{"operation":"document","citation":"23-0008","title":"Leschaco, Inc. — Hazardous Materials Safety Interpretation","source_type":"guidance","agency":"Pipeline and Hazardous Materials Safety Administration","status":"guidance","official":true,"published_on":"2023-11-14","effective_on":null,"summary":"23-0008 response to Leschaco, Inc. concerning 172.101, 172.203.","machine_formats":{"json":"https://regulus.evalyn.ai/document/phmsa-interpretation-23-0008.json","markdown":"https://regulus.evalyn.ai/document/phmsa-interpretation-23-0008.md"},"app_url":"https://regulus.evalyn.ai/document/phmsa-interpretation-23-0008","source_url":"https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/docs/standards-rulemaking/hazmat/interpretations/78011/230008.pdf","body":"<<>>\n\nU.S. Department\nof Transportation\nPipeline and Hazardous\nMaterials Safety\nAdministration\n1200 New Jersey Avenue, SE\nWashington, DC 20590\nNovember 14, 2023\nMr. Hien Le\nManager – Hazmat and Compliance\nLeschaco, Inc.\n15355 Vantage Parkway West, Suite 240\nHouston, TX 77032\nReference No. 23-0008\nDear Mr. Le:\nThis letter is in response to your January 30, 2023, email concerning the use of a technical name\nas part of a proper shipping name under the Hazardous Materials Regulations (HMR; 49 CFR\nParts 171-180). Specifically, your email pertains to the shipment of dimethyl phthalate as\n“UN3082, Environmentally hazardous substance, liquid, n.o.s., 9, III.” In your email, you note\nthat the safety data sheet (SDS) for this material states the technical name is “dimethyl phthalate,”\nwhile also listing multiple synonyms, including “1,2-benzenedicarboxylic acid, dimethyl\nester.” You add that both “dimethyl phthalate” and “1,2-benzenedicarboxylic acid, dimethyl\nester” are listed in the hazardous substances table in Appendix A to § 172.101 - List of Hazardous\nSubstances and Reportable Quantities with a reportable quantity (RQ) of 5,000 pounds. You ask\nwhether it is permissible to use a synonym or alternate name listed in an SDS as the technical\nname for a material if the synonym is listed in Appendix A to § 172.101. Additionally, you ask if\nthe synonym is not listed in Appendix A of § 172.101 but is included as another name under the\nChemical Abstracts Service (CAS) record, whether it is permissible to use that synonym as the\ntechnical name for a hazardous substance in the basic shipping description.\nAs stated in § 172.203(c) of the HMR, the name of the hazardous substance must be entered in\nparentheses in association with the basic description when the proper shipping name for a\nmaterial does not identify the hazardous substance by name. Both “dimethyl phthalate” and\n“1,2-benzenedicarboxylic acid, dimethyl ester” are listed as hazardous substances in Appendix A\nto § 172.101 and they are synonyms of the same chemical. As such, it is the opinion of this\nOffice that the proper shipping name could appear as either “UN3082, Environmentally\nhazardous substance, liquid, n.o.s., 9, III (Dimethyl phthalate)” or “UN3082, Environmentally\nhazardous substance, liquid, n.o.s., 9, III (1,2-Benzenedicarboxylic acid, dimethyl ester).”\n\n<<>>\n\nLastly, § 172.203(c) requires that the name of the hazardous substance listed in Appendix A to\n§ 172.101 appear as the technical name in the basic shipping description if the proper shipping\nname for a material that is a hazardous substance does not identify the hazardous substance by\nname. The HMR does not permit the use of a synonym under a CAS record that is not listed in\nAppendix A to § 172.101 to describe a hazardous substance on shipping papers.\nI hope this information is helpful. Please contact us if we can be of further assistance.