What documents are incorporated by reference partly or wholly in this part?

§ 192.7 What documents are incorporated by reference partly or wholly in this part?#

(a)Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. All approved incorporation by reference#

(IBR)material is available for inspection at the Pipeline and Hazardous Materials Safety Administration#

(PHMSA)1200 New Jersey Avenue SE, Washington, DC 20590; 202-366-4046; https://www.phmsa.dot.gov/pipeline/regs and at the National Archives and Records Administration (NARA). Contact PHMSA at: Office of Pipeline Safety, Pipeline and Hazardous Material Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590; 202-366-4046; www.phmsa.dot.gov/pipeline/regs. For information on the availability of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations.html or email fr.inspection@nara.gov. It is also available from the sources in the following paragraphs of this section#

(b)American Petroleum Institute (API), 200 Massachusetts Ave. NW, Suite 1100, Washington, DC 20001, and phone: 202-682-8000, website: https://www.api.org.#

(1)API Recommended Practice 5L1, "Recommend Practice for Railroad Transportation of Line Pipe," 7th edition, September 2009, (API RP 5L1), IBR approved for § 192.65(a).#

(2)API Recommended Practice 5LT, "Recommended Practice for Truck Transportation of Line Pipe," First edition, March 2012, (API RP 5LT), IBR approved for § 192.65(c).#

(3)API Recommended Practice 5LW, "Recommended Practice for Transportation of Line Pipe on Barges and Marine Vessels," 3rd edition, September 2009, (API RP 5LW), IBR approved for § 192.65(b).#

(4)API Recommended Practice 80, "Guidelines for the Definition of Onshore Gas Gathering Lines" 1st edition, April 2000, (API RP 80), IBR approved for § 192.8(a).#

(5)API Recommended Practice 1162, "Public Awareness Programs for Pipeline 1st edition, December 2003, (API RP 1162), IBR approved for § 192.616(a), (b), and (c).#

(6)API Recommended Practice 1165, Practice for Pipeline SCADA First edition, January 2007, (API RP 1165), IBR approved for § 192.631(c).#

(7)API Specification 5L, Line Pipe, 46th edition, April 2018, including Errata 1 (May 2018), (API Spec 5L); IBR approved for §§ 192.55(e); 192.112(a), (b), (c), (d), and (e); 192.113; appendix B to part 192.#

(8)API Specification 6D, Specification for Pipeline and Piping Valves, 24th edition, August 2014, including Errata 1 through 10 (October 2014 through July 2021), Addendum 1 (March 2015), and Addendum 2 (June 2016), (API Spec 6D); IBR approved for § 192.145(a).#

(9)API Standard 1104, Welding of Pipelines and Related Facilities, 21st edition, September 2013, including Errata 1 through 5 (April 2014 through September 2018), Addendum 1 (2014), and Addendum 2 (2016), (API Std 1104); IBR approved for §§ 192.225(a); 192.227(a); 192.229(b) and (c); 192.241(c); appendix B to part 192.#

(10)API Recommended Practice 1170, "Designa and Operation of Solution-mined Salt Caverns Used for Natural Gas Storage," First edition, July 2015 (API RP 1170), IBR approved for § 192.12.#

(11)API Recommended Practice 1171, "Functional Integrity of Natural Gas Storage in Depleted Hydrocarbon Reservoirs and Aquifer Reservoirs," First edition, September 2015, (API RP 1171), IBR approved for § 192.12#

(c)American Society of Mechanical Engineers (ASME), Three Park Avenue, New York, NY 10016, 800- 843-2763; email: CustomerCare@asme.org; website: www.asme.org/.#

(1)(ASME/ANSI B16.1-2005, "Gray Iron Pipe Flanges and Flanged Fittings: (Classes 25, 125, and 250)," August 31, 2006, (ASME/ANSI B16.1), IBR approved for § 192.147(c).#

(2)ASME/ANSI B16.5-2003, "Pipe Flanges and Flanged Fittings," October 2004, (ASME/ANSI B16.5), IBR approved for §§ 192.147(a), 192.607(f).#

(3)ASME B16.40-2008, "Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution Systems," March 18, 2008, approved by ANSI, (ASME B16.40- 2008), IBR approved for Item I, Appendix B to Part 192.#

