# Hazardous Materials: Liquefied Natural Gas by Rail

- **operation:** document
- **citation:** 90 FR 28044
- **title:** Hazardous Materials: Liquefied Natural Gas by Rail
- **source type:** rulemaking
- **agency:** Pipeline and Hazardous Materials Safety Administration
- **status:** historical
- **official:** true
- **published on:** 2025-07-01
- **effective on:** Not available
- **summary:** Hazardous Materials: Liquefied Natural Gas by Rail
- **machine formats:** - **json:** https://regulus.evalyn.ai/document/federal-register-c1-2025-11436.json
- **markdown:** https://regulus.evalyn.ai/document/federal-register-c1-2025-11436.md
- **app url:** https://regulus.evalyn.ai/document/federal-register-c1-2025-11436
- **source url:** https://www.federalregister.gov/documents/2025/07/01/C1-2025-11436/hazardous-materials-liquefied-natural-gas-by-rail
**body:**

Federal Register, Volume 90 Issue 124 (Tuesday, July 1, 2025) [Federal Register Volume 90, Number 124 (Tuesday, July 1, 2025)] [Rules and Regulations] [Page 28044] From the Federal Register Online via the Government Publishing Office [ www.gpo.gov ] [FR Doc No: C1-2025-11436] [[Page 28044]] ======================================================================= ----------------------------------------------------------------------- DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Parts 172, 173, 174, 179, and 180 [Docket No. PHMSA-2018-0025 (HM-264)] RIN 2137-AF40 Hazardous Materials: Liquefied Natural Gas by Rail Correction In rule document 2025-11436, appearing on pages 26455 through 26459 in the issue of Monday, June 23, 2025, make the following correction: 0 On page 26459, in the first column, from the top of the page, lines 24 through 30 in Part 179.400-8 are corrected as set forth below. Sec. 179.400-8 Thickness of plates [Corrected] (d)(1) The minimum wall thickness, after forming, of the outer jacket shell may not be less than \7/16\ inch. The minimum wall thickness, after forming, of the outer jacket heads may not be less than \1/2\ inch and they must be made from steel specified in Sec. 179.16(c). [FR Doc. C1-2025-11436 Filed 6-30-25; 8:45 am] BILLING CODE 0099-10-P
- **truncated:** false
- **body characters:** 1338