\nSincerely,\nT. Glenn Foster\nChief, Regulatory Review and Reinvention Branch\nStandards and Rulemaking Division\n\n<<>>\n\nAndrews\n23-0008\nFrom: INFOCNTR (PHMSA)\nTo: Hazmat Interps\nSubject: FW: Interpretation Seeking on Technical Name Synonym\nDate: Tuesday, January 31, 2023 3:47:53 PM\nAttachments: image001.png\nimage002.png\nimage003.png\nimage004.png\nimage005.png\nimage006.png\nimage007.png\nimage008.png\nDMP DGD.pdf\nDMP SDS.pdf\nPlease see below and attached request for interpretation.\nThanks,\nJonathon, HMIC\nFrom: Le, Hien \nSent: Monday, January 30, 2023 5:35 PM\nTo: INFOCNTR (PHMSA) \nCc: Le, Hien \nSubject: Interpretation Seeking on Technical Name Synonym\nCAUTION: This email originated from outside of the Department of Transportation (DOT). Do not click on links or open attachments unless you\nrecognize the sender and know the content is safe.\nDear PHMSA,\nI am writing this email seeking interpretation on 49 CFR 172.203(k). technical name(s) in parenthesis on the shipping documents after PSN with “n.o.s.”\nThis part generally outlines the requirement of listing the\nIn addition, this part directs reader to 49 CFR 171.8 for additional technical name options.\nThis email lays out a specific situation for UN3082. Section 14 of the attached safety data sheet (SDS) states the technical name for\nthis product (DMP) as “Dimethyl Phtalate.” However, in section 1 of the same SDS, the manufacturer lists other names under\n“Synonyms.” Screen shots of section 1 and 14 are as follows.\n14. TRANSPORT INFORMATION\nDescription of waste residues and information on their safe handling and methods of disposal:\nUN number 3082\nUN roper shi ping name Environmentally hazardous substances, liquid, n.o.s. (Dimethyl phthalate\n1. IDENTIFICATION OF SUBSTANCE/ MIXTURE AND OF SUPPLIER\nProduct Identifier:\nHigh Purity Chemicals\nSynonyms:\n1,2-Benzenedicarboxylic Acid, Dimethyl Ester; D.M.P. ; Phthalic Acid,\nDimethyl Ester; dimethyl benzeneorthodicarboxylate; Methyl Phthalate\nOther means of identification:\nCAS No. 131-11-3\nEINECS No. 205-011-6\nRecommended use of the chemical and restrictions on use:\nCommonly used as a plasticizer.\nThe shipper has used one of the synonyms listed in section 1 as technical name for their shipping document (reacted copy\nattached). Further investigation of technical name definition under 49 CFR 171.8, the regulation asks not to use trade name and if\nthe substance is listed on Appendix A to Part 172.101, then the substance name must be used. In this case, both “Dimethyl\nphthalate” and “1,2-benzenedicarboxylic acid, dimethyl ester” are listed on Appendix A and have the same RQ limit (5000 lbs).\nAdditional effort to confirm if the two substance texts are the same or not is conducted using the CAS No. 131-11-3. The NIST link\n(https://webbook.nist.gov/cgi/cbook.cgi?ID=131-11-3) shows both technical name texts under the same CAS no.\n\n<<>>\n\nN•~?NAT!ONALINSTITUTEOF •\n~ 1 I srA~~,°;,~o.,re;'\"N,?LoGv NIST Chem1stryWebBook1 SRD 69\nft Search..- NISTDataT AboutT\nDimethyl phthalate\n• Formula: C10H10O4\n• Molecular weight: 194.1840\n• IU PAC Standard lnChl: lnChl =15/C10H1004/cl-13-9(11)7-5-3-4-6-8(7)10(12)14-2/ h3-6H,1-2H3 [[) ~\n\" E J!I\n• IUPACStandard lnChlKey: NIQCtJGHVCWTJSM- UHFFFAOYSA- N.0\n• CAS Registry Number: 131-11-3\n• Chemicalstructure:\nTh is structure is also available as a 2d Mol fil e or as a computed 3d SD file\nThe 3d structure may be viewe>>\n\nAARTI\nINDUSTRIES\nLIMITED\nMATERIAL SAFETY DATA SHEET\nDimethyl Phthalate (DMP)\n1. IDENTIFICATION OF SUBSTANCE/ MIXTURE AND OF SUPPLIER\nProduct Identifier:\nHigh Purity Chemicals\nSynonyms:\n1,2-Benzenedicarboxylic Acid , Dimethyl Ester; D.M.P.; Phthalic Acid ,\nDimethyl Ester; dimethyl benzeneorthodicarboxylate; Methyl Phthalate\nOther means of identification:\nCAS No. 131-11-3\nEINECS No. 205-011-6\nRecommended use of the chemical and restrictions on use:\nCommonly used as a plasticizer.