# GEO Specialty Chemicals — Hazardous Materials Safety Interpretation - **operation:** document - **citation:** 08-0175 - **title:** GEO Specialty Chemicals — Hazardous Materials Safety Interpretation - **source type:** guidance - **agency:** Pipeline and Hazardous Materials Safety Administration - **status:** guidance - **official:** true - **published on:** 2008-07-24 - **effective on:** Not available - **summary:** 08-0175 response to GEO Specialty Chemicals concerning 172.332, 172.514. - **machine formats:** - **json:** https://regulus.evalyn.ai/document/phmsa-interpretation-08-0175.json - **markdown:** https://regulus.evalyn.ai/document/phmsa-interpretation-08-0175.md - **app url:** https://regulus.evalyn.ai/document/phmsa-interpretation-08-0175 - **source url:** https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretation%20Files/2008/080175.pdf **body:** <<>> U.S. Department of Transportation Pipeline and Hazardous Materials Safety Administration 1200 New Jersey Ave.. S.E. Washington. DC 20590 JUL 2 4 2008 Mr. Matt Beasley GEO Specialty Chemicals 70 1 Wissahickon Avenue Cedartown, GA 30 125 Ref. No. 08-0 175 Dear Mr. Kehrli: This responds to your July 2,2008 letter requesting clarification of the placarding and labeling requirements for intermediate bulk containers (IBCs) under the Hazardous Materials Regulations (HMR; 49 CFR Parts 17 1 - 180). Specifically, you ask if the exception from placarding provided in $ 172.5 14(c) would allow the use of labels, rather than placards, on 175 gallon IBCs containing corrosive materials. In accordance with $ 172.5 14, except as provided in paragraph (c), each person who offers for transportation a bulk packaging that contains a hazardous material must affix the placards specified for the material in $9 172.504 and 172.505. The bulk packaging placarding exception for IBCs provided in 9 172.5 14(c)(4) excepts an IBC from placarding if it is labeled in accordance with Part 172, Subpart E of the HMR. Therefore, the HMR allow the use of CORROSIVE labels on 175 gallon IBCs containing corrosive materials. You should also note that an IBC must be marked with an identification number as specified in $$ 172.332 and 172.336. The authorized sizes and options for display of acceptable identification number markings are prescribed in $ 172.332. The options include an orange panel, a placard, or a white square-on-point configuration. For an IBC contained in or on a transport vehicle or freight container, if the identification number marking on the IBC is not visible, the transport vehicle or freight container must be marked as required by 9 172.332. I hope this information is helpful. Please contact us if you require additional assistance. Sincerely, Susan Gorsky Acting Chief, Standards Development Office of Hazardous Materials Standards <<>> Drakeford. Carolvn cPHMSA> From: Sent: To: Subject: INFOCNTR Wednesday, July 02,2008 2:55 PM Drakeford, Carolyn FW: Information Center Comments/Questions Request for a written letter of interp ----- Original Message----- From: matt.beasley@geosc.com [mailto:matt.beasley@geosc.com] Sent: Wednesday, July 02, 2008 3:04 PM To: INFOCNTR Subject: Information Center Comments/Questions Below is the result of your feedback form. It was submitted by Matt Beasley (matt.beasley@geosc.com) on Wednesday, July 2, 2008 at 15:03:39. Name: Matt Beasley Category: Emergency Response Information (Sections 172.1 - 172.807) Organization: GEO Specialty Chemicals Street: 701 Wissahickon Ave City: Cedartown State : Georgia Zip Code: 30125 Phone: 770 748 1200 283 Comments: Because of conflicting opinions from "experts" in the field, we would like to get confirmation in writing re: the interpretation of 172.514(c) that we can place the 4" x 4" diamond "CORROSIVE" labels on 175 gallon totes (IBCs) instead of the placards. We understand we will still need the 1" tall letters with the Proper Shipping Name near each label. Thank you - **truncated:** false - **body characters:** 3111