# Chemical Accident Reconstruction Services Inc — Hazardous Materials Safety Interpretation

- **operation:** document
- **citation:** 04-0143
- **title:** Chemical Accident Reconstruction Services Inc — Hazardous Materials Safety Interpretation
- **source type:** guidance
- **agency:** Pipeline and Hazardous Materials Safety Administration
- **status:** guidance
- **official:** true
- **published on:** 2004-06-30
- **effective on:** Not available
- **summary:** 04-0143 response to Chemical Accident Reconstruction Services Inc concerning 172.101, 173.22.
- **machine formats:** - **json:** https://regulus.evalyn.ai/document/phmsa-interpretation-04-0143.json
- **markdown:** https://regulus.evalyn.ai/document/phmsa-interpretation-04-0143.md
- **app url:** https://regulus.evalyn.ai/document/phmsa-interpretation-04-0143
- **source url:** https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretation%20Files/2004/040143.pdf
**body:**

<<<PAGE 1>>>

of Transportation
U.S. Department
JUN 30 2004
400 Seventh St., S.W.
Washington, D.C. 20590
Research and
Administration
Special Programs
Michael Fox, Ph.D.
Chemical Accident.
Reconstruction
Ref. No.
04-0143
Services Inc.
9121 E. Tanque Verde Road
# 105
Tucson, AZ 85749
Dear Dr. Fox:
This is in response to your May 24, 2004 letter and subsequent
classification of
telephone conversation with a member of my staff concerning the
a material in accordance with the Hazardous
i concerning the
Materials Regulations (HMR; 49 CFR Parts 171-180).
properly classify
Under 49 CFR 173.22, it is the shipper's responsibility to
a material in accordance with the hazard class
definitions in part 173 or to determine that the material does
not meet a hazard class definition and does not meet the
definition in § 171.8 of a hazardous substance, hazardous waste
or a marine pollutant.
If a material meets a hazard class
hazardous waste or a marine pollutant but is not listed by name
definition, or meets the definition of a hazardous substance,
must be made from
in the § 172.101 table, then selection of a proper shipping name
corresponding to the specific hazard class, packing group, and
subsidiary hazards of the material.
I hope this
satisfies your request.
Sincerely.
1 hor
Standards Development
Office of Hazardous Materials Standards
$172.101
040143
8/73.22

<<<PAGE 2>>>

-
Chemical Accident Reconstruction Services, Inc.
May 24, 2004
Via First Class Mail
BAH
U.S. Department of Transportation
Office of Hazardous Materials Standards
$172.101
ATTN: Director
Washington, D.C 20.590
Shipping Name
04-0143
Re: Emergency Response Information
Dear Director:
It is my understanding from reviewing the DOT Regulations (49 CFR 172.602) and
letters of clarification that the requirement for Emergency Response Information (ERI) is
fulfilled if the bill of lading contains the appropriate information along with the UN
number for the hazardous material and the DOT Emergency Response Guide (ERG) is
also available.
In many instances the hazardous materials are listed by name in the DOT table 172.101.
However, in many other instances the materials are not listed by name.
My question is, when the material is not listed by name, what steps or procedures must be
followed to assign the "appropriate" UN number? In other words, is an "educated guess"
at the UN number acceptable, or are there specific steps and procedures that must be
followed? What if the material is relatively new and has not been fully characterized?
What if toxicity has not yet been determined? What sort of documentation and record
keeping are required?
Thank you for your assistance.
Sincerely,
MICHAEL FiX
Michael Fox, Ph.D.
Founder
9121 E. Tanque Verde Road #105, Tueson, Arizona 85749
800-MIKE-FOX (645-3369)
Fax: 520-749-0861
- **truncated:** false
- **body characters:** 2804
