Packaging requirements for chlorosilanes.

(a)When § 172.101 of this subchapter specifies that a hazardous material be packaged under this section, only non-bulk packagings prescribed in this section may be used for its transportation. Each packaging must conform to the general packaging requirements of subpart B of part 173, to the requirements of part 178 of this subchapter at the Packing Group I or II performance level (unless otherwise excepted), and to the particular requirements of the special provisions of Column (7) of the § 172.101 Table.#

(b)The following combination packagings are authorized:#

Outer packagings:#

Steel drum: 1A2#

Plastic drum: 1H2#

Plywood drum: 1D#

Fiber drum: 1G#

Steel box: 4A#

Natural wood box: 4C1 or 4C2#

Plywood box: 4D#

Reconstituted wood box: 4F#

Fiberboard box: 4G#

Expanded plastic box: 4H1#

Solid plastic box: 4H2#

Inner packagings:#

Glass or Steel receptacle#

(c)Except for transportation by passenger aircraft, the following single packagings are authorized:#

Steel drum: 1A1#

Steel jerrican: 3A1#

Plastic receptacle in steel drum: 6HA1#

Cylinders (for liquids in PG I), specification or UN standard, as prescribed for any compressed gas, except Specification 3HT and those prescribed for acetylene#

Cylinders (for liquids in PG II), specification, as prescribed for any compressed gas, except Specification 8 and 3HT cylinders.#