe Transport of Dangerous Goods by Air (ICAO Technical Instructions), and the United Nations Recommendations on the Transport of Dangerous Goods (UN Recommendations), these revisions are necessary to facilitate the transport of hazardous materials in international commerce.
- **machine formats:** - **json:** https://regulus.evalyn.ai/document/federal-register-99-4517.json
- **markdown:** https://regulus.evalyn.ai/document/federal-register-99-4517.md
- **app url:** https://regulus.evalyn.ai/document/federal-register-99-4517
- **source url:** https://www.federalregister.gov/documents/1999/03/05/99-4517/harmonization-with-the-united-nations-recommendations-international-maritime-dangerous-goods-code
**body:**

Federal Register, Volume 64 Issue 43 (Friday, March 5, 1999) [Federal Register Volume 64, Number 43 (Friday, March 5, 1999)] [Rules and Regulations] [Pages 10742-10783] From the Federal Register Online via the Government Publishing Office [ www.gpo.gov ] [FR Doc No: 99-4517] [[Page 10741]] _______________________________________________________________________ Part II Department of Transportation _______________________________________________________________________ Research and Special Programs Administration _______________________________________________________________________ 49 CFR Part 171, et al. Harmonization With the United Nations Recommendations, International Maritime Dangerous Goods Code, and International Civil Aviation Organization's Technical Instructions; Final Rule Federal Register / Vol. 64, No. 43 / Friday, March 5, 1999 / Rules and Regulations [[Page 10742]] DEPARTMENT OF TRANSPORTATION Research and Special Programs Administration 49 CFR Parts 171, 172, 173, 174, 175, 176, 177, 178 and 180 [Docket No. RSPA-98-4185 (HM-215C)] RIN 2137-AD15 Harmonization With the United Nations Recommendations, International Maritime Dangerous Goods Code, and International Civil Aviation Organization's Technical Instructions AGENCY: Research and Special Programs Administration (RSPA), DOT. ACTION: Final rule. ----------------------------------------------------------------------- SUMMARY: This final rule consolidates Docket HM-215C and HM-217 (``Labeling Requirements for Poisonous Materials''). RSPA is amending the Hazardous Materials Regulations (HMR) to maintain alignment with international standards by incorporating numerous changes to proper shipping names, hazard classes, packing groups, special provisions, packaging authorizations, air transport quantity limitations and vessel stowage requirements. In addition, RSPA is making other amendments to the HMR, including eliminating the ``Keep Away From Food'' label for poisonous materials in Division 6.1, Packing Group III. Because of recent changes to the International Maritime Dangerous Goods Code (IMDG Code), the International Civil Aviation Organization's Technical Instructions for the Safe Transport of Dangerous Goods by Air (ICAO Technical Instructions), and the United Nations Recommendations on the Transport of Dangerous Goods (UN Recommendations), these revisions are necessary to facilitate the transport of hazardous materials in international commerce. DATES: Effective Date: October 1, 1999. Voluntary Compliance Date: RSPA is authorizing immediate voluntary compliance, with the exception of the provisions contained in Sec. 173.301(i). Persons voluntarily complying with these regulations should be aware that petitions for reconsideration may be received and, as a result of RSPA's evaluation of those petitions, the amendments adopted in this final rule could be subject to further revision. Delayed Compliance Date: Unless otherwise specified, compliance with the amendments adopted in this final rule is required beginning on October 1, 2000. Incorporation by Reference Date: The incorporation by reference of publications listed in this final rule has been approved by the Director of the Federal Register as of October 1, 1999. FOR FURTHER INFORMATION CONTACT: Bob Richard, Assistant International Standards Coordinator, telephone (202) 366-0656, or Joan McIntyre, Office of Hazardous Materials Standards, telephone (202) 366-8553, Research and Special Programs Administration, U.S. Department of Transportation, 400 Seventh Street, S.W., Washington, D.C. 20590-0001. SUPPLEMENTARY INFORMATION: I. Introduction This final rule consolidates two rulemakings; Docket HM-215C, ``Harmonization with the UN Recommendations, IMDG Code and ICAO Technical Instructions'' and the previous Docket HM-217, ``Labeling Requirements for Poisonous Materials.'' By publication of Docket HM- 215C notice of proposed rulemaking (NPRM) [63 FR 44312], Docket HM-217 was terminated as a separate rulemaking action. II. Background On December 21, 1990, RSPA published a final rule [Docket HM-181; 55 FR 52402] which comprehensively revised the Hazardous Materials Regulations (HMR), 49 CFR Parts 171 to 180, with respect to hazard communication, classification, and packaging requirements, based on the UN Recommendations. One intended effect of the rule was to facilitate the international