78 FR 988 - Hazardous Materials: Harmonization with International Standards (RRR) | Regulus

Passage 1[Federal Register Volume 78, Number 4 (Monday, January 7, 2013)] [Rules and Regulations] [Pages 988-1100] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2012-31243] ----------------------------------------------------------------------- Pipeline and Hazardous Materials Safety Administration ----------------------------------------------------------------------- Hazardous Materials: Harmonization with International Standards (RRR), Harmonization with the United Nations, and Transportation of Lithium Batteries; Final Rules and Proposed Rule Federal Register / Vol. 78 , No. 4 / Monday, January 7, 2013 / Rules and Regulations ----------------------------------------------------------------------- Pipeline and Hazardous Materials Safety Administration 49 CFR Parts 171, 172, 173, 175, 176, 177, and 178 [Docket Nos. PHMSA-2012-0027 (HM-215L)] RIN 2137-AE87 Hazardous Materials: Harmonization with International Standards (RRR) AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ----------------------------------------------------------------------- SUMMARY: PHMSA is amending the Hazardous Materials Regulations to maintain alignment with international standards by incorporating various amendments, including changes to proper shipping names, hazard classes, packing groups, special provisions, packaging authorizations, air transport quantity limitations, and vessel stowage requirements. These revisions are necessary to harmonize the Hazardous Materials Regulations (HMR) with recent changes made to the International Maritime Dangerous Goods (IMDG) Code, the International Civil Aviation Organization's Technical Instructions for the Safe Transport of Dangerous Goods by Air (ICAO Technical Instructions), and the United Nations Recommendations on the Transport of Dangerous Goods--Model Regulations (UN Model Regulations) and address a petition for rulemaking.#

Passage 2DATES: Effective Date: January 1, 2013. Voluntary compliance date: PHMSA is authorizing voluntary compliance beginning January 1, 2013. Delayed compliance date: Unless otherwise specified, compliance with the amendments adopted in this final rule is required beginning January 1, 2014. Incorporation by reference date: The incorporation by reference of certain publications listed in this rule is approved by the Director of the Federal Register as of January 1, 2013. FOR FURTHER INFORMATION CONTACT: Vincent Babich or Shane Kelley, International Standards, telephone (202) 366-8553, Pipeline and Hazardous Materials Safety Administration, U.S. Department of Transportation, 1200 New Jersey Avenue SE., 2nd Floor, Washington, DC 20590-0001. SUPPLEMENTARY INFORMATION: I. Executive Summary II. Background III. Comment Discussion IV. Section-by-Section Review V. Regulatory Analyses and Notices A. Statutory/Legal Authority for the Rulemaking B. Executive Orders 12866 and 13563 and DOT Regulatory Policies and Procedures C. Executive Order 13132 D. Executive Order 13175 E. Regulatory Flexibility Act, Executive Order 13272, and DOT Policies and Procedures F. Paperwork Reduction Act G. Regulatory Identifier Number (RIN) H. Unfunded Mandates Reform Act I. Environment Assessment J. Privacy Act K. Executive Order 13609 and International Trade Analysis#

Passage 3In this final rule, PHMSA is amending the Hazardous Materials Regulations (HMR; 49 CFR Parts 171-180) to incorporate changes adopted in the IMDG Code, the ICAO Technical Instructions, and the UN Model Regulations, effective January 1, 2013. These changes ensure the domestic hazard classification, hazard communication and packaging requirements are consistent with those employed throughout the world. Federal law and policy strongly favor the harmonization of domestic and international standards for hazardous materials transportation. The Federal hazardous materials transportation law (Federal hazmat law; 49 U.S.C. 5101 et seq.) directs PHMSA to participate in relevant international standard-setting bodies and encourages alignment of the HMR with international transport standards to the extent practicable while recognizing that deviations may at times be necessary to be consistent with the public interest (see 49 U.S.C. 5120). Harmonization facilitates international trade by minimizing the costs and other burdens of complying with multiple or inconsistent safety requirements for transportation of hazardous materials. Harmonization has also become increasingly important as the volume of hazardous materials transported in international commerce grows. Safety is often enhanced by creating a uniform framework for compliance. PHMSA actively participates in relevant international standard-setting bodies and promotes the adoption of standards consistent with the high safety standards set by the HMR. The foreign trade of chemicals is a large segment of the United States economy. In 2000, U.S. foreign trade in chemicals totaled $154 billion and generated a $6 billion positive trade balance. The consistency of regulations reduces regulatory compliance costs and helps to avoid costly frustrations of international shipments. PHMSA's continued leadership in maintaining consistency with international regulations enhances the hazardous materials safety program and assists in maintaining a favorable trade balance.#

Passage 4PHMSA published a notice of proposed rulemaking (NPRM) under Docket HM-215L (77 FR 49167, August 15, 2012) to incorporate various amendments to harmonize the HMR with recent changes to the UN Model Regulations, the IMDG Code, and the ICAO Technical Instructions. When considering alignment of the HMR with international standards, we review and evaluate each amendment on its own merit, on the basis of its overall impact on transportation safety, and on the basis of the economic implications associated with its adoption into the HMR. Our goal is to harmonize without diminishing the level of safety currently provided by the HMR or imposing undue burdens on the regulated community. Based on this review and evaluation, in this final rule, PHMSA is amending the HMR to incorporate changes from the 17th Revised Edition of the UN Model Regulations, Amendment 36-12 to the IMDG Code, and the 2013-2014 ICAO Technical Instructions, which become effective January 1, 2013 (The IMDG Code is effective January 1, 2013; however, the previous amendment may continue to be used until January 1, 2014). Notable amendments to the HMR in this final rule include the following: Update references to international regulations including the ICAO Technical Instructions, the International Convention for the Safety of Life at Sea, the IMDG Code, the UN Model Regulations, the UN Manual of Tests and Criteria the Canadian Transportation of Dangerous Goods Regulations and various technical standards. Add, revise, or remove certain proper shipping names, hazard classes, packing groups, special provisions, packaging authorizations, bulk packaging requirements, and passenger and cargo aircraft maximum quantity limits from the Hazardous Materials Table (HMT). Adopt new HMT entries for chemical under pressure and specify acceptable bulk and non-bulk packagings, filling limits and appropriate segregation requirements. Adopt an exception for the transport of aircraft batteries aboard passenger aircraft in excess of the quantity limits specified in column 9A of the HMT.#

Passage 5Revise the vessel stowage provisions in column 10 of the Sec. 172.101 Hazardous Materials Table (HMT). Adopt minimum size requirements for the ``UN'' or ``NA'' markings specified in Sec. 172.301. Adopt changes throughout Part 173 (packaging requirements) to: (1) authorize the use of wood as a material of package construction for certain explosives; (2) authorize the use of metals other than steel or aluminum for drums and boxes; and (3) where appropriate, permit the use of non-removable head drums in those instances where removable head drums are otherwise authorized. Adopt a new packaging definition, operational controls, performance-oriented standards, and testing requirements for Flexible Bulk Containers (FBCs).#

Passage 6In response to PHMSA's August 15, 2012 NPRM (77 FR 49167), PHMSA received comments from the following organizations and individuals: 3M Company (3M) Airline Pilots Association, International (ALPA) Caterpillar Inc. (Caterpillar) Chemically Speaking LLC (Chemically Speaking) Council on Safe Transport of Hazardous Articles (COSTHA) Dangerous Goods Advisory Council (DGAC) Dow Chemical Company (Dow) Fuel Cell & Hydrogen Energy Association (FCHEA) Healthcare Waste Institute (HWI) Horizon Lines (Horizon) International Vessel Operators Dangerous Goods Association (IVODGA) Jamie Lee Guzman Mercotac Inc. Nora Nucon International Inc. (Nucon) PRBA-The Rechargeable Battery Association (PRBA) Saft America (Saft) Sporting Arms and Ammunition Manufacturing Institute (SAAMI) Stericycle, Inc. (Stericycle) United Airlines (United) United Parcel Service (UPS) VaporLok Products, LLC (Vaporlok) Veolia ES Technical Solutions, L.L.C. (Veolia) Below is a listing of major amendments to the international transportation regulations that we proposed for adoption into the HMR, a brief synopsis of the comments we received regarding those proposals and PHMSA's position regarding the comments. Additional comments are addressed in the section-by-section analysis section. Incorporation by Reference In the NPRM, PHMSA proposed to incorporate by reference the latest editions of various international transport standards including the 2013-2014 ICAO Technical Instructions, Amendment 36-12 of the IMDG Code, the 17th Revised Edition of the UN Model Regulations, and the Canadian Transportation of Dangerous Goods Regulations to include Amendments 8, 9, and 10. Finally, PHMSA proposed the incorporation by reference of new and updated standards published by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). PHMSA received general support from the commenters on the principle of harmonizing the U.S. regulations with international transport and technical standards. We did not receive any comments that opposed our proposals to incorporate these standards and will adopt them in this final rule. Chemical Under Pressure In the NPRM, PHMSA proposed to amend the HMT to include individual entries for chemical under pressure and incorporate other safety requirements including, but not limited to, quantity and filling limits and packaging and segrega#

Passage 7tion requirements. PHMSA received one comment on this proposal from 3M in support of the proposals to add entries for chemical under pressure. 3M requested we authorize the use of non- refillable cylinders larger than 1.25 liters containing flammable gas consistent with the UN Model Regulations. PHMSA's intent regarding the chemical under pressure entry was to comprehensively align the requirements of this entry with international standards. In this final rule we are revising the packaging requirements for chemical under pressure to authorize the use of non-refillable cylinders larger than 1.25 liters for chemical under pressure. Aircraft Batteries In the NPRM, PHMSA proposed to revise the HMR to permit the transport of wet cell aircraft batteries and lithium ion aircraft batteries aboard passenger aircraft in excess of the quantity limited specified in column 9A of the HMR. PHMSA received comments from Saft and PRBA in support of these proposed amendments because these changes would further harmonize the HMR with the ICAO Technical Instructions. Both Saft and PRBA cite a requirement in the ``FAA Modernization and Reform Act of 2012'' (Sec. 828, Pub. L 112-95; 126 Stat. 133 (Feb 14, 2012)) (FAA Modernization and Reform Act of 2012) that states the Secretary of Transportation, including a designee of the Secretary, may not issue or enforce any regulation or other requirement regarding the transportation by aircraft of lithium metal cells or batteries or lithium ion cells or batteries, whether transported separately or packed with or contained in equipment, if the requirement is more stringent than the requirements of the ICAO Technical Instructions, and state that the NPRM proposal would be more restrictive than requirements in the ICAO Technical Instructions. The commenters noted that as proposed in the NPRM, the exception would only apply when an air carrier was transporting its own replacement items, whereas the 2013-2014 ICAO Technical Instructions does not impose this restriction. In this final rule PHMSA has revised this exception to ensure full alignment with the ICAO Technical Instructions and FAA Modernization and Reform Act of 2012 statutory requirements. Vessel Stowage Requirements In the NPRM, we proposed to revise the vessel stowage location requirements for explosives and reduce the number of explosive stowage categories from 15 to 5 in column (#

Passage 810A) of the HMT. IVODGA and SAAMI supported the proposed assignment of vessel stowage requirements for certain small arms cartridges consistent with the IMDG Code. Size Requirements for ``UN'' or ``NA'' Markings The HMR details the general marking requirements for non-bulk packages in Sec. 172.301 including the proper shipping name, the ``UN'' or ``NA'' number technical names as applicable and the consignee or consignor's name and address. In the NPRM, we proposed to adopt minimum size requirements for the ``UN'' or ``NA'' markings and provide a one year transition period. This action was consistent with recent changes adopted in the UN Model Regulations, the IMDG Code and the ICAO Technical Instructions. PHMSA received comments from the DGAC, Dow, HWI, Stericycle, and Veolia. DGAC and Dow requested an effective date of no earlier than January 1, 2017 for this requirement to allow for the depletion of finished products and labels and preprinted packaging stock. Veolia suggested the character size limit should only apply to international hazardous materials shipments. HWI and Stericycle note that the proposed#

Passage 9change would impose an unnecessary economic burden since they employ reusable packaging permanently marked with the UN number or pre-printed shipping labels that may not meet proposed minimum size marking. In response to these comments, we will delay the effective date of this requirement until January 1, 2017 and permit packages permanently marked prior to this date to remain in use until the end of their useful life. This will minimize the economic impact of this requirement and provide a suitable period to permit the depletion of preprinted packages. Flexible Bulk Containers In the NPRM, PHMSA proposed to adopt a new packaging definition, operational controls, performance-oriented standards, and testing requirements for Flexible Bulk Containers (FBCs). The proposed FBC requirements are modeled after the FBC requirements adopted into the 17th revised edition of the UN model Regulations. IVODGA and DGAC support the introduction of FBCs and since we received no adverse comments to these proposals, we will adopt these requirements as proposed. Amendments Proposed in the NPRM But Not Adopted in the Final Rule In this section, PHMSA discusses changes not adopted in the final rule as a result of comments in response to the August 15, 2012 Notice of Proposed Rulemaking (NPRM). Used Medical Devices The UN Model Regulations have been amended to exempt medical devices or equipment potentially contaminated with or containing infectious substances which are drained of free liquids from all other requirements of the UN Model Regulations. In the August 15, 2012 NPRM, PHMSA proposed to amend Sec. 173.134, ``Class 6, Division 6.2- Definitions and Exceptions'' to adopt additional exemptions for medical devices and equipment. PHMSA received one comment from COSTHA opposing our adoption of these changes to the HMR. COSTHA noted that the ICAO Dangerous Goods Panel (DGP) has reviewed and has chosen not to adopt the provisions for transportation by aircraft. COSTHA also noted that changes to the HMR before ICAO has adopted the change would lead to confusion and disharmony. COSTHA further noted that papers will be presented to both the UN and ICAO in an attempt to alter the current exceptions for used medical devices. The HMR has long standing provisions for the transport of potentially contaminated medical devices, some tied to provisions in 29 CFR, concerning the domestic ship#

Passage 10ment of such goods. Pending further UN changes and consultation with the Centers for Disease Control, PHMSA will not adopt the proposed changes to Sec. 173.134 in this final rule. Fuel in Machinery Prior to the publication of the 17th Revised Edition of the UN Model Regulations, the transport of large amounts of fuel in machinery was not specifically addressed in international transport regulations. In the most recent biennium of the UNSCOE, some experts expressed concerns about the transport of large amounts of fuel in machinery. This concern led the international community to adopt in the 17th Revised Edition of the UN Model Regulations a special provision associated with fuel-related Class 3 entries. Special Provision 363, as adopted in the UN Model Regulations, requires an article that contains fuel in excess of the limited quantity authorized amount and is ineligible to be described as Dangerous Goods in Machinery or Apparatus, UN3363, to conform to several general provisions to avoid being subject to the remainder of the HMR. In the August 15, 2012 NPRM, PHMSA proposed the addition of SP 363 for transportation by vessel to various Class 3 fuels modeled on the corresponding special provision adopted in the UN Model Regulations. PHMSA received three comments (Caterpillar, DGAC, & IVODGA) concerning our proposed adoption of special provision 363. Both DGAC and Caterpillar were opposed to PHMSA's adoption of special provision 363. Caterpillar stated that PHMSA's proposed addition of special provision 363 was not based on sufficient data demonstrating the revision would improve transport safety. Caterpillar also stated that the change would introduce conflicting requirements and regulatory uncertainty and would be excessively burdensome. DGAC stated that the adoption of special provision 363 would introduce conflicting requirements and regulatory uncertainty, and highlighted a proposal they will present to the UN to clarify special provision 363. Caterpillar noted that the proposal in the August 15, 2012 NPRM does not demonstrate through data obtained via scientific methodology any connection between the proposed revision and enhanced reductions in risks to people and the environment for all affected shipments. Caterpillar and DGAC noted that the adoption of the changes proposed in the NPRM creates conflicting requirements under the HMR for shipments of gen#

Passage 11erators and machinery. Caterpillar also commented that proposed special provision 363 is excessively burdensome and would result in millions of dollars of expenditures for unnecessary transport related costs that would ultimately raise the consumer price of affected shipments. IVODGA supported the adoption of special provision 363, stating concern that many fuel storage components within such machinery may not meet UN Performance Oriented Packaging or bulk tank specifications. IVODGA recommended PHMSA adopt special provision 363 as proposed to help prevent frustrated shipments at ports of discharge and loading in the United States. PHMSA will not adopt special provision 363 in this final rule. This decision not to adopt special provision 363 is based on several factors. The first was a lack of concrete safety or incident data that indicated a need for increased regulation of domestic shipments of machinery and equipment containing fuel in amounts over the authorized limited quantity amount for that particular fuel. Also PHMSA believes that to adopt this special provision would require a review of existing requirements for UN3166, and possibly UN3366 that has yet to take place. PHMSA would like to note that even though we are not adopting special provision 363, shippers offering hazardous materials in accordance with Subpart C of Part 171 may utilize the IMDG Code, including special provision 363, if all or part of the movement is by vessel. PHMSA would also like to note that a shipper utilizing the IMDG Code to offer cargo to a vessel for transport must still comply with special provision 363 under the IMDG Code. PHMSA will likely revisit the need to incorporate special provision 363 after a determination is made at the UN on pending papers concerning the implementation of this special provision. Requirements for Salvage Pressure Receptacles The 17th Revised Edition of the UN Model Regulations adopted guidelines for Competent Authorities to use when issuing approvals for salvage pressure receptacles. These revisions are found in Chapter 1.2, 4.1, 5.4, and 6.2 of the UN Model Regulations. Specifically, these requirements address the#

Passage 12packaging, hazard communication, and safe transport of salvage pressure receptacles, also known as salvage cylinders in the United States. The HMR currently address the packaging, hazard communication, and safe transport of salvage cylinders in Sec. 173.3(d) and do not require approval of the Associate Administrator to do so. Accordingly, PHMSA did not propose adopting this provision in the August 15, 2012, NPRM. During the comment period, PHMSA was alerted that Chemically Speaking has filed a petition (P-1596) that requests PHMSA amend the HMR to add Class 4 and Class 5 hazardous materials to the hazard classes authorized in salvage cylinders. While this petition has merit, we did not receive it in time to address in this rulemaking. We will consider this petition in a future rulemaking. Additional Clarification on the Requirements for Lithium Batteries On August 15, 2012, PHMSA published an NPRM associated with this rulemaking (RIN 2137-AE87, 77 FR 49168). In the NPRM, no specific amendments were proposed regarding the requirements for the air transportation and handling of lithium batteries. However, in that NPRM, PHMSA did propose the incorporation by reference of the 2013-2014 Edition of the ICAO Technical Instructions which covers the air transportation of lithium batteries. This final rule adopts that provision and will incorporate the 2013-2014 Edition of the ICAO Technical Instructions by reference. Upon adoption of this provision, for purposes of the HMR a shipment of lithium batteries would be permitted to be transported by air in accordance with the 2013-2014 Edition of the ICAO Technical Instructions (with the exception of primary lithium batteries and cells aboard passenger carrying aircraft and unapproved prototype lithium batteries and cells aboard passenger carrying aircraft) or the applicable requirements currently specified in the HMR (see Sec. Sec. 171.24(d)(1)(ii), and 171.24(d)(1)(iii)). Incorporation by reference of the 2013-2014 Edition of the ICAO Technical Instructions will allow shippers and carriers to choose which method of compliance is appropriate to the specific shipment. This Final Rule (RIN 2137-AE87; PHMSA-2012-0027) does not have any bearing on regulatory decisions associated with Docket HM-224F, (RIN 2137-AE44; PHMSA-2009-0095). PHMSA is requesting additional comment on various issues related to the air transportation and#

Passage 13handling of lithium batteries in a separate Notice, under the Docket for that rulemaking (RIN AE44; PHMSA-2009-0095). The following is a section-by-section review of the amendments adopted in this final rule:#

Passage 14Section 171.7 Section 171.7 provides a listing of all standards incorporated by reference into the HMR. For this rulemaking, we evaluated updated international consensus standards pertaining to proper shipping names, hazard classes, packing groups, special provisions, packaging authorizations, air transport quantity limitations, and vessel stowage requirements and determined that the revised standards provide an enhanced level of safety without imposing significant compliance burdens. These standards have a well-established and documented safety history; their adoption will maintain the high safety standard currently achieved under the HMR. Therefore, we are adding and revising the incorporation by reference materials under the following organizations: The International Civil Aviation Organization (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air, 2011- 2012 Edition is revised to incorporate the 2013-2014 Edition. The International Convention for the Safety of Life at Sea (SOLAS) Amendments 2002, Chapter II-2/Regulation 19, Consolidated Edition 2004 is revised to incorporate the 2009 Consolidated Edition. The International Electrotechnical Commission (IEC) Fuel cell technologies--Part 6-1: Micro fuel cell power systems--Safety, IEC/PAS 62282-6-1:2006(E), First Edition 2006-02, with Corrigendum 1, First Edition 2007-04 is removed and replaced with Fuel cell technologies-- Part 6-100: Micro fuel cell power systems--Safety, IEC 62282-6- 100:2010, Edition 1.0, March 2010 and Amendment 1 to IEC 62282-6-100, October 12, 2012. FCHEA requested we incorporate the recently approved Amendment 1 to the International Electrotechnical Commission standard for micro-fuel cell cartridges as well as a request for a slight alteration in the way we reference the document. In this final rule we will incorporate by reference amendment 1 to the IEC international standard and change the wording used to reference the document. The International Maritime Organization (IMO) International Maritime Dangerous Goods Code, 2010 Edition, Incorporating Amendment 35-10, English Edition, Volumes 1 and 2 is revised to incorporate the 2012 Edition, Amendment 36-12. The International Organization for Standardization (ISO) entries for ``ISO 10156:1996, Gases and Gas Mixtures--Determination of fire potential and oxidizing ability for the selection of cylinder valve outl#

Passage 15ets, Second edition, February 1996 (E)'' and ``ISO 10156-2:2005, Gas cylinders--Gases and gas mixtures--Part 2: Determination of oxidizing ability of toxic and corrosive gases and gas mixtures, First edition, August 2005, (E)'' are removed and replaced with an entry for ``ISO 10156:2010: Gases and gas mixtures--Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets, Third edition, March 2010.'' The entry ``ISO 4126-1: Safety valves--Part 1: General requirements, December 15, 1991, First edition'' is revised to the entry ``ISO 4126-1:2004(E): Safety devices for protection against excessive pressure--Part 1: Safety valves, Second edition 2004-02-15.'' The entry ``ISO 11117, Gas cylinders--Valve protection caps and valve guards for industrial and medical gas cylinders--Design, construction and tests, First edition, August 1998, (E)'' is revised to the entry ``ISO 11117:2008(E): Gas cylinders--Valve protection caps and valve guards--Design, construction and tests, Second edition, 2008-09-01.'' The entry ``ISO 11117:2008/Cor.1:2009(E): Gas cylinders--Valve protection caps and valve guards--Design, construction and tests, Technical Corrigendum 1, 2009-05-01'' is added. The entries ``ISO 4126-7:2004(E): Safety devices for protection against excessive pressure--Part 7: Common data, First Edition 2004-02- 15,'' ``ISO 4126-7:2004/Cor.1:2006(E): Safety devices for protection against excessive pressure--Part 7: Common data, Technical Corrigendum 1, 2006-11-01,'' and ``ISO 13340:2001(E) Transportable gas cylinders-- Cylinder valves for non-refillable cylinders--Specification and prototype testing, First edition, 2004-04-01'' are added. The Transport Canada entry, Transportation of Dangerous Goods Regulations, including Clear Language Amendments 1 through 7 is revised to include Amendments 8, 9 and 10. The United Nations Recommendations on the Transport of Dangerous Goods--Model Regulations, 16th Revised Edition (2009), Volumes I and II, is revised to incorporate the 17th#

Passage 16Revised Edition (2011), Volumes I and II. The United Nations Recommendations on the Transport of Dangerous Goods--Manual of Tests and Criteria, Fifth Revised Edition (2009), is revised to incorporate Amendment 1 (2011). One commenter (DGAC) requested that we do not require compliance with the lithium battery testing requirements contained in Amendment 1 for lithium cells and batteries manufactured before January 1, 2014. Since PHMSA has specified a delayed compliance date of January 1, 2014 for this final rule, compliance with Amendment 1 will only be required for lithium cells and batteries manufactured on or after January 1, 2014. In addition to the revisions and additions above, PHMSA is restructuring Sec. 171.7 to comply with National Archives and Records Administration requirements for centralized IBR section formatting. This change is not intended to remove or change any IBR materials previously incorporated by reference, with the exception of those references mentioned above. Section 171.8 This section defines terms generally used throughout the HMR that have broad or multi-modal applicability. PHMSA is adding the following defined terms: Aircraft battery: This term means a battery designed in accordance with a recognized aircraft battery design standard (e.g. FAA technical standard order) that is capable of meeting all aircraft airworthiness requirements and operating regulations. Currently the HMR does not define aircraft battery. The recent amendment of special provision A51 in the ICAO TI require PHMSA to define this term to ensure appropriate application of this special provision. Flexible Bulk Container (FBC): This term means a flexible container with a capacity not exceeding 15 cubic meters and includes liners and attached handling devices and service equipment. Currently the HMR do not prescribe requirements for the transport of FBCs. In this final rule, PHMSA is adopting various transportation and manufacturing requirements for FBCs. Prior to adoption of such standards, the term ``Flexible Bulk Container'' must be defined. Therefore we are adopting the above definition of an FBC based on the definition for FBC adopted in the IMDG Code and 17th Revised Edition of the UN Model Regulations.#

