{"operation":"document","citation":"HAR 6-77-120","title":"HAR 6-77-120 New service lines not in use","source_type":"regulation","agency":"Hawaii Public Utilities Commission","status":"current","official":true,"published_on":"1994-04-15","effective_on":"1994-09-03","summary":"upon completion of installation must comply with one of the following until the customer is supplied with gas: (1) the valve that is closed to prevent the flow of gas to the customer must be provided with a locking device or other means designed to prevent the opening of the valve by persons other t","machine_formats":{"json":"https://regulus.evalyn.ai/document/hi-har-har-6-77-120.json","markdown":"https://regulus.evalyn.ai/document/hi-har-har-6-77-120.md"},"app_url":"https://regulus.evalyn.ai/document/hi-har-har-6-77-120","source_url":"https://puc.hawaii.gov/wp-content/uploads/2026/04/HAR-6-77-Transp-of-Gas-03-31-2026.pdf","body":"upon completion of installation must comply with one of the following until the customer is supplied with gas: (1) the valve that is closed to prevent the flow of gas to the customer must be provided with a locking device or other means designed to prevent the opening of the valve by persons other than those authorized by the operator; (2) A mechanical device or fitting that will prevent the flow of gas must be installed in the service line or in the meter assembly; or (3) The customer's piping must be physically disconnected from the gas supply and the open pipe ends sealed. [Eff ] (Auth: HRS '269-6) (Imp: 49 C.F.R. '192.379, October 1, 1990) Subchapter 11 Minimum Safety Standards - Requirements for Corrosion Control","truncated":false,"body_characters":727}