transportation of hazardous materials by ensuring a basic consistency between the HMR and international regulations. The UN Recommendations are not regulations, but are recommendations issued by the UN Committee of Experts on the Transport of Dangerous Goods. These recommendations are amended and updated biennially by the UN Committee of Experts and are distributed to nations throughout the world. They serve as the basis for national, regional, and international modal regulations (specifically the IMDG Code, issued by the International Maritime Organization (IMO), and the ICAO Technical Instructions, issued by the ICAO Dangerous Goods Panel). In 49 CFR 171.12, the HMR authorize hazardous materials shipments prepared in accordance with the IMDG Code if all or part of the transportation is by vessel, subject to certain conditions and limitations. Offering, accepting and transporting hazardous materials by aircraft, in compliance with the ICAO Technical Instructions, and by motor vehicle either before or after being transported by aircraft, are authorized in Sec. 171.11 (subject to certain conditions and limitations). On December 29, 1994, RSPA published a final rule [Docket HM-215A; 59 FR 67390] amending the HMR by incorporating changes to more fully align the HMR with the seventh and eighth revised editions of the UN Recommendations, Amendment 27 to the IMDG Code and the 1995-96 ICAO Technical Instructions. The final rule provided consistency with international air and sea transportation requirements which became effective January 1, 1995. On May 6, 1997, RSPA published a final rule [Docket HM-215B; 62 FR 24690] amending the HMR by incorporating changes to more fully align the HMR with the ninth revised edition of the UN Recommendations, Amendment 28 to the IMDG Code and the 1997-1998 ICAO Technical Instructions. The final rule provided consistency with international air and sea transportation requirements which became effective January 1, 1997. In a final rule published October 29, 1998 (Docket HM-215C; 63 FR 57929), RSPA incorporated by reference the latest editions of the ICAO Technical Instructions and the IMDG Code into the HMR. This action ensured that international shippers could begin complying with changes to international air and vessel standards, which become effective on January 1, 1999, in the event that this final rule was not published by that date. In addition, the October 29, 1998 final rule amended a shipping paper requirement for the use of the ICAO Technical Instructions. This final rule amends the HMR based on the tenth revised edition of the UN Recommendations, the 1999-2000 ICAO Technical Instructions, and Amendment 29 to the IMDG Code with the intent to more fully align the HMR with international air and sea transport requirements which became effective January 1, 1999. Petitions for rulemaking pertinent to harmonization with international standards and the facilitation of international transportation were also considered and are the basis of certain changes incorporated in this final rule. Other changes are based on feedback from the regulated industry and RSPA initiatives. III. Summary and Overview On August 18, 1998, RSPA published an NPRM (Docket HM-215C; 63 FR 44312) to continue its efforts to facilitate the transport of hazardous materials in international commerce. RSPA received [[Page 10743]] approximately 30 comments in response to the NPRM. These comments were submitted by industry associations representing chemical manufacturers and distributors and packaging manufacturers and reconditioners. Comments were also submitted from a gas strut manufacturer, a battery manufacturer, a chemical manufacturer, a paint manufacturer and distributor, and Transport Canada. Commenters expressed support of RSPA's effort to align the HMR with international standards to provide consistency and facilitate the international transportation of hazardous materials. The majority of commenters supported various proposals, but some commenters raised concerns and recommended alternative amendments to certain proposals which are discussed in Section IV of this final rule. Some commenters suggested amendments which are beyond the scope of this final rule and must first be subject to an NPRM to provide adequate opportunity for notice and comments. These issues may be addressed in separate rulemakings. Amendments to the HMR contained in this final rule include: --Addition of a new approval provision to allow use of recycled plastics material for the manufacturing of plastic drums and jerricans. --Amendments to the Hazardous Materials Table (HMT) which add, revise or remove certain proper shipping names, hazard classes, packing groups, special provisions, including portable tank requirements, packaging authorizations, bulk packaging requirements, and passenger and cargo aircraft maximum quantity limitations. --Amendments to the List of Marine Pollutants which remove, revise and add certain entries. --Amendments to remove, revise and add certain special provisions, including one new special