\nSupplier Details:\n71 , Udyog Kshetra,\nMulund-Goregaon Link Road,\nMulund (West), Mumbai-400080,\nINDIA.\nAarti Industries Limited\n71 , Udyog Kshetra ,\nMulund-Goregaon Link Road ,\nMulund (West), Mumbai-400080, INDIA.\n2. HAZARDS IDENTIFICATION\nOSHA Hazards:\nTarget organ effect, Teratogen\nTarget Organs:\nNerves\nNFPA\nRevisim..,~~artiLRi86stfi~Q.com I CIN: Lft'i1_DG;jr198tl~7J.Qfl · . _ INDIA.\n. . . d Kshetra 2nd Floor Mulund Goregaon Link Road, Mulund (W), Mumbai 400080,\nPage 1 Agft· Office . 71, U ~0?022-67976666, F : 022-2565 3234 \\ E : info@aa_rti-industries.com .\nRegd. Office: Plot No. 801 , 801123, lllrd Phase, GIDC Vapi-396195, D1st-Valsad. lNDIA. T. 0260-2400366.\n\n<<>>\n\nAARTI\nINDUSTRIES\nLIMITED\nSignal Word:\nWARNING!\nHazard statement(s)\nH320\nH402\nPrecautionary statement(s)\nP305 + P351 + P338\nCauses eye irritation\nHarmful to aquatic life.\nIF IN EYES: Rinse cautiously with water for several minutes. Remove\ncontact lenses, if present and easy to do. Continue rinsing. Seek\nmedical attention.\nGHS Classification(s)\nAcute aquatic toxicity (Category 3)\nEye irritation (Category 2B)\nOther hazards which do not result in classification:\nPotential Health Effects:\nOrgan Description\nEyes Ingestion Inhalation Skin Can be irritating to the eyes.\nCan be harmful if ingested .\nCan be harmful, causing irritation to the respiratory tract, if inhaled.\nProduct can rapidly absorb through the skin and cause irritation.\n3. COMPOSITION AND INFORMATION ON INGREDIENTS\nChemical identity: Dimethyl Phthalate\nCommon name I Synonym:\n1,2-Benzenedicarboxylic Acid, Dimethyl Ester; D.M.P .; Phthalic Acid,\nDimethyl Ester; dimethyl benzeneorthodicarboxylate; Methyl Phthalate\nCAS number:\n131-11-3\nEINECS number: 205-011-6\nICSC number: 0261\nRTECS#: Tl1575000\nUN#: 3082\n% Weight Material CAS\n90-100 Dimethyl Phthalate 131-11-3\n4. FIRST AID MEASURES\nGeneral advice\nTake proper precautions to ensure your own health and safety before attempting rescue and providing first aid.\n~0STR1~\nC\n---••mm:aEE==l•~•!i-~~~~~=======:-::::-==~ ~ ~ ~ lJM B-AI ~ =::==============\nRevis~li'Jrti-intt\\l~t,\\~~R:om I CIN: L2~0Sil19ENBhffi~DU)__...., § . I\nAdmin. Office : 71, Udyog Kshetra, 2nd Floor, Mulund Goregaon Link Road'. ~ulun . , ..-,u a1 - 400080, INDIA.\nPage 2 of 9 T : 022~67976666, F : 022-2565 3234 I E : info@aart1 -1ndustnes.com\nRegd. Office : Plot No. 801, 801 /23, lllrd Phase, GIDC Vapi-396195, Dist- Valsad. INDIA. T : 0260-2400366.\n\n<<>>\n\nAARTI\nINDUSTRIES\nLIMITED\nConsult a physician. Show this safety data sheet to the doctor in attendance. Move out of dangerous area.\nSkin\nInhalation\nas needed.\nEyes\nIngestion\nWash skin with soap and copious amounts of water. Seek medical attention.\nRemove person to fresh air. If signs/symptoms continue, get medical attention. Give oxygen or artificial respiration\nThoroughly flush the eyes with large amounts of clean low-pressure water for at least 15 minutes, occasionally\nlifting the upper and lower eyelids. If irritation persists, seek medical attention.\nDO NOT induce vomiting . If vomiting does occur, have victim lean forward to prevent aspiration. Rinse mouth with\nwater. Seek medical attention. Never give anything by mouth to an unconscious individual.\n5. FIRE FIGHTING MEASURES\nSuitable (and unsuitable) extinguishing media:\nUse water spray, alcohol-resistant foam , dry chemical or carbon dioxide.