(4)ASME/ANSI B31G-1991 (Reaffirmed 2004, "Manual for Determining the Remaining Strength of Corroded Pipelines," 2004, (ASME/ANSI B31G), IBR approved for §§ 192.485(c), 192.632(a), 192.712(b), and 192.933(a).#

(5)ASME B31.8-2018, Gas Transmission and Distribution Piping Systems, Issued November 20, 2018, (ASME B31.8); IBR approved for §§ 192.112(b); 192.619(a).#

(6)ASME/ANSI B31.8S-2004, "Supplement to B31.8 on Managing System Integrity of Gas Pipelines," approved January 14, 2005 (ASME/ANSI B31.8S-2004), IBR approved for §§ 192.714(d); 192.933(d).#

(7)ASME B31.8S-2018, Managing System Integrity of Gas Pipelines, Issued November 28, 2018, (ASME B31.8S); IBR approved for §§ 192.13(d); 192.714(c); 192.903 note to Potential impact radius; 192.907 introductory text and (b); 192.911 introductory text, (i), and#

(k)through (m); 192.913(a) through (c); 192.917(a) through (e); 192.921(a); 192.923(b); 192.925(b); 192.933(c); 192.935(b); 192.937(c); 192.939(a); 192.945(a).#

(8)ASME B36.10M-2018, Welded and Seamless Wrought Steel Pipe, Issued October 12, 2018, (ASME B36.10M); IBR approved for § 192.279.#

(9)ASME Boiler & Pressure Vessel Code, Section VIII, Division 2 "Rules, Rules for Construction of Pressure Vessels" 2007 edition, July 1, 2007, (ASME BPVC, Section VIII, Division 2), IBR approved for §§ 192.153(b), (d); and 192.165(b).#

(10)ASME Boiler & Pressure Vessel Code, Section IX: "Qualification Standard for Welding and Brazing Procedures, Welders, Brazers, and Welding and Brazing 2007 edition, July 1, 2007, ASME BPVC, Section IX, IBR approved for §§ 192.225(a); 192.227(a); and Item II, Appendix B to Part 192.#

(11)API Standard 1163, "In-Line Inspection Systems Qualification," Second edition, April 2013, Reaffirmed August 2018, (API STD 1163), IBR approved for § 192.493.#

(d)American Society for Nondestructive Testing (ASNT), P.O. Box 28518, 1711 Arlingate Lane, Columbus, OH 43228, phone: 800-222-2768, website: https://www.asnt.org/.#

(1)ANSI/ASNT ILI-PQ-2005 (2010), "In-line Inspection Personnel Qualification and Certification," Reapproved October 11, 2010, (ANSI/ASNT-PQ), IBR approved for § 192.493.#

(2)[Reserved]#

(e)ASTM International (ASTM), 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428; phone:#

(610)832-9585; email: service@astm.org; website: www.astm.org.#

(1)ASTM A53/A53M-20, Standard Specification for Pipe, Steel, Black and Hot- Dipped, Zinc-Coated, Welded and Seamless, approved July 1, 2020, (ASTM A53/A53M); IBR approved for § 192.113; appendix B to part 192.#

(2)ASTM A106/A106M-19A, Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service, approved November 1, 2019, (ASTM A106/A106M); IBR approved for § 192.113; appendix B to part 192.#

(3)ASTM A333/A333M-18, Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness, approved November 1, 2018, (ASTM A333/A333M); IBR approved for § 192.113; appendix B to part 192.#

(4)ASTM A372/A372M-10, "Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels," approved October 1, 2010, (ASTM A372/A372M), IBR approved for § 192.177(b).#

(5)ASTM A381/A381M-18, Standard Specification for Metal-Arc-Welded Carbon or High-Strength Low-Alloy Steel Pipe for Use with High-Pressure Transmission Systems, approved November 1, 2018, (ASTM A381); IBR approved for § 192.113; appendix B to part 192.#

(6)ASTM A578/A578M-96 (reapproved 2001), "Standard Specification for Straight- Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications," (ASTM A578/A578M), IBR approved for § 192.112(c).#

