# Gas Service and supply — Hazardous Materials Safety Interpretation - **operation:** document - **citation:** 06-0081 - **title:** Gas Service and supply — Hazardous Materials Safety Interpretation - **source type:** guidance - **agency:** Pipeline and Hazardous Materials Safety Administration - **status:** guidance - **official:** true - **published on:** 2006-05-09 - **effective on:** Not available - **summary:** 06-0081 response to Gas Service and supply concerning 173.29, 173.5a. - **machine formats:** - **json:** https://regulus.evalyn.ai/document/phmsa-interpretation-06-0081.json - **markdown:** https://regulus.evalyn.ai/document/phmsa-interpretation-06-0081.md - **app url:** https://regulus.evalyn.ai/document/phmsa-interpretation-06-0081 - **source url:** https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretation%20Files/2006/060081.pdf **body:** <<>> J.S. Department of Transportatior Washington, D.C. 20590 400 Seventh Street, S.W. Pipeline and Hazardous Materials Safety Administration MAY - 9 2006 Mr. Don Lampshire Ref. No. 06-0081 President Gas Service and supply 3396 Swan Lake Road Bossier City, LA 71111 Dear Mr. Lampshire: This responds to your April 4, 2006 letter requesting clarification on the shipment of meter provers under the Hazardous Materials Regulations (HMR; 49 CFR Parts 171- 180). Specifically, you ask if your volumetric provers are excepted from any packaging requirements under the HMR. According to your letter, your company manufactures volumetric provers used to calibrate meter deliveries of gasoline, diesel, or propane. When calibrations are storage tank. The provers are transported with residual vapors (no liquid) from the completed, all the liquid from the volumetric provers is transferred back to the customer product previously transferred during the calibration. You ask if your meter provers are excepted from any packaging requirements under the HMR. The answer is yes. Section 173.5a provides requirements for the shipment of meter requirements in Part 178 of the HMR provided the provisions in § 173.5a (b)(2)(i-v) are provers. Section 173.5a(b)(2) excepts meter provers from the specification packaging met. I hope this answers your inquiry. Sincerely, Chief, Standards Development Office of Hazardous Materials Standards 173.5a (b) 2) 173.2 060081 <<>> Page 1 of 1 Drakeford, Carolyn From: Gorsky, Susan Sent: Tuesday, April 04, 2006 7:52 AM Boothe To: Drakeford, Carolyn $ 173-29173.52 Subject: FW: Importance: High Residue Emply Packagings One for the interp data base. Thanks. 06-0081 Susan From: Don Lampshire [mailto:sales@gssprovers.com] To: Shelton, Danny Sent: Thursday, March 30, 2006 5:51 PM Subject: Importance: High Gas Service and Supply is a manufacturer of volumetric provers. This particular group of provers Help!!! please provide me with an interpretation on the following- are used to calibrate meter deliveries of either gasoline, diesel, or propane liquids. The gasoline to the largest 1000 gallons. The storage part of these provers are use for the transfer of liquid at and diesel provers are always equipped with storage that can range from the smallest 5 gallons the facility where the meter calibrations are being done. When the calibrations are finished, all the liquid is transferred back to the customer storage. The provers in question would be traveling alibration. Would this material of trade be exempt from any packaging (DOT) requirements? n interstate and intrastate with residual vapors (no liquid from the product you had just transferred during the Don Lampshire Best Regards, President 3396 Swan Lake Rd Gas Service and Supply Bossier City, LA 71111 318-742-5881 phone website: www.gssprovers.com 318-747-3425 fax email: sales@gssprovers.com 173.500 meter poonen) Meter prouds 4/4/2006 - **truncated:** false - **body characters:** 2977