provision to deregulate cotton under specific conditions. --Amendment of the n.o.s. and generic proper shipping names which are required to be supplemented with technical names in association with the basic description. --Incorporation of provisions authorizing the reconditioning of packagings other than metal drums. --Incorporation of four new shipping descriptions to more clearly describe internal combustion engines and vehicles powered by flammable liquid and flammable gas fuels. --Elimination of the KEEP AWAY FROM FOOD label for poisonous materials in Division 6.1, Packing Group III. Requiring the use of a POISON or TOXIC label on packagings containing materials meeting the toxicity criteria for poisonous materials in Division 6.1, Packing Group III. Allowing optional text on, or adjacent to, the POISON or TOXIC label to read ``PG III.'' --Addition of reciprocity provisions for Canadian cylinders. --Amendment of continuing requalification requirements for portable tanks and intermediate bulk containers (IBCs) which are intended for the transport of a single material. --Addition of requirements for limited quantity packagings containing fragile inner packagings. --Incorporation of an exception for certain shock absorbers, struts, gas springs and shocks and other automobile energy absorbing articles. --Amendment of IBC repair, qualification and maintenance requirements. IV. Section-by-Section Summary of Regulatory Changes Part 171 Section 171.2. RSPA is amending paragraph (d)(1) by adding the letters ``CTC'' to the list of specification indications which may not be misrepresented according to Sec. 171.2(c). This is necessary as a result of a new provision in Sec. 173.301(i) authorizing the use of CTC specification cylinders under certain conditions. Section 171.7. RSPA is updating the incorporation by reference for four American Society of Mechanical Engineers (ASTM) standards, one American Pyrotechnics Association (APA) standard, one Department of Defense (DOD) standard, and the UN Recommendations. The ICAO Technical Instructions were updated to the 1999-2000 edition and the IMDG Code was updated to Amendment 29, in a final rule, published October 29, 1998 [Docket HM-215C; 63 FR 44312] and effective January 1, 1999. One new incorporation by reference is added under the International Organization for Standardization (ISO). ``ASTM D 3278--95 Standard Test Methods for Flash Point of Liquids by Small Scale (Setaflash) Closed-Cup Apparatus'' is updated to the 1996 edition. ``ASTM D 56-93 Standard Test Method for Flash Point by Tag Closed Tester,'' ``ASTM D 93-94 Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester'' and ``ASTM D 3828-93 Standard Test Method for Flash Point by Small Scale Closed Tester'' are updated to the 1997 editions. These updates reflect the latest revisions to these standards which are used for the classification of Class 3 flammable liquids in Secs. 173.120 and 173.121. ``APA Standard 87-1, Standard for Construction and Approval for Transportation of Fireworks, Novelties, and Theatrical Pyrotechnics'' is updated to the January 23, 1998 version which brings the standards up to date with current industry practices. ``DOD TB 700-2; NAVSEAINST 8020.8; AFTO 11A-1-47; DLAR 8220.1: Explosives Hazard Classification Procedure'' is updated to the January 1998 edition. References to the UN Recommendations are updated to the tenth revised edition and an incorrect reference to Sec. 172.519 is removed in the second column. RSPA reviewed the updated standards and concluded that no major technical amendments have been incorporated into these standards. Finally, consistent with the addition of a new special provision for the entry ``Cotton,'' NA1365, ``ISO 8115, Cotton Bales--Dimensions and Density, 1986 Edition'' is added to the table of material incorporated by reference. (See the amendments to the Hazardous Materials Table.) Section 171.8. The text for the ``N.O.S.'' definition is revised to reflect the changes in this final rule regarding the addition of a new symbol to specify the n.o.s. and generic proper shipping names which are required to be supplemented with a technical name. (See the preamble discussion under Secs. 172.101(b) and 172.203(k)(3)). Sections 171.11, 171.12 and 171.12a. Paragraphs (d)(14), (b)(17) and (b)(16) of Secs. 171.11, 171.12 and 171.12a, respectively, are revised for consistency with Sec. 173.306(a)(1) which provides certain exceptions for limited quantities of compressed gases in containers of not more than four fluid ounces. Section 171.12a. The amendments proposed to this section in the NPRM providing for reciprocity for certain Canadian specification cylinders to be transported within the U.S. will be incorporated into Sec. 173.301(i). See preamble discussion under Sec. 173.301. Section 171.14. Paragraph (d) is revised to provide a delayed implementation date for amendments adopted in this final rule. The effective date of the final rule is October 1, 1999. However, RSPA is authorizing an immediate voluntary compliance date to allow shippers to prepare their