(7)ASTM A671/A671M-20, Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures, approved March 1, 2020, (ASTM A671/A671M); IBR approved for § 192.113; appendix B to part 192.#

(8)ASTM A672/A672M 09, "Standard Specification for Electric- Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperature," approved October 1, 2009, (ASTM A672/672M), IBR approved for § 192.113 and Item I, Appendix B to Part 192.#

(9)ASTM A691/A691M-19, Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures, approved November 1, 2019, (ASTM A691/A691M); IBR approved for § 192.113; appendix B to part 192.#

(10)ASTM D638-03, "Standard Test Method for Tensile Properties of Plastics," 2003, (ASTM D638), IBR approved for § 192.283(a) and (b).#

(11)ASTM D2513-18a, "Standard Specification for Polyethylene#

(PE)Gas Pressure Pipe, Tubing, and Fittings," approved August 1, 2018, (ASTM D2513), IBR approved for Item I, Appendix B to Part 192.#

(12)ASTM D2517-00, "Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings," (ASTM D 2517), IBR approved for §§ 192.191(a); 192.281(d); 192.283(a); and Item I, Appendix B to Part 192.#

(13)ASTM D2564-12, "Standard Specification for Solvent Cements for Poly (Vinyl Chloride)(PVC) Plastic Piping Systems," August 1, 2012, (ASTM D2564- 12), IBR approved for §192.281(b)(2).#

(14)ASTM F1055- 98 (Reapproved 2006), "Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing," March 1, 2006, (ASTM F1055-98 (2006)), IBR approved for § 192.283(a), Item I, Appendix B to Part 192.#

(15)ASTM F1055-98 (Reapproved 2006), "Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing," March 1,2006, ASTM F1055-98 (2006)), IBR approved for §192.283(a), Item I Appendix B to Part 192 ASTM F1924-12), "Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing, " April 1, 2012 (ASTM F1924-12), IBR approved for Item 1 Appendix B to Part 192.#

(16)ASTM F1948-12, (Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing," April 1, 2012, (ASTM F1948-12), IBR approved for Item I, Appendix B to Part 192.#

(17)ASTM F1973-13, "Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene#

(PE)and Polyamide 11#

(PA11)and Polyamide 12#

(PA12)Fuel Gas Distribution Systems," May 1, 2013, (ASTM F1973- 13), IBR approved for §192.204(b); and Item I, Appendix B to Part 192.#

(18)ASTM F2145-13, 'Standard Specification for Polyamide 11#

(PA11)and Polyamide 12#

(PA12)Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing," May 1, 2013, (ASTM F2145-13), IBR approved for Item 1, Appendix B to Part 192.#

(19)ASTM F2600-09, "Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe an Tubing," April 1, 2009, (ASTM F 2600-09) IBR approved for Item I, Appendix B to Part 192.#

(20)ASTM F2620-19,"Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings," approved February 1, 2019, (ASTM F2620), IBR approved for §§192.281(c) and 192.285(b).#

(21)ASTM 2767-12, "Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution." Oct 15, 2012, (ASTM F2767-12), IBR approved for Item I, Appendix B to Part 192.#

(22)ASTM F2785-12, "Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing and Fittings," Aug. 1 2012, (ASTM F2785-12), IBR approved for Item 1, Appendix B to Part 192.#

(23)ASTM F2817-10, "Standard Specification for Poly (Vinyl Chloride)#

(PVC)Gas Pressure Pipe and Fittings for Maintenance or Repair," Feb. 1, 2010 (ASTM F2817-10), IBR approved for Item 1, Appendix B to Pat 192.#

(24)ASTM F2945-12a "Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing and Fittings," Nov 27, 2012 (ASTM F2945-12a), IBR approved for Item I, Appendix B to Part 192.#

(f)[Reserved]#

(g)Manufacturers Standardization Society of the Valve and Fittings Industry, Inc. (MSS), 127 Park St. NE., Vienna, VA 22180, phone: 703-281-6613, email: info@msshq.org; website: http://www.msshq.org/.#

(1)ANSI/MSS SP-44-2019, Steel Pipeline Flanges, published April 2020, (MSS SP- 44); IBR approved for § 192.147(a).#

