# HazMat Resources, Inc. — Hazardous Materials Safety Interpretation

- **operation:** document
- **citation:** 09-0039
- **title:** HazMat Resources, Inc. — Hazardous Materials Safety Interpretation
- **source type:** guidance
- **agency:** Pipeline and Hazardous Materials Safety Administration
- **status:** guidance
- **official:** true
- **published on:** 2009-03-17
- **effective on:** Not available
- **summary:** 09-0039 response to HazMat Resources, Inc. concerning 172.313, 172.328, 172.516.
- **machine formats:** - **json:** https://regulus.evalyn.ai/document/phmsa-interpretation-09-0039.json
- **markdown:** https://regulus.evalyn.ai/document/phmsa-interpretation-09-0039.md
- **app url:** https://regulus.evalyn.ai/document/phmsa-interpretation-09-0039
- **source url:** https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretation%20Files/2009/090039.pdf
**body:**

<<<PAGE 1>>>

U.S. Department of Transportation Pipeline and Hazardous Materials
Safety Administration
1200 New Jersey Ave, S.E.
Washington, D.C. 20590
MAR 1 7 2009
Mr. Danny Shelton
Vice President, Business Development
HazMat Resources, Inc.
10 104 Creedmoor Road
Raleigh, NC 276 1 5
Ref. No. 09-0039
Dear Mr. Shelton:
This is in response to your letter dated February 18, 2009, requesting clarification of
$ 5 172.504 and 172.5 16 of the Hazardous Materials Regulations (HMR; 49 CFR Parts 17 1 -
180). Specifically, you ask several questions regarding the display of the proper shipping
name and the term "Inhalation Hazard" on a cargo tank motor vehicle.
Q1. Is it acceptable to display the proper shipping name on a panel permanently attached to
the structure of the cargo tank provided the proper shipping name is clearly visible from any
direction?
Al. As required by 172.328, each cargo tank motor vehicle transporting Class 2 material
must be marked on each side an each end with the proper shipping name specified for the gas
in the hazardous materials table or an appropriate common name for the material. A panel
permanently attached to the motor vehicle may be used to comply with this requirement.
42. Is it acceptable to display "Inhalation Hazard" on a structure of the cargo tank that is visible from any direction?
permanently attached to the
A2. As required by 5 172.3 13, the words "Inhalation Hazard" must be marked on two
opposing sides of a bulk packaging. A panel permanently attached to the motor vehicle may
be used to comply with this requirement.
43. Does the phrase "visible from the direction it faces" as used in 5 172.5 16 mean the
placard must be at eye level or can the placard be placed in another location such as the top
head of the cargo tank or another location on the cargo tank provided the placard is visible
from the direction it faces?
A3. The phrase "visible from the direction it faces" as it is used in this case does not imply
the placard must be mounted in any specific position on the cargo tank. However, a placard
must be located clear of appurtenances and devices such as ladders or pipes; placed so that

<<<PAGE 2>>>

dirt and water is not directed to it from the wheels of the transport vehicle; be located away
from any markings that could substantially reduce its effectiveness; maintained so that its
legibility, color, and visibility are not substantially reduced because of damage, deterioration,
or obscurement; and otherwise conform to the detailed visibility requirements established in
$ 172.516.
I hope this answers your inquiry.
Sincerely,
Charles E. Betts
Chief, Standards Development
Office of Hazardous Materials Standards

