{"operation":"document","citation":"87 FR 64384","title":"Pipeline Safety: Safety of Gas Transmission Pipelines: Repair Criteria, Integrity Management Improvements, Cathodic Protection, Management of Change, and Other Related Amendments","source_type":"rulemaking","agency":"Pipeline and Hazardous Materials Safety Administration","status":"historical","official":true,"published_on":"2022-10-25","effective_on":null,"summary":"Pipeline Safety: Safety of Gas Transmission Pipelines: Repair Criteria, Integrity Management Improvements, Cathodic Protection, Management of Change, and Other Related Amendments","machine_formats":{"json":"https://regulus.evalyn.ai/document/federal-register-c1-2022-17031.json","markdown":"https://regulus.evalyn.ai/document/federal-register-c1-2022-17031.md"},"app_url":"https://regulus.evalyn.ai/document/federal-register-c1-2022-17031","source_url":"https://www.federalregister.gov/documents/2022/10/25/C1-2022-17031/pipeline-safety-safety-of-gas-transmission-pipelines-repair-criteria-integrity-management","body":"Federal Register, Volume 87 Issue 205 (Tuesday, October 25, 2022) [Federal Register Volume 87, Number 205 (Tuesday, October 25, 2022)] [Rules and Regulations] [Page 64384] From the Federal Register Online via the Government Publishing Office [ www.gpo.gov ] [FR Doc No: C1-2022-17031] ======================================================================= ----------------------------------------------------------------------- DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part 192 [Docket No. PHMSA-2011-0023; Amdt. No. 192-132] RIN 2137-AF39 Pipeline Safety: Safety of Gas Transmission Pipelines: Repair Criteria, Integrity Management Improvements, Cathodic Protection, Management of Change, and Other Related Amendments Correction In Rule Document 2022-17031, appearing on pages 52224-52279, in the issue of Wednesday, August 24, 2022, make the following correction: 0 On page 52267, in the third column, paragraph ``(2)(i)'' is corrected to read as set forth below. Sec. 192.3 Definitions. [Corrected] * * * * * (2)(i) If the length of the wrinkle bend cannot be reliably determined, then wrinkle bend means a bend in the pipe where (h/D)*100 exceeds 2 when S is less than 37,000 psi (255 MPa), where (h/D)*100 exceeds (47000--S)/10,000 +1 for psi [324--S)/69 +1 for MPa] when S is greater than 37,000 psi (255 MPa) but less than 47,000 psi (324 MPa), and where (h/D)*100 exceeds 1 when S is 47,000 psi (324 MPa) or more. * * * * * [FR Doc. C1-2022-17031 Filed 10-24-22; 8:45 am] BILLING CODE 0099-10-P","truncated":false,"body_characters":1553}