Regulationcurrent
49 CFR 178.255-14
-14 Marking.
Current as of 2026-08-18 Government source
eCFR editorial compilationAuthoritative but unofficial
View source (a)In addition to markings required by Section VIII of the ASME Code (IBR, see § 171.7 of this subchapter), every tank shall bear permanent marks at least 1/8-inch high stamped into the metal near the center of one of the tank heads or stamped into a plate permanently attached to the tank by means of brazing or welding or other suitable means as follows:#
Manufacturer's name ______________ Serial No. DOT specification Nominal capacity ______________ (gallons) Tare weight ______________ (pounds) Date of manufacture#
(b)[Reserved]#