\nSpecific hazards arising from the chemical (e.g., nature of any hazardous combustion products):\nCarbon oxides expected to be the primary hazardous combustion product.\nSpecial protective equipment and precautions for firefighters:\nWear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. Keep\nunopened containers cool by spraying with water.\nFlammable Properties\nClassification\nOSHA/NFPA Class 111B Combustible Liquid.\nFlash point\n146 °C (295 °F) - closed cup\nAutoignition temperature\n490 °C (915 °F)\n6. ACCIDENTAL RELEASE MEASURES\nPersonal precautions, protective equipment and emergency procedures:\nUse personal protective equipment. Do not inhale vapors/misUgas/dust. Ensure adequate ventilation. Evacuate\npersonnel to safe areas.\nEnvironmental precautions:\nRevision Dat~: 15d0? ?I1 1 ?Qcom I CIN· L2~00~1~P *\nwww.aa, ,1-m u-sme-s. · . A\nd i • Office : 71 , Udyog Kshetra, 2nd Floor, Mulund Goregaon Link Road '. ~ulund_ (W), Mumbai - 400080, INDI •\nPage ~ !JI ~ T : 022-67976666, F : 022-2565 3234 I E : info@aart1 -1 ndustnes.com\nRegd. Office : Plot No. 801 , 801 /23, lllrd Phase, GIDC Vapi-396195, Dist- Valsad. INDIA. T : 0260-2400366.\n\n<<>>\n\nAARTI\nINDUSTRIES\nLIMITED\nStop leak. Contain spill if possible and safe to do so. Prevent product from entering drains.\nMethods and materials for containment and cleaning up:\nAbsorb with an inert dry material and place in an appropriate waste disposal container. Keep disposal containers\nclosed when finished .\n7. HANDLING AND STORAGE\nPrecautions for safe handling:\nDo not get on skin or in eyes. Do not inhale vapor or mist. Take normal fire prevention measures.\nConditions for safe storage, including any incompatibilites:\nContainer must be sealed tightly and kept in a dry, well-ventilated space.\n8. EXPOSURE CONTROLS I PERSONAL PROTECTION\nControl parameters, e.g., occupational exposure limit values or biological limit values:\nOccupational Exposure Limits\nComponent Source Type Value Note\nDimethyl Phthalate US (OSHA TWA 5 mg/m3 29 CFR 1910.1000 Table Z-1 Limits for Air Contaminants\nAppropriate engineering controls:\nGeneral room or local exhaust ventilation is usually required to meet exposure limit(s). Electrical equipment should\nbe grounded and conform to applicable electrical code.\nIndividual protection measures, such as personal protective equipment:\nRespiratory protection:\nWhere risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose\ncombination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the\nrespirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components\ntested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).\nHand protection:\nHandle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching\nglove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in\naccordance with applicable laws and good laboratory practices. Wash and dry hands.\nEye protection:\nUse chemical safety goggles and/or a full face shield where splashing is possible. Use equipment approved by\nappropriate government standards, such as NIOSH (US) or EN166 (EU) Maintain eye wash fountain and\nquick-drench facilities in work area.\nSkin and body protection:\nRevis~ lJJ~.§tlri:i.JiriJt?s~com I CIN: L2'f~~MRbC *\nAdmin. Office : 71, Udyog Kshetra, 2nd Floor, Mulund Goregaon ~ink Road'. ~ulun~ (W), ai - 400080, INDIA.\nPage 4 of 9 T : 022-67976666, F : 022-2565 3234 I E : info@aart1-industnes.com\nRegd. Office: Plot No. 801, 801/23, lllrd Phase, GIDC Vapi-396195, Dist- Valsad. INDIA. T: 0260-2400366.\n\n<<>>\n\nAARTI\nINDUSTRIES\nLIMITED\nWear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to\nprevent skin contact.\nHygiene measures:\nof workday.