Passage 17Section 172.101 Section 172.101 provides instructions for using the Hazardous Materials Table (HMT) and the HMT itself. In this final rule, PHMSA is revising the instructional text that precedes the HMT. Paragraph (c) of Sec. 172.101 describes the information indicated in column 2 of the HMT. Column 2 lists the hazardous materials descriptions and proper shipping names of materials designated as hazardous materials. Paragraph (c)(10) of Sec. 172.101 prescribes how mixtures or solutions not identified specifically by name are described. PHMSA is revising Sec. 172.101(c)(10) to incorporate language adopted in the 17th Revised Edition of the UN Model Regulations that states mixtures and solutions must meet the definition of one or more hazard classes to be classified as a hazardous material. This change will clarify that for a mixture or solution composed of one or more components that are classified as a hazardous material, the resulting mixture or solution must meet the definition of one or more hazard classes to be classified as a hazardous material. Paragraph (k) of Sec. 172.101explains the purpose of column (10) of the HMT and prescribes the vessel stowage and segregation requirements for specific entries in the HMT. Column (10) is divided into two columns: column (10A) [Vessel stowage] specifies the authorized stowage locations on board cargo and passenger vessels and column (10B) [Other provisions] specifies special stowage and segregation provisions. We are modifying these instructions by revising the vessel stowage location requirements for explosives and reducing the number of explosive stowage categories from 15 to 5. Specifically, the explosive stowage categories 6 through 15 will be eliminated and stowage categories 1 through 5 will be modified. Changes to the explosive stowage categories are necessary because, as part of this final rule, PHMSA is removing magazine stowage Types ``A,'' ``C,'' and special stowage from Part 176 with the consolidation of authorized explosive stowage categories. The authorized explosive stowage categories will be replaced with a new term of art ``Closed cargo transport units for Class 1 (explosives).'' Included in this definition are freight containers or transport vehicles that are structurally serviceable in accordance withSec. 176.172, portable magazines conforming to Sec. 176.137, and small vessel compartments (i.e#

Passage 18., mast lockers and deck house). These changes will require Class 1 materials to be shipped in closed cargo transport units as defined above when stowed on deck. Hazardous Materials Table (HMT) In this final rule, PHMSA is amending the HMT. Readers should review all changes for a complete understanding of the amendments. For purposes of the Government Printing Office's typesetting procedures, changes to the HMT appear under three sections of the Table, ``remove,'' ``add,'' and ``revise.'' Certain entries in the HMT, such as those with revisions to the proper shipping names, appear as a ``remove'' and ``add.'' Amendments to the HMT include the following: New HMT Entries. UN3497 Krill meal This new HMT entry is created because krill meal has a chemical composition that is significantly different from that of fish meal. It contains a natural stabilizing substance (ethoxyquin) and the fat content of krill meal is higher than that of fish meal. The UN numbers established for fish meal are restricted to maximum fat contents, which makes these UN numbers not applicable to krill meal. UN3498 Iodine monochloride, liquid This new HMT entry is a result of the division of the proper shipping name Iodine monochloride into two authorized proper shipping names; one for the liquid state of the commodity and another for the solid state. Solid shipments of Iodine monochloride remain assigned to UN1792. UN3499 Capacitor, electric double layer (with an energy storage capacity greater than 0.3 Wh) This new HMT entry covers capacitors with an energy storage capacity greater than 0.3 Wh. Capacitors are assigned as a Class 9 miscellaneous hazardous material and measures required to prevent short circuit are provided in special provision 361. UN3500 Chemical under pressure, n.o.s. UN3501 Chemical under pressure, flammable, n.o.s. UN3502 Chemical under pressure, toxic, n.o.s. UN3503 Chemical under pressure, corrosive, n.o.s. UN3504 Chemical under pressure, flammable, toxic, n.o.s. UN3505 Chemical under pressure, flammable, corrosive, n.o.s. The ``Chemical under pressure. n.o.s.'' HMT entries are added to address shipments of liquids or solids (e.g.,#

Passage 19adhesives, coatings, and cleaners) combined with a gas or gas mixtures utilized to expel the contents from pressure vessels. The primary hazard class for these shipments is determined by the hazard presented by the propellant and any subsidiary risk is determined by the properties of the liquid or solid under pressure. Toxic gases are not permitted as propellants. UN3506 Mercury contained in manufactured articles This new entry was created to separately address manufactured articles containing mercury. The international community provided an exception from regulation for instruments and articles containing not more than 1 kg of mercury, when transported by means other than aircraft. PHMSA is unable to adopt a comparable exception as the reportable quantity for mercury is 0.454 kg (1.00 lbs.), but is revising the current exception authorized in Sec. 173.164(e) for shipments containing less than 0.454 kg (1.00 pound) to include transportation by vessel. UN1950 Aerosols, corrosive, Packing Group II or III (each not exceeding 1 L capacity). This new entry was inadvertently removed from the HMT due to an incorrect amendatory instruction in a September 13, 2011 final rule (76 FR 56304; HM-244D). The entry is being placed back into the HMT. Removed HMT Entries UN3492 Toxic by inhalation liquid, corrosive, flammable, n.o.s. with an inhalation toxicity lower than or equal to 200 ml/m3 and saturated vapor concentration greater than or equal to 500 LC50 UN3493 Toxic by inhalation liquid, corrosive, flammable, n.o.s. with an inhalation toxicity lower than or equal to 1000 ml/m3 and saturated vapor concentration greater than or equal to 10 LC50#

Passage 20These entries are removed from the HMT due to their similarity to UN3488 and UN3489 respectively. The sole difference between these entries is the order of subsidiary risks, which does not affect the classification and transport conditions applied to shipments of these substances. As a result, PHMSA is removing identification numbers UN3492 and UN3493 to avoid confusing shippers in determining which identification numbers to use. Amendments to the Column (1) Symbols Section 172.101(b) describes column (1) of the HMT and the associated symbols that may be indicated in the column. In accordance with Sec. 172.101(b), the symbol ``G'' identifies proper shipping names for which one or more technical names of the hazardous material must be entered in parentheses in association with the basic description on a shipping paper. In this final rule, PHMSA is adding a ``G'' to column (1) for ``UN1707, Thallium compounds, n.o.s.'' The addition of a ``G'' to this entry will provide notification of the technical name of this toxic material and thus aid emergency responders with providing an appropriate response. Amendments to the Column (2) Hazardous Materials Descriptions and Proper Shipping Names Section 172.101(c) describes column (2) of the HMT and the requirements for hazardous materials descriptions and proper shipping names. Among other requirements, in accordance with Sec. 172.101(c)(1), proper shipping names indicated in column (2) of the HMT may be used in the singular or the plural form interchangeably. Regardless, in this final rule, PHMSA is revising several entries in the HMT to remove the plural ending letter ``s'' to provide continuity with the internationally accepted proper shipping names. Specifically, PHMSA is removing the letter ``s'' from: UN1107, Amyl chlorides; UN1111, Amyl mercaptans; UN1113, Amyl nitrites; and, UN2347, Butyl Mercaptans. Generally the physical state (solid or liquid) appears before the hazard characteristics (toxic, flammable, etc.) in the sequence of wording used in proper shipping names specified in column (2) of the HMT. In some instances, the hazard characteristics are indicated before the physical state. In this final rule, PHMSA is revising several proper shipping names to indicate the physical state before the hazard characteristics for consistency in formatting. Current proper shipping names:#

Passage 21------------------------------------------------------------------------ UN No. Proper shipping name ------------------------------------------------------------------------ 3276...................................... Nitriles, toxic, liquid, n.o.s. 3278...................................... Organophosphorus compound, toxic, liquid, n.o.s. 3282...................................... Organometallic compound, toxic, liquid, n.o.s. 3439...................................... Nitriles, toxic, solid, n.o.s. 3464...................................... Organophosphorus compound, toxic, solid, n.o.s. 3467...................................... Organometallic compound, toxic, solid, n.o.s. ------------------------------------------------------------------------ ------------------------------------------------------------------------ UN No. Proper shipping name ------------------------------------------------------------------------ 3276...................................... Nitriles, liquid, toxic, n.o.s. 3278...................................... Organophosphorus compound, liquid, toxic, n.o.s. 3282...................................... Oranometallic compound, liquid, toxic, n.o.s. 3439...................................... Nitriles, solid, toxic, n.o.s. 3464...................................... Organophosphorus compound, solid, toxic, n.o.s. 3467...................................... Organometallic compound, solid, toxic, n.o.s. ------------------------------------------------------------------------#

Passage 22A new proper shipping name ``Cartridges for tools, blank'' is assigned to identification number UN0014. This proper shipping name more appropriately describes industrial blank cartridges currently described as ``UN0323, Cartridges, power device'' or ``ORM-D or ORM-D- AIR, Cartridges, power device (used to project fastening devices).'' In the NPRM, PHMSA proposed to remove the ``ORM-D'' entry for ``Cartridges, power device (used to project fastening devices)'' because the proper shipping name for such articles is now ``Cartridges for tools, blank'' under identification number UN0014. Subsequent changes were proposed to Sec. 173.63 and the Sec. 172.102(c)(1) special provision 347 to replace any references to ``ORM-D or ORM-D- AIR, Cartridges, power device (used to project fastening devices)'' with the new description ``UN0014, Cartridges for tools, blank (used to project fastening devices).'' Additionally, such articles are not subject to the UN Test Series 6(d) previously required under special provision 347. The description ``UN0323, Cartridges, power device'' will remain subject to special provision 347. PHMSA received one comment from SAAMI noting that the proposed domestic only entry for Cartridges for tools, blank (used to project fastening devices) was unnecessary and should be deleted. SAAMI also asked for the retention of the ORM-D entry for Cartridges, power device until the end of the transition period for its use. SAAMI raised concerns over packaging manufactured and marked to meet current HMR requirements. SAAMI stated that existing packaging inventory will be depleted during 2013, but industry will not be ready to stop using#

Passage 23the old markings for ORM-D ``Cartridges, power device'' on January 1, 2013, and that HM-215K provided a deadline of December 31, 2013 to accomplish this transition. PHMSA agrees and is retaining the entry Cartridges power device (used to project fastening devices) and will not be adopting a domestic only entry for Cartridges for tools, blank. The proper shipping name for ``UN1305, Vinyltrichlorosilane, stabilized'' is amended by removing the term ``stabilized'' for consistency with the Dangerous Goods Lists of the various international standards and the HMT of the HMR. The revised proper shipping name for UN1305 is ``Vinyltrichlorosilane.'' The 17th Revised Edition of the UN Model Regulations amended the qualifying text (text in italics) for UN Nos. 3381-3390 and UN Nos. 3488-3491. The changes to these entries' qualifying or modifying text in italics would change the wording from ``with an inhalation toxicity lower than or equal to'' to ``with an LC50 lower than or equal to.'' This terminology change better identifies the criteria used to determine the proper classification of these substances. Amendments to the Column (4) Identification Numbers Section 172.101(e) describes Column (4) of the HMT and the designation of the identification number to each proper shipping name. With the addition of a separate identification number (UN3506) for the description ``Mercury contained in manufactured articles,'' PHMSA is removing the description that is currently assigned to ``UN2809, Mercury.'' Amendments to the Column (6) Label(s) Section 172.101(g) describes Column (6) of the HMT and the labels required (primary and subsidiary) for specific entries in the HMT. Data presented to the UN Committee of Experts on the Transport of Dangerous Goods (UNCOE) in this last biennium indicated a need for the addition of subsidiary risk of Division 6.1 (toxic) to be assigned to ``UN2809, Mercury'' and to the new entry ``UN3506, Mercury contained in manufactured articles.'' We note that for air transport, Special provision A191 provides relief from the labeling and documentation requirements of this new subsidiary risk. In addition to the changes above, data was also presented to the UNCOE that indicated the need for a subsidiary risk of Division 6.1 (toxic) to be assigned to UN2381 Dimethyl disulfide. PHMSA is making appropriate amendments to the HMT to account for these revisions#

Passage 24to the UN Model Regulations. Amendments to the Column (7) Special Provisions Section 172.101(h) describes Column (7) of the HMT and the Sec. 172.102(c) Special provisions assigned to specific entries in the HMT. The particular modifications to the entries in the HMT are discussed below. See Section 172.102 special provisions for a detailed discussion of the additions, revisions, and deletions to the special provisions addressed in this final rule. Several HMT entries are revised to include special provision B120. Special provision B120 indicates that the material, when offered in conformance with the applicable requirements of Part 178 and general packaging requirements in Part 173, may be offered for transportation in a Flexible Bulk Container. See Section 172.102 special provisions for a detailed discussion of special provision B120. In this final rule, special provision B120 is assigned to the following entries: ------------------------------------------------------------------------ Proper shipping name UN No. ------------------------------------------------------------------------ Naphthalene, crude or Naphthalene, refined............ UN1334 Sulfur (domestic and international entries)........... UN1350 Calcium nitrate....................................... UN1454 Magnesium nitrate..................................... UN1474 Potassium nitrate..................................... UN1486 Sodium nitrate........................................ UN1498 Sodium nitrate and potassium nitrate mixtures......... UN1499 Ammonium nitrate, with not more than 0.2% total UN1942 combustible material, including any organic substance, calculated as carbon to the exclusion of any other added substance............................ Ammonium nitrate based fertilizer..................... UN2067 Paraformaldehyde...................................... UN2213 Environmentally hazardous substance, solid, n.o.s..... UN3077 Sodium perborate monohydrate.......................... UN3377 Sodium carbonate peroxyhydrate........................ UN3378 ------------------------------------------------------------------------#

Passage 25New special provision 222 is added to the ORM-D entries for Cartridges, small arms, and Cartridges power device (used to project fastening devices). See Section 172.102 Special provisions for a detailed discussion of the addition of special provision 222. The entry for UN1008 Boron trifluoride is assigned new special provision 238. See Section 172.102 Special provisions for a detailed discussion of the addition of special provision 238. Special provision A51 is added to authorize the transport of aircraft batteries consistent with the provisions of the 2013-2014 ICAO Technical Instructions. The portable tank code assigned to ``UN 1203, Gasoline'' was inadvertently changed from T4 to T8 in a rulemaking under Docket Number PHMSA-2009-0151 (HM-218F) [76 FR 43510]. As this was an inadvertent, but consequential change, PHMSA is amending the entry for Gasoline to indicate T4 as the appropriate portable tank code. With the addition of a Division 6.1 (toxic) subsidiary risk to ``UN2381, Dimethyl disulfide,'' the portable tank codes and portable tank provisions are revised as follows: T4 is replaced by T7 TP1 is replaced by TP2, TP13, and TP39 See Section 172.102 Special provisions for a detailed discussion of our addition of special provision TP39. Review of the ``Guiding Principles for the Development of the UN Model Regulations (Guiding Principles)'' indicates that in some cases, the portable tank instructions for the transport of Division 4.3 liquid materials are not consistent with the Guiding Principles, and, in other instances, relevant portable tank special provisions were missing or incorrectly assigned. The following are revisions with deletions indicated by a strikethrough and additions or replacements shown in bold font. [GRAPHIC] [TIFF OMITTED] TR07JA13.000#

Passage 26See Section 172.102 Special provisions for a detailed discussion of the addition of special provision TP41. Special provisions A100 and A103 are revised to clarify that the weight (mass) limitations specified are net and not gross amounts for secondary lithium batteries. See Section 172.102 Special provisions for a detailed discussion of the revision of special provisions A100 and A103. Special provision A191 is added to note that regardless of the Division 6.1 (toxic) subsidiary risk indicated in the HMT, the toxic subsidiary risk label and an indication of the subsidiary risk on the shipping paper are not required for manufactured articles containing less than 5 kg (11 pounds) of mercury. This special provision is assigned to the entry ``UN3506, Mercury contained in manufactured articles.'' Special provision A200 is added to require that certain articles may not be transported by passengers or crewmembers, on their person or in their baggage and are to be shipped as cargo when transported via aircraft. Under certain circumstances, the articles affected by this special provision may be excepted from the requirements of the HMR. When these articles are not subject to the regulations, there is the potential for them to be inappropriately carried aboard an aircraft. In response to this safety concern, the ICAO Technical Instructions were revised to clarify that when transported by aircraft, these articles, regardless of whether they are otherwise excepted from the regulations, must be transported as cargo and may not be carried onboard an aircraft by passengers or crewmembers in carry-on baggage, checked baggage, or on their person unless specifically excepted by Sec. 175.10, ``Exceptions for Passengers, Crewmembers, and Air Operators.'' Consistent with the revised ICAO Technical Instructions requirement, PHMSA is adopting the special provision restricting these items from being carried aboard an aircraft by passengers and crewmembers. This special provision is assigned to the following entries: ``UN3166, Engines, internal combustion or Engines, fuel cell, flammable gas powered''; ``UN3166, Engines, internal combustion or Engines, fuel cell, flammable liquid powered''; ``UN3166, Vehicle, flammable gas powered or Vehicle, fuel cell, flammable gas powered''; ``UN3166, Vehicle, flammable liquid powered or Vehicle, fuel cell, flammable liquid powered''; ``UN0503,#

Passage 27Air bag inflators or Air bag modules or Seat-belt pretensioners''; and ``UN3268, Air bag inflators or Air bag modules or Seat-belt pretensioners.'' Special provision W10 is assigned to ``UN3486, Calcium hypochlorite mixture, dry, corrosive with more than 10% but not more than 39% available chlorine'' and to ``UN2208, Calcium hypochlorite mixtures, dry, with more than 10 percent but not more than 39 percent available chlorine.'' Special provision W10 indicates that, when offered for transportation by vessel, these entries may not be offered in large packagings. See Section 172.102 Special provisions for a detailed discussion of the addition of special provision W10. Amendments to the Column (8a) Packaging Exceptions Column 8A contains exceptions from some of the requirements of this subchapter. The referenced exceptions are in addition to those specified in subpart A of part 173 and elsewhere in this subchapter. A ``None'' in this column means no packaging exceptions are authorized, except as may be provided by special provisions in Column 7. PHMSA received one comment from SAAMI noting that PHMSA, unlike the UN Model Regulations, IMDG Code and the European Road and Rail Regulations (ADR), did not propose a limited quantity exception for UN 0055 ``Cases, cartridge, empty with primer'' as a limited quantity. This was an inadvertent omission and PHMSA is adding 63 to column 8a of the HMT for the UN 0055 entry. Amendments to the Column (9) Quantity Limitations Section 172.101(j) describes Column (9) of the HMT and the quantity limitations for specific entries in the HMT. Furthermore, Columns (9A) and (9B) specify the maximum quantities that may be offered for transportation in one package by passenger-carrying aircraft or passenger-carrying rail car (Column (9A)) or by cargo-only aircraft (Column (9B)). Unless otherwise indicated the quantity limitations shown in column (9) of the HMT are net. PHMSA is removing the gross weight indicator in columns (9A) (if authorized previously) and (9B) for the following battery entries. The quantity limit for these entries should be based on the weight of the battery or batteries and not the weight of the battery or batteries plus the packaging (i.e., the package).#

Passage 28UN3028 Batteries, dry, containing potassium hydroxide solid, electric, storage UN2794 Batteries, wet, filled with acid, electric storage UN2795 Batteries, wet, filled with alkali, electric storage UN3468 Hydrogen in a metal hydride storage system or Hydrogen in a metal hydride storage system contained in equipment or Hydrogen in a metal hydride storage system packed with equipment UN3090 Lithium battery UN3091 Lithium batteries packed with equipment PHMSA is revising column (9A) to forbid several entries previously authorized for shipment on passenger-carrying aircraft or passenger- carrying rail to harmonize with changes to the ICAO Technical Instructions. The following entries would now be forbidden on passenger-carrying aircraft or passenger-carrying rail. UN1196 Ethyltrichlorosilane UN1250 Methyltrichlorosilane UN1298 Trimethylchlorosilane UN1305 Vinyltrichlorosilane UN2985 Chlorosilanes, flammable, corrosive, n.o.s. UN3361 Chlorosilanes, toxic, corrosive, n.o.s. UN3362 Chlorosilanes, toxic, corrosive, flammable, n.o.s.#

Passage 29Quantity limits of 450 L for ``UN3334, Aviation regulated liquid, n.o.s.'' and 400 kg for ``UN3335, Aviation regulated solid, n.o.s.'' are added for both columns (9A) and (9B). Previously, there was no limit to the amount authorized to be shipped in one package. These new quantity limits are consistent with authorized quantity limits found in the ICAO Technical Instructions. Amendments to the Column (10) Vessel Stowage Requirements. Vessel Stowage Location (10A) Section 172.101(k) explains the purpose of column (10) of the HMT and prescribes the vessel stowage and segregation requirements for specific entries in the HMT. Column (10) is divided into two columns: column (10A) [Vessel stowage] specifies the authorized stowage locations on board cargo and passenger vessels and column (10B) [Other provisions] specifies special stowage and segregation provisions. One commenter (SAAMI) noted that limited quantity shipments are assigned the least restrictive stowage category and are excepted from additional stowage provisions in 3.4.3 of the IMDG Code and requested that PHMSA do the same. PHMSA agrees and is amending Sec. 172.101(k) to ensure that shipments offered as limited quantities are allocated to stowage category A, and to note that such shipments are excepted from the other stowage provisions indicated by codes in column 10B of the HMT for the material being offered for transport as a limited quantity. PHMSA is simplifying the number of vessel stowage locations for shipments of Class 1 explosive materials to harmonize with recently adopted vessel explosive stowage categories in the IMDG Code. Currently, there are 15 possible stowage location codes available for assignment to column (10A) for explosive shipments. Recent changes in the IMDG Code have reduced the number of available explosive stowage location codes to five. This consolidation of codes was accomplished to reduce the complexity of the regulations without compromising safety. The International Maritime Organization (IMO) determined that the term ``magazine'' was no longer necessary and the magazine concept could be incorporated into a broader definition for closed cargo transport units for Class 1 (explosives) material. In general, a magazine used to store and transport explosives is equivalent to a closed cargo transport unit with a wooden floor. A magazine type A has additional wooden walls, or#

Passage 30walls covered with wooden pallets, and is currently only assigned to 7 entries in the HMT. A magazine type C is currently defined by a minimum distance to the ship's side of 2.4 m (8 feet). Requirements to load Class 1 closed cargo transport units a minimum distance of 2.4 m (8 feet) from the ship's side wall remove the need for specific stowage category references to magazine stowage type C. The IMO, taking into account the properties of various classes and divisions of explosives, has determined that only 1.4S, 1.4G, 1.4D, and 1.4C explosives are acceptable on passenger ships. PHMSA agrees and has removed the majority of Class 1 stowage location codes and revised the remaining codes. The codes for each Class 1 entry are grouped by stowage code (01, 02, 03, 04, or 05) as follows: Explosive Stowage Category 01--means the material may be stowed ``on deck'' in closed cargo transport units or ``under deck'' on a cargo vessel (up to 12 passengers) and on a passenger vessel 02--means the material may be stowed ``on deck'' in closed cargo transport units or ``under deck'' on a cargo vessel (up to 12 passengers) and ``on deck'' in closed cargo transport units or ``under deck'' in closed cargo transport units on a passenger vessel 03--means the material may be stowed ``on deck'' in closed cargo transport units or ``under deck'' on a cargo vessel (up to 12 passengers) but the material is prohibited on a passenger vessel 04--means the material may be stowed ``on deck'' in closed cargo transport units or ``under deck'' in closed cargo transports on a cargo vessel (up to 12 passengers) but the material is prohibited on a passenger vessel 05--means the material may be stowed ``on deck'' in closed cargo transport units on a cargo vessel (up to 12 passengers) but the material is prohibited on a passenger vessel Taking into account the properties of various classes and divisions of explosives, the IMO determined new stowage category assignments as follows:#

Passage 31------------------------------------------------------------------------ Stowage Division category ------------------------------------------------------------------------ 1.1A....................................................... 05 1.1B....................................................... 05 1.2B....................................................... 05 1.4B....................................................... 05 1.1C....................................................... 04 1.2C....................................................... 04 1.3C....................................................... 04 1.4C....................................................... 02 1.1D....................................................... 04 1.2D....................................................... 04 1.4D....................................................... 02 1.5D....................................................... 03 1.1E....................................................... 04 1.2E....................................................... 04 1.4E....................................................... 03 1.1F....................................................... 05 1.2F....................................................... 05 1.3F....................................................... 05 1.4F....................................................... 05 1.1G....................................................... 03 1.2G....................................................... 03 1.3G....................................................... 03 1.4G....................................................... 02 1.2H....................................................... 05 1.3H....................................................... 05 1.1J....................................................... 05 1.2J....................................................... 05 1.3J....................................................... 05 1.2K....................................................... 05 1.3K....................................................... 05 1.1L....................................................... 05 1.2L....................................................... 05 1.3L....................................................... 05 1.6N....................................................... 03 1.4S....................................................... 01 -----------------------#

Passage 32------------------------------------------------- PHMSA agrees with the assignments and, in particular, agrees that only 1.4S, 1.4G, 1.4D, and 1.4C explosives are acceptable on passenger ships. Column (10A) in the HMT is revised to read Stowage Category 01 for the following proper shipping names and corresponding identification numbers: ------------------------------------------------------------------------ Proper shipping name Un No. Proper shipping name Un No. ------------------------------------------------------------------------ Articles, explosive, n.o.s.. UN0349 Fuse, safety........ UN0105 Articles, pyrotechnic for UN0432 Fuzes, detonating... UN0367 technical purposes. Cartridges, power device.... UN0323 Fuzes, igniting..... UN0368 Cartridges, signal.......... UN0405 Grenades, practice, UN0110 hand or rifle. Cartridges for weapons, UN0014 Igniters............ UN0454 blank or Cartridges, small arms, blank or Cartridges for tools, blank. Cartridges for weapons, UN0012 Lighters, fuse...... UN0131 inert projectile or Cartridges, small arms. Cases, cartridge, empty with UN0055 Primers, cap type... UN0044 primer. Charges, bursting, plastics UN0460 Primers, tubular.... UN0376 bonded. Charges, explosive, UN0445 Projectiles, inert UN0345 commercial without with tracer. detonator. Charges, shaped, without UN0441 Release devices, UN0173 detonator. explosive. Components, explosive train, UN0384 Rivets, explosive... UN0174 n.o.s.. Cutters, cable, explosive... UN0070 Signal devices, hand UN0373 Detonator assemblies, non- UN0500 Signals, distress, UN0506 electric, for blasting. ship. Detonators for ammunition... UN0366 Signals, railway UN0193 track, explosive. Detonators, electric for UN0456 Signals, smoke...... UN0507 blasting. Detonators, non-electric for UN0455 Substances, UN0481 blasting. explosive, n.o.s.. Fireworks................... UN0337 Toy Caps............ NA0337 Flares, aerial.............. UN0404 .................... ......... ------------------------------------------------------------------------ Column (10A) in the HMT is revised to read Stowage Category 02 for the following proper shipping names and corresponding identification numbers:#

