{"operation":"document","citation":"16 NYCRR 255.193","title":"255.193 Valve installation in plastic pipe.","source_type":"regulation","agency":"New York State Public Service Commission","status":"current","official":true,"published_on":null,"effective_on":null,"summary":"Transmission and Distribution of Gas. Each valve installed in plastic pipe must be designed so as to protect the plastic material against excessive torsional or shearing loads when the valve or shut-off is operated, and from any other secondary stresses that might be exerted through the valve or its enclosure.","machine_formats":{"json":"https://regulus.evalyn.ai/document/ny-nycrr-255-193.json","markdown":"https://regulus.evalyn.ai/document/ny-nycrr-255-193.md"},"app_url":"https://regulus.evalyn.ai/document/ny-nycrr-255-193","source_url":"https://govt.westlaw.com/nycrr/Document/I505c970bcd1711dda432a117e6e0f345?viewType=FullText&originationContext=documenttoc&transitionType=CategoryPageItem&contextData=(sc.Default)","body":"Each valve installed in plastic pipe must be designed so as to protect the plastic material against excessive torsional or shearing loads when the valve or shut-off is operated, and from any other secondary stresses that might be exerted through the valve or its enclosure.","truncated":false,"body_characters":273}