# TTI Power Equipment, Inc. — Hazardous Materials Safety Interpretation

- **operation:** document
- **citation:** 25-0012
- **title:** TTI Power Equipment, Inc. — Hazardous Materials Safety Interpretation
- **source type:** guidance
- **agency:** Pipeline and Hazardous Materials Safety Administration
- **status:** guidance
- **official:** true
- **published on:** 2025-05-01
- **effective on:** Not available
- **summary:** 25-0012 response to TTI Power Equipment, Inc. concerning 171.15, 171.16, 172.101, 172.504, 173.185, 177.834.
- **machine formats:** - **json:** https://regulus.evalyn.ai/document/phmsa-interpretation-25-0012.json
- **markdown:** https://regulus.evalyn.ai/document/phmsa-interpretation-25-0012.md
- **app url:** https://regulus.evalyn.ai/document/phmsa-interpretation-25-0012
- **source url:** https://www.phmsa.dot.gov/sites/phmsa.dot.gov/files/2025-09/250012.pdf
**body:**

<<<PAGE 1>>>

U.S. Department
of Transportation
Pipeline and Hazardous
Materials Safety
Administration
May 1, 2025
1200 New Jersey Avenue, SE
Washington, DC 20590
Alyssa Forkin
Transportation Analyst
TTI Power Equipment, Inc.
100 Innovation Way
Anderson, SC 29621
Reference No. 25-0012
Dear Ms. Forkin:
This letter is in response to your February 4, 2025 email and subsequent email conversation
requesting clarification of the Hazardous Materials Regulations (HMR; 49 CFR Parts 171-180)
applicable to placarding requirements for Class 9 hazardous materials transported by highway
and rail domestically. You state that your company imports lithium ion battery-powered devices
described as “UN3481, Lithium ion batteries packed with equipment, 9” in accordance with the
International Maritime Dangerous Goods (IMDG) Code.
We have paraphrased and answered your questions as follows:
Q1. Is a freight container loaded with packages of “UN3481, Lithium ion batteries packed
with equipment, 9” required to display Class 9 placards for transportation within the
United States even though the container is placarded to satisfy the IMDG Code
requirements for vessel transportation?
A1. No. In accordance with § 172.504(f)(9), Class 9 placards are not required for domestic
transportation, including that portion of international transportation which occurs within
the United States.
Q2. Is a shipment of “UN3481, Lithium ion batteries packed with equipment, 9” that is
prepared in accordance with § 173.185(c) not considered hazardous material for
transportation via ground within the United States?
A2. No. For ground transportation, lithium batteries that comply with the requirements of
§ 173.185(c) are not subject to certain hazard communication nor training requirements of
Subparts C through H of Part 172 of the HMR, or UN performance packaging
requirements. However, they are still a hazardous material and subject to other
requirements in the HMR including incident reporting (see §§ 171.15-171.16) and safe
stowage in a motor vehicle (see § 177.834). For your reference, I have enclosed Letter of
Interpretation Reference No. 22-0017, which discusses the applicability of other relevant

<<<PAGE 2>>>

Department of Transportation requirements to Class 9 hazardous materials, including the
hazardous materials endorsement on a Commercial Driver’s License.
Additionally, please note that the Packing Group designation was removed from lithium battery
entries in the § 172.101 Hazardous Materials Table in 2015 in final rule HM-215M.1 Updating
your shipping documentation may help avoid confusion and frustration of your shipments.
I hope this information is helpful. Please contact us if we can be of further assistance.
Sincerely,
Dirk Der Kinderen
Chief, Standards Development Branch
Standards and Rulemaking Division
1 See 80 FR 1076, https://www.federalregister.gov/documents/2015/01/08/2014-30462/hazardous-materials-
harmonization-with-international-standards-rrr.

<<<PAGE 3>>>

25-0012
Patrick
Jones, Jessie Jane (PHMSA)
From: INFOCNTR (PHMSA)
Sent: Wednesday, February 5, 2025 11:22 AM
To: Dodd, Alice (PHMSA)
Cc: Hazmat Interps
Subject: FW: TTI Placard Removal Issues at OICT
Attachments: 76031740688_535.pdf; 76031740688_525.pdf; 030224.pdf; 120085.pdf
Follow Up Flag: Follow up
Flag Status: Flagged
Good morning Alice,
See the a ached interpreta on request. Let us know if you need anything else.
Best,
Aminah
From: Forkin, Alyssa <Alyssa.Forkin@ttigroupna.com>
Sent: Tuesday, February 4, 2025 10:08 AM
To: INFOCNTR (PHMSA) <INFOCNTR.INFOCNTR@dot.gov>; PHMSA Pipelinesafety <PHMSA.Pipelinesafety@dot.gov>
Cc: Watt, Jennifer <Jennifer.Watt@ttigroupna.com>; Ellison, Clay <Clay.Ellison@ttigroupna.com>
Subject: RE: TTI Placard Removal Issues at OICT
Some people who received this message don't often get email from alyssa.forkin@ttigroupna.com. Learn why this is important
CAUTION: This email originated from outside of the Department of Transportation (DOT). Do not click on links
or open attachments unless you recognize the sender and know the content is safe.
Good morning,
Please be advised we shared to two example letters of interpretation suggested to us for the Oakland International
Container Terminal. Unfortunately, they were not good enough for them and their position remains unchanged
regarding placard removal.
This email is to inform you that we are requesting a letter of interpretation specifically stating TTI material is not DG
on the road or rail and do not require placards. We understand this may take up to 8 weeks to receive. Please
forward to the appropriate party who can assist.
Please also let us know if additional information from us is needed to fulfill this request.
Thank you,
Alyssa Forkin
Transportation Analyst
TTI Power Equipment, INC
864-883-8837
1