shipments in accordance with the new ICAO, IMDG Code and HMR provisions. RSPA is also authorizing a delayed mandatory compliance date with the new requirements until October 1, 2000. This delay offers a sufficient phase-in [[Page 10744]] period to implement new provisions and deplete current stocks of shipping papers, labels, placards and packagings affected by the new requirements. In addition, paragraph (d)(2) permits intermixing of old and new hazard communication requirements until October 1, 2000. As stated in the NPRM, based on its own initiative and comments provided in petitions, RSPA is extending a delayed implementation period for use of the POISON label for Division 6.1, Packing Group III materials and allowing continued use of the KEEP AWAY FROM FOOD label until October 1, 2003. Part 172 Section 172.101. RSPA received favorable comments for including the addition of a new symbol to Sec. 172.101(b) and the Hazardous Materials Table (HMT) to denote the n.o.s. and generic proper shipping names which are required to be supplemented with the technical name of the hazardous material (in parentheses and in association with the basic description). In the NPRM, RSPA proposed using the asterisk (*) as the new symbol. It has since been brought to RSPA's attention that the asterisk symbol poses a problem for computer searches. Therefore, in this final rule, RSPA is replacing the asterisk symbol with the letter ``G'' to identify n.o.s. and generic proper shipping names which must meet the technical name requirement. Previously, these proper shipping names were listed in Sec. 172.203(k)(3). The change is adopted in this final rule to simplify and improve the use of the HMR. As a result of the change, Sec. 172.203(k)(3) is removed. In addition, approximately 19 new proper shipping names are added to be required to be supplemented with a technical name. The technical name requirement for these entries are consistent with the UN Recommendations. As discussed in the NPRM, certain proper shipping names are currently required to be supplemented with a technical name in the UN Recommendations. However, in the opinion of RSPA, these entries do not warrant a supplemental technical name. The majority of these are pesticides with proper shipping names which RSPA believes are sufficiently descriptive. RSPA believes that requiring these proper shipping names to be supplemented with technical names adds minimal value for emergency response purposes while introducing an unwarranted burden on the shipper. On this basis, RSPA is not adopting the technical name requirement for these proper shipping names. Readers should be aware that certain n.o.s. and generic proper shipping names may be required to be supplemented with technical names when being transported internationally. In addition, based on its own initiative, RSPA is adding or removing certain proper shipping names concerning the technical name requirement for consistency with the tenth revised edition of the UN Recommendations. (See preamble discussion under Sec. 172.203.) A commenter stated that the plus (+) sign is not an appropriate symbol to denote materials classified on the basis of human experience because it is used for other purposes in the HMR. RSPA does not agree with the commenter that the plus sign is an inappropriate symbol and points out that the plus sign is presently used in the HMR to indicate materials classified on the basis of human experience. In the NPRM, RSPA proposed to add the plus sign to additional materials which are classified on the basis of human experience consistent with the UN Recommendations. RSPA is not convinced that there would be any benefit in using a different symbol. Another commenter expressed concern that the proposal to add a plus sign to Column (1) of the HMT for epichlorohydrin on the basis of human experience would cause his company economic hardship. The commenter stated that, if adopted, the classification would be fixed for every mixture or solution containing epichlorohydrin, including very dilute solutions of epichlorohydrin in water even if the mixtures or solutions do not meet the criteria for hazard classification in the HMR. In response to this comment, RSPA notes that a mixture or solution containing epichlorohydrin where the hazard is significantly different from that of the pure material should be evaluated on the basis of classification criteria. If such a mixture or solution does not meet the corresponding hazard class, a different proper shipping name may be used. Therefore, RSPA is adopting, as proposed, the plus sign for epichlorohydrin and other materials identified in the NPRM. The Hazardous Materials Table (HMT). Amendments to the HMT for the purpose of harmonizing with the tenth revised edition of the UN Recommendations include the following: The plus (+) sign is added to Column 1 to fix the proper shipping name, hazard class and packing group for the entries, ``Aminophenols (o-;m-;p-),'' ``Chlorodinitrobenzenes,'' ``Dichloroanilines, liquid,'' ``Dichloroanilines, solid,'' ``o-Dichlorobenzene,'' ``N,N- Diethylaniline,'' ``Epichlorohydrin,'' ``Nitroanilines (o-;m-;p-;),'' ``Nitroanisole,'' ``Nitrobenzene,'' ``Nitrophenols (o-;m-;p-;),'' ``Phenetidines,'' ``Phenylenediamines (o-;m-;p-;),'' ``Toluene diisocyanate,'' ``Toluidines, liquid'' and ``Toluidines, solid.'' This action aligns the HMR with the UN Recommendations which use Special Provision 279 to indicate materials which are classified on the basis of human experience. Various other changes to the HMT include the following: A number of hazardous materials proper shipping names are revised, including the deletion of the word ``commercial'' from the entries, ``Charges, shaped, commercial, without detonator,'' (UN 0059, 0439, 0440 and 0441), the revision of the entry ``Amyl alcohols'' to ``Pentanols'' and the revision of the entry ``Dithiocarbamate pesticides, liquid, toxic'' to ``Thiocarbamate pesticide, liquid, toxic.'' For entries such as ``Aluminum alkyls'' and ``Sodium nitrite,'' the subsidiary risks are revised. A typographical error in the NPRM's regulatory text for the entry ``Sodium nitrite'' resulted in omitting the primary hazard and is corrected in this final rule. The entries, ``Aviation regulated liquid, n.o.s.'' and ``Aviation regulated solid, n.o.s.'' are added for alignment with the ICAO Technical Instructions and the UN Recommendations. The entry ``Wheel chair, electric'' is removed as a proper shipping name and an italicized entry is added to refer users of the HMR to the proper shipping name ``Battery-powered vehicle or Battery-powered equipment.'' RSPA received a comment requesting a revision to Sec. 175.10(a)(20)(iv)(C) which requires the packaging to be marked ``Battery, wet, with wheelchair'' and which the commenter referred to as a proper shipping name. The commenter stated that the proper shipping name is not in the HMT. RSPA points out that in Sec. 175.10(a)(20)(iv)(C), ``Battery, wet, with wheelchair'' is a marking and not a proper shipping name. On this basis, RSPA has made no changes to Sec. 175.10(a)(20)(iv)(C). For materials such as ``Chlorosilanes, corrosive, n.o.s,'' Column 7 is revised to reflect the alignment of the portable tank assignments with those in the UN Recommendations. In the NPRM, RSPA proposed to revise the Column (7) special provisions relating to portable tanks, for the entry, ``Corrosive liquids, toxic, n.o.s.,'' UN2922, for Packing Groups I and II. A [[Page 10745]] commenter pointed out that the revisions are not consistent with the UN Recommendations. RSPA agrees with the commenter and is not adopting the proposed revisions. For the entry, ``Plastic molding compounds in dough, sheet or extruded rope form evolving flammable vapor,'' to correct an error, the non-bulk packaging authorization reference is revised to read ``221.'' In addition, Sec. 173.221 is amended to authorize bulk packagings. The packaging authorization for the entry, ``Polymeric beads, expandable, evolving flammable vapor'' is revised to read ``221.'' (See additional preamble discussion under Sec. 173.221.) For the entries, ``Batteries, wet, filled with acid, electric storage'' and ``Batteries, wet, filled with alkali, electric storage'' RSPA is increasing the passenger aircraft quantity limitation from 25 kg gross mass to 30 kg gross mass. This change is consistent with the amendments to the 1999-2000 edition of the ICAO Technical Instructions. In response to a petition for rulemaking (P-1316), RSPA proposed that baled cotton not meeting the criteria of any hazard class would be excepted from the requirements of the HMR under certain conditions. In this final rule, RSPA is adding a new special provision for NA1365, ``Cotton'' (dry), to exclude it from the HMR when it is baled in accordance with ISO 8115, ``Cotton Bales--Dimensions and Density'' to a density of at least 360 kg/m \3\ (22.4lb/ft \3\) and it is transported in a freight container or closed transport vehicle. This action is consistent with a decision taken by the IMO and a subsequent competent authority approval issued by RSPA. As proposed in the NPRM, based on its own initiative, RSPA is adding a new entry, ``Dangerous goods in machinery or Dangerous goods in apparatus'' to the HMT. The proper shipping name is assigned identification number, NA8001, and Special Provision 136 is added for directions on class assignment. As stated in the NPRM, this entry was adopted in the ICAO Technical Instructions to provide an exception from the UN packaging performance tests for equipment, machinery or apparatus containing small quantities of hazardous materials. RSPA believes this entry is useful for transport by all modes of transportation and provides a more practical means of describing machinery or apparatus, containing small quantities of hazardous materials, when the machinery or apparatus is not specifically listed in the HMT. A commenter suggested that the proper shipping name be given a Class 9 assignment. RSPA agrees with the commenter. RSPA proposed to the UN Committee of Experts that a UN number and proper shipping name be provided and that Class 9 be