Passage 33------------------------------------------------------------------------ Proper shipping name UN No. Proper shipping name UN No. ------------------------------------------------------------------------ 5-Mercaptotetrazol-1-acetic UN0448 Flares, aerial...... UN0403 acid. Air bag inflators, or Air UN0503 Fuse, igniter UN0103 bag modules, or Seat-belt tubular metal clad. pretensioners. Ammunition, illuminating UN0297 Fuzes, detonating, UN0410 with or without burster, with protective expelling charge or features. propelling charge. Ammunition, incendiary with UN0300 Fuzes, igniting..... UN0317 or without burster, expelling charge or propelling charge. Ammunition, practice........ UN0362 Grenades practice, UN0452 hand or rifle. Ammunition, proof........... UN0363 Igniters............ UN0325 Ammunition, smoke with or UN0303 Jet perforating NA0494 without burster, expelling guns, charged oil charge or propelling charge. well, with detonator. Ammunition, tear-producing UN0301 Jet perforating UN0494 with burster, expelling guns, charged, oil charge or propelling charge. well, without detonator. Articles, explosive, n.o.s.. UN0351 Powder, smokeless... UN0509 Articles, explosive, n.o.s.. UN0352 Primers, tubular.... UN0320 Articles, explosive, n.o.s.. UN0353 Projectiles, inert, UN0425 with tracer. Articles, explosive, n.o.s.. UN0354 Projectiles, with UN0347 burster or expelling charge. Articles, pyrotechnic for UN0431 Projectiles, with UN0435 technical purposes. burster or expelling charge. Cartridges for weapons, UN0338 Projectiles, with UN0344 blank or Cartridges, small bursting charge. arms, blank. Cartridges for weapons, UN0339 Propellant, solid... UN0501 inert projectile or Cartridges, small arms. Cartridges, oil well........ UN0278 Rockets, line- UN0453 throwing. Cartridges, power device.... UN0276 Rockets, with UN0438 expelling charge. Cartridges, signal.......... UN0312 Rockets, with inert UN0502 head. Cases, cartridges, empty UN0379 Signal devices, hand UN0191 with primer. Cases, combustible, empty, UN0446 Signals, distress, UN0505 without primer. ship.#

Passage 34Charges, bursting, plastics UN0459 Signals, railway UN0493 bonded. track, explosive. Charges, explosive, UN0444 Signals, smoke...... UN0197 commercial without detonator. Charges, propelling......... UN0491 Substances, UN0479 explosive, n.o.s.. Charges, shaped, flexible, UN0237 Substances, UN0480 linear. explosive, n.o.s.. Charges, shaped, without UN0440 Substances, UN0485 detonator. explosive, n.o.s.. Cord, detonating, flexible.. UN0289 Tetrazol-1-acetic UN0407 acid. Cord, detonating, mild UN0104 Tracers for UN0306 effect or Fuse, detonating, ammunition. mild effect metal clad. Cord, igniter............... UN0066 Warheads, rocket UN0370 with burster or expelling charge. Fireworks................... UN0336 .................... ......... ------------------------------------------------------------------------ Column (10A) in the HMT is revised to read Stowage Category 03 for the following proper shipping names and corresponding identification numbers:#

Passage 35------------------------------------------------------------------------ Proper shipping name UN No. Proper shipping name UN No. ------------------------------------------------------------------------ Ammonium nitrate-fuel oil NA0331 Flares, aerial...... UN0421 mixture containing only prilled ammonium nitrate and fuel oil. Ammunition, illuminating UN0171 Flares, surface..... UN0092 with or without burster, expelling charge or propelling charge. Ammunition, illuminating UN0254 Flares, surface..... UN0418 with or without burster, expelling charge or propelling charge. Ammunition, incendiary with UN0009 Flares, surface..... UN0419 or without burster, expelling charge, or propelling charge. Ammunition, incendiary with UN0010 Flash powder........ UN0094 or without burster, expelling charge, or propelling charge. Ammunition, practice........ UN0488 Flash powder........ UN0305 Ammunition, smoke with or UN0015 Fuse, non-detonating UN0101 without burster, expelling instantaneous or charge or propelling charge. quickmatch. Ammunition, smoke with or UN0016 Fuzes, igniting..... UN0316 without burster, expelling charge or propelling charge. Ammunition, tear-producing UN0018 Grenades, practice, UN0318 with burster, expelling hand or rifle. charge or propelling charge. Ammunition, tear-producing UN0019 Grenades, practice, UN0372 with burster, expelling hand or rifle. charge or propelling charge. Articles, explosive, UN0486 Igniters............ UN0121 extremely insensitive or Articles, EEI. Articles, explosive, n.o.s.. UN0471 Igniters............ UN0314 Articles, pyrotechnic for UN0428 Igniters............ UN0315 technical purposes. Articles, pyrotechnic for UN0429 Primers, tubular.... UN0319 technical purposes. Articles, pyrotechnic for UN0430 Projectiles, inert, UN0424 technical purposes. with tracer. Bombs, photo-flash.......... UN0039 Projectiles, with UN0434 burster or expelling charge. Bombs, photo-flash.......... UN0299 Rockets, line- UN0238 throwing. Cartridges for weapons, with UN0412 Rockets, line- UN0240 bursting charge. throwing. Cartridges, flash........... UN0049 Signals, distress, UN0194 ship. Cartridges, flash........... UN0050 Signals, distress, UN0195 ship. Cartridges, signal.......... UN0054 Signals, railway UN0192 track, explosive. Explosive, blasting, type B UN0331 Signals, railway UN0492 or Agent blasting, Type B. track, explosive. Explosive, blasting#

Passage 36, type E UN0332 Signals, smoke...... UN0196 or Agent blasting, Type E. Fireworks................... UN0333 Signals, smoke...... UN0313 Fireworks................... UN0334 Signals, smoke...... UN0487 Fireworks................... UN0335 Substances, UN0476 explosive, n.o.s.. Flares, aerial.............. UN0093 Substances, UN0478 explosive, n.o.s.. Flares, aerial.............. UN0420 Substances, UN0482 explosive, very insensitive, n.o.s. or Substances, EVI, n.o.s.. ......... Tracers for UN0212 ammunition. ------------------------------------------------------------------------ Column (10A) in the HMT is revised to read Stowage Category 04 for the following proper shipping names and corresponding identification numbers: ------------------------------------------------------------------------ Proper shipping name UN No. Proper shipping name UN No. ------------------------------------------------------------------------ 1H-Tetrazole................ UN0504 Hexolite, or Hexotol UN0118 dry or wetted with less than 15 percent water, by mass. 1-Hydroxybenzotriazole, UN0508 Hexotonal........... UN0393 anhydrous, dry or wetted with less than 20 percent water, by mass. 5-Nitrobenzotriazol......... UN0385 Jet perforating NA0124 guns, charged oil well, with detonator.#

Passage 37Ammonium nitrate, with more UN0222 Jet perforating UN0124 than 0.2 percent guns, charged oil combustible substances, well, without including any organic detonator. substance calculated as carbon, to the exclusion of any other added substance. Ammonium perchlorate........ UN0402 Mannitol UN0133 hexanitrate, wetted or Nitromannite, wetted with not less than 40 percent water, or mixture of alcohol and water, by mass. Ammonium picrate, dry or UN0004 Mines with bursting UN0137 wetted with less than 10 charge. percent water, by mass. Articles, explosive, n.o.s.. UN0462 Mines with bursting UN0138 charge. Articles, explosive, n.o.s.. UN0463 Nitro urea.......... UN0147 Articles, explosive, n.o.s.. UN0464 Nitrocellulose, dry UN0340 or wetted with less than 25 percent water (or alcohol), by mass. Articles, explosive, n.o.s.. UN0466 Nitrocellulose, UN0343 plasticized with not less than 18 percent plasticizing substance, by mass. Articles, explosive, n.o.s.. UN0467 Nitrocellulose, UN0341 unmodified or plasticized with less than 18 percent plasticizing substance, by mass. Articles, explosive, n.o.s.. UN0468 Nitrocellulose, UN0342 wetted with not less than 25 percent alcohol, by mass. Articles, explosive, n.o.s.. UN0470 Nitroglycerin, UN0143 desensitized with not less than 40 percent non- volatile water insoluble phlegmatizer, by mass. Black powder or Gunpowder, UN0027 Nitroglycerin, UN0144 granular or as a meal. solution in alcohol, with more than 1 percent but not more than 10 percent nitrogylcerin. Black powder, compressed or UN0028 Nitroguanidine or UN0282 Gunpowder, compressed or Picrite, dry or Black powder, in pellets or wetted with less Gunpowder, in pellets. than 20 percent water, by mass. ......... Nitrostarch, dry or UN0146 wetted with less than 20 percent water, by mass. Bombs, photo-flash.......... UN0038 Nitrotriazolone or UN0490 NTO. Bombs, with bursting charge. UN0034 Octolite or Octol, UN0266 dry or wetted with less than 15 percent water, by mass. Bombs, with bursting charge. UN0035 Octonal............. UN0496 Boosters, without detonator. UN0042 Pentaerythrite UN0411 tetranitrate or Pentaerythritol tetranitrate or PETN, with not less than 7 percent wax by mass. Boosters, without detonator. UN0283 Pentaerythrite UN0150 tetranitrate, wetted or Pentaerythritol tetranitrate, wetted, or PETN, wetted with not less than 25 percent water, by mass, or Pentaerythrit#

Passage 38e tetranitrate, or Pentaerythritol tetranitrate or PETN, desensitized with not less than 15 percent phlegmatizer by mass. Bursters, explosive......... UN0043 Pentolite, dry or UN0151 wetted with less than 15 percent water, by mass. Cartridges for weapons, UN0326 Powder cake, wetted UN0433 blank. or Powder paste, wetted with not less than 17 percent alcohol by mass. Cartridges for weapons, UN0413 Powder cake, wetted UN0159 blank. or Powder paste, wetted with not less than 25 percent water, by mass. Cartridges for weapons, UN0327 Powder, smokeless... UN0160 blank or Cartridges, small arms, blank. Cartridges for weapons, UN0328 Powder, smokeless... UN0161 inert projectile. Cartridges for weapons, UN0417 Projectiles, with UN0346 inert projectile or burster or Cartridges, small arms. expelling charge. Cartridges for weapons, with UN0006 Projectiles, with UN0168 bursting charge. bursting charge. Cartridges for weapons, with UN0321 Projectiles, with UN0169 bursting charge. bursting charge. Cartridges, oil well........ UN0277 Propellant, liquid.. UN0495 Cartridges, power device.... UN0275 Propellant, liquid.. UN0497 Cartridges, power device.... UN0381 Propellant, solid... UN0498 Cases, combustible, empty, UN0447 Propellant, solid... UN0499 without primer. Charges, bursting, plastics UN0457 RDX and HMX UN0391 bonded. mixtures, wetted with not less than 15 percent water by mass or RDX and HMX mixtures, desensitized with not less than 10 percent phlegmatizer by mass. Charges, bursting, plastics UN0458 Rocket motors....... UN0186 bonded. Charges, demolition......... UN0048 Rocket motors....... UN0280 Charges, depth.............. UN0056 Rocket motors....... UN0281 Charges, explosive, UN0442 Rockets, with UN0181 commercial without bursting charge. detonator. Charges, explosive, UN0443 Rockets, with UN0182 commercial without bursting charge. detonator. Charges, propelling......... UN0271 Rockets, with UN0436 expelling charge. Charges, propelling......... UN0272 Rockets, with UN0437 expelling charge. Charges, propelling......... UN0415 Rockets, with inert UN0183 head. Charges, propelling, for UN0242 Sodium dinitro-o- UN0234 cannon. cresolate, dry or wetted with less than 15 percent water, by mass. Charges, propelling, for UN0279 Sodium picramate, UN0235 cannon. dry or wetted with less than 20 percent water, by mass. Charges, propelling, for UN0414 Sounding devices, UN0374 c#

Passage 39annon. explosive. Charges, shaped, flexible, UN0288 Sounding devices, UN0375 linear. explosive.#

Passage 40Charges, shaped, without UN0059 Substances, UN0474 detonator. explosive, n.o.s.. Charges, shaped, without UN0439 Substances, UN0475 detonator. explosive, n.o.s.. Charges, supplementary UN0060 Substances, UN0477 explosive. explosive, n.o.s.. Cord detonating or Fuse UN0102 Tetranitroaniline... UN0207 detonating metal clad. Cord, detonating or Fuse, UN0290 Torpedoes with UN0329 detonating metal clad. bursting charge. Cord, detonating, flexible.. UN0065 Torpedoes with UN0451 bursting charge. Cyclotetramethylenetetranitr UN0484 Trinitroaniline or UN0153 amine, desensitized or Picramide. Octogen, desensitized or HMX, desensitized. Cyclotetramethylenetetranitr UN0226 Trinitroanisole..... UN0213 amine, wetted or HMX, wetted or Octogen, wetted with not less than 15 percent water, by mass. Cyclotrimethylenetrinitramin UN0483 Trinitrobenzene, dry UN0214 e, desensitized or or wetted with less Cyclonite, desensitized or than 30 percent Hexogen, desensitized or water, by mass. RDX, desensitized. Cyclotrimethylenetrinitramin UN0072 Trinitrobenzenesulfo UN0386 e, wetted or Cyclonite, nic acid. wetted or Hexogen, wetted or RDX, wetted with not less than 15 percent water by mass. Deflagrating metal salts of UN0132 Trinitrobenzoic UN0215 aromatic nitroderivatives, acid, dry or wetted n.o.s.. with less than 30 percent water, by mass. Diethyleneglycol dinitrate, UN0075 Trinitrochlorobenzen UN0155 desensitized with not less e or Picryl than 25 percent non- chloride. volatile water-insoluble phlegmatizer, by mass. Dinitroglycoluril or Dingu.. UN0489 Trinitrofluorenone.. UN0387 Dinitrophenol, dry or wetted UN0076 Trinitro-m-cresol... UN0216 with less than 15 percent water, by mass. Dinitrophenolates alkali UN0077 Trinitronaphthalene. UN0217 metals, dry or wetted with less than 15 percent water, by mass. Dinitroresorcinol, dry or UN0078 Trinitrophenetole... UN0218 wetted with less than 15 percent water, by mass. Dinitrosobenzene............ UN0406 Trinitrophenol or UN0154 Picric acid, dry or wetted with less than 30 percent water, by mass. Dipicryl sulfide, dry or UN0401 Trinitrophenylmethyl UN0208 wetted with less than 10 nitramine or Tetryl. percent water, by mass. Explosive, blasting, type A. UN0081 Trinitroresorcinol UN0219 or Styphnic acid, dry or wetted with less than 20 percent water, or mixture of alcohol and water, by mass. Explosive, blasting, type B. UN0082 Trinitroresorc#

Passage 41inol, UN0394 wetted or Styphnic acid, wetted with not less than 20 percent water, or mixture of alcohol and water by mass. Explosive, blasting, type C. UN0083 Trinitrotoluene and UN0388 Trinitrobenzene mixtures or TNT and trinitrobenzene mixtures or TNT and hexanitrostilbene mixtures or Trinitrotoluene and hexanitrostilnene mixtures. Explosive, blasting, type D. UN0084 Trinitrotoluene UN0389 mixtures containing Trinitrobenzene and Hexanitrostilbene or TNT mixtures containing trinitrobenzene and hexanitrostilbene. Explosive, blasting, type E. UN0241 Trinitrotoluene or UN0209 TNT, dry or wetted with less than 30 percent water, by mass. Fracturing devices, UN0099 Tritonal............ UN0390 explosive, without detonators for oil wells. Fuzes, detonating, with UN0408 Urea nitrate, dry or UN0220 protective features. wetted with less than 20 percent water, by mass. Fuzes, detonating, with UN0409 Warheads, rocket UN0286 protective features. with bursting charge. Grenades, hand or rifle, UN0284 Warheads, rocket UN0287 with bursting charge. with bursting charge. Grenades, hand or rifle, UN0285 Warheads, torpedo UN0221 with bursting charge. with bursting charge. Hexanitrodiphenylamine or UN0079 Zirconium picramate, UN0236 Dipicrylamine or Hexyl. dry or wetted with less than 20 percent water, by mass. Hexanitrostilbene........... UN0392 ------------------------------------------------------------------------ Column (10A) in the HMT is revised to read Stowage Category 05 for the following proper shipping names and corresponding identification numbers: ------------------------------------------------------------------------ Proper shipping name UN No. Proper shipping name UN No. ------------------------------------------------------------------------ Ammunition smoke, white UN0245 Diazodinitrophenol, UN0074 phosphorus with burster, wetted with not expelling charge, or less than 40 propelling charge. percent water or mixture of alcohol and water, by mass. Ammunition, incendiary UN0247 Fuzes, detonating... UN0106 liquid or gel, with burster, expelling charge or propelling charge. Ammunition, incendiary, UN0243 Fuzes, detonating... UN0107 white phosphorus, with burster, expelling charge or propelling charge.#

Passage 42Ammunition, incendiary, UN0244 Fuzes, detonating... UN0257 white phosphorus, with burster, expelling charge or propelling charge. Ammunition, smoke, white UN0246 Grenades, hand or UN0292 phosphorus with burster, rifle, with expelling charge, or bursting charge. propelling charge. Ammunition, toxic with UN0020 Grenades, hand or UN0293 burster, expelling charge, rifle, with or propelling charge. bursting charge. Ammunition, toxic with UN0021 Guanyl UN0113 burster, expelling charge, nitrosaminoguanylid or propelling charge. ene hydrazine, wetted with not less than 30 percent water, by mass. Articles, explosive, n.o.s.. UN0350 Guanyl UN0114 nitrosaminoguanylte trazene, wetted or Tetrazene, wetted with not less than 30 percent water or mixture of alcohol and water, by mass. Articles, explosive, n.o.s.. UN0355 Lead azide, wetted UN0129 with not less than 20 percent water or mixture of alcohol and water, by mass. Articles, explosive, n.o.s.. UN0356 Lead styphnate, UN0130 wetted or Lead trinitroresorcinate , wetted with not less than 20 percent water or mixture of alcohol and water, by mass. Articles, explosive, n.o.s.. UN0465 Mercury fulminate, UN0135 wetted with not less than 20 percent water, or mixture of alcohol and water, by mass. Articles, explosive, n.o.s.. UN0469 Mines with bursting UN0136 charge. Articles, explosive, n.o.s.. UN0472 Mines with bursting UN0294 charge. Articles, pyrophoric........ UN0380 Primers, cap type... UN0377 Barium azide, dry or wetted UN0224 Primers, cap type... UN0378 with less than 50 percent water, by mass. Bombs with flammable liquid, UN0399 Projectiles, with UN0426 with bursting charge. burster or expelling charge. Bombs with flammable liquid, UN0400 Projectiles, with UN0427 with bursting charge. burster or expelling charge. Bombs, photo-flash.......... UN0037 Projectiles, with UN0167 bursting charge. Bombs, with bursting charge. UN0033 Projectiles, with UN0324 bursting charge. Bombs, with bursting charge. UN0291 Rocket motors with UN0250 hypergolic liquids with or without an expelling charge. Boosters with detonator..... UN0225 Rocket motors with UN0322 hypergolic liquids with or without an expelling charge. Boosters with detonator..... UN0268 Rocket motors, UN0395 liquid fueled. Cartridges for weapons, with UN0005 Rocket motors, UN0396 bursting charge. liquid fueled. Cartridges for weapons, with UN0007 Rockets, liquid UN0397 bu#

Passage 43rsting charge. fueled with bursting charge. Cartridges for weapons, with UN0348 Rockets, liquid UN0398 bursting charge. fueled with bursting charge. Components, explosive train, UN0382 Rockets, with UN0180 n.o.s.. bursting charge. Components, explosive train, UN0383 Rockets, with UN0295 n.o.s.. bursting charge. Components, explosive train, UN0461 Samples, explosive, UN0190 n.o.s.. other than initiating explosives. Contrivances, water- UN0248 Sounding devices, UN0204 activated, with burster, explosive. expelling charge or propelling charge. Contrivances, water- UN0249 Sounding devices, UN0296 activated, with burster, explosive. expelling charge or propelling charge. Detonator assemblies, non- UN0360 Substances, UN0357 electric for blasting. explosive, n.o.s.. Detonator assemblies, non- UN0361 Substances, UN0358 electric, for blasting. explosive, n.o.s.. Detonators for ammunition... UN0073 Substances, UN0359 explosive, n.o.s.. Detonators for ammunition... UN0364 Substances, UN0473 explosive, n.o.s.. Detonators for ammunition... UN0365 Torpedoes with UN0330 bursting charge. Detonators, electric, for UN0030 Torpedoes, liquid UN0450 blasting. fueled, with inert head. Detonators, electric, for UN0255 Torpedoes, liquid UN0449 blasting. fueled, with or without bursting charge. Detonators, non-electric, UN0029 Warheads, rocket UN0371 for blasting. with burster or expelling charge. Detonators, non-electric, UN0267 Warheads, rocket UN0369 for blasting. with bursting charge. ------------------------------------------------------------------------#

Passage 44Vessel Stowage Codes (10B) Section 172.101(k) describes Column (10) of the HMT and the vessel stowage requirements for specific entries in the HMT. Furthermore, column (10B) [Other provisions] specifies codes for stowage requirements for specific hazardous materials. The meaning of each code in Column (10B) is set forth in Sec. 176.84 of this subchapter. Vessel shipments of Class 1 explosives are currently required to be stored away from all sources of heat including steam pipes, heating coils, sparks, and flame in accordance with Sec. 176.116(a). In addition to this general provision in Sec. 176.116, several vessel stowage codes in column (10B) make reference to shading or stowing away from heat. To harmonize with the IMDG Code, reduce the number of redundant vessel stowage codes, and incorporate the addition of a new definition for protected from sources of heat (see Section 176.2 of this final rule for definition) PHMSA is deleting vessel stowage codes 50 and 48 and replacing all references to these codes with stowage code 25. See Section 176.84 for a detailed discussion of our revision to stowage code 25. The following proper shipping names and corresponding identification numbers will have stowage code 48 replaced with stowage code 25 in Column (10B) in the HMT. If the commodity is currently assigned both stowage code 48 and 25 in Column (10B) in the HMT stowage code 48 will be deleted and stowage code 25 will remain.#

Passage 45------------------------------------------------------------------------ Proper shipping name UN No. Proper shipping name UN No. ------------------------------------------------------------------------ Aerosols, poison, Packing ......... Calcium hypochlorite UN3486 Group III (each not mixture, dry, exceeding 1 L capacity). corrosive with more than 10% but not more than 39% available chlorine. Aerosols, poison, Packing UN1950 Calcium hypochlorite UN2208 Group III (each not mixtures, dry, with exceeding 1 L capacity). more than 10 percent but not more than 39 percent available chlorine. Aerosols, flammable, (each UN1950 Copra............... UN1363 not exceeding 1 L capacity). Aerosols, flammable, n.o.s. UN1950 Dichlorophenyl UN2250 (engine starting fluid) isocyanates. (each not exceeding 1 L capacity). Aerosols, non-flammable, UN1950 Dicyclohexylammonium UN2687 (each not exceeding 1 L nitrite. capacity). Aerosols, poison, (each not UN1950 Gallium............. UN2803 exceeding 1 L capacity). Ammonium nitrate based UN2067 Hypochlorites, UN3212 fertilizer. inorganic, n.o.s. Ammonium nitrate emulsion or UN3375 Isocyanates, toxic, UN3080 Ammonium nitrate suspension flammable, n.o.s. or Ammonium nitrate gel, or Isocyanate intermediate for blasting solutions, toxic, explosives. flammable, n.o.s., flash point not less than 23 degrees C but not more than 61 degrees C and boiling point less than 300 degrees C. Ammonium nitrate, with not UN1942 Isocyanates, toxic, UN2206 more than 0.2% total n.o.s. or combustible material, Isocyanate including any organic solutions, toxic, substance, calculated as n.o.s., flash point carbon to the exclusion of more than 61 any other added substance. degrees C and boiling point less than 300 degrees C. Batteries, nickel-metal UN3496 Isocyanatobenzotrifl UN2285 hydride see Batteries, dry, uorides. sealed, n.o.s. for nickel- metal hydride batteries transported by modes other than vessel. Benzyldimethylamine......... UN2619 Lithium UN1471 hypochlorite, dry or Lithium hypochlorite mixture. 5-tert-Butyl-2,4,6-trinitro- UN2956 Methacrylonitrile, UN3079 m-xylene or Musk xylene. stabilized. Calcium hypochlorite, dry, UN3485 Phosphorous acid.... UN2834 corrosive or Calcium hypochlorite mixtures, dry, corrosive with more than 39% available chlorine (8.8% available oxygen). Calcium hypochlorite, dry or UN1748 Propylene UN2611 Calcium hypochlorite ch#

Passage 46lorohydrins. mixtures dry with more than 39 percent available chlorine (8.8 percent available oxygen). Calcium hypochlorite, UN3487 Sodium carbonate UN3378 hydrated, corrosive or peroxyhydrate. Calcium hypochlorite, hydrated mixture, corrosive with not less than 5.5% but not more than 16% water. Calcium hypochlorite, UN2880 Sodium perborate UN3377 hydrated or Calcium monohydrate. hypochlorite, hydrated mixtures, with not less than 5.5 percent but not more than 16 percent water. ------------------------------------------------------------------------ The following proper shipping names and corresponding identification numbers will have stowage code 19 replaced with stowage code 25 in Column (10B) in the HMT if stowage code 25 is not currently listed in Column (10B). If the proper shipping name already is currently assigned both stowage code 19 and 25, stowage code 19 will be deleted. ------------------------------------------------------------------------ Proper shipping name UN No. Proper shipping name UN No. ------------------------------------------------------------------------ Copra....................... UN1363 Plastic molding UN3314 compound in dough, sheet or extruded rope form evolving flammable vapor. Polymeric beads, expandable UN2211 Sulfur.............. NA1350 evolving flammable vapor. Sulfur...................... UN1350 ------------------------------------------------------------------------#

