# 255.193 Valve installation in plastic pipe.

- **operation:** document
- **citation:** 16 NYCRR 255.193
- **title:** 255.193 Valve installation in plastic pipe.
- **source type:** regulation
- **agency:** New York State Public Service Commission
- **status:** current
- **official:** true
- **published on:** Not available
- **effective on:** Not available
- **summary:** Transmission and Distribution of Gas. Each valve installed in plastic pipe must be designed so as to protect the plastic material against excessive torsional or shearing loads when the valve or shut-off is operated, and from any other secondary stresses that might be exerted through the valve or its enclosure.
- **machine formats:** - **json:** https://regulus.evalyn.ai/document/ny-nycrr-255-193.json
- **markdown:** https://regulus.evalyn.ai/document/ny-nycrr-255-193.md
- **app url:** https://regulus.evalyn.ai/document/ny-nycrr-255-193
- **source url:** https://govt.westlaw.com/nycrr/Document/I505c970bcd1711dda432a117e6e0f345?viewType=FullText&originationContext=documenttoc&transitionType=CategoryPageItem&contextData=(sc.Default)
**body:**

Each valve installed in plastic pipe must be designed so as to protect the plastic material against excessive torsional or shearing loads when the valve or shut-off is operated, and from any other secondary stresses that might be exerted through the valve or its enclosure.
- **truncated:** false
- **body characters:** 273