<<<PAGE 4>>>

From: Forkin, Alyssa
Sent: Thursday, January 30, 2025 2:08 PM
To: infocntr@dot.gov; phmsa.pipelinesafety@dot.gov
Cc: Watt, Jennifer <Jennifer.Watt@ttigroupna.com>; Ellison, Clay <Clay.Ellison@ttigroupna.com>
Subject: RE: TTI Placard Removal Issues at OICT
Adding additional email for assistance.
Thank you,
Alyssa Forkin
Transportation Analyst
TTI Power Equipment, INC
864-883-8837
From: Forkin, Alyssa
Sent: Thursday, January 30, 2025 2:02 PM
To: infocntr@dot.gov
Cc: Watt, Jennifer <Jennifer.Watt@ttigroupna.com>; Ellison, Clay <Clay.Ellison@ttigroupna.com>
Subject: TTI Placard Removal Issues at OICT
Good afternoon,
We are having issues with the Oakland International Container Terminal refusing to remove the placards from our
ocean containers. According to 49CRF 173.185 (c) (1) (iv) our product is an exception on the road and rails and are
only DG on the water.
OICT is firm in their position not to remove the placards on these specific cargo/containers of ours. They require
an LOI directly from the DOT stating that this is granted and OICT specifically will not be held liable. So, from the
DOT and not the Shipper.
Please advise if we get some assistance with this as we have multiple containers that come into this port that need
placard removal before transport.
2

<<<PAGE 5>>>

Thank you,
Alyssa Forkin
Transportation Analyst
TTI Power Equipment, INC
864-883-8837
3

<<<PAGE 6>>>

DECLARATION OF DANGEROUS GOODS IN CONTAINER & CONTAINER PACKING
CERTIFICATE (FOR MULTIMODAL TRANSPORT)
This form meets the recurements of SOLAR 7.6 chapter Vii, regulation 5, MARPOL 73/78, Annex III, regualtion 4
1 Shipper/Consignor/Sender 2 Transport document number (eg: Booking No. or B/L No.)
TECHTRONIC INDUSTRIES VIETNAM MANUFACTURING
SGNEBY828400
COMPANY LIMITED
Page 1 of 2 pages 4 Shipper's reference
BLOCK M1-M5 DAU GIAY INDUSTRIAL PARK, DAU GIAY TOWN,
THONG NHAT DISTRICT, DONG NAI PROVINCE, VN
5 Freight forwarder's reference
6 Consignee 7 Carrier (to be completed by the carrier)
TTI OUTDOOR POWER EQUIPMENT INC.
100 INNOVATION WAY SHIPPER'S DECLARATION
ANDERSON, SC 29621 I hereby declare that contents of this consigment are fully and accurately
described below by the Proper Shipping Name, and are classified
7. Notify Party SAME AS CONSIGNEE package, marked and labeled/placared and are in all respects in proper
condition for transport according to the applicable international and
national government regualtions.
I undertake to hold the Carrier fully harmless and indemnify them against
any and all losses, damage, and expenses refulting from the failure to
comply with the above.
9 Additional handing information:
24hour Emergency Number
Emergency contact US: +1-800-424-9300
International Emergency: +1-703-741-5970
CNN: 14692 Chemtrec
SHIPPER EMERGENCY CONTACT:
TEL:86-13622678460 PIC: Edward
CONSIGNEE 24HRS EMERGENCY CONTACT:
TEL: +1 864-209-0505 PIC: Clay.Ellison
14 Shipping marks Number and kind of packages: Description of goods Gross mass (kg) Net mass (kg) Cube (m3)
DG Goods 252 Fiberboard box (Inner) MOWER 6375.600 5821.200 66.318
252 Fiberboard box (Outer)
UN number: UN3481
PROPER SHIPPING NAME and TECHNICAL NAME (If Required): LITHIUM ION BATTIERIES PACKED WITH EQUIPMENT
IMO/CRF class: 9
PACKING GROUP: II
UN PACKING CODE: 4G
Flash Point: Not Applicable
Other description (maine polutant, etc): NO
Number and kind of packages 252 CTN
Gross mass (kgs)/Net mass (kgs)/Cube (m3) 6375.6 KG/ 5821.2 KG / 66.318 M3
15 Container identification No./ 16 Seal number(s) 17 Container/vehicle size 18 Tare mass (kg) vehicle registration No. and type tare) (kg)
FDCU0596060 VN38705AJ
40HC 3,770 10,145.600
19 Total gross mass (including
8 This shipment is within the limitation prescribed for:
10 Vessel/flight No. and data 11 Port/place of loading
ONE MANHATTAN 040E CAI MEP
12 Port/place of discharge 13 Destination
OAKLAND Lathrop, CA
CONTAINER/VEHICLE PACKING CERTIFICATE I hereby declare that the goods described above have been packed /loaded into the container/vehicl identified above in accordance with the applicable prevision.
MUST BE COMPLETED AND SIGNED FOR ALL
CONTAINER/VEHICLE LOADS BY PERSON
RESPOSIBLE FOR PACKING/LOADING
20 Name of company 21 RECEIVING ORGANIZATION RECEIPT
Received the above number of packages/containers/trailers in apparent good order and condition,
uner stated herein: RECEIVING ORGANIZATION REMARKS :
Hailer's name 22 Name of company (OR SHIPPER PREPARING THIS NOTE)
TECHTRONIC INDUSTRIES VIETNAM MANUFACTURING
TECHTRONIC INDUSTRIES VIETNAM MANUFACTURING
COMPANY LIMITED
COMPANY LIMITED
Vehicle reg. no.
Name/status of declarant Signaure and date Name/status of declarant
Pham Thi XInh - OPD / Shipping Director Pham Thi XInh - OPD / Shipping Director
Place and data Place and date
12-Dec-24 12-Dec-24
Signature of declarant DRIVER'S SIGNATURE Signature of declarant
PHAM THI XINH PHAM THI XINH
* DANGEROUS GOODS:
You must specify: Proper Shipping Name hazard data, UN No., packing group (we are assigned) main polutant and deserve the mandatory requirements
under acceptable national and international government regulations. For the sources of the IMDG Code see 5.4.1.1
* For the purposes of the IMDG CODE see 5.4.2 (see overleaf)