Passage 47We are also assigning stowage code 25 to every Class 1 explosive table entry to indicate these materials must be protected from sources of heat in accordance with the new definition of ``protected from sources of heat'' in Sec. 176.2. See Section 176.84 for a detailed discussion of our revision to stowage code 25 and Sec. 176.2 for the definition of ``protected from sources of heat.'' Stowage code 50 is currently not assigned to any HMT entries and is being deleted. PHMSA is revising stowage code 128 to account for a citation change in the IMDG Code. The new text of stowage code 128 is ``stow in accordance with the IMDG Code, Sub-section 7.6.2.7.2 (incorporated by reference; see Sec. 171.7 of this subchapter).'' PHMSA is deleting stowage codes 7E, 8E, and 20E. The reduction in the number of vessel stowage categories in column (10A) makes these codes unnecessary and any applicable stowage requirements are covered by the requirements of the applied code in column (10A). The following proper shipping names and corresponding identification numbers will have stowage code 7E removed from column (10B) of the HMT. ------------------------------------------------------------------------ Proper shipping name UN No. Proper shipping name UN No. ------------------------------------------------------------------------ Ammunition, smoke with or UN0303 Ammunition, tear- UN0301 without burster, expelling producing with charge or propelling charge. burster, expelling charge or propelling charge. ------------------------------------------------------------------------ The following proper shipping names and corresponding identification numbers will have stowage code 8E removed from column (10B) of the HMT.#

Passage 48------------------------------------------------------------------------ Proper shipping name UN No. Proper shipping name UN No. ------------------------------------------------------------------------ Ammunition smoke, white UN0245 Articles, explosive, UN0354 phosphorus with burster, n.o.s.. expelling charge, or propelling charge. Ammunition, smoke, white UN0246 Articles, explosive, UN0355 phosphorus with burster, n.o.s.. expelling charge, or propelling charge. Ammunition, smoke with or UN0015 Articles, explosive, UN0356 without burster, expelling n.o.s.. charge or propelling charge. Ammunition, smoke with or UN0016 Articles, pyrophoric UN0380 without burster, expelling charge or propelling charge. Ammunition, smoke with or UN0303 Contrivances, water- UN0248 without burster, expelling activated, with charge or propelling charge. burster, expelling charge or propelling charge. Ammunition, tear-producing UN0018 Contrivances, water- UN0249 with burster, expelling activated, with charge or propelling charge. burster, expelling charge or propelling charge. Ammunition, tear-producing UN0019 Rocket motors with UN0250 with burster, expelling hypergolic liquids charge or propelling charge. with or without an expelling charge. Ammunition, tear-producing UN0301 Rocket motors with UN0322 with burster, expelling hypergolic liquids charge or propelling charge. with or without an expelling charge. Ammunition, toxic with UN0020 Substances, UN0357 burster, expelling charge, explosive, n.o.s.. or propelling charge. Ammunition, toxic with UN0021 Substances, UN0358 burster, expelling charge, explosive, n.o.s.. or propelling charge. Substances, UN0359 explosive, n.o.s.. ------------------------------------------------------------------------ The following proper shipping names and corresponding identification numbers will have stowage code 20E removed from column (10B) of the HMT.#

Passage 49------------------------------------------------------------------------ Proper shipping name UN No. Proper shipping name UN No. ------------------------------------------------------------------------ Ammunition, smoke with or UN0015 Ammunition, tear- UN0018 without burster, expelling producing with charge or propelling charge. burster, expelling charge or propelling charge. Ammunition, smoke with or UN0016 Ammunition, tear- UN0019 without burster, expelling producing with charge or propelling charge. burster, expelling charge or propelling charge. ------------------------------------------------------------------------#

Passage 50During review of the explosive stowage codes it was noted that stowage code 1E was assigned to UN0504 1H-Tetrazole and UN0502 Rockets, with inert head. Stowage code 1E was removed in a final rule published on June 21 2001, under Docket Number RSPA-2000-7702 (HM-215D) [66 FR 33316] entitled, ``Harmonization with the United Nations Recommendations, International Maritime Dangerous Goods Code, and International Civil Aviation Organization's Technical Instructions'' and, in this final rule, PHMSA is amending the listings for these two entries by removing these two codes whose requirements have been captured by other vessel stowage provisions. Section 172.102 Special Provisions Section 172.102 lists special provisions applicable to the transportation of specific hazardous materials. Special provisions contain packaging requirements, prohibitions, and exceptions applicable to particular quantities or forms of hazardous materials. PHMSA is revising Sec. 172.102, Special provisions as follows: Special Provision 47 Special provision 47 provides classification exceptions for mixtures of solids and flammable liquids. In this final rule, PHMSA is revising special provision 47 to clarify that the requirement that each packaging must correspond with a design type that has passed a leakproofness test at the Packing Group II level applies only to single packagings. Special Provision 48 Special provision 48 provides classification exceptions for mixtures of solids and toxic liquids. In this final rule, PHMSA is revising special provision 48 to clarify that the requirement that each packaging must correspond with a design type that has passed a leakproofness test at the Packing Group II level applies only to single packagings. Special Provision 49 Special provision 49 provides classification exceptions for mixtures of solids and corrosive liquids. In this final rule, PHMSA is revising special provision 49 to clarify that the requirement that each packaging must correspond with a design type that has passed a leakproofness test at the Packing Group II level applies only to single packagings. Special Provision 101 In a NPRM published in the Federal Register on August 31, 2006 (71 FR 51895), we proposed to remove Sec. 172.102(c)(1), Special provision 101. In the NPRM, we stated that with the introduction of the letter ''G'' in Column (1), which requires the n.o.s. and generic pr#

Passage 51oper shipping names to be supplemented with the technical name of the hazardous material, special provision 101 became obsolete. Consequently, because we did not receive public comment, the amendment was adopted as proposed in a final rule published in the Federal Register on December 29, 2006 (71 FR 78596). Consequences of the removal of Sec. 172.102(c)(1) Special provision 101 in 2006 may have resulted in noncompliance for certain Department of Defense (DOD) explosive shipments. DOD recently asserted the current provisions in Sec. Sec. 171.8 and 172.203(k) of the HMR do not permit technical names to be indicated in such a manner as former special provision 101 required. For example, a DOD explosive shipment approved under the generic description ``Articles, explosive, n.o.s.'' was previously assigned special provision 101 in column 7 of the Sec. 172.101 Hazardous Materials Table that required the name of the particular substance or article to be specified as the technical name for the substance or article (e.g., ``Fuze, Grenade, M219A2'') in association with the basic description. Therefore, PHMSA is reinstating special provision 101 for the following HMT entries:#

Passage 52UN0349 Articles, explosive, n.o.s. UN0350 Articles, explosive, n.o.s. UN0351 Articles, explosive, n.o.s. UN0352 Articles, explosive, n.o.s. UN0353 Articles, explosive, n.o.s. UN0354 Articles, explosive, n.o.s. UN0355 Articles, explosive, n.o.s. UN0356 Articles, explosive, n.o.s. UN0462 Articles, explosive, n.o.s. UN0463 Articles, explosive, n.o.s. UN0464 Articles, explosive, n.o.s. UN0465 Articles, explosive, n.o.s. UN0466 Articles, explosive, n.o.s. UN0467 Articles, explosive, n.o.s. UN0468 Articles, explosive, n.o.s. UN0469 Articles, explosive, n.o.s. UN0470 Articles, explosive, n.o.s. UN0471 Articles, explosive, n.o.s. UN0472 Articles, explosive, n.o.s. UN0382 Components, explosive train, n.o.s. UN0383 Components, explosive train, n.o.s. UN0384 Components, explosive train, n.o.s. UN0461 Components, explosive train, n.o.s. UN0357 Substances, explosive, n.o.s. UN0358 Substances, explosive, n.o.s. UN0359 Substances, explosive, n.o.s. UN0473 Substances, explosive, n.o.s. UN0474 Substances, explosive, n.o.s. UN0475 Substances, explosive, n.o.s. UN0476 Substances, explosive, n.o.s. UN0477 Substances, explosive, n.o.s. UN0478 Substances, explosive, n.o.s. UN0479 Substances, explosive, n.o.s. UN0480 Substances, explosive, n.o.s. UN0481 Substances, explosive, n.o.s. UN0485 Substances, explosive, n.o.s. UN0482 Substances, explosive, very insensitive, n.o.s. or Substances, EVI, n.o.s. Special Provision 118 Special provision 118 states that materials listing this special provision may not be transported under the provisions of Division 4.1 unless specifically authorized by the Associate Administrator. In the UN Model Regulations the corresponding special provision, SP 272, contained a note that the special provision referred to UN0143. This special provision in the UN Model Regulations has been revised to indicate that the special provision applies to both UN0143 and UN0150, as appropriate. To maintain consistency with the UN Model Regulations, PHMSA is adopting this editorial note and revising special provision 118 by adding the language ``(see UN0143 or UN0150 as appropriate)'' following the existing text. Special Provision 134 Special provision 134 is revised to note that this provision also applies to equipment powered by wet batteries or sodium batteries that are transported with these batteries installed. Special Provision 155 Special provision 155 states that#

Passage 53Fish meal or fish scrap may not be transported if the temperature at the time of loading either exceeds 35 [deg]C (95 [deg]F), or exceeds 5 [deg]C (9 [deg]F) above the ambient temperature, whichever is higher. PHMSA is revising special provision 155 by adding a reference to the new proper shipping name ``krill meal.'' Krill meal possesses similar self-heating hazard characteristics to fish meal and scrap; therefore, application of this special provision is appropriate. This addition clarifies that special provision 155 applies to fish meal and fish scrap as well as krill meal. Special Provision 222 Special provision 222 is added to indicate that shipments of 1.4S materials reclassed as ORM-D are not eligible to be offered for transportation by aircraft. Special provision 222 is added to the ORM-D entries for Cartridges, small arms, Cartridges, power device (used to project fastening devices). Special Provision 237 Special provision 237 specifies that ``Batteries, dry, containing potassium hydroxide solid, electric storage '' must be prepared and packaged in accordance with the requirements of Sec. 173.159(a), (b), and (c) and that for transportation by aircraft, the provisions of Sec. 173.159(b)(2) are applicable. PHMSA is adding an additional sentence to special provision 237 clarifying the applicability of the provision. Specifically language is added to state that the entry for ``Batteries, dry, containing potassium hydroxide solid, electric storage'' may only be used for the transport of non-activated batteries that contain dry potassium hydroxide and that are intended to be activated prior to use by the addition of an appropriate amount of water to the individual cells. Special Provision 238 Special provision 238 is added to address the shipment of neutron radiation detectors. Neutron detection is a key component used in nuclear arms interdiction in addition to other applications such as nuclear reactor monitoring, neutron-based cancer treatments, neutron spallation, nondestructive testing and health physics applications. Most neutron radiation detectors contain boron trifluoride gas, UN1008, which is currently forbidden by passenger and cargo aircraft as noted in Columns (9A) and (9B) of the HMT. Currently, neutron radiation detectors that contain this gas can only be transported by air under a special permit. ICAO recently adopted a special provision#

Passage 54specifically addressing neutron radiation detectors. The recently adopted special provision A190 permits, under certain conditions the transportation by cargo aircraft of neutron radiation detectors containing boron trifluoride. These conditions include quantity of gas limitations, and construction and packaging specifications. The special provision also provides that under certain conditions these neutron radiation detectors containing not more than 1 gram of boron trifluoride gas are not otherwise subject to the ICAO Technical Instructions. PHMSA granted a special permit, for the transportation by all modes, of certain neutron radiation detectors containing boron trifluoride gas. The limitations set forth in Special Provision A190 of the ICAO Technical Instructions do not exceed any limitations of the special permit and, therefore, PHMSA is adopting and applying them to all modes of transportation except passenger-carrying aircraft by incorporating them into Sec. 172.102(c)(1), Special provision 238. Specifically, the special provision provides packaging requirements (including pressure limitations), quantities permitted, and package construction requirements for radiation detectors containing non- pressurized boron trifluoride gas in excess of 1 gram. The special provision also provides additional exceptions from the HMR based on the transport mode and other conditions. The special provision will be applicable to the entry ``UN1008, Boron trifluoride'' in the HMT. PHMSA#

Passage 55believes the adoption of this special provision provides an adequate level of safety for the transportation of these items, while providing flexibility in the need to obtain a special permit. Special Provision 338 A new special provision 338 is added to clarify that when lithium cells or batteries are contained in the fuel cell system, the item must be described under this entry and the entry ``Lithium batteries, contained in equipment.'' This special provision is applied to UN3473 ``Fuel cell cartridges or Fuel cell cartridges contained in equipment or Fuel cell cartridges packed with equipment, containing flammable liquids''; UN3476 ``Fuel cell cartridges or Fuel cell cartridges contained in equipment or Fuel cell cartridges packed with equipment, containing water-reactive substances''; UN3477 ``Fuel cell cartridges or Fuel cell cartridges contained in equipment or Fuel cell cartridges packed with equipment, containing corrosive substances''; UN3478 ``Fuel cell cartridges or Fuel cell cartridges contained in equipment or Fuel cell cartridges packed with equipment, containing liquefied flammable gas''; and UN3479 ``Fuel cell cartridges or Fuel cell cartridges contained in equipment or Fuel cell cartridges packed with equipment, containing hydrogen in metal hydride.'' Special Provision 360 New special provision 360 is added and assigned to UN3091, ``Lithium batteries, contained in equipment'' to clarify that vehicles powered only by lithium batteries must be assigned to identification number UN3071, ``Battery powered vehicle.'' Special Provision 361 New special provision 361 is added to clarify that certain capacitors with limited energy storage capability are excepted from the HMR. Specifically, the special provision states that capacitors with an energy storage capacity of 0.3 Wh or less are not subject the HMR. Furthermore this special provision defines energy storage capacity as the energy held by a capacitor, as calculated using the nominal voltage and capacitance. Section 173.176 provides that capacitors not installed in equipment must be transported in an uncharged state and capacitors installed in equipment must be transported in either an uncharged state or protected against short circuit. Certain types of capacitors such as asymmetrical capacitors are designed to maintain a terminal voltage. This special provision also clarifies that the entry UN34#

Passage 5699 does not apply to these capacitors. This special provision is applied to the new HMT entry UN3499, ``Capacitor, electric double layer (with an energy storage capacity greater than 0.3 Wh).'' Veolia expressed concern that while manufacturers will have control over the charge state of a capacitor when it is offered for transportation, when these same capacitors are being offered for transportation for recycling or disposal, the recycling or disposal facility may not be aware of or have control over their charge state. Veoila further asserted that this special provision only applies to electric double layer capacitors with an energy storage capacity of greater than 0.3 Wh, and there are other types of capacitors that have a potential to store a significant amount of energy that may pose a risk during transportation. The 0.3 Wh threshold for electric double layer capacitors is the threshold determined by the UNSCOE below which a capacitor would not pose a significant risk in transportation. PHMSA is aware that there are additional emerging capacitor technologies that are under review by the UNSCOE for possible inclusion in the dangerous goods list. In this final rule PHMSA is only addressing the adoption of the special provision consistent with the amendment to the UN Model regulations. PHMSA has published an advance notice of proposed rulemaking (ANPRM) under Docket HM-253 (77 FR 39662, July 5, 2012) requesting public comment and input concerning the transportation of hazardous materials for recycling or disposal. Special Provision 362 New special provision 362 specifies when a material can be considered a chemical under pressure. Specifically, the special provision states that classification of these materials is to be based on hazard characteristics of the components in the propellant, the liquid, or the solid forms. Further, this special provision details the appropriate primary and subsidiary hazard classes to be assigned to chemical under pressure. Special provision 362 is assigned to the following HMT entries: UN3500, Chemical under pressure, n.o.s.; UN3501, Chemical under pressure, flammable, n.o.s.; UN3503, Chemical under pressure, corrosive, n.o.s.; UN3502, Chemical under pressure, toxic n.o.s.; UN3504, Chemical under pressure, flammable, toxic, n.o.s.; and UN3505, Chemical under pressure, flammable, corrosive, n.o.s. Special Provision 365 With the#

Passage 57adoption of a new HMT entry ``UN3506 Mercury contained in manufactured articles'' in the 17th Revised Edition of the UN Model Regulations to address manufactured articles containing mercury, PHMSA is adding new special provision 365 stating that manufactured instruments and articles containing mercury should reference UN3506. This special provision is applied to UN2809 Mercury. Special Provision A51 PHMSA is adding a new special provision A51 to authorize the transport by passenger aircraft of wet cell aircraft batteries with a mass up to 100 kg net and lithium ion aircraft batteries in packages containing a single aircraft battery with a net mass not exceeding 35 kg. The August 15, 2012 NPRM proposed to authorize the transport of aircraft batteries into Part 175 that provides exceptions from certain regulations for air carrier operator equipment and items of replacement, as well as for items used to provide customer service aboard an aircraft. PRBA and Saft noted the NPRM proposed to authorize the transport of aircraft batteries in a way that is not fully consistent with the 2013-2014 ICAO Technical Instructions, which do not limit the use of this exception to a particular aircraft operator's aircraft batteries. PRBA notes that such an action would frustrate the intent of Congress when it passed the FAA Modernization and Reform Act of 2012. In this final rule we are incorporating this authorization into a special provision consistent with the 2013-2014 ICAO Technical Instructions. Special Provision A60 Special Provision A60 permits UN2014, Hydrogen peroxide, aqueous solution, to be transported in excepted quantities provided a comparative fire test between packages containing the solution and identical packages containing water demonstrated no difference in the burning rate. The likelihood of finding discernible differences with more accurate test equipment used today is much greater than it would have been with equipment used when the test requirements were first developed. This more sensitive equipment often detects negligible differences between the two test subjects and, therefore, precludes transport of these small devices under the special provision. To address the issue, the ICAO Dangerous Goods Panel#

Passage 58(DGP) adopted a proposal to allow small differences in burning rates. In this final rule we are harmonizing with the ICAO Technical Instructions with regard to the comparative fire test for Hydrogen peroxide, aqueous solution. Special provision A60 is revised accordingly. Special Provision A100 Special Provision A100 states that primary (non-rechargeable) lithium batteries and cells are forbidden for transport aboard passenger-carrying aircraft and secondary (rechargeable) lithium batteries and cells are authorized aboard passenger-carrying aircraft in packages that do not exceed a gross weight of 5 kg. Special provision A100 is revised to clarify the weight limitations for secondary lithium batteries are net and not gross quantities. There are some combinations of authorized battery packagings that contribute significantly towards the gross weight of the finished package. The intent of this change is to indicate that the quantity limits for secondary lithium battery shipments aboard passenger-carrying aircraft are to be based on the actual weight of the batteries in each individual package and not the weight of the completed package. Special Provision A103 Special Provision A103 specifies that lithium batteries contained in equipment is authorized aboard passenger carrying aircraft if the gross weight of the inner package of secondary lithium batteries or cells packed with the equipment does not exceed 5 kg (11 pounds). Special provision A103 is revised to clarify the weight limitations are net and not gross quantities. There are some combinations of authorized battery packagings that contribute significantly towards the gross weight of the finished package. The intent of this change is to indicate that the quantity limits for secondary lithium battery shipments aboard passenger carry aircraft are to be based on the actual weight of the batteries in each individual package and not the weight of the completed package. Special Provision A189 We are adding a new special provision, A189, which is assigned to the HMT entry ``UN2209, Formaldehyde solutions, with not less than 25 percent formaldehyde'' indicating how Formaldehyde solutions with more than 25% are to be classified. It was suggested at the ICAO DGP that the entry for ``UN2209, Formaldehyde solution with not less than 25% formaldehyde'' implied that concentrations of less than 25% formaldehyde were no#

Passage 59t regulated. To clarify these requirements, the ICAO adopted a new special provision detailing how differing percentage of formaldehyde solutions are regulated. We are adding language detailing how differing percentages of Formaldehyde solutions are to be regulated in the new special provision A189. This special provision is applied to UN3334, Aviation regulated liquid, n.o.s. and NA3082, Other regulated substances, liquid, n.o.s. Special Provision A191 In the NPRM, PHMSA proposed a new special provision, A192, noting that regardless of the Division 6.1 (toxic) subsidiary indicated in the HMT, the poison subsidiary hazard label and an indication of this subsidiary hazard on the shipping paper are not required for manufactured articles containing less than 0.45 kg (1 pound) of mercury. This provision aligns with the decision of the UN Sub- Committee to ensure that transport of such articles, particularly by air, is not impeded due to mercury's revised classification. PHMSA received one comment from UPS noting that this special provision was assigned A191 by ICAO and not A192 as assigned by PHMSA. UPS also noted that ICAO provided an exception from display of the subsidiary ``Toxic'' label and the identification of subsidiary risk for up to 5 kg (11 pounds) of mercury, PHMSA proposed an exception for no more than 0.454 kg (1 LB). UPS sees no reason for this lack of alignment, but foresees unnecessary challenges arising from such inconsistency. Therefore, UPS urges PHMSA to align directly with the 5 kg limit in the ICAO text. PHMSA is assigning special provision A191 to this entry for continuity with the international regulations. PHMSA agrees with UPS regarding the amount of mercury that may be present in manufactured articles to utilize the exception from communicating the subsidiary hazard, and is changing that amount to 5 kg (11 pounds). Special Provision A200 As previously discussed, new special provision, A200, is added stating the entries assigned this special provision must be transported as cargo when transported by aircraft and cannot be carried onboard an aircraft by passengers or crewmembers either in or as carry-on baggage, checked baggage, or on their person unless specifically excepted by Sec. 175.10, ``Exceptions for Passengers, Crewmembers, and Air Operators.'' This special provision is assigned to articles and will be applied to: UN3166, Engin#

Passage 60es, internal combustion or Engines, fuel cell, flammable gas powered; UN3166, Engines, internal combustion, or Engines, fuel cell, flammable liquid powered; UN3166, Vehicle, flammable gas powered or Vehicle, fuel cell, flammable gas powered; UN3166, Vehicle, flammable liquid powered or Vehicle, fuel cell, flammable liquid powered; UN0503, Air bag inflators, or Air bag modules, or Seat-belt pretensioners; and, UN3268, Air bag inflators, or Air bag modules, or Seat-belt pretensioners. Special Provision B120 Special provision B120 is added to specify the use of FBCs conforming to the requirements in Subpart R and Subpart S of part 178 of this subchapter are permitted. The special provision is applicable to the following entries: ------------------------------------------------------------------------ Proper shipping name UN No. ------------------------------------------------------------------------ Ammonium nitrate based fertilizer.......... UN2067 Ammonium nitrate, with not more than 0.2% UN1942 total combustible material, including any organic substance, calculated as carbon to the exclusion of any other added substance. Calcium nitrate............................ UN1454 Environmentally hazardous substance, solid, UN3077 n.o.s. Magnesium nitrate.......................... UN1474 Naphthalene, crude or Naphthalene, refined. UN1334 Paraformaldehyde........................... UN2213 Potassium nitrate.......................... UN1486 Sodium carbonate peroxyhydrate............. UN3378 Sodium nitrate............................. UN1498 Sodium nitrate and potassium nitrate UN1499 mixtures. Sodium perborate monohydrate............... UN3377 Sulfur (domestic and international entries) UN1350 ------------------------------------------------------------------------#

Passage 61FBCs must conform to the performance-oriented construction standards and testing criteria in new subparts R and S of part 178. In addition, shipments of FBCs must be prepared and otherwise conform to the general requirements for bulk packages in subpart B of part 173 and the new Sec. 173.37. IBC Codes In a final rule published in the Federal Register on January 19, 2011 (76 FR 3308; HM-215K), the Table 1 (IBC Codes) in paragraph (c)(4) were editorially revised to remove UN Specifications 31A, 31B and 31N from IBC Codes IB4 through IB8. The revision was consistent with amendments to international standards that removed the specifications from the indicated codes in the table because IBC Codes IB4 through IB8 are assigned to solids, whereas, UN Specifications 31A, 31B, and 31N are authorized for transportation of liquids in IBC Codes IB1 through IB3 and are assigned to liquid materials only. In the January 19, 2011 final rule, PHMSA inadvertently failed to also remove the remaining liquid IBC specifications (31H1, 31H2, 31HZ1, and 31HZ2) from IB Codes IB4 through IB8. Therefore, PHMSA is editorially correcting the IBC Code Table in Sec. 172.102(c)(4). Special Provision TP39 Special provision, TP39, is added and assigned to HMT entry ``UN2381, Dimethyl disulfide.'' This special provision indicates that portable tank instruction T4 may continue to be applied until December 31, 2018. This provides more time for portable tank transporters to transition their current fleets. Special Provision TP40 Special provision TP40 is added and assigned to HMT entries ``UN3500, Chemical under pressure, n.o.s.; UN3501, Chemical under pressure, flammable, n.o.s.; UN3503, Chemical under pressure, corrosive, n.o.s., UN3503; UN3502, Chemical under pressure, toxic n.o.s.; UN3504, Chemical under pressure, flammable, toxic, n.o.s.; and UN3505, Chemical under pressure, flammable, corrosive, n.o.s.'' The special provision indicates that the portable tanks must not be transported when connected with spray application equipment. This provides an additional measure preventing inadvertent release of hazardous materials in transport. Special Provision TP41 Special provision TP41 is added and assigned to HMT entries ``UN3148, Water-reactive liquid, n.o.s.,'' indicating that the portable tank instruction T9 may continue to be applied until December 31, 2018. Special Provision T50 Special provi#

Passage 62sion T50 is revised to note that this provision is applicable to chemicals under pressure as well as liquefied compressed gases. Special provision T50 would be assigned to HMT entries ``UN3500, Chemical under pressure, n.o.s.; UN3501, Chemical under pressure, flammable, n.o.s.; UN3503, Chemical under pressure, corrosive, n.o.s., UN3503; UN3502, Chemical under pressure, toxic n.o.s.; UN3504, Chemical under pressure, flammable, toxic, n.o.s.; and UN3505, Chemical under pressure, flammable, corrosive, n.o.s.'' Special Provision W10 Special provision W10 is added and assigned to HMT entries ``UN3486 Calcium hypochlorite mixture, dry, corrosive with more than 10% but not more than 39% available chlorine'' and to ``UN2208 Calcium hypochlorite mixtures, dry, with more than 10 percent but not more than 39 percent available chlorine'' indicating that when offered for transportation by vessel, the use of large packagings is prohibited. This provision is adopted to align with a recent IMO change forbidding these commodities from being transported by vessel in large packages. PHMSA received two comments (DGAC & IVODGA) on our proposal to adopt new special provision W10. IVODGA supported placing W10 in column 7 of the HMT in order for the UN2208 & UN3486 entries to harmonize with the IMDG Code. DGAC recommended against placing W10 in column 7 of the HMT for the UN2208 & UN3486 entries. DGAC also requested that PHMSA elaborate as to why this change is needed on a safety basis. The IMO Sub-Committee on Dangerous Goods, Solid Cargoes and Containers (DSC) at their 14th session; decided not to assign LP02 to UN3486 to be consistent with the assignment of packing authorizations for UN2208, a material exhibiting similar characteristics. To remain harmonized with the IMDG Code PHMSA will be adopting W10 as proposed in the August 15, 2012 NPRM. Section 172.202 Section 172.202 establishes requirements for shipping descriptions on shipping papers. As part of these shipping paper requirements, in many situations a net or gross quantity of the hazardous materials transported must be included. At the 23rd meeting of the ICAO DGP, the issue of notation of quantities on shipping documents was raised. Specifically, it was noted that some confusion exists as to whether or not the net quantity or a gross mass is required on the shipping documents on particular shipments, such as limited qu#