<<<PAGE 3>>>

Page 1 of 3
Drakeford, Carolyn <PHMSA>
From: Mitchell, Hattie <PHMSA>
Sent: Wednesday, February 18,2009 4:16 PM
To: Drakeford, Carolyn <PHMSA>
Subject: FW: Display of markings on cargo tanks
Attachments: Communication Requirements 1 .pdf
Carolyn, please log in as an interp request.
From: Danny Shelton [mailto:dgshelton@nc.rr.com]
Sent: Sunday, February 15, 2009 3:05 PM
To: Mitchell, Hattie <PHMSA>
Cc: dgshelton@nc.rr.com
Subject: Display of markings on cargo tanks
Good mori~ing Hattie, hope you enjoyed your Presidents Day
holiday. As we discussed last week I have attached for your review
various displays of shipping names, ID numbers on placards, and the
phrase "Inhalation Hazard" on cargo tanks. The Department defines
a cargo tank as follows:
Cargo tank means a bulk packaging that: (1) Is a tank intended
primarily for the carriage of liquids or gases and includes
appurtenances, reinforcements, fittings, and closures (for the
definition of a tank, see 49 CFR 178.320, 178.337-1, or 178.338-1, as
applicable);
(2) Is permanently attached to or forms a part of a motor vehicle, or is
not permanently attached to a motor vehicle but which, by reason of
its size, coi~struction or attachment to a motor vehicle is loaded or
unloaded without being removed from the motor vehicle; and
(3) Is not fabricated under a specification for cylinders, intermediate
bulk containers, multi-unit tank car tanks, portable tanks, or tank cars.
The Department goes on to define motor vehicle as follows:
Motor vehicle includes a vehicle, machine, tractor, trailer or
semitrailer, or any combination thereof, propelled or drawn by

<<<PAGE 4>>>

Page 2 of 3
mechanical power and used upon the highways in the transportation
of passengers or property. It does not include a vehicle, locomotive,
or car operated exclusively on a rail or rails, or a trolley bus operated
by electric power derived from a fixed overhead wire, furnishing
local passenger transportation similar to street-railway service.
In addition, the Department defines cargo tank motor vehicle as
follows:
Cargo tank motor vehicle means a motor vehicle with one or more
cargo tanks permanently attached to or forming an integral part of the
motor vehicle.
We cannot clearly define what a cargo tank really is unless we read
all three definitions together. A cargo tank can be permanently
attached to or forms part of a motor vehicle, a motor vehicle is a
trailer and a cargo tank motor vehicle is a motor vehicle (trailer) with
a cargo tank attached to the trailer.
It is the intent of the communication requirements that the markings, -
placards and any other additional descriptive terms that are required
based on the product being transported be visible from the direction
that it faces to ensure that emergency response personnel can
determine the potential hazards that may be present during an HM
Incident. The regulations say these markings must be on the cargo
tank, on the bulk package, etc., but in no case do they ever say them
must be affixed to the cargo tank wall. Clearly in the illustrations
provided all the markings are clearly visible from the direction they
face and the definition of a cargo tank would allow a person to
display this information in this manner because what is being
illustrated in these pictures is a cargo tank, a bulk package, a motor
vehicle and a cargo tank motor vehicle and they are all one and the
same.

<<<PAGE 5>>>

Page 3 of 3
Based on the regulations as written today please reply to the
following questions:
1. Is it acceptable to display the proper shipping name on a panel
permanently attached to the structure of the cargo tank that is
visible from the direction that it faces irrespective of whether
that direction is forward, aft, or laterally?
2. Is it acceptable to display the term "Inhalation Hazard" on a
panel permanently attached to the structure of the cargo tank that
is visible from the direction that it faces irrespective of whether
that direction is forward, aft, or laterally??
3. Does the phrase visible from the direction it faces mean that it
must be at eye level or it can it be mounted on top of the head of
the cargo tank, mounted near the bottom of the cargo tank or
anywhere on the cargo tank as long as it is visible from the
direction it faces?
Thank you for your interest in highway safety.

<<<PAGE 6>>>

See illustration4
Is it acceptable to display
the placard and ID
number on the stainless
steel plate identified as
placard and display the
shipping name and the
phrase "Inhalation
Hazard" on a plate
permanently attached to
the cargo tank structure
on the front and rear of
the cargo tank and on
each side of the cargo
tank or must these terms
be physically displayed
on the cargo tank wall?
- **truncated:** false
- **body characters:** 7444