<<<PAGE 7>>>

DECLARATION OF DANGEROUS GOODS IN CONTAINER & CONTAINER PACKING
CERTIFICATE (FOR MULTIMODAL TRANSPORT)
This form meets the recurements of SOLAR 7.6 chapter Vii, regulation 5, MARPOL 73/78, Annex III, regualtion 4
1 Shipper/Consignor/Sender 2 Transport document number (eg: Booking No. or B/L No.)
TECHTRONIC INDUSTRIES VIETNAM MANUFACTURING
SGNEBY828400
COMPANY LIMITED
Page 2 of 2 pages 4 Shipper's reference
BLOCK M1-M5 DAU GIAY INDUSTRIAL PARK, DAU GIAY TOWN,
THONG NHAT DISTRICT, DONG NAI PROVINCE, VN
5 Freight forwarder's reference
6 Consignee 7 Carrier (to be completed by the carrier)
TTI OUTDOOR POWER EQUIPMENT INC.
100 INNOVATION WAY SHIPPER'S DECLARATION
ANDERSON, SC 29621 I hereby declare that contents of this consigment are fully and accurately
described below by the Proper Shipping Name, and are classified
7. Notify Party SAME AS CONSIGNEE package, marked and labeled/placared and are in all respects in proper
condition for transport according to the applicable international and
national government regualtions.
I undertake to hold the Carrier fully harmless and indemnify them against
any and all losses, damage, and expenses refulting from the failure to
comply with the above.
9 Additional handing information:
8 This shipment is within the limitation prescribed for:
10 Vessel/flight No. and data 11 Port/place of loading
ONE MANHATTAN 040E CAI MEP
24hour Emergency Number
Emergency contact US: +1-800-424-9300
International Emergency: +1-703-741-5970
CNN: 14692 Chemtrec
12 Port/place of discharge 13 Destination
OAKLAND Lathrop, CA
SHIPPER EMERGENCY CONTACT:
TEL:86-13622678460 PIC: Edward
CONSIGNEE 24HRS EMERGENCY CONTACT:
TEL: +1 864-209-0505 PIC: Clay.Ellison
14 Shipping marks Number and kind of packages: Description of goods Gross mass (kg) Net mass (kg) Cube (m3)
DG Goods 252 Fiberboard box (Inner) MOWER 6375.600 5821.200 66.319
252 Fiberboard box (Outer)
UN number: UN3481
PROPER SHIPPING NAME and TECHNICAL NAME (If Required): LITHIUM ION BATTIERIES PACKED WITH EQUIPMENT
IMO/CRF class: 9
PACKING GROUP: II
UN PACKING CODE: 4G
Flash Point: Not Applicable
Other description (maine polutant, etc): NO
Number and kind of packages 252 CTN
Gross mass (kgs)/Net mass (kgs)/Cube (m3) 6375.6 KG/ 5821.2 KG / 66.319 M3
15 Container identification No./ 16 Seal number(s) 17 Container/vehicle size 18 Tare mass (kg) vehicle registration No. and type tare) (kg)
NYKU0723267 VN38673AJ
40'HC 3,830 10,205.600
19 Total gross mass (including
CONTAINER/VEHICLE PACKING CERTIFICATE I hereby declare that the goods described above have been packed /loaded into the container/vehicl identified above in accordance with the applicable prevision.
MUST BE COMPLETED AND SIGNED FOR ALL
CONTAINER/VEHICLE LOADS BY PERSON
RESPOSIBLE FOR PACKING/LOADING
20 Name of company 21 RECEIVING ORGANIZATION RECEIPT
Received the above number of packages/containers/trailers in apparent good order and condition,
uner stated herein: RECEIVING ORGANIZATION REMARKS :
Hailer's name 22 Name of company (OR SHIPPER PREPARING THIS NOTE)
TECHTRONIC INDUSTRIES VIETNAM MANUFACTURING
TECHTRONIC INDUSTRIES VIETNAM MANUFACTURING
COMPANY LIMITED
COMPANY LIMITED
Vehicle reg. no.
Name/status of declarant Signaure and date Name/status of declarant
Pham Thi XInh - OPD / Shipping Director Pham Thi XInh - OPD / Shipping Director
Place and data Place and date
12-Dec-24 12-Dec-24
Signature of declarant DRIVER'S SIGNATURE Signature of declarant
PHAM THI XINH PHAM THI XINH
* DANGEROUS GOODS:
You must specify: Proper Shipping Name hazard data, UN No., packing group (we are assigned) main polutant and deserve the mandatory requirements
under acceptable national and international government regulations. For the sources of the IMDG Code see 5.4.1.1
* For the purposes of the IMDG CODE see 5.4.2 (see overleaf)

