# Marking of Materials

- **operation:** document
- **citation:** Fla. Admin. Code R. 25-12.028
- **title:** Marking of Materials
- **source type:** regulation
- **agency:** Florida Public Service Commission
- **status:** current
- **official:** true
- **published on:** Not available
- **effective on:** 1992-01-07
- **summary:** (1) Each valve, fitting, length of pipe, or other component must be clearly marked as prescribed in the specification or standard to which it was manufactured. (2) An operator must obtain prior approval from the Commission's Bureau of Safety in order to make any marking alterations or remarking afte
- **machine formats:** - **json:** https://regulus.evalyn.ai/document/fl-fac-25-12.028.json
- **markdown:** https://regulus.evalyn.ai/document/fl-fac-25-12.028.md
- **app url:** https://regulus.evalyn.ai/document/fl-fac-25-12.028
- **source url:** https://flrules.org/gateway/RuleNo.asp?ID=25-12.028
**body:**

(1) Each valve, fitting, length of pipe, or other component must be clearly marked as prescribed in the specification or standard to which it was manufactured.

(2) An operator must obtain prior approval from the Commission's Bureau of Safety in order to make any marking alterations or remarking after acceptance of delivery, except for remarking pipe after coating.
- **truncated:** false
- **body characters:** 367