Passage 63antities. At this meeting an amendment to the ICAO Technical Instructions was adopted to clarify what quantities (i.e. net or gross quantity) were required on the transport document for packages containing limited quantities when different hazardous materials are packed together in the same outer packaging. PHMSA is adopting a similar provision to the one addressed by the ICAO DGP discussed above. Specifically, PHMSA is adding a new paragraph (a)(6)(vii) stating that for shipments containing hazardous materials in limited quantities with a ``30 kg gross'' limit in Column (9A) or (9B) of the Sec. 172.101 Hazardous Materials Table and different hazardous materials packed together in the same outer packaging, the net quantity of each hazardous material followed by the gross mass of the completed package must be shown on the shipping paper. This clarification addresses a transport scenario currently not addressed in the HMR thus alleviating confusion regarding the shipping paper requirements of such shipments. Furthermore, this harmonizes the HMR with the ICAO Technical Instructions and avoids shipping paper discrepancies for international shipments. Section 172.203 This section details additional description requirements that are required for certain shipments of hazardous materials. PHMSA is amending paragraph (i)(3) to cross reference the IBR Sec. 171.7.#

Passage 64Section 172.301 This section details the general marking requirements for non-bulk packagings. Specifically, this section states what information (proper shipping name and identification number, technical names, consignee's or consignor's name, etc.) must be displayed on the outside of non-bulk packages. While the HMR requires that an identification number, preceded by ``UN'' or ``NA'' as appropriate, be marked on the outside of a non-bulk packaging a specific size of this marking is not specified. In this final rule, PHMSA is adding specific size requirements for the ``UN'' or ``NA'' markings. These markings must be marked in characters at least 12 mm (0.47 inches) high, however, packages with a maximum capacity of 30 liters (7.92 gallons) ,30 kg (66 pounds), or cylinders with a maximum water capacity of 60 liters (16 gallons) must be marked with characters at least 6 mm (0.2 inches) high and packages having a maximum capacity 5 liters (1.32 gallons) or 5 kg (11 pounds) or less must be marked in a size appropriate for the size of the package. PHMSA is adopting this minimum size marking for the ``UN'' or ``NA'' markings to align with newly adopted requirements in the 17th Revised Edition of the UN Model Regulations. PHMSA recognizes the importance of establishing a minimum size requirement for the internationally recognized ``UN'' identification number marking system. Without a minimum size requirement for hazard communication, shippers may mark packages in a format that makes it difficult for first responders to identify the commodity associated with a particular package. In response to the NPRM, PHMSA received several comments concerning this proposed requirement. DGAC and Dow suggested extending the compliance date for this provision to January 1, 2017 to allow companies time to make the transition, and for the depletion of both finished product and prepackaged inventory that do not meet the requirements of the proposal. Veolia noted that their company's propriety software produces markings that would not be in compliance with the proposed size limitations and that they would incur a cost to reprogram their system if the proposal is maintained. They further contended that in 20 years of displaying the marking they are unaware of any instances of the markings being questioned as being too small or illegible. Veolia requested that the minimum size requireme#

Passage 65nt apply to international shipments only. Stericycle and the HWI requested an exception to this marking requirement for dedicated carriers of regulated medical waste. These commenters stated that the proposed change would impose a significant cost on the industry. They requested an exception for the continued use of existing containers used to transport regulated medical waste and permanently marked with the applicable ``UN'' number. PHMSA accepts that many packages are currently marked in a manner that may not in all cases meet the new minimum size standards. In response to the comments raised to the NPRM we will provide, for domestic transportation, a transition period to continue using non-bulk packagings displaying ``UN'' or ``NA'' number markings in accordance with the requirements in effect on October 1, 2011 (i.e., no minimum size), until January 1, 2017. PHMSA maintains that there is benefit to harmonization in this case, and having a single standard outweighs the cost incurred by a company to revise its software and systems to produce compliant markings. The transition period for the continued use of the current markings in domestic transportation provides an opportunity for companies to revise their marking systems and maintain compliance. PHMSA is sympathetic to the assertion that the containers used to transport regulated medical waste are often permanently stamped with the ``UN'' number and the containers often have very long useful lives. Therefore PHMSA is also including an exception that allows packages that are permanently marked with the UN number (e.g., by embossing or through a heat stamp process) and are manufactured prior to January 1, 2017 to continue in service for the life of the container. DGAC noted that while an inch conversion was provided in the preamble there is no inch conversion noted in the regulations text. This was an oversight and has been corrected in this final rule. COSTHA questioned if the minimum size of the ``UN'' number markings should be dictated by the maximum capacity of the outer package or the inner packagings. COSTHA proposed an example package consisting of 2 inner packagings of 4 L each. Maximum capacity is defined in Sec. 171.8 as ``the maximum inner volume of receptacles or packagings.'' A package containing 2 inner packagings with a maximum capacity of 4 L each would have a maximum capacity of 8 L, and t#

Passage 66hus would require a 6 mm minimum UN number marking. It was also noted that the UNSCOE, at its 39th session, provided an exception from minimum marking size requirements for cylinders of 60 liters water capacity or less. PHMSA agrees that cylinder markings have historically been allowed provisions that would allow for smaller UN number markings than other non-bulk packages and is providing an exception for cylinders of 60 liters water capacity or less consistent with the recent UNSCOE exception. Therefore, with the aforementioned transition period, exceptions, and note, PHMSA is specifying a marking size consistent with package marking sizes adopted in the 17th Revised Edition of the UN Model Regulations. Section 172.312 Section 172.312 details the specific marking requirements for liquid hazardous materials in non-bulk packagings. Paragraph (a) of this section describes scenarios when package orientation arrows must be displayed on the outside of a package. Provided certain criteria are met, paragraph (c) excepts certain shipments from the requirements of paragraph (a) and thus, the requirement to display the package orientation arrows on the package. Currently Sec. 173.312(c)(3) states that when offered or intended for transportation by aircraft, packages containing flammable liquids in inner packagings of 120 mL (4 fluid oz.) or less prepared in accordance with Sec. 173.150(b) or (c) of this subchapter when packed with sufficient absorption material between the inner and outer packagings to completely absorb the liquid contents are not required to display the package orientation arrows on the outside of the package. The ICAO TI have been amended to extend this exception to the package orientation markings to all liquid hazardous materials in inner packagings of 120 mL (4 fluid oz.) when packed with sufficient absorption material between the inner and outer packagings to completely absorb the liquid contents. PHMSA is adopting this change, consistent with the amendment made to the ICAO TI to extend the exception for the display of the package orientation arrows to all liquid hazardous materials in inner packagings of 120 mL (4 fluid oz.) when packed with sufficient absorption material between the inner and outer packagings to completely absorb the liquid contents.#

Passage 67Section 172.407 This section provides label specifications. PHMSA is amending paragraph (f) to include a cross reference to the IBR Sec. 171.7. Section 172.604 Section 172.604 prescribes emergency response telephone number requirements. Paragraph (d) of this section provides a listing of materials that are excepted from the requirement to provide an emergency response telephone number on a shipping document. PHMSA is adding ``Krill Meal, PGIII'' to the list of materials excepted from the emergency response telephone number requirements. Krill meal poses similar hazards to fish scrap and meal; therefore, we are providing Krill meal with the same exception from the emergency response telephone number requirements as fish scrap and meal.#

Passage 68Part 173 of the HMR describes the general requirements for shipments and packagings of hazardous materials. Consistent with amendments adopted by the UN Model Regulations, PHMSA is adopting changes throughout the Part 173 packaging requirements to authorize more flexibility when choosing packages for hazardous materials. Specifically PHMSA is authorizing the use of the following packaging types and materials: The specific packaging requirements for Class 1 explosive materials are specified in Sec. 173.62. In this final rule PHMSA is revising Sec. 173.62 to authorize wood as an appropriate material used to construct receptacles, inner and outer intermediate packagings, and intermediate packagings/dividing partitions for certain explosives. Furthermore, PHMSA is authorizing the use of metals other than steel or aluminum in specification packagings, specifically drums (1N1 or 1N2) and boxes (4N), as appropriate. This authorization does not include chlorosilanes under Sec. 173.206 because of corrosion concerns. Otherwise, it authorizes the use of closed head drums where open head drums are generally permitted. PHMSA believes these amendments provide greater flexibility in packaging while maintaining an equivalent level of safety. Consistent with amendments adopted by the ICAO Technical Instructions, PHMSA is adopting changes in various sections on Part 173 where certain articles, items, and materials are excepted from the requirements of the subchapter. There is a potential for these excepted articles, items, and materials to be inappropriately carried aboard an aircraft by passengers or crewmembers. The changes will address this concern by clarifying that certain excepted articles, items and materials, identified by ICAO as posing a safety risk, must be transported as cargo and cannot be carried onboard an aircraft by passengers or crewmembers as carry-on baggage, checked baggage, or on their person unless specifically excepted by Sec. 175.10, ``Exceptions for Passengers, Crewmembers, and Air Operators.'' The amended sections include Sec. Sec. 173.159a, 173.162, 173.164, 173.175, 173.219, and 173.306. For UN3166 and UN3268, Special Provision A200 is created to communicate this requirement and a reference to special provision A200 is placed in column 7 of the HMT for these entries. In response to the NPRM, COSTHA and Mercotac, suggested changes to regulatory tex#

Passage 69t language to eliminate confusion that these items may only be able to be transported as cargo. PHMSA has revised the language in Sec. Sec. 173.159a, 173.162, 173.175, 173.219, and 173.306 to be consistent with the language in special provision A200 that these excepted articles, items and materials must be transported as cargo and cannot be carried onboard an aircraft by passengers or crewmembers as carry-on baggage, checked baggage, or on their person unless specifically excepted by Sec. 175.10. PHMSA received one comment from the FCHEA requesting that we amend Sec. 175.10(a)(19) to allow fuel cell cartridges containing flammable gas in division 2.1 and fuel cells containing water reactive materials in division 4.3 in checked passenger baggage. PHMSA did not propose changes to the provisions allowing for the checking limited types of fuel cells in the NPRM, and consider this request to be outside the scope of this rulemaking. Section 173.4b This section specifies exceptions for materials packaged in de minimus quantities. In the NPRM, PHMSA proposed and is subsequently adopting in this final rule, an exception in Sec. 175.10(a)(22) to permit non-infectious specimens packaged in accordance with Sec. 173.4b(b) to be carried aboard an aircraft by passengers and crewmembers in checked or carry-on baggage or on their person. In the NPRM we inadvertently neglected to revise the language in Sec. 173.4b(b)(8) to recognize this exception. In this final rule, PHMSA is revising Sec. 173.4b(b)(8) to reference the adopted exception in Sec. 175.10(a)(22). Section 173.12 This section specifies the exceptions for shipment of waste materials including the requirements for waste packages known as ``lab packs.'' A lab pack, although not specifically defined in Sec. 171.8, is considered a large outer packaging containing small inner packagings that are filled with various compatible laboratory hazardous wastes. Paragraph (b) of this section specifies the authorized inner and outer packagings for lab packs. In this final rule, PHMSA is revising paragraph (b)(2)(ii)(a) of this section by adding 1N2 metal drums to the permitted outer packagings currently authorized for a lab pack. Section 173.21 Section 173.21 prescribes materials and packages forbidden for transport. In this final rule, PHMSA is correcting the IMDG Code section reference to control temperature requirements in Se#

Passage 70c. 173.21(f)(3)(ii) from 7.7 to 7.3.7. Section 173.37 Currently, the HMR does not include a section that prescribes general requirements for packaging hazardous materials in Flexible Bulk Containers (FBCs). In this final rule, PHMSA is adding such requirements in new Sec. 173.37 in a similar format to the general requirements for other bulk and large packagings (e.g., portable tanks, IBCs, etc.) in subpart B of part 173. This section includes, but is not be limited to, requirements addressing the initial use and reuse of FBCs, capacity requirements and general transport conditions. Consistent with the use and reuse requirements of other large and bulk packagings, the general requirements in part 173 complement the construction and manufacture specifications for such bulk packagings in part 178 of the HMR. PHMSA is authorizing the reuse of FBCs. The FBC must be given a visual examination prior to reuse. Furthermore, the general requirements for FBCs specify that FBCs must be transported in a conveyance with rigid sides and ends that extend at least two-thirds the height of the FBC, must not be offered for transportation in freight containers, and may not exceed 15 cubic meters in capacity. Section 173.50 Section 173.50 provides definitions for the various divisions of Class 1 (explosives) referenced in Subpart C of Part 173. Paragraph (b) of this section notes that Class 1 (explosives) are divided into six divisions. Division 1.6 is described as an explosive consisting#

Passage 71``of extremely insensitive articles that do not have a mass explosive hazard. This division is comprised of articles that contain only extremely insensitive detonating substances and that demonstrate a negligible probability of accidental initiation or propagation.'' In this final rule, PHMSA is removing the word ``detonating'' from this definition to align with the revised definition provided in the 17th Revised Edition of the UN Model Regulations. Section 173.56 Section 173.56 prescribes the definition of new explosives and provides explosive (Class 1) classification and approval requirements. Paragraph (h) of Sec. 173.56 states that small arms ammunition, within certain parameters is not subject to the approval requirements of the rest of Sec. 173.56. PHMSA received a comment from SAAMI requesting that PHMSA amend Sec. 173.56 to except Cases, cartridge, empty with primer and Cartridges for tools, blank from the approval requirements of Sec. 173.56. SAAMI noted that for Cartridges for tools, blank the switch from UN 0323 to UN 0014 could necessitate new EX approvals for products which are essentially identical to those already exempted. SAAMI noted that Cases, cartridge, empty with primer refers to small arms cartridges with no bullet or propellant but with a primer, just an empty primed case. SAAMI stated that Cases, cartridge, empty with primer of 50 caliber or less clearly meet the intent and equivalent level of safety to products already referenced in 173.56(h). PHMSA is amending Sec. 173.56(h) to ensure Cartridges for tools, blank that meet the conditions of that paragraph are excepted from the requirements of the rest of this section. PHMSA believes this to be a natural extension of the intent of the exception in Sec. 173.56(h) as well as a necessary domestic change that is a direct result of international rulemaking. PHMSA will not be adding Cases, cartridge, empty with primer to Sec. 173.56(h). PHMSA believes Cases, cartridge, empty with primer to be materially different from those articles currently authorized for the exception in Sec. 173.56(h). The proposed addition of Cases, cartridge, empty with primer to Sec. 173.56(h) is also not a direct result of international rulemaking and this rulemaking vehicle is not suited for such a proposal. Section 173.59 Section 173.59 provides definitions of explosive terms related to the transport and classific#

Passage 72ation of explosives used throughout subpart C of part 173. These definitions are intended for information only and are not to be used for purposes of classification or to replace proper shipping names prescribed in Sec. 172.101. In the UN Model Regulations, Appendix B to Chapter 3 contains a similar list of explosive definitions which are also intended for information only and are not to be used for purposes of hazard classification. In April 2010, the United States and the United Kingdom submitted a formal document regarding proposed modifications to the UN test series 7 for consideration by the UN Subcommittee of Experts on the Transport of Dangerous Goods. Test series 7 is used to classify explosives into the appropriate class.\1\ This paper sought to modify the test series 7 to more accurately address the classification of Division 1.6. Specifically, Division 1.6 is for extremely insensitive detonating articles and the proposed changes in the US/UK paper are designed to ensure that the probability of accidental initiation or propagation of an article attaining this division remains negligible. --------------------------------------------------------------------------- \1\ The scientific data regarding the adoption of these modifications are presented in working paper ST/SG/AC.10/C.3/2010/40 entitled ``Proposed modifications to Test Series 7.'' This paper can be viewed at the following URL: http://www.unece.org/fileadmin/DAM/trans/doc/2010/ac10c3/ST-SG-AC10-C3-2010-40e.pdf. ---------------------------------------------------------------------------#

Passage 73In the 17th Revised Edition of the UN Model Regulations, the proposals presented in the US/UK paper regarding the UN test series 7 were adopted. Among the adopted proposals was the addition of various explosive specific definitions referencing the modifications to the UN test series 7. In this final rule, we are revising the various definitions prescribed in Sec. 173.59. Specifically, we revised the definition for ``Articles, explosive, extremely insensitive (Articles, EEI)'' by removing the word ``detonating'' and adding the words ``tools'' after ``starter pistols'' in the definition for ``Cartridges, blank.'' We also replaced the definition for ``Explosive, extremely insensitive detonating substances (EIDS)'' with a new definition for ``Explosive, extremely insensitive substances (EIS).'' Lastly, we added a definition for ``Auxiliary explosive component, isolated.'' The addition of and revisions to these definitions provide consistency with international regulations and clarity when utilizing the UN test series 7 for explosive classification. PHMSA received one comment form SAAMI that requested we revise the proposed definition of Cartridges, blank. The definition proposed by SAAMI was ``Cartridges, blank. Articles that consist of a cartridge case with a center or rim fire primer, with or without a confined charge of smokeless or black powder, but with no projectile. Used in training, saluting, or in starter pistols, tools, etc.'' SAAMI's proposal would remove the requirement for Cartridges, blank to contain a confined charge of smokeless powder. This SAAMI proposed definition is not consistent with the UN adopted definition for Cartridges, blank. Additionally adopting the definition proposed by SAAMI may conflict with the standing definition for Cases, cartridge empty with, primer. For the aforementioned reasons, PHMSA is adopting the definition as proposed in the August 15, 2012 NPRM. Section 173.62 Section 173.62 prescribes the specific packaging requirements for explosives. These packaging requirements stipulate the permitted inner, intermediate, and outer packagings as well as any specific additional packaging information. These packaging requirements are generally aligned with the requirements stipulated in the UN Model Regulations. In this final rule, PHMSA is revising various packaging provisions in the ``Table of Packing Methods'' in this section#

Passage 74to align with changes adopted in the 17th Revised Edition of the UN Model Regulations. The revisions to the authorized packaging methods provide greater flexibility when packaging explosives while retaining an appropriate level of safety. These changes include, but are not limited to, permitting various explosives to be transported in closed head drums in addition to the already permitted removable head drums and adding the option to utilize wooden inner and intermediate packagings in various packaging provisions. Section 173.63 Section 173.63 provides packaging exceptions for specific types of low hazard explosive materials including certain detonators, small arms ammunition and detonating cord. PHMSA received one comment from SAAMI requesting that PHMSA clarify its intent to allow these articles to display either the ground limited quantity mark or the air limited quantity mark regardless of the mode of transport. In this final rule PHMSA is clarifying the language in Sec. 173.63(b)(2) to clearly state that a limited quantity of 1.4S material may be marked with either the surface or the air limited quantity#

Passage 75marking regardless of mode of transport. However, PHMSA also notes that in October of 2012 the ICAO Dangerous Goods Panel Working Group of the Whole (DGP-WG/12) considered, but did not adopt, a proposal to authorize limited quantities of certain 1.4S articles. DGP-WG/12 did note that packages bearing the limited quantity marking of other modes could still be accepted for air transport provided all additional requirements of the ICAO Technical Instructions were met. As a result of the DGP-WG/12 decision PHMSA and FAA believe retaining the option to display the air limited quantity marking by all modes may result in confusion and potentially frustrate shipments of packages that display the air limited quantity marking in air transit. As a result of the recent DGP-WG/12 decision PHMSA and FAA plan to consider removing the authorization to display the air limited quantity marking for limited quantity materials packaged in accordance with Sec. 173.63(b)(2) in a future rulemaking, as such a change was not proposed in the NPRM to this final rule. PHMSA received one comment from SAAMI requesting that the recent UN assignment of limited quantity packaging authorizations to Cases, cartridges, empty with primer (UN0055) be extended to this commodity in the HMR. PHMSA agrees and has made the relevant text changes to Sec. 173.63. SAAMI also commented that the ORM-D entries removed from the table should be left until the expiration of the transitional period for their use. PHMSA agrees and has inserted those proper shipping names back into Sec. 173.63. Section 173.115 Section 173.115 prescribes the definitions for Class 2 materials. Paragraph (k) of this section specifies how the oxidizing ability of certain Division 2.2 gases is determined. Currently, the HMR references ISO standards that include test and calculations used to determine the oxidizing ability of certain Division 2.2 gases. The UN Model Regulations and the ICAO Technical Instructions replace references to ISO standards 10156:1996 and 10156-2:2005 with the updated version ISO 10156:2010. Based on its technical review, PHMSA believes the updated standard provides an adequate level of safety and is referencing the standard in this section and adding it to the list of IBR materials in Sec. 171.7. Section 173.121 Section 173.121 prescribes the requirements for selection of packing groups for Class 3 flammable li#

Passage 76quids. Paragraph (b) of this section describes the criteria for inclusion of viscous Class 3 materials in Packing Group III. ICAO adopted requirements in the Technical Instructions that increased the quantity of viscous Class 3 flammable liquids permitted reclassification from Packing Group II to Packing Group III from 30 L (7.9 gal) per package to 100 L (26.42 gal) per package when offered for transport by cargo aircraft. In this final rule, PHMSA is expanding the per package amounts of viscous Class 3 material meeting the requirements in Sec. 173.121(b). The increase will facilitate multi-modal transportation by permitting shipments offered by highway, rail, and cargo-carrying aircraft to utilize the same 100 L criteria. Section 173.134 Provisions contained in the UN Model Regulations, Chapter 2.6, Class 6--Toxic and Infectious Substances, relating to the transportation of medical devices and equipment, have been amended to except medical equipment which has been drained of free liquid from the requirements of the UN Model Regulations. In addition, except for medical devices or equipment being transported for disposal, or medical devices or equipment contaminated with or suspected of contamination with a Category A infectious substance, the UN Model Regulations have been amended to exempt medical devices or equipment potentially contaminated with or containing infectious substances which are being transported for disinfection, cleaning, sterilization, repair or equipment evaluation from all other requirements of the UN Model Regulations, provided they meet certain packaging requirements. PHMSA is amending Sec. 173.134, ``Class 6, Division 6.2-- Definitions and Exceptions'' by adopting the additional exemptions for medical devices and equipment. Section 173.158 Section 173.158 prescribes packaging requirements for nitric acid mixtures of varying concentrations. PHMSA is revising the list of outer packagings permitted for nitric acid mixtures of varying concentrations. Specifically, PHMSA is revising paragraph (d)(2) by adding 1N2, 4A, 4B and 4N packagings to the list of authorized outer packagings of combination packages for Nitric acid of 90 percent or greater concentration, when offered for transportation or transported by rail, highway, or water, in addition to the packaging options currently authorized. PHMSA is also revising paragraph (e) of this secti#

Passage 77on pertaining to nitric acid of less than 90 percent concentration, when offered for transportation or transported by rail, highway, or water. Specifically, this paragraph is revised to permit packagings of specification 4A, 4B, or 4N metal boxes for certain nitric acid concentrations. Further, PHMSA is revising paragraphs (f)(3), (g) and (h) by adding specification 1N2, 4A, 4B and 4N packagings to the list of authorized outer packagings of combination packagings for Nitric acid of the following concentrations; (1) Nitric acid of 70 percent or less concentration, when offered for transportation or transported by rail, highway, or water; (2) Nitric acid of more than 70 percent concentration, when offered for transportation or transported by cargo aircraft only; and (3) Nitric acid of less than 70 percent concentration, when offered for transportation in cargo aircraft only. The addition of these packaging options will increase flexibility for shippers when determining the appropriate packaging for nitric acid mixtures, in addition to the packaging options currently authorized. Section 173.159a Section 173.159a provides exceptions for non-spillable batteries. Paragraph (d) of this section excepts non-spillable batteries from the requirements of the HMR provided certain criteria, including specific packaging requirements and the absence of free-flowing liquid in the battery, are met. In this final rule, PHMSA is clarifying paragraph (d) of this section by adding a new subparagraph (d)(3) stating that ``for transport by aircraft, must be transported as cargo and may not be carried onboard an aircraft by passengers or crewmembers in carry-on baggage, checked baggage, or on their person unless specifically excepted by Sec. 175.10.'' This clarification will align the HMR with the previously discussed changes made to the ICAO TI with regard to the air transport of non-spillable batteries that are excepted from the HMR. Section 173.160 Section 173.160 prescribes packaging requirements for ``Bombs, smoke, non-explosive'' when shipped without ignition devices. PHMSA is revising the#

Passage 78list of packagings permitted for ``Bombs, smoke, non-explosive'' shipped without ignition devices. Specifically, PHMSA is adding the authorization to use metal (4A, 4B, and 4N), fiberboard (4G) or solid plastic (4H2) boxes, or metal (1A2, 1B2, and 1N2), plastic (1H2), plywood (1D), or fiber (1G) drums. Section 173.162 Section 173.162 prescribes the packaging requirements for ``UN2803, Gallium.'' PHMSA is revising paragraph (a)(1), to permit both open and closed steel, metal, other that steel and aluminium drums (1A1, 1N1, 1N2, 1H1, 3A2 or 3H2) in addition to the packaging options currently authorized. Further, PHMSA is revising paragraph (a)(2), to permit metal, other than steel or aluminium (4N) boxes; metal, other than steel or aluminium drums (1N1, 1N2); and plastic drums (1H1 or 1H2) in addition to the packaging options currently authorized. In addition, PHMSA is clarifying paragraph (c) by stating that ``for transport by aircraft, must be transported as cargo and may not be carried onboard an aircraft by passengers or crewmembers in carry-on baggage, checked baggage, or on their person unless specifically excepted by Sec. 175.10.'' This clarification will align the HMR with the previously discussed changes adopted in the ICAO Technical Instructions regarding the air transport of gallium otherwise excepted from the HMR. Section 173.164 Section 173.164 prescribes the packaging requirements for Mercury (metallic and articles containing mercury). In this final rule, PHMSA is revising paragraph (a)(1), to permit steel drums; metal, other that steel and aluminum drums (1A1, 1N1, 1N2) and metal, other than steel or aluminum boxes (4N), in addition to the packaging options currently authorized in paragraphs (a), (b) and (c). Paragraph (f) is added to provide an exception to the requirements of the HMR for vessel transport of manufactured articles or instruments containing less than 0.45 kg (1.0 pound) of mercury. This exception is inserted to mirror an existing IMDG Code provision and harmonize the requirements for vessel shipments of mercury contained in manufactured articles as much as possible. In addition, PHMSA is clarifying paragraphs (a)(5), (b), and (c)(2) of this section by adding the phrase ``when transported as cargo.'' This clarification will align the HMR with the previously discussed changes adopted in the ICAO Technical Instructions regarding the#