<<<PAGE 8>>>

Subject: DG Cargo Application
1. Reference No. : SGNEBY828400
2. Vessel Name & Voyage No. : ONE MANHATTAN 040E
3. Port of Loading : CAI MEP, VIETNAM
4. Port of Transhipment, if appliable :
5. Port of Discharge : OAKLAND as all Truck (Door)
6. No. & Size/Type of Container : 2x40'HC
7. Proper Shipping Name : Lithium ion batteries packed with equipment(including lithium ion polymer batteries)
8. Technical Name : Lithium ion batteries packed with equipment(including lithium ion polymer batteries)
9. IMO Class : Class 9
10. Sub Risk, if any : N
11. UN No. : UN3481
12. Flash Point (in Celsius) : NIL
13. EMS No. : F-A, S-I
14 Marine Pollutant (Y / N) : N
15. Solid / Liquid / Gas : Solid
16. Liable to evolve Flammable Gases or Vapours : N
17. Chemical Giving Rise to Hazard : N
18. UN Packaging Code : 4G
19. Packing Group : II
20. 21. DG CARGO N/A
Outer Packaging - Type & Qty FDCU0596060 : 252 Fibreboard Box
Outer Packaging - Type & Qty NYKU0723267 : 252 Fibreboard Box
Inner Packaging - Type & Qty FDCU0596060 : 252 Fibreboard Box
Inner Packaging - Type & Qty NYKU0723267 : 252 Fibreboard Box
22. Gross Weight (kgs) FDCU0596060 : 6,375.600
Gross Weight (kgs) NYKU0723267 23. Net Weight (kgs) FDCU0596060 : 5,821.200
Net Weight (kgs) NYKU0723267 : 6,375.600
: 5,821.200
24. Limited Quantity (Y / N) : N
25. 24hour Emergency Phone Tel : 24hour Emergency Number
Emergency contact US: +1-800-424-9300
International Emergency: +1-703-741-5970
CNN: 14692 Chemtrec
26. Emergency PIC : 24hrs Shipper Emergency contact:
TEL: 86-13622678460 - Pic: Edward
CONSIGNEE 24HRS EMERGENCY CONTACT:
TEL: +1 864-209-0505 - 'PIC: Clay Ellison
Note:
1. 2. DG application must be made at least 72 hours prior to loading.
Any DG approval does not imply that space on subsequent connecting vessels also automatically granted.
POL must separately request for space confirmation on subsequent carriers.
DATE: December 12, 2024
Signature :
Full Name : PHAM THI XINH

<<<PAGE 9>>>

中国认可
检验
INSPECTION
CNAS IB0011
运输危险性鉴定报告书
Classification and Identification Report for Transport
Page 1 of 6 Pages
No.: UN2023-5464-1
海运
By Sea
第九类危险品（P903）
Dangerous Goods Class 9 (P903)
报告有效期Period of validity：2024-12-31
样 品 名 称 ......... : 锂离子电池组
OP40602VNM 标称电压: 36V 最大充电电压: 40V 6Ah 216Wh
Sample Name ............ : Li-ion battery
OP40602VNM Nominal voltage: 36V Max. charging voltage: 40V
6Ah 216Wh
委 托 单 位 ......... : Commissioner .......... : 东莞厚街科劲机电设备有限公司
TechPower Engineering(Dongguan) Company
Limited
威凯检测技术有限公司
CVC Testing Technology Co., Ltd.

<<<PAGE 10>>>

运输危险性鉴定报告书
Classification and Identification Report for Transport
Ref. No.: UN2023-5464-1 Page 2 of 6 Pages
样品信息/ Sample information
样品名称 ................................. : 锂离子电池组
Sample name.......................... : Li-ion battery
电池类别/Battery Category ..... : 锂离子电池/Lithium-ion batteries
电池型号规格/Battery Type ..... :
OP40602VNM 标称电压/ Nominal voltage: 36V 最大充电电压/ Max.
charging voltage: 40V 6Ah 216Wh
外观颜色/ Appearance ............ : 黑色和灰色/ Black & gray
委托单位/ Commissioner information
委托单位 ................................. : 东莞厚街科劲机电设备有限公司
Commissioned by ................. : TechPower Engineering(Dongguan) Company Limited
制造商/Manufacturer information
制造商 ..................................... : -
Manufacturer ......................... : GREEN PLANET DISTRIBUTION CENTRE COMPANY LIMITED
包装件信息/Package information
包装件重量/Package weight ... : 8,7kg
电池净重/ Battery net weight .. : 7,8kg
电池个数/ Battery Number ...... : 4pcs
包装件尺寸/Package size ....... : 241mm*205mm*285mm
时间信息/ Date
鉴定日期/ Inspection date ........ : 2023-11-30~2023-12-07
报告有效期/Period of validity ... : 2024-12-31
鉴定依据/Inspection refer to
国际海事组织《国际海运危险货物规则》（2022 版）
IMO INTERNATIONAL MARITIME DANGEROUS GOODS CODE (2022 Edition)
鉴定结论/ Conclusions
1. 运输名称/Proper Shipping name:
－ Lithium ion batteries
2. 危险性识别/ Hazards identification ：
－ 第九类 UN3480/ Class 9 UN3480
3. 包装符合 IMDG CODE（Amdt. 41-22）2022 版包装导则 P903 的要求/ Package complies with the
Packing Instruction P903 of IMDG CODE（Amdt. 41-22）2022 Edition.
－ 包装件满足包装等级 II 的要求。/ The package meet the Packing Group II performance
standards.
签发日期： .......................................................鉴定单位盖章
Issue Date: 2023-12-11 .....................................(Seal of CVC)
批准: 黄鲲 审核: 张思瑶 检验: 郑飞达
Approved by: Reviewed by: Inspected by:

<<<PAGE 11>>>

Ref. No.: UN2023-5464-1 Page 3 of 6 Pages
检验结果及其他事项
Inspection results and other information
1
本报告所述锂电池已经通过联合国《关于危险货物运输的建议书》第 38.3 节的相关测试要求。
UN38.3 测试报告及试验概要编号：RZUN2023-3229 / RZUN2023-3229-TS
The Lithium cells/batteries listed in the report are of type proven to meet the requirements of each
test in the UN Manual of Tests and Criteria Part III subsection 38.3. The UN38.3 test report and
test summary numbers are : RZUN2023-3229 / RZUN2023-3229-TS
2
本报告所述锂电池按照《国际海运危险货物规则》（41-22）2022 版 2.9.4（5）规定的质量管理体
系进行制造。
Lithium cells and batteries listed in this report were manufactured under the quality management
program as described in IMDG CODE (Amdt. 41-22）2022 Edition 2.9.4 (5).
3
本报告所述锂电池具有适当的防短路措施。
Lithium cells and batteries listed in this report are properly protected so as to prevent short
circuits.
4
本报告所述锂电池有适当的保护措施防止其在包装件内移位。
Lithium cells and batteries listed in this report are properly protected so as to secured against
movement within the outer package.
备注：
Remarks:
该报告中逗号用以代替小数点。
Throughout this report a comma is used as the decimal separator.
CVC-QR-301 2.0

