# Donaldson Company — Hazardous Materials Safety Interpretation

- **operation:** document
- **citation:** 09-0234
- **title:** Donaldson Company — Hazardous Materials Safety Interpretation
- **source type:** guidance
- **agency:** Pipeline and Hazardous Materials Safety Administration
- **status:** guidance
- **official:** true
- **published on:** 2009-12-01
- **effective on:** Not available
- **summary:** 09-0234 response to Donaldson Company concerning 172.504.
- **machine formats:** - **json:** https://regulus.evalyn.ai/document/phmsa-interpretation-09-0234.json
- **markdown:** https://regulus.evalyn.ai/document/phmsa-interpretation-09-0234.md
- **app url:** https://regulus.evalyn.ai/document/phmsa-interpretation-09-0234
- **source url:** https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretations/2009/090234.pdf
**body:**

<<<PAGE 1>>>

U.S. Department otTransportation Pipeline and Hazardous Materials
Safety Administration
1200 New Jersey Ave, S.E.
Washington, D.C. 20590
DEC 1 2009
Mr. Tom Zweber
Donaldson Company
9250 W. Bloomington Freeway
Bloomington, MN 55431
Ref. No. 09-0234
Dear Mr. Zweber:
This responds to your October 15,2009 request for clarification of the Hazardous Materials
Regulations (HMR; 49 CFR Parts 171-180). Specifically, you ask whether placards are
required for a shipment of less than 1,000 pounds ofhazardous materials in a company
vehicle that will be transported to another company building two blocks from your main
campus. In addition, you ask ifthe driver of a company vehicle transporting two quarts of
isopropal alcohol must have a commercial driver's license (CDL) with a hazardous materials
endorsement.
In accordance with § 172.504( c), placards are not required on a transport vehicle or freight
container that contains less than 1,001 pounds aggregate gross weight of the hazardous
materials listed in Table 2 in § 172.504(e)(2) when packaged in non-bulk packagings.
Placards are required for hazardous materials in bulk packagings, hazardous materials
transported on a transport vehicle or freight container in non-bulk packagings with an
aggregate gross weight of 1,001 pounds ofgreater, and any quantity ofthe hazardous
materials listed in Table 1 in § 172.504«e)(2).
Regulations governing licensing requirements for commercial drivers are in 49 CPR Part
383. A commercial driver must have a CDL with a hazardous materials endorsement ifhe or
she transports hazardous materials required to be placarded under the HMR or any quantity
ofa material listed as a select agent or toxin in 42 CFR part 73. A driver need not have a
CDL with a hazardous materials endorsement ifhe or she is transporting a package

<<<PAGE 2>>>

containing two quarts of isopropal alcohol. Specific questions about commercial driver
licensing requirements should be directed to the Federal Motor Carrier Safety Administration
(FMCSA) at 202-366-6121.
I hope this answers your inquiry. If you need additional assistance, do not hesitate to contact
this office.
sin::J'0-Mr
Charles E. Betts
Chief, Standards Development
ffice of Hazardous Materials Standards

<<<PAGE 3>>>

Drakeford, Carolyn (PHMSA)
From: Lawson, Eleanor (PHMSA)
Sent: Friday, October 16, 2009 10:10 AM
To: Drakeford, Carolyn (PHMSA)
Subject: FW: Approvals Feedback: Other Questions?
~e
~ (f z. ~ I 0 (
A.pI'
It c.Wo,' (,' :J
OCf- 02..-51
-----Original Message----From:
PHMSA-Feedback [mailto:PHMSA-Feedback]
Sent:
Thursday, October 15, 2009 8:32 AM To: Approvals (PHMSA)i PHMSA Webmaster
Subject: Approvals Feedback: Other Questions?
Can I transport haz-mat material under 1000 Ibs.in a company vehicle, to another company
building 2 blocks from my main campus, with out vehicle plac cards? Can I transpot a small
amount of isoprople alcohol{2 quarts}in the same manner with out haz-mat driver
indorsment? Please advise on transporting small amounts of haz-mat materials by co.
employee.Do you have a contact person I can talk to about this issue?
Thank you
Tom Zweber
Company: Donaldson Co.
Address: 9250 w. Bloomington Freway
City: Bloomington
Zip Code: 55431
Phone: 952-887-3129
Email: tom.zweber@donaldson.com
1
- **truncated:** false
- **body characters:** 3278