Passage 79air transport of manufactured articles containing mercury otherwise excepted from the HMR. Section 173.165 Section 173.165 prescribes the transport and packaging requirements for polyester resin kits. PHMSA is revising Sec. 173.165 to better align the packaging and other requirements for UN3269, Polyester resin kits with the various international modal standards. These amendments correct inconsistencies adopted in a final rule published in the Federal Register on January 19, 2011 (76 FR 3308; HM-215K). Section 173.175 Section 173.175 prescribes the transport and packaging requirements for permeation devices. Currently, permeation devices containing hazardous materials that are used for calibrating air quality monitoring devices are not subject to the HMR provided they meet specific requirements that include packaging, quantity limitations, testing, and transport controls. PHMSA is adding a new paragraph (g) stating that ``for transport by aircraft, must be transported as cargo and may not be carried onboard an aircraft by passengers or crewmembers in carry-on baggage, checked baggage, or on their person unless specifically excepted by Sec. 175.10.'' This clarification aligns the HMR with changes adopted in the ICAO Technical Instructions regarding the air transport of permeation devices that are otherwise excepted from the HMR. Section 173.176 Electric double layer capacitors are devices that store but do not produce electrical energy. They contribute to increased fuel efficiency in many alternative energy solutions such as hybrid vehicles. Some double layer capacitors contain flammable liquid absorbed in a solid with small amounts present as free liquid while others use a liquid electrolyte. Currently, the HMR do not contain specific requirements to address the transport of electric double layer capacitors. New Section 173.176 addresses electric double layer capacitors, prescribing the testing, marking, safety, and packaging requirements for electric double layer capacitors with an energy storage capacity greater than 0.3 Wh. PHMSA is incorporating these requirements consistent with the 17th Revised Edition of the UN Model Regulations. These amendments address potential electrical and other hazards arising from the release of hazardous materials during the transportation of these articles. Section 173.181 Section 173.181 prescribes the non-bulk packaging r#

Passage 80equirements applicable to pyrophoric liquids. Paragraph (b) of this section specifies the specification boxes authorized to package these substances. PHMSA is revising paragraph (b) by adding packaging authorizations for steel boxes (4A), aluminum boxes (4B), metal boxes, other than steel or aluminum (4N), or fiberboard boxes (4G); steel drums (1A1 or 1A2), aluminum drums (1B1 or 1B2), metal drums, other than steel or aluminum (1N1 or 1N2), plywood drums (1D), or fiber drums (1G); or steel jerricans (3A1 or 3A2) or aluminum jerricans (3B1 or 3B2). Section 173.183 Section 173.183 prescribes the packaging requirements for nitrocellulose base film. To provide greater flexibility in packaging selection, PHMSA is adding other metal drums (4A2), aluminum jerricans (3B2), and steel, aluminum or other metal (4A, 4B, 4N) boxes, to the list of authorized packagings. Section 173.184 Section 173.184 provides the definition and packaging requirements for highway or rail fusees. To provide greater flexibility in packaging selection, steel (1A2), aluminum (1B2) or other metal (1N2) drums; steel (3A2) or aluminum (3B2) jerricans; and steel (4A), aluminum (4B) or other metal (4N) boxes are added to the list of authorized packagings. Section 173.186 Section 173.186 provides definitions and packaging requirements for various types of matches. To provide greater flexibility in packaging selection, PHMSA is adding packaging options to the list permitted for strike-anywhere matches specified in paragraph (f) of this section. Specifically steel drums (1A1 or 1A2), aluminum drums (1B1 or 1B2), other metal drums (1N1, 1N2), steel jerricans (3A1, 3A2), aluminum jerricans (3B1, 3B2), steel (4A), aluminum (4N) and other metal (4N) boxes are added to the list of authorized packagings. Section 173.187 Section 173.187 prescribes the packaging requirements for pyrophoric solids, metals or alloys, n.o.s. To provide greater flexibility in packaging selection, PHMSA is adding packaging#

Passage 81options to the list permitted for pyrophoric solids, metals or alloys, n.o.s. specified in paragraph (a) and (d) of this section. Specifically, steel, aluminum or other metal boxes (4A, 4B or 4N) are added to the list of authorized packagings in paragraph (a). In addition, steel, aluminum or other metal drums (1A1, 1A2, 1B1, 1B2, 1N1 or 1N2) are added to the list of authorized packagings in paragraph (d). Section 173.188 Section 173.187 prescribes the packaging requirements for white and yellow phosphorus. To provide greater flexibility in packaging selection, steel, aluminum or other metal boxes (4A, 4B or 4N) are added to the list of authorized packagings in paragraph (a)(1). In addition, PHMSA is adding steel, aluminum or other metal drums (1A1, 1B1 or 1N1) not over 250 L (66 gallons) capacity each and steel, aluminum or other metal drums (1A2, 1B2, or 1N2) not over 115 L (30 gallons) capacity each, to the list of authorized packagings in paragraph (a)(2). Section 173.189 Section 173.189 prescribes the packaging and transport requirements for batteries containing sodium or cells containing sodium. To provide greater flexibility in packaging selection, PHMSA is adding 1N2, 4A, 4B, 4N, 4H1, 3A2, 3B3 and 3H2 outer packagings to the list of authorized outer packagings in paragraph (b). Section 173.193 Section 173.193 prescribes the packaging requirements for bromoacetone, methyl bromide, chloropicrin and methyl bromide or methyl chloride mixtures. To provide greater flexibility in packaging selection, metal boxes (4A, 4B or 4N) are added to the list of authorized outer packagings in paragraph (a). Section 173.194 Section 173.194 prescribes the packaging requirements for gas identification sets. To provide greater flexibility in packaging selection, metal boxes (4A, 4B or 4N) are added to the list of authorized outer packagings in paragraphs (b)(1) and (b)(2). Section 173.196 Section 173.196 prescribes the packaging requirements for Category A infectious substances. To provide greater flexibility in packaging selection, PHMSA is adding drums (1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 1H1, 1H2, 1D, 1G); boxes (4A, 4B, 4N, 4C1, 4C2, 4D, 4F, 4G, 4H1, 4H2); or jerricans (3A1, 3A2, 3B1, 3B2, 3H1, 3H2) as examples of the types of authorized ``rigid outer packaging'' referenced in paragraph (a)(3). Section 173.199 Section 173.199 prescribes the packaging requirements for categor#

Passage 82y B infectious substances. Paragraph (d) of this section provides the requirements for refrigerated or frozen specimens in ice, dry ice or liquid nitrogen. These provisions include the requirement to secure secondary packages. Consistent with an editorial amendment to Packing Instruction P650 in the 17th Revised Edition of the UN Model Regulations, PHMSA is removing the language ``position after the ice or dry ice has dissipated'' from the requirements to secure secondary packages. Section 173.201 Section 173.201 prescribes the authorized non-bulk packagings for liquid hazardous materials in packing group I. To provide greater flexibility in packaging selection, PHMSA is adding ``Metal box other than steel or aluminum: 4N'' to authorized outer packagings of combination packagings listed in paragraph (b) of this section. Section 173.202 Section 173.202 prescribes the authorized non-bulk packagings for liquid hazardous materials in packing group II. To provide greater flexibility in packaging selection, PHMSA is adding ``Metal box other than steel or aluminum: 4N'' to the authorized outer packagings of combination packagings indicated in paragraph (b). Section 173.203 Section 173.203 prescribes the authorized non-bulk packagings for liquid hazardous materials in packing group III. To provide greater flexibility in packaging selection, PHMSA is adding ``Metal box other than steel or aluminum: 4N'' to the authorized outer packagings of combination packagings indicated in paragraph (b). Section 173.211 Section 173.211 prescribes the authorized non-bulk packagings for hazardous materials in packing group I. To provide greater flexibility in packaging selection, PHMSA is adding ``Metal box other than steel or aluminum: 4N'' to the authorized outer packagings of combination packagings indicated in paragraph (b) and the single packagings authorized in paragraph (c). Section 173.212 Section 173.212 prescribes the authorized non-bulk packagings for hazardous materials in packing group II. To provide greater flexibility in packaging selection, PHMSA is adding ``Metal box other than steel or aluminum: 4N'' to authorized outer packagings of combination packagings indicated in paragraph (b). Further, we are adding ``Metal box other than steel or aluminum: 4N'' and ``Metal box other than steel or aluminum with liner: 4N'' to authorized single packagings permitted in paragra#

Passage 83ph (c) of this section. Section 173.213 Section 173.213 prescribes the authorized non-bulk packagings for hazardous materials in packing group III. To provide greater flexibility in packaging selection, PHMSA is adding ``Metal box other than steel or aluminum: 4N'' to the authorized outer packagings of combination packagings indicated in paragraph (b). Further, we are adding ``Metal box other than steel or aluminum: 4N'' and ``Metal box other than steel or aluminum with liner: 4N'' to the single packagings authorized in paragraph (c). Section 173.219 Section 173.219 prescribes the transport conditions and packaging requirements for life saving appliances. Paragraph (b) of this section provides a list of hazardous materials that a life-saving appliance is permitted to contain as well as other transport requirements. Currently, the transport conditions specified in paragraph (b)(1) of this section specify that Division 2.2 compressed gases, including oxygen are permitted; however, oxygen generators are not. In this final rule, PHMSA is broadening the materials permitted in life-saving appliances by modifying paragraph (b)(1) to include liquefied gases as well. Paragraph (c) of this section prescribes the packaging requirements and exceptions provided for life saving appliances. Subsequent changes are proposed to paragraph (c)(1) of this section to reflect this inclusion of liquefied gases discussed previously. Furthermore, paragraph (c)(5) currently states that, for other than transportation by aircraft, life-saving appliances containing no hazardous materials other than carbon dioxide with a capacity not exceeding 100 cm\3\ are not subject to the provisions of this subchapter provided they are overpacked in rigid outer packagings with a maximum gross mass of 40 kg. In this final rule, PHMSA is#

Passage 84revising the exception in (c)(5) by replacing the language ``carbon dioxide'' with ``cylinders of Division 2.2 compressed or liquefied gases with no subsidiary risk,'' and the quantity limit ``100 cm\3\'' with ``120 mL, installed solely for the purpose of activating the appliance.'' In addition, we are further clarifying paragraph (c)(5) of this section by adding the statement, ``For transportation by aircraft, such appliances must be transported as cargo and may not be carried onboard an aircraft by passengers or crewmembers in carry-on baggage, checked baggage, or on their person unless specifically excepted by Sec. 175.10.'' This clarification aligns the HMR with the recently adopted changes in the ICAO Technical Instructions regarding the air transport of life saving appliances that would otherwise be excepted from the HMR. Section 173.220 Section 173.220 prescribes packaging requirements for internal combustion engines, self-propelled vehicles, mechanical equipment containing internal combustion engines, battery-powered equipment or machinery, fuel cell-powered equipment or machinery. In this rule PHMSA is amending paragraph (d) to cross reference the IBR Sec. 171.7. Section 173.221 Section 173.221 prescribes the non-bulk packaging requirements for Polymeric beads (or granules), expandable, evolving flammable vapor and Plastic molding compound in dough, sheet or extruded rope form, evolving flammable vapor. PHMSA is adding the following packaging authorizations: metal (4A, 4B, or 4N), and plastic (4H1 or 4H2) drums, and 1N1, 1N2 drums in vapor tight metal or plastic jerricans (3A1, 3A2, 3B1, 3B2, 3H1, or 3H2). PHMSA is also adding a paragraph to the section that reference the reader to a newly created Sec. 176.907 for cargo transport and hazard communication marking requirements for shipments of Polymeric beads expandable, evolving flammable vapor and Plastic molding compound in dough, sheet or extruded rope form, evolving flammable vapor when transported by vessel. These changes address the safety hazard presented by shipments of polymeric beads or plastic molding compounds off-gassing flammable vapors during vessel transport. See Section 176.907 for a detailed discussion of our addition of these vessel cargo transport requirements. Section 173.225 Section 173.225 prescribes the packaging requirements and other provisions for organic peroxides. Packagi#

Passage 85ng requirements for organic peroxides are very specific and include requirements for the concentration by mass permitted, diluents percentage, water mass, temperature controls and organic peroxide specific packing methods. Paragraph (c) of this section contains and describes the organic peroxide table and how specific organic peroxides are to be transported. In addition, paragraph (e) contains a separate table that prescribes the packaging requirements for organic peroxides packaged in IBCs. As self-insulating hazardous materials, organic peroxides can pose different risks when transported in larger quantities. Thus, a separate table unique to the transport of these substances in IBCs is contained in the HMR. The ``Organic Peroxide IBC Table'' includes maximum quantities permitted to be packaged and any temperature and emergency controls. The organic peroxides tables in paragraphs (c) and (e) specify by technical name those organic peroxides that are authorized for transportation and not subject to the approval provisions of Sec. 173.128. An organic peroxide identified by technical name is authorized for transportation only if it conforms to all applicable provisions of these tables. In this final rule, we are amending the Organic Peroxides Tables in Sec. 173.225 by adding new entries and revising current entries to account for new organic peroxides and formulations that are commercially available. The following entries are added in the Sec. 173.225(c) organic peroxides table: UN3106, ``([3R-(3R,5aS,6S,8aS,9R,10R,12S,12aR**)]-Decahydro-10methoxy- 3,6,9-trimethyl-3,12-epoxy-12H-pyrano[4,3-j]-1,2-benzodioxepin)'' UN3110, ``3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane'' UN3119, ``Di-(3,5,5-trimethylhexanoyl) peroxide'' The following current entries in the Sec. 173.225(c) organic peroxides table are amended: UN3115, ``Diisopropyl peroxydicarbonate'' UN3115, ``Di-(3,5,5-trimethylhexanoyl) peroxide'' The following entries are added to the Sec. 173.225(e) Organic Peroxide IBC Table: UN3119 ``Diisobutyryl peroxide, not more than 28% as a stable dispersion in water'' UN3119, ``Diisobutyryl peroxide, not more than 42% as a stable dispersion in water'' The following entries are amended in the Sec. 173.225(e) Organic Peroxide IBC Table:#

Passage 86UN3119 ``Di-(3,5,5-trimethylhexanoyl) peroxide, not more than 38% in diluent type A'' UN3119 ``1,1,3,3-Tetramethylbutyl peroxyneodecanoate, not more than 52%, stable dispersion, in water'' Section 173.226 Section 173.226 prescribes the packaging requirements for Materials poisonous by inhalation, Division 6.1, Packing Group I, Hazard Zone A. Specifically, this section authorizes the transport of Materials poisonous by inhalation, Division 6.1, Packing Group I, Hazard Zone A in specification cylinders, specification drums packaged further in specification drums and combination packages. PHMSA is revising the requirements of paragraph (c) by adding an authorization to package such materials in ``Metal box other than steel or aluminum: 4N'' drums. In addition, PHMSA is correcting an editorial error by replacing the incorrect wording ``Expanded plastic box: 4H2'' with the correct wording ``Expanded plastic box: 4H1.'' Section 173.230 Section 173.230 prescribes the transport requirements for fuel cell cartridges containing hazardous material. Paragraph (e) of this section prescribes the packaging requirements for fuel cell cartridges containing hazardous material. Furthermore, paragraph (e)(2)(ii) notes that ``Fuel cell cartridges contained in equipment must be protected against short circuits and the entire fuel cell system must be protected from unintentional activation. The equipment must be securely cushioned in the outer packaging.'' As currently stated in the HMR, this requirement may imply that only fuel cell cartridges contained in equipment, not the fuel cell system, would have to be protected against short circuits. This is not the intent of this requirement. Therefore, PHMSA is clarifying that the entire fuel cell system must be protected against short circuits and unintentional activation. Section 173.240 Section 173.240 prescribes the bulk packagings authorized for certain low hazard solid materials. As discussed previously, PHMSA is adopting flexible bulk container provisions throughout the HMR.#

Passage 87In this section, PHMSA is adding paragraph (f) that authorizes the use of FBCs for certain low hazard solid materials. Specifically, paragraph (f) permits the use of FBCs if B120 is indicated in Column (7) of the specific entry in Sec. 172.101 HMT and the FBC conforms to the requirements in subparts R and S of part 178 of the HMR. Furthermore, paragraph (f) notes that FBCs may not be used for Packing Group I or II hazardous materials. Only select low hazard solid materials are authorized for transport in FBCs. The use of FBCs for the transportation of an HMT entry not assigned special provision B120 is prohibited. Section 173.301b Section 173.301b provides additional general requirements for shipment of UN pressure receptacles. Recent international adoption of this standard leads PHMSAto incorporate by reference ISO 13340:2001(E) Transportable gas cylinders--Cylinder valves for non-refillable cylinders--Specification and prototype testing, First edition, 2004-04- 01, and require all non-refillable UN pressure receptacle valves to be in compliance with this standard. Section 173.306 Section 173.306 prescribes the exceptions for limited quantities of compressed gases including aerosols. Paragraph (a) of this section prescribes the general requirements for limited quantities of compressed gases while paragraph (j) specifically addresses aerosols and receptacles small, containing gas, with a capacity of less than 50 mL. In this final rule, we are revising paragraph (j) to note that aerosols conforming to this paragraph, when offered for transportation by air, must be transported as cargo and may not be carried onboard an aircraft by passengers or crewmembers in carry-on baggage, checked baggage, or on their person unless specifically excepted by Sec. 175.10. This clarification aligns the HMR with the previously discussed changes adopted in the ICAO Technical Instructions regarding the air transport of aerosols that are otherwise excepted from the HMR. Section 173.313 Section 173.313 contains instructions for UN portable tanks and the table for liquefied compressed gases. The UN Portable Tank Table for Liquefied Compressed Gases is referenced in Sec. 172.102(c)(7)(iii) of the HMR for portable tanks used to transport liquefied compressed gases. Chemical manufacturers throughout the world are currently supplying pressurized products contained and transported in gas#

Passage 88cylinders. The products are liquids or solids such as adhesives, coatings and cleaners combined with a gas or gas mixtures in pressure receptacles under sufficient pressure to expel the contents. These mixtures are typically expelled from the pressurized receptacles as foams, streams or thick sprays. Under the current HMR these types of products are classified as liquefied gases and transported in accordance with the applicable sections for the liquefied gases in which they are classified. A typical product however is a combination of a propellant (gas phase) and a liquid or solid component, and therefore the term liquefied gas does not correctly reflect the contents. As they are not filled in aerosol dispensers and as the receptacles used exceed the volume limitations for aerosols, they may not be transported as aerosols. The United Nations Sub-Committee of experts on the Transportation of Dangerous goods agreed to create new entries (UN numbers) for these products to address their unique characteristics and corresponding regulations to address the safe transport of such materials. In this final rule, we are adopting entries in the HMT for various chemicals under pressure and the corresponding packaging provisions. We are modifying Sec. 173.313 to include the packaging requirements for chemicals under pressure transported in portable tanks. Specifically, we are revising the section title, introductory test, and table name to reflect that chemicals under pressure are addressed in this section. We are also adding table entries for identification numbers UN3500, UN3501, UN3502, UN3503, UN3504 and UN3505. Lastly, we are correcting the maximum filling density for UN3220. The addition of packaging requirements specific to chemicals under pressure will ensure that an appropriate level of safety is achieved for these unique materials. PHMSA participated in, and concurs with, the discussions and decisions regarding the packagings selected for these materials. The packagings adopted by the UN, ICAO and IMO provide an appropriate level of safety for these materials and, thus, PHMSA is adopting similar packagings in the HMR. Furthermore, aligning with international packaging standards facilitates the movement of these materials both domestically and internationally. Section 173.316 Section 173.316 provides the requirements for cryogenic liquids contained in cylinders.#

Passage 89Specifically, the HMR requires each cylinder containing cryogenic liquids be equipped with one or more pressure relief devices. PHMSA is revising Sec. 173.316, ``Cryogenic Liquids in Cylinders'' to include a requirement consistent with the UN Model Regulations that all pressure relief device inlets must under maximum filling conditions be situated in the vapor space of the closed cryogenic receptacle and the devices must be so arranged as to ensure that the escaping vapor is discharged unobstructed. This requirement will enhance safety by assisting in the proper function of the pressure release devices. Further, it will prevent unsafe conditions in transport if the liquid form of the gas were released through the pressure release device. For instance, if the gas released is a Division 2.1 (flammable) gas or a Division 2.3 (poisonous) gas, it will reduce the opportunity for the released liquid form of the gas to create an asphyxiant environment through the rapid displacement of the normal concentration of oxygen in the breathable atmosphere. Finally, it will reduce the potential of released cryogenic oxygen in liquid form to create an oxygen enriched atmosphere that may explosively combust. Section 173.318 Section 173.318 provides the requirements for cryogenic liquids contained in cargo tanks. Specifically, the HMR requires each cargo tank containing cryogenic liquids be equipped with one or more pressure relief devices. PHMSA is revising Sec. 173.318, ``Cryogenic Liquids in Cargo Tanks'' to include a requirement consistent with the UN Model Regulations that all pressure relief device inlets must under maximum filling conditions be situated in the vapor space of the closed cryogenic receptacle and the devices be so arranged as to ensure that the escaping vapor is discharged unobstructed. This requirement will enhance safety by assisting in the proper function of the pressure release devices. Further, it will prevent unsafe conditions in transport if the liquid form of the gas were released through the pressure release device. For instance, if the gas released is a Division 2.1 (flammable) gas or a Division 2.3 (poisonous) gas, it would reduce the opportunity for the released liquid form of the gas to create an asphyxiant#

Passage 90environment through the rapid displacement of the normal concentration of oxygen in the breathable atmosphere. Finally it will reduce the chance of released cryogenic oxygen in liquid form creating an oxygen enriched atmosphere that may explosively combust. Section 173.335 Section 173.335 is created to provide packaging requirements for new HMT entries ``Chemical under pressure n.o.s.'' Specifically, PHMSA is adopting transport requirements, filling limits, minimum service pressure, and periodic inspection requirements for cylinders utilized for shipments of chemical under pressure n.o.s. Cylinders used to ship chemical under pressure n.o.s. must be authorized UN or DOT cylinders for the propellant and otherwise conform to the applicable requirements of subpart G of part 173. 3M noted in their comments to the August 15, 2012 NPRM that while PHMSA created a section that included filling limits for cylinders containing chemical under pressure, we did not increase the water capacity for non- refillable UN pressure receptacles filled with chemical under pressure classed as flammable or toxic. In Sec. 173.301b non-refillable cylinders containing a flammable or a toxic gas are limited to 1.25 liters. The UN authorizes non-refillable cylinders with a capacity up to 50 liters when it contains a chemical under pressure. In this final rule we will revise Sec. Sec. 173.301b and 173.302a to increase the maximum allowable water capacity for non-refillable cylinders containing chemical under pressure to 50 liters (3050 in3). Section 173.340 Section 173.340 prescribes the packaging requirements for NA1693, tear gas devices. PHMSA is revising the packaging requirements in paragraphs (c) and (d) by authorizing the use of 4A, 4B, or 4N metal boxes, and 1B2, 1N2, or 1H2 drums.#

Passage 91Section 175.8 Section 175.8 provides exceptions from certain regulations for air carrier operator equipment and items of replacement. ICAO amended the Technical Instructions applicable to exceptions from certain regulations for air carrier operator equipment and items of replacement, and to better reflect items that may be sold as part of duty free services. PHMSA is revising paragraph (b)(2) of this section to add portable electronic devices containing lithium batteries to the list of items permitted aboard an aircraft for use or sale on that specific aircraft. Section 175.10 Section 175.10 specifies the conditions for which passengers, crew members, or an operator may carry hazardous materials aboard an aircraft. Consistent with revisions to the ICAO Technical Instructions, in this final rule, PHMSA is revising paragraph (a)(14), the conditions under which electrically powered heat-producing articles may be carried aboard an aircraft. The requirement that the heat-producing component, or the energy source, must be removed to prevent unintentional functioning during transport is being revised to permit the removal of another component, such as a fuse, to prevent unintentional functioning during transport. In addition the paragraph is being revised to specify procedures for protecting any removed battery from short circuit during transport. PHMSA is also adding paragraphs (a)(20), (a)(21), (a)(22), (a)(23), and (a)(24) to specify conditions under which permeation devices for calibrating air quality monitoring equipment, internal combustion or fuel cell engines, non-infectious specimens, insulated packagings containing refrigerated liquid nitrogen, and small compressed gas cartridges fitted into devices, respectively, may be carried aboard an aircraft. PHMSA received one comment from the FCHEA requesting that we amend Sec. 175.10(a)(19) to allow fuel cell cartridges containing flammable gas in Division 2.1 and fuel cells containing water reactive materials in Division 4.3 in checked passenger baggage. PHMSA did not propose changes to the provisions allowing for the checking of limited types of fuel cells in the NPRM, and consider this request to be outside the scope of this rulemaking. PRBA noted in their comments to the NPRM that the 2013-2014 ICAO Technical Instructions contain a provision that authorizes passengers to carry portable medical electronic devi#

Passage 92ces aboard passenger aircraft with lithium metal batteries containing up to 8 grams of lithium metal. While this amendment should be added to the HMR it was not included in the August 15, 2012 NPRM and the public has not been provided notice of any intent to add a new exception for lithium battery-containing portable medical devices in Sec. 175.10 or afforded the opportunity to provide us with written data, views, or arguments to aid our decision. As the FAA Modernization and Reform Act of 2012 requires harmonization in this instance, we will propose to adopt this exception in a future rulemaking.#