assigned. Following the Committee's response, RSPA will address this issue in a future rulemaking. A commenter requested that RSPA not adopt the proposed change for the entry, ``Chloropicrin.'' In the NPRM, RSPA proposed to change the non-bulk packaging authorization cite in Column (8B) from Sec. 173.227 to Sec. 173.193. The proposed change was in error and RSPA is not adopting this change. Concerning the new entry, ``Nitroglycerin mixture, desensitized, liquid, flammable, n.o.s.,'' UN3343, RSPA received a comment questioning the impact that the new entry would have on existing competent authority approvals. These competent authority approvals provide for these materials to be described as ``Flammable liquids, n.o.s.,'' UN1993. The commenter asked RSPA to consider ``grandfathering the existing approvals in the final rule.'' It is RSPA's position that to reflect the new shipping description, these approvals can be updated upon a request from the approval holders. RSPA believes that the transition periods adopted in this final rule will provide sufficient time for processing updated approvals in order to avoid any potential inconvenience on the part of approval holders. The Vessel Operators Hazardous Materials Association (VOHMA) requested that RSPA consider including the alpha-numeric special provisions corresponding to the codes in Sec. 176.84 for materials identifed as requiring stowage ``away from'' foodstuffs or ``separated from'' foodstuffs. VOHMA stated that this action would provide consistent identification of the materials for proper stowage and segregation when being transported by vessel. RSPA believes VOHMA's request has merit and will consider it in a future NPRM to afford the public the opportunity to provide comments. Readers should be aware that for certain entries in the HMT, such as those with revised proper shipping names, the change may appear as a removal and addition. Readers should review all changes appearing in the Sec. 172.101 HMT for a complete view of the changes. Appendix B to Sec. 172.101. A number of materials are added, removed or amended in the HMR's List of Marine Pollutants. The amendments are consistent with the marine pollutants identified in Amendment 29 to the IMDG Code. One entry, ``Nitrates, inorganic, n.o.s.,'' which was mistakenly referred to in the NPRM's preamble as being proposed for removal, was actually removed from the marine pollutant list in an earlier final rule published under Docket HM-215B (May 6, 1997; 62 FR 24743). Section 172.102. Eleven new special provisions are added and one is removed for consistency with the tenth revised edition of the UN Recommendations; three obsolete special provisions are removed; and two are editorially revised as follows: Special Provision 43 is amended by adding an exception for certain nitrocellulose membrane filters. The exception is consistent with the 1999-2000 edition of the ICAO Technical Instructions. Special Provision 125 is revised to correct an editorial error for the percentages of phlegmatizers in mixtures. A new special provision 129 is assigned to the new entry, ``Nitroglycerin mixture, desensitized, liquid, flammable, n.o.s. with not more than 30% nitroglycerin, by mass'' to require that the material's classification, transportation, packing group assignment and packaging must be approved by the Associate Administrator for Hazardous Materials Safety. A new special provision 130 is added for the entry, ``Battery, dry, not subject to the requirements of this subchapter'' to identify conditions that must be met before the material may be excepted from the HMR. A new special provision 131 is assigned to the new entry, ``Flammable solid, oxidizing, n.o.s.,'' (Packing Groups II and III), to prohibit the material from being offered for transportation unless approved by the Associate Administrator for Hazardous Materials Safety. A new special provision 132 is added for the proper shipping name, ``Ammonium nitrate fertilizers,'' UN2071. The special provision allows this material to be excepted from the requirements of the HMR provided a UN trough test (Section 38, UN Manual of Test and Criteria) demonstrates that the material is not liable to self-sustaining decomposition, and that the material does not contain an excess of nitrate greater than 10% by mass. This material is only regulated when offered for transportation by aircraft and vessel modes. A new special provision 133 is added for the new entry, ``Air bag inflators, compressed gas or Air bag modules, compressed gas or Seat- belt pretensioners, compressed gas,'' to [[Page 10746]] clarify which articles should be transported under these shipping descriptions. The special provision provides conditions for packaging and design of these articles. In the NPRM, RSPA inadvertently included articles containing a Division 2.1 gas for which authorization for transportation is being retained under an exemption. This error is corrected in this final rule. The air bag and seat-belt pretensioner descriptions listed in the HMT may be used only for articles that may