<<<PAGE 12>>>

Ref. No.: UN2023-5464-1 Page 4 of 6 Pages
样品照片
Photos of Samples
电池/ Battery(OP40602VNM 标称电压/ Nominal voltage: 36V 最大充电电
压/ Max. charging voltage: 40V 6Ah 216Wh)
CVC-QR-301 2.0

<<<PAGE 13>>>

Ref. No.: UN2023-5464-1 Page 5 of 6 Pages
包装照片
Photos of Packages
包装件/ Package
CVC-QR-301 2.0

<<<PAGE 14>>>

Page 6 of 6 Pages
注 意 事 项
Important Notice
1. 本鉴定报告书仅对送检样品有效。
This report is valid for the tested samples only.
2. 申请人提供的样品须与实际运输货物一致。
The goods applied for shipment must be in conformity with the
tested samples.
3. 本鉴定报告书无鉴定单位印章无效。
This report is invalid without the seal of CVC.
4. 本鉴定报告书无批准人、审核人及检验人签名无效。
This report is invalid without the signatures of Ratifier, Reviewer
and Inspector.
5. 本鉴定报告书涂改无效。
This report is invalid if altered.
6. 本鉴定报告仅纸质版或电子版原件有效，任何形式未经许可的报告
复制件均无效，包括但不限于复印件、传真件及扫描件等。
The original softcopy or hardcopy of this report is the only valid
version. Any form of unauthorized copy of the report is invalid,
including but not limited to photocopies, faxes and scanned
documents.
7. 本 鉴 定 报 告 书 可 以 通 过 扫 描 封 面 二 维 码 或 登 录 网 站
http://www.cvc.org.cn 进行核实。
This appraisal report can be verified by scanning the QR code on
the cover or on the website http://www.cvc.org.cn.
地 址：中国 广州市科学城开泰大道天泰一路 3 号
Address: No.3,Tiantaiyi Road, Kaitai Avenue, Science City, Guangzhou,
P. R. China.
电 话(Tel)：(020)32293888
传 真(FAX)：(020)32293889
邮政编码(Post Code)：510663
E-mail: office@cvc.org.cn
http://www.cvc.org.cn
CVC-QR-301 2.0

<<<PAGE 15>>>

中国认可
检验
INSPECTION
CNAS IB0011
运输危险性鉴定报告书
Classification and Identification Report for Transport
Page 1 of 6 Pages
No.: UN2023-5486-1
海运
By Sea
第九类危险品（P903）
Dangerous Goods Class 9 (P903)
报告有效期Period of validity：2024-12-31
样 品 名 称 ......... : 锂离子电池组
OP40504VNM, RY36B50B, R36BTY5 Rated voltage/额定电压: 36V
Nominal voltage/标称电压: 40V 5Ah 180Wh
Sample Name ............ : Li-ion battery pack
OP40504VNM, RY36B50B, R36BTY5 Rated voltage/额定电压: 36V
Nominal voltage/标称电压: 40V 5Ah 180Wh
委 托 单 位 ......... : Commissioner .......... : 东莞厚街科劲机电设备有限公司
TechPower Engineering(Dongguan) Company
Limited
威凯检测技术有限公司
CVC Testing Technology Co., Ltd.

<<<PAGE 16>>>

运输危险性鉴定报告书
Classification and Identification Report for Transport
Ref. No.: UN2023-5486-1 Page 2 of 6 Pages
样品信息/ Sample information
样品名称 ................................. : 锂离子电池组
Sample name.......................... : Li-ion battery pack
电池类别/Battery Category ..... : 锂离子电池/Lithium-ion batteries
电池型号规格/Battery Type ..... :
OP40504VNM, RY36B50B, R36BTY5 Rated voltage/额定电压: 36V
Nominal voltage/标称电压: 40V 5Ah 180Wh
外观颜色/ Appearance ............ : 黑色和灰色/ Black & gray
委托单位/ Commissioner information
委托单位 ................................. : 东莞厚街科劲机电设备有限公司
Commissioned by ................. : TechPower Engineering(Dongguan) Company Limited
制造商/Manufacturer information
制造商 ..................................... : -
Manufacturer ......................... : GREEN PLANET DISTRIBUTION CENTRE COMPANY LIMITED
包装件信息/Package information
包装件重量/Package weight ... : 17,4kg
电池净重/ Battery net weight .. : 16,3kg
电池个数/ Battery Number ...... : 12pcs
包装件尺寸/Package size ....... : 405mm*315mm*215mm
时间信息/ Date
鉴定日期/ Inspection date ........ : 2023-11-30~2023-12-07
报告有效期/Period of validity ... : 2024-12-31
鉴定依据/Inspection refer to
国际海事组织《国际海运危险货物规则》（2022 版）
IMO INTERNATIONAL MARITIME DANGEROUS GOODS CODE (2022 Edition)
鉴定结论/ Conclusions
1. 运输名称/Proper Shipping name:
－ Lithium ion batteries
2. 危险性识别/ Hazards identification ：
－ 第九类 UN3480/ Class 9 UN3480
3. 包装符合 IMDG CODE（Amdt. 41-22）2022 版包装导则 P903 的要求/ Package complies with the
Packing Instruction P903 of IMDG CODE（Amdt. 41-22）2022 Edition.
－ 包装件满足包装等级 II 的要求。/ The package meet the Packing Group II performance
standards.
签发日期： .......................................................鉴定单位盖章
Issue Date: 2023-12-11 .....................................(Seal of CVC)
批准: 黄鲲 审核: 张思瑶 检验: 郑飞达
Approved by: Reviewed by: Inspected by:

