RegulusPipeline research66 FR 49555
Passage 1[Federal Register Volume 66, Number 189 (Friday, September 28, 2001)] [Rules and Regulations] [Pages 49555-49556] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 01-24417] ======================================================================= ----------------------------------------------------------------------- Research and Special Programs Administration [Docket No. RSPA-2001-9567 (HM-189R)] RIN 2137-AD51 Hazardous Materials Regulations: Minor Editorial Corrections and Clarifications; Correction AGENCY: Research and Special Programs Administration (RSPA), DOT. ----------------------------------------------------------------------- SUMMARY: On Tuesday, August 28, 2001, RSPA published a final rule under Docket HM-189R which amended the Hazardous Materials Regulations (HMR) to correct inconsistencies in terminology and editorial errors to improve the clarity of the HMR. This final rule makes certain corrections to the August 28, 2001 final rule. FOR FURTHER INFORMATION CONTACT: Gigi Corbin, Office of Hazardous Materials Standards, (202) 366-8553, Research and Special Programs Administration, U.S. Department of Transportation, 400 Seventh Street, SW., Washington, DC 20590-0001. On August 28, 2001, RSPA published a final rule under Docket HM- 189R (66 FR 45376) to correct inconsistencies in terminology and minor editorial errors to improve the clarity of the HMR. This final rule makes minor corrections to the August 28, 2001 final rule, which was effective September 27, 2001. Because the amendments do not impose new requirements, notice and public procedure are unnecessary. The following is a summarization of the corrections made under this final rule. In amendatory instruction 55, for the entry for Sec. 173.133, we are removing the reference for paragraph (b)(1)(ii). In addition, we are adding new amendatory instruction 71a. to correct the formula in Sec. 173.133, paragraph (b)(1)(ii), by removing the acronym ``ml'' and adding the acronym ``mL'' in its place. In amendatory instruction 198, for the entry ``Sec. 179.220-24'' the word ``heading'' is removed. Accordingly, in the final rule, FR Doc. 01-16660, published at 66 FR 45376, make the following corrections:#
Passage 21. On page 45381, in column 1, in amendatory instruction 55, for the entry Sec. 173.133, the paragraph reference ``(b)(1)(ii),'' is removed. 2. On page 45382, in column 1, a new amendatory instruction 71a. is added to read as follows: 71a. In Sec. 173.133, in paragraph (b)(1)(ii), the formula is revised to read as follows: Sec. 173.133 Assignment of packing group and hazard zones for Division 6.1 materials. * * * * * (b) * * * (1) * * * (ii) * * * [GRAPHIC] [TIFF OMITTED] TR28SE01.023 3. On page 45390, in column 2, in amendatory instruction 198, for the entry ``179.220-24'' remove the word ``heading''. Issued in Washington, DC, on September 21, 2001, under authority delegated in 49 CFR part 1. Edward A. Brigham, Acting Deputy Administrator. [FR Doc. 01-24417 Filed 9-27-01; 8:45 am] BILLING CODE 4910-60-P#
This material provides agency context. It does not replace binding regulatory text, and its legal effect depends on the underlying authority and facts.