be excluded from Class 1. A new special provision 134 is added for the entry ``Battery- powered vehicle or Battery-powered equipment'' to identify the entry as being used for battery-powered equipment or vehicles. A new special provision 135 is added for the new entries, ``Engines, internal combustion, flammable gas powered,'' ``Engines, internal combustion, flammable liquid powered,'' ``Vehicle, flammable gas powered,'' and ``Vehicle, flammable liquid powered'' to indicate the appropriate shipping description to be used when internal combustion engines are installed in a vehicle. A new special provision 136 is added for the new entry, ``Dangerous goods in machinery or Dangerous goods in apparatus.'' The special provision clarifies the restrictions and exceptions for transporting hazardous materials under the new entry. (Also, see preamble discussion under ``The Hazardous Materials Table.'') A new special provision 137 is added for the entry, ``Cotton,'' NA1365. See preamble discussion under ``The Hazardous Materials Table (HMT).'' A new special provision 138 is added for the entry, ``Lead compounds, soluble, n.o.s.'' This special provision clarifies the definition for soluble lead compounds. A new special provision A35 is added for the new entries, ``Aviation regulated liquid, n.o.s.'' and ``Aviation regulated solid, n.o.s.,'' to clarify that the proper shipping names include any substance not meeting any of the other hazard classes, but which has certain properties that could cause extreme annoyance or discomfort in the event of spillage or leakage aboard aircraft to crew members so as to prevent their performance of duties. Special Provision 17 applies to the entry, ``Hydrogen peroxide, aqueous solutions with not less than 8 percent but less than 20 percent hydrogen peroxide (stabilized as necessary).'' Special Provision 17 would be deleted because the information it contains is duplicative with the italicized portion of the proper shipping name. Special Provision 20 is removed because it no longer is used for any entries in the HMT. Special Provision 104 is removed for consistency with the UN Recommendations and in response to a petition for rulemaking filed by the Institute of Makers of Explosives (P-1317). As proposed in the NPRM and based on a previous comment received by RSPA, Special Provision B101 is editorially revised to clarify that when intermediate bulk containers are used, only those constructed of metal are authorized. Special Provision N9 applies to the entry, ``Cotton waste, oily,'' UN1364. Special Provision N9 is deleted, consistent with the deletion of Special Provision 34 in the tenth revised edition of the UN Recommendations. Section 172.203. In Sec. 172.203, paragraph (k) is revised to reflect that the letter ``G'' in Column (1) of the HMT identifies n.o.s. and generic proper shipping names requiring a technical name. (See preamble discussion under Sec. 172.101.) Section 172.313. A new paragraph (d) is added to reflect that ``PG III'' may be marked adjacent to the POISON label as an alternative to displaying the text ``PG III,'' instead of ``Poison'' or ``Toxic,'' below the mid-line of the label. (See preamble discussion under Secs. 172.400 and 172.400a.) Sections 172.400, 172.400a. For poisonous materials in Division 6.1, Packing Group III, RSPA proposed in the NPRM to eliminate the KEEP AWAY FROM FOOD label and require the use of a POISON label on such packagings. RSPA also proposed to allow optional text on the POISON label to read ``PG III,'' instead of ``POISON'' or ``TOXIC.'' (Readers should refer to the NPRM for background information.) RSPA received approximately ten comments regarding this issue. Some of the commenters had concerns about international acceptance and harmonization of the ``PG III'' text. Several commenters suggested that RSPA delay consideration and revisit the issue in a future rulemaking to allow more time for comments and to wait until the international community adopts the provisions. One commenter requested that RSPA retain the KEEP AWAY FROM FOOD label as an alternate label. Because provisions in international regulations permit the insertion of text indicating the nature of the risk, it is RSPA's opinion that a POISON label displaying ``PG III'' as text is acceptable in international transportation. Furthermore, RSPA believes that sufficient time for comment has been offered for comments and consideration of the provisions. RSPA published an ANPRM on November 8, 1993, under Docket HM-217 (58 FR 59224), and published an NPRM on August 18, 1998 NPRM, under Docket HM-215C, addressing changes to Division 6.1, Packing Group III labeling requirements consistent with an amendment incorporated in the eighth revised edition of the UN Recommendations. Two commenters requested that RSPA consider hazardous materials employee training and cost impact when considering implementation of the change. RSPA gave consideration to these issues before publishing the NPRM, and as explained in the NPRM, and is providing a sufficient phase-in period to implement the new