{"operation":"document","citation":"00-0144","title":"Midwest Rubber Mfg., Inc. — Hazardous Materials Safety Interpretation","source_type":"guidance","agency":"Pipeline and Hazardous Materials Safety Administration","status":"guidance","official":true,"published_on":"2000-06-05","effective_on":null,"summary":"00-0144 response to Midwest Rubber Mfg., Inc. concerning 172.400.","machine_formats":{"json":"https://regulus.evalyn.ai/document/phmsa-interpretation-00-0144.json","markdown":"https://regulus.evalyn.ai/document/phmsa-interpretation-00-0144.md"},"app_url":"https://regulus.evalyn.ai/document/phmsa-interpretation-00-0144","source_url":"https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretation%20Files/2000/000144.pdf","body":"<<<PAGE 1>>>\n\nJ.S. Department\nf Transportatior\n40D Seventh Street, S.W\nNashington, D.C. 20590\nSpecial Programs\nResearch and\nAdministration\nJUN 5 2000\nMs. Darlene Rauk\nMidwest Rubber Mfg., Inc.\nP. O. Box 207\nRef. No. 00-0144\n250 Industrial Circle\nStoughton, WI 53589\nDear Ms. Rauk:\nThis is in response to your letter dated May 5, 2000 requesting verification on the proper\nshipping of Adhesives, 3, UN 1133, PG II. You ask if it is possible to ship 8 oz. cans in a case of\n24, weighing 13 Ibs. per case, without labeling the cans. You further state that the case would be\npalletized and shrink-wrapped.\nThe labeling requirements found in 49 CFR 172.400 require each non-bulk package (i.e., case) to\nbe labeled with the label specified in the § 172.101 Table for the material. In your situation, the\nhazard warning labels are only required on the outside package and are not required to be placed\npackages are not visible, the label and other markings must be placed on the shrink-wrapped film-\non inner packages (i.e., cans). If several cases are shrink-wrapped, and the labels on the\noverpack. See § 173.25.\nI hope his information is helpful.\nSincerely,\nHotte z, Mitchell\nHattie L. Mitchell\nChief, Regulatory Review and Reinvention\nOffice of Hazardous Materials Standards\n172.400\n000144\n\n<<<PAGE 2>>>\n\ncorbin\n$ 172.400\nP.O. BOX 207, STOUGHTON, WISCONSIN 535BS\nMIDWEST RUBBER MFG., INC.\n00 - 0144\nPHONE 608/873-7788 FAX 60B/B73-5880\nMay 5, 2000\nAttn:\nEdward Mazzullo (fax - 202-366-3012)\nDepartment of Transportation\nHazardous Material Dept\nFrom:\nMidwest Rubber Mfg., Inc\nDarlene Rauk (fax - 608-873-5880)\nPO BOX 207 - 250\nstoughton, WI\n53589\nIndustrial Circle\nPages:\n1\nRegarding: Labeling of shipping hazardous materials\nDear Mr. Mazzullo:\nshipping of the following. ADHESIVES, 3, UN 1133, PG II.\nI was informed to contact you for verification on the proper\nWe have a customer who has requested if it is possible to\nlabeling the cans.\nship, 8 oz cans in a case of 24, 13 pounds per case,\nwithout\nthem.\nWe would label the outside of the case with all the\nThey would like to label them when they come to\npossibility of non-hazardous products.\nspecified labels, the case would be put on a pallet with a\nwith extra cardboard and more stretch wrap and labels will also be\nWe stretch wrap the pallet\nput on the outside of this.\nverification of this as soon as possible. Thank you.\nI would like a written\nsincerely,\nDartene Rank\nDarlene Rauk\nOHIO OFFICE: P.O. Box 5393 Fairlawn, OH 44334 Phone: (330) 867-6262","truncated":false,"body_characters":2502}