# Coty Riverside Distribution Center — Hazardous Materials Safety Interpretation

- **operation:** document
- **citation:** 22-0072
- **title:** Coty Riverside Distribution Center — Hazardous Materials Safety Interpretation
- **source type:** guidance
- **agency:** Pipeline and Hazardous Materials Safety Administration
- **status:** guidance
- **official:** true
- **published on:** 2023-01-19
- **effective on:** Not available
- **summary:** 22-0072 response to Coty Riverside Distribution Center concerning 172.315.
- **machine formats:** - **json:** https://regulus.evalyn.ai/document/phmsa-interpretation-22-0072.json
- **markdown:** https://regulus.evalyn.ai/document/phmsa-interpretation-22-0072.md
- **app url:** https://regulus.evalyn.ai/document/phmsa-interpretation-22-0072
- **source url:** https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/docs/standards-rulemaking/hazmat/interpretations/77136/220072.pdf
**body:**

<<<PAGE 1>>>

U.S. Department
of Transportation
Pipeline and Hazardous
Materials Safety
Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
January 19, 2023
Ms. Janice Hayes
Logistics Customer Service Manager
Coty Riverside Distribution Center
4608 Appliance Drive
Belcamp, MD 21017
Reference No. 22-0072
Dear Ms. Hayes:
This letter is in response to your June 28, 2022, letter requesting clarification of the Hazardous
Materials Regulations (HMR; 49 CFR Parts 171-180) applicable to labeling shipments of limited
quantities. In your letter, you provided pictures of a limited quantity package that has the limited
quantity marking reproduced on multiple sides of the package. You note that in some instances,
one of the limited quantity markings may be covered by a shipping label; however, the remaining
limited quantity markings remain visible on the package. You ask whether this situation is
permissible, i.e., to possibly cover up one of the limited quantity markings on the package,
provided at least one other limited quantity marking is visible on the package.
Based on the description and photographs provided in your letter, the answer is yes. Section
172.315(a)(2) states that the limited quantity square-on-point marking “must be durable, legible,
and of a size relative to the packaging, readily visible, and must be applied on at least one side or
one end of the outer packaging.” The HMR do not prohibit the placing of multiple limited
quantity markings on a package, such as depicted in your photographs, provided the applicable
requirements in § 172.315 are met. However, it is the opinion of this Office that a partially-
obscured limited quantity marking—as pictured in your incoming letter—should be covered to
avoid frustration of your shipment during transportation.
I hope this information is helpful. Please contact us if we can be of further assistance.
Sincerely,
T. Glenn Foster
Chief, Regulatory Review and Reinvention Branch
Standards and Rulemaking Division

<<<PAGE 2>>>

From: INFOCNTR (PHMSA)
To: Dodd, Alice (PHMSA)
Cc: Hazmat Interps
Subject: FW: COTY Correspondence
Date: Friday, July 22, 2022 1:51:54 PM
Attachments: EO - Approv(COTY) 12Jul22.pdf
image002.png
image004.png
Hi Alice,
Please see the attached LOI request.
Let me know if you need anything from us.
Regards,
-Breanna
From: Nicks, Michael (PHMSA) <michael.nicks@dot.gov>
Sent: Tuesday, July 12, 2022 11:06 AM
To: INFOCNTR (PHMSA) <INFOCNTR.INFOCNTR@dot.gov>
Subject: FW: COTY Correspondence
FYA.
Michael Nicks
Transportation Specialist, Office of Hazardous Materials Safety
US Department of Transportation
Pipeline and Hazardous Materials Safety Administration
1200 New Jersey Ave., Washington D.C. 20590
Office: 202-366-5610
PHMSA Home | LinkedIn | Twitter | HAZMAT | OPS
From: Approvals (PHMSA) <Approvals@dot.gov>
Sent: Tuesday, July 12, 2022 11:02 AM
To: Nicks, Michael (PHMSA) <michael.nicks@dot.gov>
Subject: FW: COTY Correspondence
Duane M. Cassidy
Chief, Pressure Vessels Branch (PHH-25)

<<<PAGE 3>>>

Sciences and Engineering Division
Office of Hazardous Materials Safety
US Department of Transportation
Pipeline and Hazardous Materials Safety Administration
E21-301, 1200 New Jersey Ave SE, Washington, DC 20590
Office: 202.366.5794 ◊ Mobile: 202.596.0583
PHMSA Home | LinkedIn | Twitter | HAZMAT | OPS
From: Lisak, Frank (PHMSA) <frank.lisak@dot.gov>
Sent: Tuesday, July 12, 2022 10:32 AM
To: Approvals (PHMSA) <Approvals@dot.gov>
Subject: COTY Correspondence
Good Morning, Gentlemen:
The attachment is for your review.
Frank
- **truncated:** false
- **body characters:** 3548
