# Eastex Crude Company — Hazardous Materials Safety Interpretation

- **operation:** document
- **citation:** 13-0108
- **title:** Eastex Crude Company — Hazardous Materials Safety Interpretation
- **source type:** guidance
- **agency:** Pipeline and Hazardous Materials Safety Administration
- **status:** guidance
- **official:** true
- **published on:** 2013-07-18
- **effective on:** Not available
- **summary:** 13-0108 response to Eastex Crude Company concerning 172.542, 172.704, 177.800.
- **machine formats:** - **json:** https://regulus.evalyn.ai/document/phmsa-interpretation-13-0108.json
- **markdown:** https://regulus.evalyn.ai/document/phmsa-interpretation-13-0108.md
- **app url:** https://regulus.evalyn.ai/document/phmsa-interpretation-13-0108
- **source url:** https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/legacy/interpretations/Interpretation%20Files/2013/130108.pdf
**body:**

<<<PAGE 1>>>

U.S. Department of Transportation
Pipeline and Hazardous Materials
Safety Administration
1200 New Jersey Ave, S.E.
Washington, D.C. 20590
JUL 1 8 ZOll
Ms. Kathy Harris
Safety Director
Eastex Crude Company
10907 Ste Hwy 11 W
Leesburg, TX 75451
Ref. No.: 13-0108
Dear Ms. Harris:
This is in response to your letter requesting clarification of certain requirements under the
Hazardous Materials Regulations (HMR; 49 CFR Part 171-180) applicable to the highway
transportation of "High Gravity Condensate," in a cargo tank, classified as either "UN1267,
Petroleum Crude Oil, Class 3, Packing Group IIII" or "UN1268, Petroleum Products, n.o.s
(condensate), Class 3, Packing Group I/II." Your questions are paraphrased and answered
below:
Ql. What are the requirements to transport "High Gravity Condensate" in a cargo tank in
TX, LA, OK, and NM?
Al. The HMR apply to any person that transports or causes to be transported or shipped
hazardous materials in interstate, intrastate, and foreign commerce, by all modes of
transportation (i.e., highway, rail, air, and vessel). The HMR include requirements for
packaging, marking, labeling, shipping paper documentation, emergency response
information, placarding, and training.
Q2. What placard is required for "High Gravity Consendate"?
A2. A cargo tank containing a class 3, packing group I or II material, must display a
FLAMMABLE placard as described in § 172.542. In addition, bulk packagings (e.g., cargo
tanks) must display identification numbers on the placard in accordance with
§ 172.332(c) or on orange panels in accordance with§ 172.332(b).
Q3. What are the driver training requirements to transport "High Gravity Condensate"?
A3. The HMR require that the driver must receive hazardous materials training (see
§§ 177.800(c) and 177.816). This training must include general awareness, function-
specific, safety, and security awareness training as specified in § 172. 704( a) of the HMR, as
well as driver training in the applicable requirements of Federal Motor Carrier Safety

<<<PAGE 2>>>

Regulations (FMCSR; 49 CFR parts 390 through 397) and the procedures necessary for the
safe operation of that motor vehicle. Training conducted to satisfy compliance with the
current Federal Motor Carrier Safety Administration (FMCSA) requirements for a
Commercial Driver's License (CDL) with a tank vehicle or hazardous materials
endorsement may be used to satisfy the training requirements set forth in§ 172.704 to the
extent that such training addresses the training components specified in§ 172.704(a).
Where this training does not satisfy the HMR, the employer or self-employed person
performing these tasks must provide additional training that satisfies these requirements (see
§ 177.816(c) and (d)). In addition, CDLs and hazardous materials endorsements are
regulated by FMCSA in accordance with 49 CFR Part 383. Questions regarding FMCSA
regulations should be directed to the appropriate FMCSA field office. A list of FMCSA
field offices and contact information is available at
"http://www.fmcsa.dot.gov/about/contact/offices /displayfieldroster.aspx," or you may
contact FMCSA at their headquarters offices in Washington, D.C., at (202) 366-6121.
I hope this information is helpful. If you have further questions, please do not hesitate to
contact this office.
Sincere! ,
{) L Delmer Billings
),.V Senior Regulatory Advisor
Standards and Rulemaking Division

<<<PAGE 3>>>

Drakeford, Carol n PHMSA)
From:
Sent:
To:
Subject:
Twitty, Gail (PHMSA)
Tuesday, May 21,2013 3:02PM
Drakeford, Carolyn (PHMSA)
FW: Question
From: Kathy Harris [mailto:kathy.harris@eastexcrude.com]
Sent: Tuesday, May 21, 2013 2:43 PM
To: Twitty, Gail (PHMSA)
Subject: Question
Ms. Gail,
I'm not sure if you can help me but hopefully you can point me in the right direction to get answers.
1) What are the requirements to haul High Gravity Condensate in a pressurized trailer in TX, LA, OK
andNM?
2) What placard is for High Gravity Condensate?
3) Do Driver's have to complete a special class/have training to haul High Gravity Condensate in? If
so, what is the name of the class and where are the classes located?
Thank you in advance for any help you can give me!
Kathy Harris
Safety Director
Eastex Crude Company
1 0907 State Hwy 11 W
Leesburg, TX 75451
Office: 903-856-2401 x 163
Cell: 903-285-2140
Fax: 903-856-5228
Email: kathy.harris@eastexcrude.com
1
- **truncated:** false
- **body characters:** 4398