<<<PAGE 17>>>

Ref. No.: UN2023-5486-1 Page 3 of 6 Pages
检验结果及其他事项
Inspection results and other information
1
本报告所述锂电池已经通过联合国《试验和标准手册》 第三部分第 38.3 节的相关测试要求。 UN38.3
测试报告编号及试验概要的编号为：RZUN2023-2771 / RZUN2023-2771-TS。
The Lithium cells/batteries listed in the report are of type proven to meet the requirements of each
test in the UN Manual of Tests and Criteria Part III subsection 38.3. The UN38.3 test report and
test summary numbers are RZUN2023-2771 / RZUN2023-2771-TS.
2
本报告所述锂电池按照《国际海运危险货物规则》（41-22）2022 版 2.9.4（5）规定的质量管理体
系进行制造。
Lithium cells and batteries listed in this report were manufactured under the quality management
program as described in IMDG CODE (Amdt. 41-22）2022 Edition 2.9.4 (5).
3
本报告所述锂电池具有适当的防短路措施。
Lithium cells and batteries listed in this report are properly protected so as to prevent short
circuits.
4
本报告所述锂电池有适当的保护措施防止其在包装件内移位。
Lithium cells and batteries listed in this report are properly protected so as to secured against
movement within the outer package.
备注：
Remarks:
1. 该报告中逗号用以代替小数点。
Throughout this report a comma is used as the decimal separator.
2. 该样品型号有OP40504VNM, RY36B50B, R36BTY5 区别仅在于标签不同，其它完全一致，均属
于同一款电池。本报告受检样品型号为：OP40504VNM
The samples that have models of OP40504VNM, RY36B50B, R36BTY5 are the same battery,
only different in labels. The model of tested samples is OP40504VNM in this report.
CVC-QR-301 2.0

<<<PAGE 18>>>

Ref. No.: UN2023-5486-1 Page 4 of 6 Pages
样品照片
Photos of Samples
电池/ Battery(OP40504VNM, RY36B50B, R36BTY5
Rated voltage/额定电压: 36V Nominal voltage/标称电压: 40V 5Ah 180Wh)
CVC-QR-301 2.0

<<<PAGE 19>>>

Ref. No.: UN2023-5486-1 Page 5 of 6 Pages
包装照片
Photos of Packages
包装件/ Package
CVC-QR-301 2.0

<<<PAGE 20>>>

Ref. No.: UN2023-5486-1 Page 6 of 6 Pages
注 意 事 项
Important Notice
1. 本鉴定报告书仅对送检样品有效。
This report is valid for the tested samples only.
2. 申请人提供的样品须与实际运输货物一致。
The goods applied for shipment must be in conformity with the
tested samples.
3. 本鉴定报告书无鉴定单位印章无效。
This report is invalid without the seal of CVC.
4. 本鉴定报告书无批准人、审核人及检验人签名无效。
This report is invalid without the signatures of Ratifier, Reviewer
and Inspector.
5. 本鉴定报告书涂改无效。
This report is invalid if altered.
6. 本鉴定报告仅纸质版或电子版原件有效，任何形式未经许可的报告
复制件均无效，包括但不限于复印件、传真件及扫描件等。
The original softcopy or hardcopy of this report is the only valid
version. Any form of unauthorized copy of the report is invalid,
including but not limited to photocopies, faxes and scanned
documents.
7. 本 鉴 定 报 告 书 可 以 通 过 扫 描 封 面 二 维 码 或 登 录 网 站
http://www.cvc.org.cn 进行核实。
This appraisal report can be verified by scanning the QR code on
the cover or on the website http://www.cvc.org.cn.
地 址：中国 广州市科学城开泰大道天泰一路 3 号
Address: No.3,Tiantaiyi Road, Kaitai Avenue, Science City, Guangzhou,
P. R. China.
电 话(Tel)：(020)32293888
传 真(FAX)：(020)32293889
邮政编码(Post Code)：510663
E-mail: office@cvc.org.cn
http://www.cvc.org.cn
CVC-QR-301 2.0

<<<PAGE 21>>>

U.S. Department
of Transportation
400 Seventh St., S.W.
Special Programs
Research and
NOV - 4 2003
Washington, D.C. 20590
Administration
Mr. Steven Charles Hunt
18436 Hawthorne Blvd.
ShipMate, Inc.
Ref. No. 03-0224
Suite 201
Torrance, CA 90504
Dear Mr. Hunt:
This responds to your April 29, 2003 letter concerning hazardous materials transportation
security requirements adopted under a final rule published March 25, 2003. Specifically, you ask
whether the security plan requirements established in the final rule apply to shipments of Class 9
materials (e.g., Air Bag Module, 9, UN3268, III) when offered for transportation by vessel. It is
your understanding that a freight container carrying a hazardous material such as an air bag
module, described as an "Air Bag Module, 9, UN3268, III," must be placarded when offered for
transportation by vessel even when the freight container carries only one 10-pound fiberboard
box.
Your understanding is incorrect. Section 172.514(a) requires a bulk packaging containing a
hazardous material to be placarded as specified in §§ 172.504 and 172.505. Section
172.504(f)(9) excepts domestic shipments of Class 9 materials from the placarding requirements.
Thus, a placard is not required for domestic shipments of Class 9 materials; however,
international shipments of Class 9 materials may need to be placarded in accordance with
international regulations. If a CLASS 9 placard is not required for the domestic portion of
transportation, the security plan requirements in Subpart I do not apply to such shipments, even if
a CLASS 9 placard is required for the international portion of transportation. Note, however,
that a person who offers or transports a Class 9 material in a bulk packaging having a capacity
equal to or greater than 13,248 L (3,500 gallons) for liquids or gases or more than 13.24 cubic
meters (468 cubic feet) for solids must develop and implement a security plan, irrespective of
placarding requirements (see § 172.800(b)(4)).
The HM-232 final rule also includes new security training requirements. Section 172.704(a)(4)
requires all hazmat employees, defined in § 171.8 of the HMR, to receive security awareness
raining. Thus, even though your Class 9 shipments may not be subject to security plan
equirements, your hazmat employees must receive security awareness training. We have developer
a computer-based security awareness CD-ROM that can be used to satisfy the security awareness
training requirements in § 172.704(a)(4). The training CD-ROM is available to the public at no
charge; it can be downloaded from our website (http://hazmat.dot.gov/hmt_security.htm) or ordered
from our Training and Initiatives Office at 202-366-4900.
172,704,
030224
172.800