(2)[Reserved]#

(h)NACE International (NACE), 1440 South Creek Drive, Houston, TX 77084: phone: 281-228- 6223 or 800-797-6223 Web site: http://www.nace.org/Publications/.#

(1)NACE Standard Practice 0102-2010 "In-Line Inspection of Pipelines," Revised 2010-03-13, (NACE SP0102), IBR approved for §§ 192.150(a) and 192.493.#

(2)NACE SP0204-2008, Standard Practice, "Stress Corrosion Cracking#

(SCC)Direct Assessment Methodology," reaffirmed September 18, 2008, (NACE SP0204); IBR approved for §§ 192.923(b); 192.929(b) introductory text,#

(b)(1)through (3),#

(b)(5)introductory text, and (b)(5)(i).#

(3)NACE SP0206-2006, Standard Practice, "Internal Corrosion Direct Assessment Methodology for Pipelines Carrying Normally Dry Natural Gas (DG-ICDA)," approved December 1, 2006, (NACE SP0206), IBR approved for §§ 192.923(b); 192.927(b),#

(c)introductory text, and#

(c)(1)through (4).#

(4)ANSI/NACE SP0502-2010, Standard Practice, "Pipeline External Corrosion Direct Assessment revised June 24, 2010, (NACE SP0502), IBR approved for §§ 192.923(b); 192.925(b); 192.931(d); 192.935(b) and 192.939(a).#

(i)National Fire Protection Association (NFPA), 1 Batterymarch Park, Quincy, Massachusetts 02169, phone:#

(617)984-7275; website: www.nfpa.org.#

(1)NFPA-30 (2012), "Flammable and Combustible Liquids Code," 2012 edition, June 20, 2011, including Errata 30-12-1 (September 27, 2011) and Errata 30-12-2 (November 14, 2011), (NFPA-30), IBR approved for § 192.735(b).#

(2)NFPA 58, Liquefied Petroleum Gas Code, 2020 edition, effective August 25, 2019, (NFPA 58); IBR approved for § 192.11.#

(3)NFPA 59, Utility LP-Gas Plant Code, 2018 edition, effective September 6, 2017, (NFPA 59); IBR approved for § 192.11.#

(4)NFPA 70, National Electrical Code (NEC), 2017 edition, effective August 24, 2016, (NFPA 70); IBR approved for §§ 192.163(e); 192.189(c).#

(j)Pipeline Research Council International, Inc. (PRCI), c/o Technical Toolboxes, 3801 Kirby Drive, Suite 520, P.O. Box 980550, Houston, TX 77098, phone: 713-630-0505, toll free: 866-866-6766, Web site: http://www.ttoolboxes.com/. (Contract number PR3-805.)#

(1)AGA, Pipeline Research Committee Project, PR-3-805, "A Modified Criterion for Evaluating the Remaining Strength of Corroded Pipe," (December 22, 1989), (PRCI PR-3-805 (R-STRENG)), IBR approved for §§ 192.485(c); 192.632(a); 192.712(b); 192.933(a) and (d).#

(2)[Reserved]#

(k)Plastics Pipe Institute, Inc. (PPI),105 Decker Court, Suite 825 Irving TX 75062, phone: 469-499-1044, http://www.plasticpipe.org/.#

(1)PPI TR-3/2012,HDB/HDS/PDB/SDB/MRS/CRS, Policies, "Policies and Procedures for Developing Hydrostatic Design Basis (HDB), Hydrostatic Design Stresses (HDS), Pressure Design Basis (PDB), Strength Design Basis (SDB), Minimum Required Strength#

(MRS)Ratings, and Categorized Required Strength#

(CRS)for Thermoplastic Piping Materials or Pipe," updated November 2012, (PPI TR-3/2012), IBR approved for §192.121.#

(2)PPI TR-4, HDB/HDS/SDB/MRS, Listed Materials, "PPI Listing of Hydrostatic Design Basis (HDB), Hydrostatic Design Stress (HDS), Strength Design Basis (SDB), Pressure Design Basis#

(PDB)and Minimum Required Strength#

(MRS)Rating For Thermoplastic Piping Materials or Pipe," updated March 2011, (PPI TR- 4/2012), IBR approved for § 192.121.#