{"operation":"document","citation":"09-0281","title":"FDSE, Inc. — Hazardous Materials Safety Interpretation","source_type":"guidance","agency":"Pipeline and Hazardous Materials Safety Administration","status":"guidance","official":true,"published_on":"2010-04-14","effective_on":null,"summary":"09-0281 response to FDSE, Inc. concerning 171.1.","machine_formats":{"json":"https://regulus.evalyn.ai/document/phmsa-interpretation-09-0281.json","markdown":"https://regulus.evalyn.ai/document/phmsa-interpretation-09-0281.md"},"app_url":"https://regulus.evalyn.ai/document/phmsa-interpretation-09-0281","source_url":"https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretations/2009/090281.pdf","body":"<<<PAGE 1>>>\n\nU.S. Department of Transportation Pipeline and Hazardous Materials\nSafety Administration\n1200 New Jersey Ave, SE\nWashington, D.C. 20590\nAPR 14 2010\nMr. Matjaz Zakotnik\nFDSE, Inc.\n504 Hamburg TPK, BIOS\nWayne, IN 07470\nRef. No. 09-0281\nDear Mr. Zakotnik:\nThis responds to your November 19,2009 request for information on the import of liquefied\npetroleum gas cylinders manufactured to European standards and intended for automotive\nuse. Please accept my apology for our delay in responding and any inconvenience it may\nhave caused.\nCylinders intended for installation in automobiles corne under the jurisdiction ofthe\nDepartment of Transportation's National Highway Traffic Safety Administration (NHTSA).\nYou should contact the Office ofthe Associate Administrator for Rulemaking in NHTSA at\n202-366-1810 for information on certifying cylinders for use in automobiles.\nI hope this answers your inquiry. Ifyou need additional assistance, please contact this\nOffice.\nCharles E. Betts\nhief Standards Development\nOffice of Hazardous Materials Standards\n\n<<<PAGE 2>>>\n\nDrakeford, Carolyn (PHMSA)\nFrom: Lawson, Eleanor (PHMSA) f>ooffleSent:\nTuesday, November 24,20098:16 AM\nTo: Drakeford, Carolyn (PHMSA)\nSubject: FW: Approvals Feedback: Other Questions?\n~ 11 t·z:Z\n~ I'll .\"23\nSl13¥2ZQ\n-----Original Message----Sent: Thursday, November 19, 2009 3:45 PM From:\nPHMSA-Feedback [mailto:PHMSA-Feedback]\nTo: Approvals (PHMSA); PHMSA Webmaster\nSubject: Approvals Feedback: Other Questions?\nOq .. O*h.~ I\nDear Sirs\nWe are planning the import of LPG tanks for automotive use. They are made in Europe and\nthey meet European standards Advise where we can get US standardization of these products\nand how anto apply\nMat Zakotnik\n~Pfll~;\"'t:J\nMatjaz Zakotnik\nCompany: FDSE Inc\nAddress: 504 Hamburg TPK, B105\nCity: Wayne\nCode: 07470\nPhone: 9737907575\nEmail: matzak@optonline.net\n1","truncated":false,"body_characters":1873}