\nHandle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end\n9. PHYSICAL AND CHEMICAL PROPERTIES\nAppearance (physical state, color, etc.) Liquid. Colorless, clear.\nOdor Specific data not available\nOdor threshold Specific data not available\npH Specific data not available\nFreezing point 2 °C (36 °F)\nInitial boiling point and boiling range 282 °C (540 °F)\nFlash point 146 °C (295 °F) - closed cup\nEvaporation rate Specific data not available\nFlammability (solid, gas) Specific data not available\nUpper/ Lower flammability or explosive limits 8.0% (V) / 0.9% (V)\nVapor pressure 0.0020 hPa (0.0015 mmHg) at 20.0 °C (68.0 °F)\nVapor Density 6.69\nRelative Density 1.19 g/ml at 25 °C (77 °F)\nSolubility(ies) slightly soluble\nPartition coefficient n-octanol/water(ies) log Pow: 1.5\nAuto-ignition temperature 490 °C (915 °F)\nDecomposition temperature Specific data not available\nFormula (DIMETHYL PHTHALATE) C10H10O4\nMolecular Weight (DIMETHYL PHTHALATE) 194.18 g/mol\n10. STABILITY AND REACTIVITY\nChemical Stability Stable under recommended storage conditions.\nPossibility of hazardous reactions No data available\nConditions to avoid (e.g., static discharge, shock or No data available\nvibration)\nIncompatible materials Acids, oxidizing agents\nHazardous decomposition products Carbon oxides are expected to be, under fire conditions,\nthe primary hazardous decomposition products.\n11. TOXICOLOGICAL INFORMATION\n• Dimethyl Phthalate 131-11-3\nReviS~\\1Jv21.tni-rRd~itft~iQ;om I CIN: L2~'0CliA81t4PllCOO'Z30fJ .\nAdmin. Office : 71, Udyog Kshetra, 2nd Floor, Mulund Goregaon Link Road'. ~ulund_ (W), Mumbai - 400080, INDIA.\nPage 5 of 9 T : 022-67976666, F : 022-2565 3234 I E : info@aart1 -1ndustnes.com\nRegd. Office : Plot No. 801, 801 /23, lllrd Phase, GIDC Vapi-396195, Dist- Valsad. INDIA. T : 0260-2400366.\n\n<<>>\n\nAARTI\nINDUSTRIES\nLIMITED\nProduct Summary:\nLaboratory test results indicate that the product has reproductive and teratogenic effects. No data available for the\nmutagenic effects of the product. No data available to designate product as an aspiration hazard or to cause\nspecific target organ toxicity through single or repeated exposure.\nAcute Toxicity:\nLD50 Dermal)\nLD50 (Oral\nRabbit\nRat\nIrritation:\nEyes\nRabbit - mild eye irritation\nRespiratory or Skin Sensitization\nNo data available\nSkin\nNo data available\nReproductive Toxicity\nReproductive disorder(s) have been displayed in laboratory animals overexposed to the material.\nTeratogenicity\nMay cause congenital malformation in the fetus.\nCarcinogenicity\nIARC: No component of this product present at levels greater than or equal to 0.1 % is identified as probable or\nconfirmed human carcinogen by IARC.\nACGIH : No component of this product present at levels greater than or equal to 0.1 % is identified as a carcinogen\nor potential carcinogen by ACGIH.\nNTP: No component of this product present at levels greater than or equal to 0.1 % is identified as a known or\nanticipated carcinogen by NTP.\nOSHA: No component of this product present at levels greater than or equal to 0.1 % is identified as a carcinogen\nor potential carcinogen by OSHA.\nOther Hazards\nOrgan Description\nEyes Ingestion Inhalation Skin May be irritating to the eyes.\nMay be harmful if ingested.\nMay be harmful if inhaled. May be irritating to the respiratory tract.\nMay be harmful if absorbed through skin. May be irritatinq to the skin.