# URS Corporation — Hazardous Materials Safety Interpretation - **operation:** document - **citation:** 10-0238 - **title:** URS Corporation — Hazardous Materials Safety Interpretation - **source type:** guidance - **agency:** Pipeline and Hazardous Materials Safety Administration - **status:** guidance - **official:** true - **published on:** 2010-12-09 - **effective on:** Not available - **summary:** 10-0238 response to URS Corporation concerning 172.101, 172.102. - **machine formats:** - **json:** https://regulus.evalyn.ai/document/phmsa-interpretation-10-0238.json - **markdown:** https://regulus.evalyn.ai/document/phmsa-interpretation-10-0238.md - **app url:** https://regulus.evalyn.ai/document/phmsa-interpretation-10-0238 - **source url:** https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretations/2010/100238.pdf **body:** <<>> iJ.S. Departmenr ot Transportation I 200 New Jersey Ave. SE ;:Jipeline and Hazardous Materials 'Nashington. D.C. 20590 Safety Administration OEC '9 LGiG Ms. Erin Jarman URS Corporation 1600 Perimeter Park Drive, Suite 400 Morrisville, NC 27560 Ref. No. 10-0238 Dear Ms. Jarman: This responds to your November 2, 20 I 0 letter regarding the transportation of hazardous waste under the Hazardous Materials Regulations (HMR; 49 CFR Parts 171-1S0). Specifically, you request clarification of the appropriate hazardous material description for hazardous waste that contains constituents that are also hazardous materials. Your questions are paraphrased and answered as follows: Q1. A bulk bin of solid hazardous waste material meeting the EPA toxicity waste characteristic (Le., D008) due to the presence oflead also contains friable asbestos (Le., a material included among the list of hazardous substances) in an amount less than the reportable quantity. The asbestos is not an EPA hazardous waste. Must the basic description ofthe hazardous material account for the friable asbestos? At. Yes, the shipper of this material must account for the asbestos. Asbestos in friable form is listed in the § 172.101 Hazardous Materials Table (HMT) as a material that presents a hazard during transportation. Therefore, based on the information provided, either "UN3082, Hazardous waste, solid, n.o.s., (DOOS), 9, PG III, (contains asbestos)" or "UN3082, Waste environmentally hazardous substance, solid, n.o.s., (DOOS, asbestos), 9, PG III" are examples of descriptions that could be used for the material. Q2. Whatwould be. the correct basic description if the solid hazardous waste (Le., DOOS) material contained lead and friable asbestos in reportable quantities? Both lead and asbestos are listed as hazardous substances in Table 1 to Appendix A of the § 172.101 HMT? A2. The shipper must still account for the asbestos. Based on the information provided, "UN3082, Hazardous waste, solid, n.O.s., (DOOS), 9, PG III, RQ (lead, asbestos)" or "UN30S2, Waste environmentally hazardous substance, solid, n.o.s., (D008), 9, PG III, RQ (lead, asbestos)" are examples of descriptions that could be used for the material. Special provision 8 limits use ofthe proper shipping name "Other regulated substances, n.o.s," to hazardous substances that are not also hazardous wastes, therefore, because the asbestos is not a hazardous <<>> waste even though it is contained in the solid hazardous waste material. "Other regulated substances, n.o.s." is not an appropriate shipping description. St:e § 172.1 02( c)( 1). I hope this information is helpful. If you have further questions, please contact this office. Ben Supko Acting Chief, Standards Development Standards and Rulemaking Division <<>> D.er J!.Jncleren ~ r72- /01 ~n I · ~ APpllccJo.' ll!r Ib-023g November 2, 20 I 0 Mr. Charles E. Betts Director, Office of Hazardous Materials Standards U.S. DOT/PHMSA (PHH-IO) 1200 New Jersey Avenue, SE East Building, 2nd Floor Washington, DC 20590 Dear Mr. Betts: I am writing to you with regards to the correct basic description for a hazardous waste solid that contains other constituents that are hazardous materials, but that are not considered hazardous waste. Due to varying approaches used by waste vendors to describe these types ofmaterials, we are seeking your assistance. My questions are as follows: 1) A bulk bin of a hazardous waste solid material is characteristic of toxicity (0008) due to the presence of low levels of Lead. In addition, the same waste material contains friable asbestos (a hazardous substance, but non-hazardous waste) in an amount less than the reportable quantity. Do we need to account for the friable asbestos that is mixed in with the hazardous waste? What would be the correct basic description for this waste mixture? 2) A bulk bin of a hazardous waste solid material is characteristic of toxicity (0008) due to the presence of low levels of Lead. The Lead is present in a reportable quantity amount. In addition, the waste contains a reportable quantity amount of friable asbestos (a hazardous substance, but non-hazardous waste). What would be the correct basic description for this waste mixture? Thank you in advance for your assistance. I look forward to your response. Sincerely, L"'Lr~ Erin N. Jarman Environmental Scientist URS Corporation 1600 Perimeter Park Drive, Suite 400 Morrisville, NC 27560 Tel: 919-461-1478 Erin _Jarman@urscorp.com - **truncated:** false - **body characters:** 4500