provisions for training and minimizes any additional costs that may be incurred. The Air Line Pilots Association (ALPA) stated its opposition to placing only the ``PG III'' marking on the POISON label. ALPA stated that placing the ``PG III'' marking on the label without the ``POISON'' or ``TOXIC'' text would not be understood by hazardous materials employees who are performing loading functions. RSPA disagrees. Section 172.401(c) allows packages of hazardous materials bearing labels which are in conformance with the UN Recommendations, ICAO Technical Instructions, IMDG Code and Canadian TDG Regulations, to be shipped in the U.S. These labels do not have text indicating the hazard, but display pictorial hazard warning symbols, which are internationally recognized. Most commenters supported an alternative label for Packing Group III, however, a few commenters suggested that RSPA consider alternatives other than the ``PG III'' text on the POISON label, such as a special handling label or that ``PG III'' be allowed to be marked adjacent to the POISON label. After consideration of commenters' recommendations, RSPA is adopting the recommendation that a ``PG III'' marking be allowed to be displayed adjacent to the POISON label as suggested by these commenters. The segregation requirements of Secs. 174.680(b), 176.600(c) and 177.841(e)(3) are revised to reflect this change. In conclusion, RSPA is eliminating the KEEP AWAY FROM FOOD label, requiring the use of a POISON label on such packagings, and allowing ``PG III'' as optional text on the POISON label or as a marking adjacent to the label. Section 172.405. Paragraph (f)(10) in 172.405 is revised to reflect that a label for a Division 6.1 Packing Group III [[Page 10747]] material may be modified to display the text ``PG III'' instead of ``POISON'' or ``TOXIC,'' below the mid-line of the label. Alternatively, ``PG III'' may be marked adjacent to the label as authorized by Sec. 172.313. (See also, Secs. 174.680, 176.600 and 177.841.) Section 172.407. The table in paragraph (b) is revised to add the lettering size requirements for SPONTANEOUSLY COMBUSTIBLE and DANGEROUS WHEN WET labels. Section 172.431. This section is removed and reserved, thereby deleting the specifications for the KEEP AWAY FROM FOOD label. Section 172.504. Consistent with the changes in Secs. 172.400, 172.400a, 172.405 and 172.407, in the paragraph (e) Table 2, the entry for Division 6.1, Packing Group III is removed and the entry for Division 6.1, Packing Group I or II, other than Zone A or B inhalation hazard is revised. Paragraph (f)(10) is revised to reflect that a placard for Division 6.1, PG III material may be modified to display the text ``PG III'' below the mid-line of the placard or adjacent to the POISON label. Section 172.553. This section is removed and reserved, in line with Sec. 172.431, to delete the specifications for the KEEP AWAY FROM FOOD label. Part 173 Section 173.1. For uniformity with other references in the HMR, the reference to the ``Recommendations of the United Nations Committee of Experts on the Transport of Dangerous Goods'' in paragraph (d) is revised to read ``UN Recommendations.'' Section 173.2a. As proposed in the NPRM, the Sec. 173.2a, paragraph (b) Precedence of Hazard Table is revised to align it with the UN Recommendations' Precedence of Hazard Table. Consistent with the UN Recommendations, RSPA is revising two entries to provide for the Division 4.3, Packing Group II hazard and the Division 5.1, Packing Group II hazards to take precedence over the Class 8 Packing Group II hazard. Section 173.25. In the NPRM, RSPA proposed to revise paragraph (b) to authorize shrink-wrapped or stretch-wrapped trays as outer packagings only if the inner packagings are not fragile, liable to break or be easily punctured (such as those made of glass, porcelain, stoneware or certain plastics). Several commenters stated that they supported the proposed change to eliminate the requirement that shrink- wrapped or stretch-wrapped trays conform to the PG III performance requirements. However, several commenters, including The Hazardous Materials Advisory Council (HMAC) and the National Paint and Coatings Association (NPCA) expressed concern with the text ``Inner packagings are not fragile, liable to break or be easily punctured'' and stated that this text may need further clarification. The Chemical Specialties Manufacturers Association (CSMA) stated that the term ``certain plastics'' should be clarified to explain what is and is not acceptable. None of the commenters offered any suggested wording. RSPA notes that the proposed text is consistent with the text in the UN Recommendations and that to clarify what is meant by fragile packagings, including ``certain plastics,'' the proposal identifies examples of such packagings (namely, ``such as packagings made of glass, porcelain, stoneware or certain plastics.''). RSPA also notes that the term ``fragile'' is used in Sec. 178.601(g)(2)(i) and that its use there has not posed any
- **truncated:** true
- **body characters:** 200952