\n\n<<>>\n\nAARTI\nINDUSTRIES\nLIMITED\n12. ECOLOGICAL INFORMATION\n• Dimethyl Phthalate 131-11-3\nEcotoxicity (aquatic and terrestrial, where available):\nAcute Fish Toxicity (DIMETHYL PHTHALATE)\nLC50 / 96 hours Fathead Minnow - 121 mg/L\nAcute Fish Toxicity (DIMETHYL PHTHALATE)\nLC50 / 96 hours Bluegill - 50 mg/L\nToxicity to Daphnia (DIMETHYL PHTHALATE)\nEC50 / 48 hours Water flea - 46 mg/L\nPersistence and degradability:\nNo data available\nBioaccumulative potential:\nBioaccumulation: Lepomis macrochirus (Bluegill) - 21 d Bioconcentration factor (BCF): 57\nOther adverse effects:\nProduct is harmful to aquatic life and can be considered an environmental hazard if improperly handled or through\nimproper disposal.\n13. DISPOSAL CONSIDERATIONS\nDescription of waste residues and information on their safe handling and methods of disposal, including the\ndisposal of any contaminated packaging:\nObserve all federal , state, and local environmental regulations. Contact a licensed professional waste disposal\nservice to dispose of this material. Dissolve or mix the material with a combustible solvent and burn in a chemical\nincinerator equipped with an afterburner and scrubber.\n14. TRANSPORT INFORMATION\nDescription of waste residues and information on their safe handling and methods of disposal:\nUN number 3082\nUN proper shipping name Environmentally hazardous substances, liquid, n.o.s. (Dimethyl phthalate)\nTransport hazard class es 9\nPackin roup if applicable Ill\nPage 7 of g RevisiWw~~ru1Rt8~~.com I CIN: L~ t00dlll9!il~7J~ *\nAdmin. Office : 71, Udyog Kshetra, 2nd Floor, Mulund Goregaon ~ink Road'. ~ulund_ (W), umbai -\nT : 022-67976666, F : 022-2565 3234 \\ E : info@aart1-1ndustnes.com .\nRegd. Office : Plot No. S01, 801 /23, lllrd Phase, GIDC Vapi-396195, Dist- Valsad. INDIA. T . 0260-2400366.\n\n<<>>\n\nAARTI\nINDUSTRIES\nLIMITED\nReportable Quantity\n5,000 lbs\nIMDG\nUN-Number: Not a dangerous good.\nMarine pollutant: No\nIATA\nUN-Number: Not a dangerous good.\n15. REGULATORY INFORMATION\nSafety, health and environmental regulations specific for the product in question:\nOSHA Hazards\nTarget organ effect, Teratogen\nAll ingredients are on the following inventories or are exempted from listing\nCountry Notification\nAustralia AICS\nCanada DSL\nChina IECS\nEuropean Union EINECS\nJapan ENCS/ISHL\nKorea EGL\nNew Zealand NZloC\nPhilippines PIGGS\nUnited States of America TSCA\nSARA 302 Components\nSARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title Ill, Section 302.\nSARA 313 Components\nThe following components are subject to reporting levels established by SARA Title 111, Section 313: DIMETHYL\nPHTHALA TE GAS-No. 131-11-3 Revision Date 2007-07-01\nSARA 311/312 Hazards\nChronic Health Hazard\nCERCLA\nDimethyl phthalate GAS-No. 131-11-3, RQ: 5,000 lbs\nMassachusetts Right To Know Components\nDimethyl phthalate CAS-No. 131-11 -3 Revision Date 2007-07-01\nPage 8 of 9 Revisi&Q,5Ji\\ftilt?n!i\\1st/r~com I CIN: L:iRcttbaO te!Mffh608:73(U . IA\nAdmin. Office : 71, Udyog Kshetra, 2nd Floor, Mulund Goregaon ~ink Road: Mulun~ (W), Mumbai - 400080, IND .\nT : 022-67976666, F : 022-2565 3234 \\ E : 1nfo@aartHndustnes.com\nRegd. Office: Plot No. B01, 801 /23, lllrd Phase, GIDC Vapi-396195, Dist- Valsad. INDIA. T: 0260-2400366.\n\n<<>>\n\nAARTI\nINDUSTRIES\nLIMITED\nPennsylvania Right To Know Components\nDimethyl phthalate CAS-No. 131-11-3 Revision Date 2007-07-01\nNew Jersey Right To Know Components\nDimethyl phthalate CAS-No. 131-11-3 Revision Date 2007-07-01\nCalifornia Prop 65 Components\nThis product does not contain any chemicals known to State of California to cause cancer, birth defects, or any\nother reproductive harm.\n16. OTHER INFORMATION:\nINCLUDING INFORMATION ON PREPARATION AND REVISION OF THE SOS\nDisclaimer\nAARTI INDUSTRIES LIMITED believes that the information on this MSDS was obtained from reliable sources.