Passage 93Section 176.2 Section 176.2 provides definitions of terms specifically as they pertain to Part 176. In this final rule, PHMSA is adopting various revisions to the vessel stowage and segregation requirements specified in Part 176. As part of these changes certain terminology must be defined. The term ``Closed cargo transport unit for Class 1'' is defined by the IMDG Code as a freight container or transport vehicle that fully encloses the contents by permanent structures and can be secured to the ship's structure and are, except for the carriage of division 1.4 explosives, structurally serviceable (see Sec. 176.172). Portable magazines conforming to Sec. 176.137 are also considered closed cargo transport units for Class 1. Small compartments such as deck houses and mast lockers are included. Cargo transport units with fabric sides or tops are not closed cargo transport units. The floor of any closed cargo transport unit must either be constructed of wood, close-boarded or so arranged that goods are stowed on sparred gratings, wooden pallets or dunnage. The IMO adopted this new definition for ``closed cargo transport unit for Class 1'' to define the characteristics required for cargo transport units carrying explosives by vessel. A new definition for ``potential or possible sources of ignition'' was adopted by the IMO for incorporation in the next published IMDG Code. The term ``Potential or possible sources of ignition'' as defined in the IMDG Code ``means but is not limited to, open fires, machinery exhausts, galley uptakes, electrical outlets and electrical equipment including those on refrigerated or heated cargo transport units unless they are of certified safe type.'' The text ``means but is not limited to'' indicates that the list of potential or possible sources of ignition is not all inclusive; as it is impossible to identify in a definition all potential or possible sources of ignition that may exist on a variety of vessels with various engineering designs and stowage configurations. PHMSA is adopting a definition for ``Potential or possible sources of ignition'' that replaces ``of certified safe type'' with ``designed to operate in a hazardous environment.'' This change is due to some ambiguity as to what is considered a certified safe type of refrigerated or heated cargo transport unit. Adoption of this#

Passage 94definition will provide guidance to vessel stowage planners in determining safe stowage locations for cargo on board vessels. The term ``Protected from sources of heat'' as defined by the IMDG Code means ``that packages and cargo transport units must be stowed at least 2.4 m from heated ship structures, where the surface temperature is liable to exceed 131 [deg]F (55 [deg]C). Examples of heated structures are steam pipes, heating coils, top or side walls of heated fuel and cargo tanks, and bulkheads of machinery spaces. In addition, packages not loaded inside a cargo transport unit and stowed on deck must be shaded from direct sunlight. The surface of a cargo transport unit can heat rapidly when in direct sunlight in nearly windless conditions and the cargo may also become heated. Depending on the nature of the goods in the cargo transport unit and the planned voyage precautions must be taken to ensure that exposure to direct sunlight is reduced''. This definition was adopted by the IMO for inclusion in the next IMDG Code to provide a list of possible sources of heat a cargo transport unit might encounter during vessel transport. This definition also includes requirements for break bulk packages stowed on deck that are required to be protected from sources of heat by means of a stowage provision or a general stowage requirement found in Part 176. PHMSA received one comment from IVODGA concerning the proposed definition of ``protected from sources of heat.'' IVODGA suggested that at the end of the new definition for ``protected from sources of heat'' we include that ``* * * containers should not be stowed in the upper most tier position when this is required, which does not include tank units that have protective insulation shields'' since the new definition seems to bridge the older shade from radiant heat and other heat related factors onboard vessels. PHMSA does not see the need to be more specific and restrictive than the internationally accepted definition calls for and is maintaining the definition of protected from sources of heat as proposed in the NPRM. Therefore, in this final rule, PHMSA is adding definitions in this section for the terms, ``Closed cargo transport unit for Class 1,'' ``Potential or possible sources of ignition'' and ``Protected from sources of heat'' with additional text clarifying that a portable magazine conforming to Sec. 176.13 #

Passage 957 is also considered ``closed cargo transport unit for Class 1.'' Section 176.63 Section 176.63 prescribes supplementary requirements with respect to the stowage of specific hazardous materials in addition to those authorized in the HMT in Sec. 172.101. This section sets forth the basic physical requirements for the authorized vessel stowage locations. One commenter (SAAMI) noted that limited quantity shipments are assigned the least restrictive stowage category and are excepted from additional stowage provisions in 3.4.3 of the IMDG Code and requested that PHMSA do the same. PHMSA agrees and is revising paragraph (a) of this section to allocate stowage category A to hazardous materials offered as limited quantities, and to except these shipments from the other stowage provisions assigned in column 10B of the HMT for shipments of limited quantities. PHMSA is also revising paragraph (b) of this section by replacing the phrase ``shade from radiant heat'' with the phrase ``protected from sources of heat.'' This revision of terminology is necessary to incorporate other changes to the vessel stowage codes in Column 10 B of the HMT. PHMSA is also revising paragraph (e) of this section to remove references to magazine stowage type A and C, as the definition of ``closed cargo transport unit for Class 1'' was added to Sec. 176.2 references to magazine stowage type A and C are no longer needed in this section. Paragraph (e) also contains an exception for empty packages containing residue (excluding Class 2.3 empty packages containing residue and waste aerosols), including IBCs and large packages to be stowed on deck, or under deck if in a mechanically ventilated cargo space. This exception will apply regardless of the stowage provisions indicated in Sec. 172.101(k). PHMSA believes the reduced hazard present in empty packages containing residue combined with the mechanically ventilated cargo space warrants a relaxation of stowage requirements for shipments of empty packages (excluding Class 2.3 and waste aerosols) that otherwise would require on deck stowage. Section 176.76 Section 176.76 specifies the requirements for transport vehicles, freight containers, and portable tanks containing hazardous materials transported via vessel. In this final rule, PHMSA is adding a new paragraph (a)(11) requiring that banding or securing straps used to secure packages must not be ov#

Passage 96er tightened to cause damage or deformation of the packages or the securing points within the freight container or transport vehicle. PHMSA is adopting this change to harmonize cargo securement requirements in the HMR with recently adopted changes in the IMDG Code. This requirement is intended to prevent undue stress and potential damage to packages and tie down points during transport. PHMSA had originally proposed to replace the existing paragraph (a)(9) with this regulatory text, but received one comment from IVODGA noting that the provisions of (a)(9) concerning security devices is still necessary, and a request to maintain the current text of (a)(9) and simply insert a new paragraph with the proposed text. PHMSA agrees and is maintaining the current paragraph (a)(9). IVODGA also requested that the following text be included at the end of the newly proposed paragraph of our proposed text: ``* * * or transport vehicle. The Maximum Securing Load on internal container lashing, securing or anchor points shall not be exceeded.'' PHMSA believes that inserting IVODGA's proposal would be very difficult to enforce, as anchor points in containers are not marked with maximum securing loads. Additionally PHMSA believes that the language proposed in the NPRM accounts for IVODGA's concerns as deformation of the securing points is indicative of exceeding the securing points capabilities. PHMSA received an additional comment from IVODGA requesting we amend Sec. 176.76 to require transport equipment with refrigerated or heating units used for the transport of hazardous materials of Division 2.1, Class 3, or those capable of releasing flammable vapors during transport to be equipped with explosion proof electrical fittings. PHMSA has determined that such an amendment is beyond the scope of the proposals presented in the August 15, 2012 NPRM and therefore will not be addressed in this final rule. Section 176.83 Section 176.83 prescribes the general vessel segregation requirements. Paragraph (m) of this section specifies additional segregation requirements for certain groups of hazardous materials. Paragraph (m)(2) of this section prescribes segregation requirements for materials shipped under n.o.s. entries. Furthermore, paragraph (m)(3) discusses materials that fall outside the defining criteria for hazardous materials, but display chemical properties similar to#

Passage 97hazardous materials listed in segregation groups. In this final rule, PHMSA is revising paragraph (m)(2) to clarify that the offeror of hazardous materials is responsible for deciding if allocation of a segregation group is appropriate. We are also revising paragraph (m)(3) to clarify that the offer of hazardous materials for transportation or the person packing the cargo transport unit is responsible for identifying a relevant segregation group and applying the segregation requirements for that segregation group. These revisions will replace the current term ``shipper,'' which is not defined in Sec. 171.8, with the terms ``offeror'' and ``person who offers'' which are defined terms in Sec. 171.8. Section 176.84 Section 176.84 prescribes the meanings and requirements for numbered or alpha-numeric stowage provisions for vessel shipments listed in column 10B of the Sec. 172.101 Hazardous Materials Table. The provisions in Sec. 176.84 are broken down into general stowage provisions whose meanings are defined in the ``table of provisions'' in paragraph (b), and the stowage provisions applicable to vessel shipments of Class 1 explosives defined in the table to paragraph (c)(2). PHMSA is revising stowage provisions 25 and 128 and deleting stowage provisions 19, 48, and 50 from the table in paragraph (b). Stowage provision 25 is revised from ``Shade from radiant heat'' to read ``Protected from sources of heat.'' Stowage provision 128 is revised from ``Stow in accordance with the IMDG Code, Sub-section 7.1.10.3 (incorporated by reference; see Sec. 171.7 of this subchapter)'' to read ``Stow in accordance with the IMDG Code, Sub- section 7.6.2.7.2 (incorporated by reference; see Sec. 171.7 of this subchapter).'' Deleted stowage provision 19 previously read ``Protect from sparks and open flames.'' Deleted stowage provision 48 previously read ``Stow ``away from'' sources of heat''. Deleted stowage provision 50 previously read ``Stow ``away from'' sources of heat where temperatures in excess of 55 [deg]C (131 [deg]F) for a period of 24 hours or more will be encountered.'' The current stowage provision table in paragraph (b) contains three listings requiring shipments to be either shaded or stowed away from sources of heat. The addition of a standard definition for ``protected from sources of heat'' to the list of definitions in Sec. 176.2 has rendered stowage provisions#

Passage 9819, 48, and 50 redundant and all HMT listings previously assigned stowage provisions 19 or 48 have been assigned the revised stowage provision 25. Furthermore, no listings in the current HMR are assigned stowage provision 50; therefore, we are deleting it and all references to it. The change to stowage provision 128 will account for a citation change in the newest edition of the IMDG Code. In this final rule, PHMSA is revising explosive stowage provision 26E and deleting explosive stowage provisions 7E, 8E, and 20E from the table in paragraph (c)(2). Deleted explosive stowage provision 7E previously read ``Stowage category ``04'' for projectiles or cartridges for guns, cannons or mortars; Stowage category ``08'' for other types.'' Deleted explosive stowage provision 8E previously read ``When under deck, special stowage is required.'' Deleted explosive stowage provision 20E previously read ``Stowage category ``03'' for projectiles or cartridges for guns, cannons or mortars; Stowage category ``07'' for other types; magazines must be of steel construction that prevents leakage.'' Changes to explosive stowage provisions 7E, 8E, and 20E are necessary to account for revisions to the stowage category definitions proposed in Sec. 172.101(k). Additionally, as a result of the removal of stowage provisions 10 and 13 from Sec. 172.101(k), PHMSA is revising explosive stowage provision 26E in Sec. 176.84. Please see section 172.101 for explosive stowage codes associated with HMT entries previously assigned these explosive stowage provisions and a list of entries these provisions have been removed from. Section 176.116 Section 176.116 prescribes the general stowage conditions for Class 1 explosive materials. Paragraph (a) of this section prescribes explosive stowage requirements, which take into account heat and sources of ignition. Paragraph (f) of this section prescribes explosives stowage requirements for under deck storage. PHMSA is revising paragraph (a) to clarify the general stowage conditions for Class 1 materials on board vessels and deleting and reserving paragraph (f). PHMSA is revising paragraph (a)(1) to require explosive materials to be stowed in a cool part of the ship, to be kept as cool as practicable while on board, and to be stowed as far away as practicable from any potential source of heat or ignition. This change is due to the inclusion of a definitio#

Passage 99n for ``potential source of heat or ignition'' in Sec. 176.2. A new paragraph (a)(2) is added requiring Class 1 materials to be stowed away from the side of a ship's side at a distance at least equal to one eighth of the beam of the vessel or 2.4 m (8 feet), whichever is less. PHMSA received one comment (IVODGA) requesting an exception for materials within Class 1 of low or relatively low hazard within division 1.4 through 1.6 and the allowance to transport these in all positions available on-deck. In 7.1.4.4.3 of the IMDG goods of division 1.4 are excepted from the requirement to be stowed away from the side of a ship. Another comment by Horizon also noted that 1.4 cargos should be excluded from this requirement. PHMSA agrees to provide such an exception for goods of division 1.4, but sees no need to extend the exception beyond what is authorized by the international standard. This minimum distance for explosive shipment stowage from the ship's side is adopted to harmonize with a recent change in the IMDG Code and provides an increased level of safety by ensuring explosive shipments are not stowed adjacent to the ships internal structure. Paragraph (f) previously indicated general stowage provisions for HMT explosive entries stowed under deck and assigned stowage category 09 or 10. The removal of stowage category 09 and 10 make these provisions no longer applicable. Section 176.128 Section 176.128 defines the varying levels of containment for explosives identified as magazine stowage types ``A'', ``C,'' and ``Special Stowage.'' The IMO has determined that a distinction between closed cargo transport units and magazines is no longer necessary. PHMSA concurs with the IMO on this issue and is deleting Sec. 176.128 and reserving it for future use. With the addition of a definition for ``closed cargo transport unit for Class 1,'' and the requirement for all explosive shipments to be stored at a distance at least equal to one eighth of the beam of the vessel or 2.4 m (8 feet), whichever is less, specific requirements for type A, C, and special magazine stowage are now unnecessary. Note that portable magazines remain authorized by Sec. 176.137 and the definition of ``closed cargo transport unit for Class 1.'' Section 176.130 Section 176.130 prescribes requirements for magazine stowage type A. The IMO determined that a distinction between closed cargo transport uni#

Passage 100ts and magazines is no longer necessary. PHMSA concurs with the IMO on this issue and is deleting Sec. 176.130 and reserving it for future use. In general, a magazine is equivalent to a closed cargo transport unit with a#

Passage 101wooden floor. Properly packaged and transported packages in a closed cargo transport unit will adequately address safety concerns presented by commodities previously required to be transported in magazine stowage type A. Section 176.133 Section 176.133 prescribes requirements for magazine stowage type C. The IMO has determined that all explosive shipments must be stored at a distance at least equal to one eighth of the beam of the vessel or 2.4 m (8 feet), whichever is less, thus making the provisions for magazine stowage type C unnecessary. PHMSA concurs with the IMO on this issue and is deleting Sec. 176.133 and reserving it for future use. Section 176.134 Section 176.134 prescribes requirements for vehicles carrying Class 1 materials requiring magazine stowage. The removal of magazine stowage definitions and provisions make this section unnecessary. Therefore, PHMSA is deleting this section and reserving it for future use. Section 176.136 Section 176.136 prescribes requirements for special stowage of Class 1 materials. Changes to vessel stowage location codes in Sec. 172.101(k) and the assignment of vessel stowage codes requiring on deck stowage for entries previously authorized as special stowage make this section unnecessary. Therefore, PHMSA is deleting this section and reserving it for future use. Section 176.138 Section 176.138 prescribes general requirements for on deck stowage. Paragraph (b) provides general requirements for on deck stowage of explosives. In this final rule, PHMSA is revising this section to require explosives to not be stowed within 6 m (20 feet) of the newly defined term ``any potential sources of heat or ignition.'' This change is adopted to incorporate a newly defined term in Sec. 176.2. PHMSA received one comment from IVODGA requesting an editorial clarification to separate the proposed language into ``from any source of heat and any possible sources of ignition'' and is making the requested change. Section 176.144 Section 176.144 prescribes segregation requirements for Class 1 materials transported by vessel. Paragraph (d) allows materials requiring ordinary stowage (non-magazine stowage) to be stowed in the same magazine as materials requiring magazine stowage. PHMSA is revising paragraph (d) to state that if part of a shipment requires non-metallic lining of closed cargo transport units, Class 1 materials requiring ordinary#

Passage 102stowage (stowage not requiring non-metallic lining of closed cargo transport units) may be stowed in the same closed cargo transport unit provided there are no exposed parts of any ferrous metal or aluminum alloy, unless separated by a partition. The removal of sections and requirements for magazine stowage necessitates the change in this section. During the review of the NPRM PHMSA noted that Table 176.144(a) includes a reference to explosives requiring special stowage in Note: 1. This final rule removes the special stowage section in the HMR. Therefore, PHMSA is removing the reference to special stowage in Note 1 of Table 176.144(a). Section 176.146 Section 176.146 prescribes segregation requirements for Class 1 materials and non-hazardous goods transported by vessel. Paragraph (a) currently states that Class 1 material need not be segregated from non- hazardous materials except as provided in paragraphs (b) and (c). Paragraph (b) then goes on to state that certain cargo (mail, baggage, and personal effects) may not be stowed in the same compartment as, or in compartments immediately above or below, Class 1 (explosive) materials other than those in compatibility group S. Paragraph (c) states that where Class 1 (explosive) materials are stowed against an intervening bulkhead, any mail on the other side of the bulkhead must be stowed away from it. In this final rule, PHMSA is revising paragraphs (a) and (b) and deleting and reserving paragraph (c). Specifically, we are revising paragraph (a) to remove a reference to the removed paragraph (c). We are also revising paragraph (b) to read ``readily combustible materials may not be stowed in the same compartment or hold as Class 1 (explosive) materials other than those in compatibility group S.'' This change incorporates the adoption by IMO of the defined term ``readily combustible material'' in 176.2. In this final rule, PHMSA is removing and reserving paragraph (c) as the vast majority of mail is now sent by air and not vessel. A specific requirement for stowage of mail away from the intervening bulkhead between it and Class 1 materials is deemed unnecessary. Section 176.170 Section 176.170 prescribes requirements for shipments of Class 1 materials in freight containers by vessel. Paragraph (a) states that when Class 1 materials are stowed in a freight container, the freight container, for the purposes of this#

Passage 103subpart, may be regarded as a magazine but not as a separate compartment. Paragraph (c) states that freight containers used to transport Class 1 (explosive) materials for which magazine stowage type A is required must have a floor consisting of tightly fitted wooden boards, plywood or equivalent non-metallic material, and a non-metallic lining. PHMSA is amending paragraph (a) and deleting and reserving paragraph (c). Paragraph (a) is revised to state that when Class 1 materials are stowed in a freight container, the freight container, for the purposes of this subpart G of Part 176, may be regarded as a closed transport unit for Class 1 or a magazine but not a separate compartment. This change is being made to incorporate the definition of ``closed cargo transport unit for Class 1'' and the removal of magazine stowage A, C, and Special Stowage. Paragraph (c) references freight containers used to transport Class 1 (explosive) materials for which magazine stowage type A is required. The removal of a definition for and requirements for magazine stowage type A make this paragraph unnecessary. Section 176.200 Section 176.200 prescribes general stowage requirements for Class 2 materials transported by vessel. Paragraph (c) of this section prescribes the orientation and outer packaging requirements for cylinders transported by vessel. PHMSA is revising paragraph (c) to clarify that cylinders offered for transport by vessel in a vertical position must be stowed in either a block and cribbed or boxed-in with suitable sound lumber. PHMSA is also replacing the word movement with shifting in the requirement for the crib or box bracing to prevent any movement. These revisions are to harmonize with vessel transportation requirements incorporated in the IMDG Code and clarify that cylinders stored in a vertical position must be adequately blocked and braced using sound lumber. Section 176.210 Section 176.210 prescribes on deck stowage requirements for cylinders transported by vessel. This section currently requires cylinders of Class 2 materials being transported by vessel to#

Passage 104be protected from radiant heat, including the direct rays of the sun, by structural erections or awnings. In this final rule, PHMSA is revising this section by replacing ``protected from radiant heat, including the direct rays of the sun, by structural erections or awnings'' with the newly defined term ``protected from sources of heat.'' Section 176.230 Section 176.230 prescribes stowage requirements for Division 2.1 materials transported by vessel. Currently the HMR requires Division 2.1 materials transported in Specification 106A or 110A multi-unit car tanks must be stowed on deck only, and must be shaded from radiant heat. In this final rule, PHMSA is replacing the phrase ``shaded from radiant heat'' with the newly defined ``protected from sources of heat.'' Section 176.305 Section 176.305 prescribes stowage requirements for Class 3 materials transported by vessel. Paragraph (a) states that Class 3 flammable or combustible liquids must be kept as cool as reasonably practicable and be stowed away from all sources of heat and ignition. In this final rule, PHMSA is revising paragraph (a) to read ``a Class 3 (flammable) or combustible liquid must be kept as cool as reasonably practicable, protected from sources of heat, and away from potential sources of ignition.'' These changes incorporate the definitions of ``protected from sources of heat'' and ``potential or possible sources of ignition.'' Section 176.400 Section 176.400 prescribes stowage requirements for Division 1.5, Class 4 (flammable solids) and Class 5 materials transported by vessel. Paragraph (a) requires Class 4 (flammable solid) material and Division 5.2 (organic peroxide) materials to be kept as cool as reasonably practicable and be stowed away from all sources of heat and ignition. PHMSA is revising paragraph (a) to read ``Class 4 (flammable solid) material and Division 5.2 (organic peroxide) material must be kept as cool as reasonably practicable, protected from sources of heat, and away from potential sources of ignition.'' These changes incorporate the definitions of ``protected from sources of heat'' and ``potential or possible sources of ignition.'' Paragraph (b) of this section requires Division 5.2 (organic peroxide) material to be stowed away from living quarters or access to them. Division 5.2 (organic peroxide) substances not requiring temperature control should be protected from ra#

Passage 105diant heat, which includes direct rays of the sun, and stowed in a cool, well-ventilated area. PHMSA is amending paragraph (b) to replace ``should be protected from radiant heat, which includes direct rays of the sun, and stowed in a cool, well-ventilated area'' with ``must be protected from sources of heat, including radiant heat and strong sunlight, and must be stowed in a cool, well-ventilated area.'' These changes are being made to incorporate the definitions of ``protected from sources of heat'' harmonize with the IMDG Code, and to emphasize that protecting shipments of organic peroxides not requiring temperature control from sources of heat is a requirement and not optional. Section 176.600 Section 176.600 prescribes detailed requirements for Division 2.3 (Poisonous Gas) and Division 6.1 (Poisonous) materials transported by vessel. Paragraph (d) of this section requires each package of Division 2.3 (poisonous gas) material or Division 6.1 (poison) material that also bears a FLAMMABLE LIQUID or FLAMMABLE GAS label must be stowed in a mechanically ventilated space, kept as cool as reasonably practicable, and be stowed away from all sources of heat and ignition. PHMSA is revising paragraph (d) to replace ``stowed away from all sources of heat and ignition'' with ``protected from sources of heat and stowed away from potential sources of ignition.'' These changes incorporate the definitions of ``protected from sources of heat'' and ``potential or possible sources of ignition.'' PHMSA received one comment from Horizon requesting that the mechanically ventilated space and protected from sources of ignition stowage requirements be applied only to 2.3 materials and 6.1 materials that are toxic by inhalation. The proposal in the NPRM was done solely to change the terminology based on the adoption of new international definitions for ``protected from sources of heat'' and ``potential or possible sources of ignition.'' No changes to the actual commodities that require such segregation were proposed or will be implemented in this rulemaking. Section 176.907 Section 176.907 is created to incorporate cargo transport requirements for shipments of UN2211, Polymeric Beads, Expandable evolving flammable vapor and UN3314, Plastics Molding Compound in dough, sheet or extruded rope form, evolving flammable vapor. Several cases of damage to cargo transport units were present#

Passage 106ed to the IMO with the root cause being identified as the release of flammable pentane gas during transportation of shipments UN2211 and UN3314. To address the concerns presented by off gassing of flammable vapors which lead to a rise in pressure that may damage cargo transport units, the IMO instituted measures to ensure an adequate exchange of air within the cargo transport unit is provided. PHMSA is harmonizing with the recent changes to the IMDG and addressing safety concerns presented by the off gassing of flammable vapors from shipments of UN2211 and UN3314 by requiring that when UN2211 or UN3314 are transported by vessel, the cargo transport unit must provide an adequate exchange of air. This adequate exchange of air may be accomplished by using a ventilated container, an open-top container, or a container in one door off operation. As an alternative to these methods of air exchange, shippers may transport these cargos under temperature control in refrigerated cargo transport units. Exceptions to the cargo transport unit providing an adequate exchange of air requirement are provided for shipments packed in hermetically sealed packagings or IBCs which conform to the packing group II performance level for liquid dangerous goods in which the total pressure in the package (i.e., the vapor pressure of the liquid plus the partial pressure of air or other inert gasses less 100 kPa (15 psia)) with a filling temperature of 55[deg] C (131[deg] F) does not exceed two-thirds of the marked test pressure. Cargo transport units containing shipments of UN2211 or UN3314 must be marked with a warning mark including the words ``CAUTION--MAY CONTAIN FLAMMABLE VAPOR'' or ``CAUTION--MAY CONTAIN FLAMMABLE VAPOUR'' with lettering not less than 25 mm high. This mark must be affixed at each access point in a location where it will be easily seen by persons prior to opening or entering the cargo transport unit and must remain on the cargo transport unit until the cargo transport unit has been completely ventilated to remove any hazardous concentration of vapor or gas, the immediate vicinity of the cargo transport unit is clear of any source of ignition, and the goods have been unloaded. PHMSA received one comment from IVODGA requesting a further exception#

Passage 107for shipments that do not meet the ventilation requirements or the packaging requirements of the proposed section. IVODGA asked PHMSA to allow freight containers or transport vehicles containing these shipments not meeting the conditions of the proposed 176.907 to be allowed to be transported on vessel using on-deck stowage and stowed away from sources of potential ignition. PHMSA does not see a need to allow for less protective stowage provisions than the IMDG Code provides for these commodities. While the suggested stowage location and provisions proposed by IVODGA do represent a certain degree of caution; the adopted and harmonized requirements provide additional protection from the potential offgassing of pentane from these commodities; and thus PHMSA is adopting the changes as proposed in the NPRM.#