<<<PAGE 22>>>

office.
I hope this information is helpful. If you have further questions, please do not hesitate to contact this
Sincerely,
usan trol
Susan Gorsky, Regulations Officer
Office of Hazardous Materials Standards

<<<PAGE 23>>>

, SEP 09'03 17:13 FR TMS LEGAL
310 468 7808 TO 912023663012
P.02/03
•
ShipMate, Inc.
18436 Huwliome Bivel, Suite: 201
ShipMate®
Turrarice, CA 90504
Durera Griet
Phone: 310-370-3600
Fux. 310-370-5700
Г-mail: shipmate@shipmate.com
April 29. 2003
Betts
Mr. Laward I: Mazzullo
§172.800
Chief, Standards Branch (DI IM-10))
Research and Special Programs Administration
400 Seventh Stroct Sw
U.S. Department of Transportation
Security Plans
Washington, DC 20590-0001
03-0224
sub|: Request for Clarification, U.S. DOT Final Rulericking HM-232
Dear Mr. Mazzullo:
This request for Interpretation is being submitted by Steven Charles I lunt, ShipMate, Inc... on
behalf of the members of the North American Automotive HazMal Acliun Committee
(NAAHAC), herein collectively referred to as the "Potitioner."
Register, Vol. 68, No. 57, on March 25, 200S, requires thal a Hazardous Materials Security
U.S. Department of Transportation final rulemaking. HM-232, published in the lederal
materials employees when a person who offers for transportation or transports In
Plan be developed and detailed HiM security training be provided to affected hazardous
commence one or more of the hazardous materials listed in subpart G of 49 CFR part 10/.
which includes a qualily ur huzardous malerial that requires placarding under subpart F
The requirements of 49 CFR $172.512 require that placards shall be attixed "...to the freight
carrying a hazardous materlal such as an alr bag module, described us an AIR BAG
container (with) the placards required by 9172.504." This implies that a freight container
MODULE, 9, UN3268, Ill, must be placardod when ottored for transportation by vessel even
when the freight container carries only one 10 pound tiberboard box.
fiberboard box containing an dir bag module in a reight contalner by vessel to be subject
A stricl interprelulion of these provisions would require a company that offers one
to the HM Security l'lan requirements and detailed HM security training, whercas another
subject the requiremens because of the plucurding exceplion in 49 CFR 9172.504(D(9).
company that offers thousands of packages in one vahicle by highway would not be
appllcability of the I IM Security Plan and corresponding "detailed" HM security training
Aacordingly. the petitioner requests a written interpretation or clarification on the
quantitles (e.g., less than 1000 Ibs In a transport conveyance) uf hazardous malertals lister!
requirement.
Is it the intent of the RSPA to require the lIM Sacurity Plan for "larger"
in 47 CFR $172.504, Tablo 2?
Hazardous Matorials Training • Informalion Systomo + Compilanco Inspections & Audita 4 Shipping & Rogulatory SolfwaTo

<<<PAGE 24>>>

SEP
09'03 17:13 FR TMS LEGAL
310
468 7808 TO 912023663012
P.03/03
®ShipMate
(Ratigants co
Mr. Eciward T. Mozzulto
AprIl 29, 2003
Page 2 of 2
Petitioner respectully requests a reply as soon as possible.
Is the outcome of this interpretation will have a significal impuci un lhe Petitloner. thi
response would he most appreciated. If 1 may be of assistance in any way, pleaso call.
Your urgent review ang
ShipMate, inc.
cc:
Mr. Dan Wicten/loyota Motor Sales, U.S.A., Inc
Ms. Cloudla Meeks/Ford Motor Company
NAAHAC
Hazardous Materiala Training • Information Sysloma • Complianco Insacliona & Audia & Shipping & Regulatory Softwara
** TOTAL PAGE.003 **