\nHowever, the information is provided without any warranty, expressed or implied, regarding its correctness. Some\ninformation presented and conclusions drawn herein are from sources other than direct test data on the\nsubstance itself. The conditions or methods of handling, storage, use and disposal of the product are beyond our\ncontrol and may be beyond our knowledge. For this and other reasons, AARTI INDUSTRIES LIMITED does not\nassume responsibility and expressly disclaims liability for loss, damage, or expense arising out of or in any way\nconnected with handling, storage, use, or disposal of this product. If the product is used as a component in\nanother product, this MSDS information may not be applicable. Information is correct to the best of our knowledge\nat the date of the MSDS publication.\nRevision Date:. 11. 1 i;; O? ?f.l?ncom I CIN· L~•Mffl81fflb60~:73ru\nwww.aan · nausmes; · b · 400080 INDIA\nAdmin. Office : 71, Udyog Kshetra, 2nd Floor, Mulund Goregaon ~ink Road'. ~ulund_ {W), Mum at -\n, ·\nPage g of g T : 022_ 67976666, F : 022-2565 3234 I E : 1nfo@aart1-industnes.com\nRegd. Office: Plot No. 801, 801/23, lllrd Phase, GIDC Vapi-396195, Dist- Valsad. INDIA. T: 0260-2400366.\n\n<<>>\n\nh\nn\nh\nn\n-\nX\nC\na\ng\ne\nE\nd\n-\nX\nC\na\ng\ne\nE\nF\ni\nF\nd\ni\nP\nClick to BUY NOW!\no\nr\nIMO DANGEROUS GOODS DECLARATION\nP\nr-\n0 r-,.- ...-- -\nD\nt\nD\nt\nw\nm\nw\nw\nw\nw\nc\nw\nThe form meets the requirements of SOLAS 74 chapter VII ,regulation 5:MARPOL 73/78 Annex III ,regulation 4 and the IMDG\no\nClick to BUY NOW!\no\nr\nm\no\nc\n.\nt\ne\n.\n.\nr\nr\nt\ne\n.\na\nc\na\na\nr\nk\ne\nt\nw\ns\no\ncode, General Introduction, Section 9\nf\nc\nk\ne\nf\nt\nw\nr\n-\ns\no\nShipper\nReference Number(s)\nAarti Industries Limited\nr a\n71 Udyog Kshetra,2nd Floor\nLBS Marg,Mulund Goregaon Link Road, Mulund (West)\nEmergency Contact Telephone Number\nMumbai-400080\nTEL: 201-753-5407 201\nMaharashtra,India\nPhone No: +912267976666\nCarrier\nFax No : +912225653234\nEmail : info@aartigroup.com\nCIN - L24110GJ1984PLC007301\nCarriers Booking Number.\nConsignee\nBill Of Ladding No. & Date\nName/Status , Company/Organization of Signatory\nContainer Packing Certificate/Vehicle Declaration\nAARTI INDUSTRIES LIMITED\n/\nCONTAINER PACKING DECLARATION\nMR. AMIT DALVI\n~\nIt is hereby declared that the packing of the container has been\nPlace And Date\ncarried out in accordance with the General Introduction ,\nMUMBAI 15.12.2022\nIMDG code , paragraph 5.4.2.1\nSignature On Behalf Of The Packer\n/\nShips Name & Voyage No MR. AMIT DALVI\n~\nContainer Number(s) Seal NO.\n38728\nPort Of Unloading\nSAVANNAH, USA\nQty , Type & kind of\npackages\n1 ISO TANK ONLY\nDI METHYL PHTHALATE (DMP)\nPO NO\nGW/TW/NW\nLOT NO\nISO TANK NO:\nPort Of Loading\nMUNDRA, INDIA\nFinal Destination\nSAVANNAH, USA\nDescription(Proper Shipping\nI I\nGross & Net Weights\nName,Class,UN,Packing)\nCHEMICAL.\nDIMETHYL PHTHALATE\n10, MATERIAL NO. 50374 UN NO.3082,ENVIRONMENTALLY HAZARDOUS\nNT.WT . 19,500.000\nGR.WT . 23,390.000\nON AS IS BASIS\nSUBSTANCE, LIQUID,N.O.S. (1,2-BENZENEDICARBOXYLIC\nACID,DIMETHYL ESTER)9,III, CAS NO. 131-11-3 HTS# A2917.34.0150 UN\nNO:3082 CLASS EMS:9 PG:III Marine Pollutant:\nUN NO: 3082\nClass: 9\nP.G: III\nP.O NO. DT.\nSHIPPER'S DECLARATION Name/Status,Company/Organization of Signatory\nAARTI INDUSTRIES LIMITED\nIt is hereby declared that the contents of this consignment are fully AND\nPlace And Date\naccurately described above by the proper shipping name(s) , and are\nrespects in proper condition for transport according to applicable\ninternational and national government regulations.\nSignature On Behalf Of The Shipper\nMR. AMIT DALVI","truncated":false,"body_characters":26477}