# Joining Plastic Pipe by Heat Fusion; Equipment Maintenance and Calibration [49 CFR 192.756]

- **operation:** document
- **citation:** LAC 43:XIII §2956
- **title:** Joining Plastic Pipe by Heat Fusion; Equipment Maintenance and Calibration [49 CFR 192.756]
- **source type:** regulation
- **agency:** Louisiana Office of Conservation
- **status:** current
- **official:** true
- **published on:** Not available
- **effective on:** Not available
- **summary:** A. Each operator must maintain equipment used in joining plastic pipe in accordance with the manufacturer's recommended practices or with written procedures that have been proven by test and experience to produce acceptable joints. [49 CFR 192.756] AUTHORITY NOTE: Promulgated in accordance with R.S.
- **machine formats:** - **json:** https://regulus.evalyn.ai/document/la-lac-43-xiii-2956.json
- **markdown:** https://regulus.evalyn.ai/document/la-lac-43-xiii-2956.md
- **app url:** https://regulus.evalyn.ai/document/la-lac-43-xiii-2956
- **source url:** https://www.doa.la.gov/doa/osr/louisiana-administrative-code/
**body:**

A. Each operator must maintain equipment used in joining plastic pipe in accordance with the manufacturer's recommended practices or with written procedures that have been proven by test and experience to produce acceptable joints. [49 CFR 192.756]

AUTHORITY NOTE: Promulgated in accordance with R.S. 30:501 et seq.

HISTORICAL NOTE: Promulgated by the Department of Natural Resources, Office of Conservation, LR 46:1597 (November 2020).
- **truncated:** false
- **body characters:** 438