{"operation":"document","citation":"10-0128","title":"Aleris International, Inc — Hazardous Materials Safety Interpretation","source_type":"guidance","agency":"Pipeline and Hazardous Materials Safety Administration","status":"guidance","official":true,"published_on":"2010-08-11","effective_on":null,"summary":"10-0128 response to Aleris International, Inc concerning 172.102, 173.241, 173.242.","machine_formats":{"json":"https://regulus.evalyn.ai/document/phmsa-interpretation-10-0128.json","markdown":"https://regulus.evalyn.ai/document/phmsa-interpretation-10-0128.md"},"app_url":"https://regulus.evalyn.ai/document/phmsa-interpretation-10-0128","source_url":"https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretations/2010/100128.pdf","body":"<<<PAGE 1>>>\n\nU.S. Department of Transportation Pipeline and Hazardous Materials\nSafety Administration\nAUG 11 2010\n1200 New Jersey Ave, SE\nWashington. D.C. 20590\nMr. Kenneth J. Willings\nSenior Vice President, Health, Safety and Environmental\nAleris International, Inc. .\n25825 Science Par Drive, Suite 400\nBeachwood, Ohio 44122-7392\nRef. No. 10-0128\nDear Mr. Willings:\nThis responds to your request for clarification ofthe Hazardous Materials Regulations (HMR; 49\nCFR Parts 171-180). Specifically, you ask for clarification on the applicability of § 172.102 special\nprovisions when transporting \"Aluminum smelting by-products or Aluminum re-melting byproducts,\n4.3, UN3170.\"\nIn your letter, you state that these materials are transported off-site using bulk packagings such as,\nrail cars, highway trailers or roll-off bins, in accordance with bulk packaging Special provision\nB115. You further state that some of this material is loaded into intermediate bulk containers\n(IBCs) that comply with Special provisions IP4, IB8, and §§ 173.241 and 173.242. You ask\nwhether the IBC must also comply with Special provisions IP4, IB8, and §§ 173.241 and 173.242\nwhen the IBC is placed into an outer container that complies with bulk packaging Special provision\nB115.\nThe answer is yes. The shipment must comply with Special provision B 115, as well as Special\nprovisions IP4, IB8, and §§ 173.241 and 173.242.\nI hope this answers your inquiry. If you need additional assistance, please contact this Office at\n202-366-8553.\n Si:t_..........\nCharles E. Betts\nChief, Standards Development\nof Hazardous Materials Standards\n\n<<<PAGE 2>>>\n\nKenneth J. Willings\nSenior Vice President, Health, Safety and Environmental\nTelephone: 216.910,3507\nFacsimile: 216.910.3652\nCell Phone: 216.233.8320\nEmail: ken.willingS@alelis.com International, Inc.\nJune 4, 2010\nMr. Edward T. Mazullo\nDirector, Office of Hazardous Materials Standards\nu.s. DOTIPHMSA (PHH-IO)\n1200 New Jersey Avenue, SE East Building, 2nd Floor\nWashington, DC 20590\nRe: Clarification of 49 CFR Part 172.102 (BI15), (IP4), (mS) and 49 CFR Parts 173.241 and 173.242\nDear Mr. MazuBo:\nAleris International, Inc. (\"Aleris\") has some facilities that generate \"Aluminum Smelting By-Products or\nAluminum Remelting By-Products\" that have a 4.3 hazard classification and a UN3170 identification\nnumber. These materials are transported off-site using rail cars, highway trailers or roll-off bins that meet\nu.s. DOT requirements for this material, including those specified in 49 CFR Part 172.102 (B 115).\nSome of this material is placed in intermediate bulk containers (\"mC's\") that meet the requirements of 49\nCFR Part 172.102 (IP4), (mS) and 49 CFR Part 173.241 or Part 173.242, depending on the degree of\nhazard and packaging group requirements.\nAleris requests a clarification regarding these requirements. The specific issue that we request clarification\nis as follows:\nIf the material indicated is placed in an mc and then placed in a container for shipment\nthat meets the requirements of 49 CFR 172.102 (B115), must the mc also meet U.S.\nDOT requirements, as indicated in 49 CFR Part 172.102 (IP4), (mS) and 49 CFR Part\n173.241 or Part 173.242?\nIf you have questions regarding this request, please contact me at the following telephone number:\n216.910.3507 or email address:ken.willings@aleris.com. I can also be reached at the address indicated on\nthis letterhead.\nThank you for your consideration ofthis matter.\nSincerely,\nK ---71{; tV~/\nKenneth J. wat'ingS 0\ncc: Jim Buckert, Aleris\njlf","truncated":false,"body_characters":3526}