{"operation":"document","citation":"16 NYCRR 255.359","title":"255.359 Customer meter installations: operating pressure.","source_type":"regulation","agency":"New York State Public Service Commission","status":"current","official":true,"published_on":null,"effective_on":null,"summary":"Transmission and Distribution of Gas. (a) A meter may not be used at a pressure that is more than 67 percent of the manufacturer's shell test pressure.\n\n(b) Each newly installed meter manufactured after November 12, 1970, must have been tested to a minimum of 10 psig (69 kPa).\n\n(c) A rebuilt or repaired tinned steel case meter may not be used at a pressure that is more than 50 percent of the pre","machine_formats":{"json":"https://regulus.evalyn.ai/document/ny-nycrr-255-359.json","markdown":"https://regulus.evalyn.ai/document/ny-nycrr-255-359.md"},"app_url":"https://regulus.evalyn.ai/document/ny-nycrr-255-359","source_url":"https://govt.westlaw.com/nycrr/Document/I505ce525cd1711dda432a117e6e0f345?viewType=FullText&originationContext=documenttoc&transitionType=CategoryPageItem&contextData=(sc.Default)","body":"(a) A meter may not be used at a pressure that is more than 67 percent of the manufacturer's shell test pressure.\n\n(b) Each newly installed meter manufactured after November 12, 1970, must have been tested to a minimum of 10 psig (69 kPa).\n\n(c) A rebuilt or repaired tinned steel case meter may not be used at a pressure that is more than 50 percent of the pressure used to test the meter after rebuilding or repairing.","truncated":false,"body_characters":419}