<<<PAGE 25>>>

U.S. Department
of Transportation
Pipeline and Hazardous
Materials Safety
Administration
1200 New Jersey Avenue, SE
Washington, D.C. 20590
AUG 2 2 2012
Mr. Kenneth Kelton
Safety Director
Brothers Group, Inc.
513 East Desoto Avenue
St. Louis, MO 63147
Reference No. 12-0085
Dear Mr. Kelton:
This is in response to your letter postmarked March 21, 2012 requesting clarification of the
Hazardous Materials Regulations (HMR; 49 CFR Parts 171-180) applicable to marking and
placarding of a Class 9 (miscellaneous) hazardous material shipment, and hazardous
material endorsement requirements on a commercial driver's license (CDL).
In your letter, you describe a shipment that consists of 72, 55-gallon drums of"UN 3082,
Environmentally hazardous substances, liquid, n.o.s. (2,6-Di-tert-butylphenol),
9 (miscellaneous), PG III, Marine Pollutant," has a total weight of 34,603 pounds, and is
being transported in a motor vehicle trailer from St. Louis, MO, to Houston, TX. The drums
will be loaded into another container in Houston and transported by motor vehicle to the
coast for eventual overseas shipment via vessel transportation. Based on a
September 14, 2011letter my agency issued under Reference No. 11-0171, you state it is
your understanding that because the shipment you describe is not regulated as a hazardous
material when transported domestically, your company is not required to place placards on
all four sides of the trailer or container used to transport this shipment while in the United
States. You further state it is your understanding that the container of drums must be
placarded when offered for transportation by vessel.
Your understanding is correct. Marine pollutants transported in non-bulk packages are
excepted from regulation under the HMR unless they are transported by vessel or meet a
hazard class definition (see§ 171.4(c)). Therefore, marine pollutants are not subject to the
requirements for shipping papers, markings, labels or placards when transported by
highway, rail or air. However, please note that §§ 171.22( d) and 171.25( a) provide that a
hazardous material subject to the requirements of the International Maritime Dangerous
Goods (IMDG) Code, that is offered or intended for eventual transportation by vessel, but
not subject to the HMR may be transported in the U.S. when described, marked and labeled
in accordance with the IMDG code.
In addition, under § 172.504(f)(9), a Class 9 placard is not required for domestic
transportation. The HMR defines "domestic transportation'' as specified in § 171.8, to
include not only transportation exclusively within the United States, but also that domestic

<<<PAGE 26>>>

portion of "international transportation" which occurs between places within the United
States. Therefore, your driver is not required to display Class 9 placards on a vehicle that
contains Class 9 hazardous material while it is within the United States but, if applicable, the
vehicle may be required to be marked. Section 172.301(a)(3) requires a transport vehicle or
freight container that encloses 4,000 kg (8,820 pounds) or more of a single hazardous
material in non-bulk packages when the entire shipment has the same proper shipping name
and is loaded at the same facility to be marked on each side and each end with the
identification number of the hazardous material. Also, drums containing Class 9 material
must be marked with the applicable proper shipping name and identification number and
labeled with the Class 9 hazard warning label to comply with§§ 172.301(a) and
172.400(a)(5) of the HMR.
You also state it is your understanding from the Reference No. 11-0171letter that a hazmat
endorsement is not needed on a CDL when the material you described is transported
domestically. Your understanding is correct. Under the HMR, a driver is not required to
have a CDL with a hazmat endorsement to transport a Class 9 material by motor vehicle in
the United States, even when the eventual destination of the shipment is outside of the
United States. However, the HMR does require that the driver must receive hazardous
materials training (see§§ 177.800(c) and 177.816). This training must include general
awareness, function-specific, safety, and security awareness training as specified in
§ 172. 704( a) of the HMR, as well as driver training in the applicable requirements of
Federal Motor Carrier Safety Regulations (FMCSR; 49 CFR parts 390 through 397) and the
procedures necessary for the safe operation of that motor vehicle. Training conducted to
satisfy compliance with the current Federal Motor Carrier Safety Administration (FMCSA)
requirements for a CDL with a tank vehicle or hazardous materials endorsement, may be
used to satisfy the training requirements set forth in§ 172.704 to the extent that such
training addresses the training components specified in§ 172.704(a). Where this training
does not satisfy the HMR, the employer or self-employed person performing these tasks
must provide additional training that satisfies these requirements (see § 177 .816( c) and (d)).
In addition, CDLs and hazardous materials endorsements are regulated by FMCSA in
accordance with 49 CFR Part 383. Questions regarding FMCSA regulations should be
directed to the appropriate FMCSA field office. A list of FMCSA field offices and contact
information is available at "http://www.fmcsa.dot.gov/about/
contact/offices/displayfieldroster.asp," or you may contact FMCSA at their headquarters
offices in Washington, D.C., at (202) 366-6121.
I hope this satisfies your request.
Sincerely,
~/~~
T. Glenn Foster
Chief, Regulatory Review and Reinvention Branch
Standards and Rulemaking Division
2

<<<PAGE 27>>>

BROTHERS GROUP INC.
513 EAST DESOTO AVENUE
PO BOX 470218
ST. LOUIS, MO 63147
314 231 0805 FAX 314 231 6875
USDOT
PHMSA Office Of Hazardous Materials Standards
Attn: PHH-10
East Building
1200New Jersey Ave, SE.
Washington, DC 20590-0001
Dear Sir Or Madam
I am requesting a clarification for a shipment of 72 drums 34603 lbs of UN 3082, ENVIRONMENTALLY
HAZARDOUS SUBSTANCES,LIQUID,N.O.S.
( 2,6-Dl-TERT-BUTYLPHENOL) 9, III MARINE POLLUTANT
This shipment was loaded at one facility with no other product on the trailer. The shipment is going from St
Louis Mo to Houston TX and from there it will be loaded on a container and taken to the coast for
shipment over seas. I know it must be placard for the vessel over seas. I believe this shipment can be
transported to Houston TX without placards according to 49 CFR 172.504 and I believe that 49CFR
172.301 (3) does not apply to this shipment because this is not consider a hazardous material when shipped
domestically.( 172-301 (3) Large Quantities Of A Single Hazardous Material In Non Bulk Packages)
sometimes referred to as the 8820 lb rule. According to PHMSA Interpretation # 11-0171 the driver does
not need the hazmat endorsement to transport domestically is another reason to believe that I would not be
required to mark the trailer on all 4 sides. If it is decided that I need to mark the trailer does the driver then
need the hazmat endorsement? Thank you for your help on this matter.
BROTHERS GROUP INC
513 EAST DESOTO AVE
STLOUIS MO 63147
KENNETH KELTON
~\!ZC :;. __ ~!~t:/:::i'
SAFTEY DIRECTOR
314-805-5003
e-mail kkelton@brotherstransfer.com
- **truncated:** false
- **body characters:** 39579