Passage 108Section 178.71 Section 178.71 prescribes specifications for UN pressure receptacles. In this final rule PHMSA is incorporating by reference ISO 13340:2001(E) Transportable gas cylinders--Cylinder valves for non- refillable cylinders--Specification and prototype testing, First edition, 2004-04-01. Non-refillable pressure receptacles must comply with cylinder valve requirements from ISO 13340. ISO 13340 was incorrectly proposed for addition to Sec. 178.274(i) in the NPRM. PHMSA is correcting this proposal by incorporating this standard into the correct sections and requiring non-refillable pressure receptacles to comply with cylinder valve requirements in ISO 13340. Section 178.512 Section 178.512 prescribes the standards, packaging identification codes, and construction requirements for steel and aluminum boxes (4A and 4B boxes). To incorporate the authorization for use of 4N boxes (metal other than steel or aluminum), the title of the section is revised to ``Standards for steel, aluminum or other metal boxes.'' Section 178.512 is also revised to include the authorized packaging identification code, 4N, for other metal boxes, and expand the construction requirements of the section to include these packagings. Subsequent changes are made throughout the section to address the inclusion of 4N other metal boxes. Section 178.603 Section 178.603 prescribes the drop test requirements for non-bulk packagings in the HMR. Section 178.603 provides that a drop test must be conducted for the qualification of all packaging design types, and further provides that exceptions for the number of steel and aluminum packaging samples used for conducting the drop test are subject to the approval of the Associate Administrator. Currently, paragraph (a) of this section contains a table that outlines specific types of packagings and the corresponding number of samples that should be tested and the drop orientation of those samples. In this final rule, PHMSA is revising this table by including ``other metal boxes'' to the listed packagings. To incorporate the authorization for use of 4N boxes (metal other than steel or aluminum), Sec. 178.603 is revised to require the drop test for other metal (4N) boxes, and authorize exceptions, subject to the approval of the Associate Administrator, for the number of samples used for conducting the drop test of these packagings. Section 178.705 Sec#

Passage 109tion 178.705 prescribes standards for metal IBCs. Paragraph (a)(3) indicates that IBC specifications 31A, 31B, and 31N are authorized for both liquids and solids. PHMSA is revising this sentence editorially by removing the authorization to package solids in specification 31 IBCs as the specification is only assigned to liquid substances. This editorial change is consistent with the Sec. 172.102 IBC Code Table revisions in paragraph (c)(4) and other IBC standards (e.g., Sec. 178.707(a)(5)) prescribed in subpart N of part 178. Section 178.910 Section 178.910 prescribes the marking requirements for specification Large Packaging design types. Paragraph (a)(1) of this describes the size specifications and format of the marking requirements. In this final rule, PHMSA is clarifying these requirements by indicating that for large packages manufactured after January 1, 2014 the minimum marking size must be 12 mm in height. Furthermore, paragraph (b) of this section is now reserved. However, we are adding a paragraph (b) indicating that for all Large Packages manufactured, repaired or remanufactured after January 1, 2015 the large package must be marked with the symbol applicable to a Large Package designed for stacking or not designed for stacking, as appropriate. This language will be accompanied by an example of such a mark. Section 178.980 Section 178.980 prescribes the procedures for conducting the stacking test for qualification of all Large Packaging design types. Paragraph (e)(1) describes the criterion a metal or rigid plastic Large Packaging must meet to be considered as successfully passing the stacking test. While paragraph (e) addresses metal or rigid plastic Large Packagings, the criterion that a fiberboard or wooden Large Packaging must meet to be considered as successfully passing the stacking test is omitted. Therefore, in this final rule, we are correcting this omission, by adding a new paragraph (e)(2) that addresses the criterion for fiberboard or wooden Large Packagings to pass the test and redesignating the following paragraphs accordingly. Subpart R Currently, the HMR do not contain specifications for FBCs. In this final rule, PHMSA is adopting the specification, construction, and testing requirements for FBCs. On February 2, 2010, PHMSA published a final rule in the Federal Register under Docket Number PHMSA-2006- 25736 (HM-231) [75 FR 4699] en#

Passage 110titled ``Hazardous Materials; Miscellaneous Packaging Amendments.'' In HM-231, specification and testing requirements were adopted for Large Packagings. The specification and testing requirements for FBCs are modeled on the regulatory structure adopted for Large Packagings in HM-231. Thus, new subpart R of part 178 entitled ``Subpart R--Flexible Bulk Container Standards'' is added. Section 178.1000 PHMSA is adopting new Sec. 178.1000 entitled ``Purpose and scope.'' This section prescribes the packaging designs to which Subpart R applies and the location in the HMR where terms used in the subpart are defined. Section 178.1005 In this final rule, PHMSA is adding new Sec. 178.1005 entitled ``Flexible Bulk Container Identification Code.'' This section provides the identification code (i.e. BK3) assigned to FBCs. Section 178.1010 In this final rule, PHMSA is adding new Sec. 178.1010 entitled ``Marking of Flexible Bulk Containers.'' This section prescribes the markings the manufacturer of an FBC must mark on#

Passage 111a package to indicate the FBC meets the specification. The marking requirements for FBCs are based on the current marking requirements for IBCs prescribed in Sec. 178.703. Section 178.1015 In this final rule, PHMSA is adding new Sec. 178.1015 entitled ``General Flexible Bulk Container Standards.'' This section prescribes the general packaging integrity requirements an FBC design must meet. Section 178.1020 In this final rule, PHMSA is adding new Sec. 178.1020 entitled ``Period of use for transportation of hazardous materials in Flexible Bulk Containers.'' This section prescribes the length of time an FBC may be used to package hazardous materials. Specifically, this section states that an FBC used to package hazardous materials may remain in service not to exceed two years from the date of manufacture. Subpart S Currently, the HMR do not prescribe testing criteria for FBCs. PHMSA is adopting testing protocol for FBCs. On February 2, 2010, PHMSA published a final rule in the Federal Register under Docket Number PHMSA-2006- 25736 (HM-231) [75 FR 4699] entitled ``Hazardous Materials; Miscellaneous Packaging Amendments.'' In HM-231, specification and testing requirements were adopted for Large Packagings. The test protocol proposed in this final rule for FBCs are modeled on the regulatory structure adopted for Large Packagings in HM-231. Thus, new subpart S of part 178 entitled ``Subpart S--Testing of Flexible Bulk Container Standards'' is added. Section 178.1030 In this final rule, PHMSA is adopting Sec. 178.1030 entitled ``Purpose and scope.'' This section prescribes the applicability to which the Subpart S tests apply. Section 178.1035 In this final rule, PHMSA is adopting Sec. 178.1035 entitled ``General requirements.'' This section prescribes the general packaging requirements for FBCs and addresses the following topics: FBC-related definitions; defining responsibility for compliance with specification requirements; design qualification testing; periodic design testing; proof of compliance; and record retention. Section 178.1040 In this final rule, PHMSA is adopting test preparation requirements for FBCs in new Sec. 178.1040 entitled ``Preparation of Flexible Bulk Containers for Testing.'' This section specifies the general test preparation requirements applicable to all tests an FBC is required to successfully pass. Section 178.1045 In this final rule, PHM#

Passage 112SA is adopting requirements for drop tests conducted on FBCs. A drop test is used to measure a packaging's ability to withstand falls from specific heights and is used to determine if a package is suitable to transport hazardous materials. Thus, PHMSA is adding a new Sec. 178.1045 entitled ``Drop test.'' This section prescribes the preparation of test samples, test methods authorized, drop heights, and criteria for passing the drop test. Section 178.1050 In this final rule, PHMSA is adopting requirements for top lift tests conducted on FBCs. A top lift test measures a package's ability to be moved mechanically by lifting the package by its top end and is used to determine if a package is suitable to transport hazardous materials. Thus, PHMSA is adding new Sec. 178.1050 entitled ``Top lift test.'' This section prescribes requirements for the preparation of test samples, test methods authorized, and criteria for passing the top lift test. Section 178.1055 In this final rule, PHMSA is adopting requirements for stacking tests conducted on FBCs. A stacking test is used to measure a packaging's ability to withstand other packages placed on top of it and is used to determine if a package is suitable to transport hazardous materials. Thus, PHMSA is adding new Sec. 178.1055 entitled ``Stacking test.'' This section prescribes requirements for the preparation of test samples, test methods authorized, and criteria for passing the stacking test. Section 178.1060 In this final rule, PHMSA is adopting requirements for topple tests conducted on FBCs. A topple test is used to measure a packaging's ability to withstand tipping of the package and is used to determine if a package is suitable to transport hazardous materials. Thus, PHMSA is adding new Sec. 178.1060 entitled ``Topple test.'' This section prescribes the preparation of test samples, test methods authorized, topple height, and criteria for passing the topple test. Section 178.1065 In this final rule, PHMSA adopting requirements for righting tests conducted on FBCs. A righting test is used to measure a packaging's ability to withstand lifting from a lying position at a given rate of speed and is used to determine if a package is suitable to transport hazardous materials. Thus, PHMSA is adding new Sec. 178.1065 entitled ``Righting test.'' This section prescribes the preparation of test samples, test methods authorize#

Passage 113d, and criteria for passing the righting test. Section 178.1070 In this final rule, PHMSA is adopting requirements for tear tests conducted on FBCs. A tear test is used to measure a packaging's ability to withstand shearing and tearing that may be encountered during transportation, such as loading and unloading, and is used to determine if a package is suitable to transport hazardous materials. Thus, PHMSA is adding new Sec. 178.1070 entitled ``Tear test.'' This section prescribes the preparation of test samples, test methods authorized, and criteria for passing the tear test. A. Statutory/Legal Authority for This Rulemaking This final rule is published under the following statutory authorities: 1. 49 U.S.C. 5103(b) authorizes the Secretary of Transportation to prescribe regulations for the safe transportation, including security, of hazardous materials in intrastate, interstate, and foreign commerce. This final rule amends regulations to maintain alignment with international standards by incorporating various amendments, including changes to proper shipping names, hazard classes, packing groups, special provisions, packaging authorizations, air transport quantity limitations and vessel stowage requirements. To this end, this final rule amends the HMR to more fully align with the biennial updates of the UN Model Regulations, the IMDG Code, and the ICAO Technical Instructions. Harmonization serves to facilitate international commerce; at the same time, harmonization promotes the safety of people, property, and the environment by reducing the potential for confusion and misunderstanding that could result if shippers and transporters were required to comply with two or more conflicting sets of regulatory requirements. While the intent of this rulemaking is to align the HMR with international standards, we review and consider each amendment#

Passage 114on its own merit based on its overall impact on transportation safety and the economic implications associated with its adoption into the HMR. Our goal is to harmonize without sacrificing the current HMR level of safety and without imposing undue burdens on the regulated community. Thus, as explained in the corresponding sections above, we are not harmonizing with certain specific provisions of the UN Model Regulations, the IMDG Code, and the ICAO Technical Instructions. Moreover, we are maintaining a number of current exceptions for domestic transportation that should minimize the compliance burden on the regulated community. Additionally, the following external agencies were consulted in the development of this rule: U.S. Coast Guard U.S. Department of Agriculture (USDA) U.S. Department of Energy U.S. Department of Interior U.S. Department of Justice 2. 49 U.S.C. 5120(b) authorizes the Secretary of Transportation to ensure that, to the extent practicable, regulations governing the transportation of hazardous materials in commerce are consistent with standards adopted by international authorities. This final rule is amending the HMR to maintain alignment with international standards by incorporating various amendments to facilitate the transport of hazardous material in international commerce. To this end, as discussed in detail above, PHMSA is incorporating changes into the HMR based on the 17th Revised Edition of the UN Model Regulations, Amendment 36-12 to the IMDG Code, and the 2013-2014 ICAO Technical Instructions, which become effective January 1, 2013. The large volume of hazardous materials transported in international commerce warrants the harmonization of domestic and international requirements to the greatest extent possible. B. Executive Orders 12866 and 13563 and DOT Regulatory Policies and Procedures#

Passage 115This final rule is not considered a significant regulatory action under section 3(f) of Executive Order 12866 (``Regulatory Planning and Review'') and, therefore, was not reviewed by the Office of Management and Budget. This final rule is not considered a significant rule under the Regulatory Policies and Procedures of the Department of Transportation (44 FR 11034). Additionally, E.O. 13563 (``Improving Regulation and Regulatory Review'') supplements and reaffirms E.O. 12866, stressing that, to the extent permitted by law, an agency rulemaking action must be based on benefits that justify its costs, impose the least burden, consider cumulative burdens, maximize benefits, use performance objectives, and assess available alternatives. Economic Benefits to Harmonization. In this final rule, PHMSA is incorporating by reference the most recent versions of various international hazardous materials standards, including the 2013-2014 ICAO Technical Instructions, Amendment 36-12 to the IMDG Code, and the 17th Revised Edition of the UN Model Regulations. Additionally, PHMSA is updating its incorporation by reference of the Canadian Transportation of Dangerous Goods Regulations to include Amendment 8 (SOR/2011-239) October 27, 2011; Amendment 9 (SOR/2011-60) March 3, 2011; and Amendment 10 (SOR/2011-210) September 30, 2011. Lastly, PHMSA is adopting updated International Standards Organization (ISO) standards. The primary benefit of harmonizing the U.S. Hazardous Materials Regulations (HMR) with the international hazardous materials standards noted previously is that it will reduce the regulatory compliance costs faced by U.S. companies. Without harmonization, these companies will be forced to comply with dual systems of regulations, and as a result will incur higher compliance costs than would be encountered under a single regulatory scheme. The benefit of harmonization attributable to this rulemaking is the difference in regulatory compliance costs faced by companies operating under a single regulatory framework instead of multiple regulatory frameworks. If the U.S. regulations were not harmonized with the international standards mentioned above, we estimate that it would cost U.S. companies an additional $62 million per year to comply with both the HMR and the international standards. Harmonizing the HMR with the international standards, however, will avert these $6#

Passage 1162 million in additional costs, and these averted costs are therefore considered the primary benefit attributable to this rulemaking. The $62 million estimate is based on the assumption that in the absence of harmonization both exporters and importers would have to adhere to two separate hazard communication systems, one used for the transportation of materials within the United States and one used for the transportation of materials outside the United States. Exporters would directly incur four different cost elements and would have to pay for (1) dual labels and safety data sheets, (2) additional training, (3) additional management activities, and (4) additional packaging costs. Foreign producers who ship products to the United States would also incur these four cost elements, and we assume that the foreign producers would pass half of those incurred costs on to U.S. consumers in the form of higher prices. To develop the $62 million estimate, we estimated the average hazard communication cost per dollar of hazardous materials produced in the United States and then multiplied that cost figure by an estimate of the value of U.S. imports and exports of hazardous materials. In other words, in the absence of harmonization, we assume that companies involved with U.S. foreign trade would have to pay for additional hazard communication requirements for international movements; these companies would have to comply with the HMR communication requirements during domestic legs of the movement and with international standards during legs of the movement outside of the United States. A proxy for hazard communication costs was obtained from a recent Occupational Safety and Health Administration study looking at the costs for industry to comply with the revised Hazard Communication Standard.\2\ The study estimated the total compliance cost to be $201 million per year based on four cost elements: revisions to labels and safety data sheets, additional training, additional management activities, and printing of color packaging. The first three cost elements are relevant for our purposes and totaled $177 million. --------------------------------------------------------------------------- \2\ http://www.osha.gov/dsg/hazcom/hazcom-faq.html. ---------------------------------------------------------------------------#

Passage 117To put the $177 million hazard communication cost estimate on a per unit basis, we divided the $177 million by an estimate of the total value of hazardous materials produced in the United States in 2010. The total value of hazardous materials produced in the United States was estimated to be $151 billion. To derive this $151 billion estimate, we summed relevant product values reported in the Census Bureau's Annual Survey of Manufactures: Value of Product Shipments, and then multiplied the result by 12.4 percent--the percentage of shipment values reported to be hazardous products (this parameter was obtained from Table 10 in the Census Bureau's 2007 Commodity Flow Survey for Hazardous Materials). The resulting hazard communication cost per dollar of hazardous materials output was estimated to be $0.001 (or $177 million / $151 billion). We were not able to identify any comprehensive source on hazardous materials imports and exports and therefore developed estimates for these figures using quarterly trade data from the Bureau of Economic Analysis \3\ and data on the transportation of hazardous materials from the Census Bureau's 2007 Commodity Flow Survey. The quarterly trade data on the value of imports and exports--for fuels and lubricants, chemicals, and medicinal/dental/pharmaceutical products--were summed to produce a single annual trade value for 2010 for industries that produce hazardous materials. Before aggregating the import and export values, we reduced the import values by half to take into account the assumption mentioned previously that foreign producers would be able to pass on only half of the additional hazard communication costs to U.S. consumers. Total annual trade for industries that produce hazardous materials was computed to be just over $498 billion in 2010. --------------------------------------------------------------------------- \3\ http://www.bea.gov/international/detailed_trade_data.htm. ---------------------------------------------------------------------------#

Passage 118We then multiplied this $498 billion trade figure by 12.4 percent, the percentage of output in these industries reported to be hazardous products; this parameter was obtained from Table 10 in the 2007 Commodity Flow Survey for Hazardous Materials. The resulting estimate indicates that approximately $62 billion worth of hazardous materials were involved in international trade with the United States in 2010. Multiplying the hazard communication cost per dollar of hazardous material output ($0.001) by the value of hazardous materials involved in international trade ($62 billion) results in a hazard communication cost estimate of approximately $62 million per year that companies would have to pay to comply with different regulatory requirements applicable to international movements. Harmonizing the HMR with international standards will make these $62 million in hazard communications costs unnecessary, and therefore is the main benefit attributable to this rulemaking. Cost of Harmonization. The potential costs of this rulemaking include private sector compliance costs and any costs that can be attributed to a possible reduction in public safety as a result of harmonizing the HMR with international standards. We expect that both of these costs will be negligible. Estimates suggest that private sector compliance costs associated with complying with the different amendments in the final rule will be minimal. In terms of costs due to any reduction in public safety as a result of harmonizing the HMR with international standards, PHMSA believes that none of the proposed revisions to the HMR have material safety impacts. We therefore assume that the gross social costs of this NPRM are effectively zero. Net Benefit. Based on the discussions of benefits and costs provided above the estimated net benefit associated with the international harmonization final rule (2137-AE87) is nearly $62 million.#

Passage 119This final rule has been analyzed in accordance with the principles and criteria contained in Executive Order 13132 (``Federalism''). This final rule preempts State, local, and Indian tribe requirements but does not impose any regulation that has substantial direct effects on the States, the relationship between the national government and the States, or the distribution of power and responsibilities among the various levels of government. Therefore, the consultation and funding requirements of Executive Order 13132 do not apply. The Federal hazardous material transportation law, 49 U.S.C. 5101- 5128, contains an express preemption provision (49 U.S.C. 5125(b)) that preempts State, local, and Indian tribe requirements on certain covered subjects, as follows: (1) The designation, description, and classification of hazardous material; (2) The packing, repacking, handling, labeling, marking, and placarding of hazardous material; (3) The preparation, execution, and use of shipping documents related to hazardous material and requirements related to the number, contents, and placement of those documents; (4) The written notification, recording, and reporting of the unintentional release in transportation of hazardous material; and (5) The design, manufacture, fabrication, inspection, marking, maintenance, recondition, repair, or testing of a packaging or container represented, marked, certified, or sold as qualified for use in transporting hazardous material in commerce. This final rule addresses covered subject items (1), (2), (3), (4) and (5) above and preempts State, local, and Indian tribe requirements not meeting the ``substantively the same'' standard. This final rule is necessary to incorporate changes adopted in international standards, effective January 1, 2013. If this final rule was not adopted, U.S. companies, including numerous small entities competing in foreign markets, will be at an economic disadvantage. These companies will be forced to comply with a dual system of regulations. The changes in this final rule are intended to avoid this result. Federal hazardous materials transportation law provides at 49 U.S.C. 5125(b)(2) that, if DOT issues a regulation concerning any of the covered subjects, DOT must determine and publish in the Federal Register the effective date of Federal preemption. The effective date may not be earlier than the 90th day fol#

Passage 120lowing the date of issuance of the final rule and not later than two years after the date of issuance. The effective date of Federal preemption is 90 days from publication of this final rule. This final rule was analyzed in accordance with the principles and criteria contained in Executive Order 13175 (``Consultation and Coordination with Indian Tribal Governments''). Because this final rule does not have tribal implications and, does not impose substantial direct compliance costs the funding and consultation requirements of Executive Order 13175 do not apply. E. Regulatory Flexibility Act, Executive Order 13272, and DOT Procedures and Policies The Regulatory Flexibility Act (5 U.S.C. 601 et seq.) requires an agency to review regulations to assess their impact on small entities, unless the agency determines that a rule is not expected to have a significant impact on a substantial number of small entities. This final rule facilitates the transportation of hazardous materials in international commerce by providing consistency with international standards. This final rule applies to offerors and carriers of hazardous materials, some of whom are small entities, such as chemical manufacturers, users and suppliers, packaging manufacturers, distributors, and training companies. As discussed above, under Executive Order 12866, the majority of amendments in this final rule should result in cost savings and ease the regulatory compliance burden for shippers engaged in domestic and international commerce, including trans-border shipments within North America. Many companies will realize economic benefits as a result of these amendments. Additionally, the changes effected by this final rule will relieve U.S. companies, including small entities competing in foreign markets, from the burden of complying with a dual system of regulations. Therefore, we certify that these amendments will not have a significant economic impact on a substantial number of small entities. This final rule has been developed in accordance with Executive Order 13272 (``Proper Consideration of Small Entities in Agency Rulemaking'') and DOT's procedures and policies to promote compliance with the Regulatory Flexibility Act to ensure that potential impacts of draft rules on small entities are properly considered.#

Passage 121PHMSA currently has approved information collections under Office of Management and Budget (OMB) Control Number 2137-0018, ``Inspection and Testing of Portable Tanks and Intermediate Bulk Containers,'' and OMB Control Number 2137-0572, ``Testing Requirements for Non-Bulk Packages.'' This final rule may result in an increase in the annual burden and costs of both OMB Control Numbers due to the proposed amendments to allow the use of metals other than steel or aluminum for drums and boxes as well as the proposed new Flexible Bulk Container package authorization, which will require package manufacturers to document and maintain package test results, should they elect to manufacture Flexible Bulk Containers or of metals other than steel or aluminum for drums and boxes. Under the Paperwork Reduction Act of 1995, no person is required to respond to an information collection unless it has been approved by OMB and displays a valid OMB control number. Section 1320.8(d), title 5, Code of Federal Regulations requires that PHMSA provide interested members of the public and affected agencies an opportunity to comment on information and recordkeeping requests. This notice identifies revised information collection requests that PHMSA will submit to OMB for approval based on the requirements in this final rule. PHMSA has developed burden estimates to reflect changes in this final rule, and estimates the information collection and recordkeeping burden in this rule to be as follows: OMB Control No.: 2137-0018. Annual Increase in Number of Respondents: 25. Annual Increase in Annual Number of Responses: 50. Annual Increase in Annual Burden Hours: 200. Annual Increase in Annual Burden Costs: $5,000. 50 estimated responses at $25 per hour and four hours per response. OMB Control No.: 2137-0572. Annual Increase in Number of Respondents: 100. Annual Increase in Annual Number of Responses: 300. Annual Increase in Annual Burden Hours: 600. Annual Increase in Annual Burden Costs: $15,000. 300 Annual responses at $25 per hour and 2 hours per response. PHMSA will submit the revised information collection and recordkeeping requirements to OMB for approval.#

Passage 122A regulation identifier number (RIN) is assigned to each regulatory action listed in the Unified Agenda of Federal Regulations. The Regulatory Information Service Center generally publishes the Unified Agenda in April and October of each year. The RIN contained in the heading of this document can be used to cross-reference this action with the Unified Agenda. This final rule does not impose unfunded mandates under the Unfunded Mandates Reform Act of 1995. It does not result in costs of $141.3 million or more, adjusted for inflation, to either State, local, or tribal governments, in the aggregate, or to the private sector in any one year, and is the least burdensome alternative that achieves the objective of the rule.#

Passage 123The National Environmental Policy Act, 42 U.S.C. 4321-4375, requires that federal agencies consider the consequences of major Federal actions and prepare a detailed statement on actions significantly affecting the quality of the human environment. The Council on Environmental Quality (CEQ) regulations require federal agencies to conduct an environmental review considering: (1) The need for the action; (2) alternatives to the action; (3) probable environmental impacts of the action and alternatives; and (4) the agencies and persons consulted during the consideration process (40 CFR 1508.9(b)). Description of Action Docket No. PHMSA-2012-0027 (HM-215L), Final Rule. The transportation of hazardous materials in commerce is subject to the HMR, issued under authority of Federal hazardous materials transportation law, codified at 49 U.S.C. 5001 et seq. To facilitate the safe and efficient transportation of hazardous materials in international commerce, the HMR provides that both domestic and international shipments of hazardous materials may be offered for transportation and transported under provisions of the international regulations. Purpose and Need In this final rule, PHMSA is amending the HMR to maintain alignment with international standards by incorporating various amendments, including changes to proper shipping names, hazard classes, packing groups, special provisions, packaging authorizations, air transport quantity limitations, and vessel stowage requirements. These revisions are necessary to harmonize and align the HMR with recent amendments adopted in the UN Model Regulations, IMDG Code, and the ICAO Technical Instructions. The amendments in this final rule are intended to facilitate the safe and efficient transportation of hazardous materials in international commerce, provide clarity designed to encourage and increase regulatory compliance, and improve the efficacy of emergency response in the event a hazardous materials incident occurs. Alternatives In developing this rule, we considered three alternatives: (1) Do nothing. (2) Adopt the international standards in their entirety. (3) Adopt most of the international standards, with certain modifications based on safety or economic considerations. Alternative 1 Because our goal is to facilitate uniformity, compliance, commerce and safety in the transportation of hazardous materials, we rejected this a#

Passage 124lternative. Alternative 2 By adopting the international standards in their entirety, PHMSA could potentially adopt provisions that, in our view, do not provide an adequate level of transportation safety and environmental safety and protection. Further, because we provide for domestic exceptions and extended compliance periods to minimize the potential economic impact of any revisions on the regulated community, this alternative was also rejected. Alternative 3 Consistency between U.S. and international regulations helps to assure the safety of international hazardous#

Passage 125materials transportation and the environment through better understanding of the regulations, an increased level of compliance, the smooth flow of hazardous materials from their points of origin to their points of destination, and effective emergency response in the event of a hazardous materials incident. Under Alternative 3, we would harmonize the HMR with international standards to the extent consistent with U.S. safety, economic, and environmental protection goals. Alternative 3 is the only alternative that addresses, in all respects, the purpose of this regulatory action, which is to facilitate the safe and efficient transportation of hazardous materials in international commerce and the protection of the environment. These actions will provide the greatest possible harmonization with international requirements without posing an undue increased cost burden on the regulated community. For these reasons, alternative 3 is our selected alternative. Analysis of Environmental Impacts Hazardous materials are transported by aircraft, vessel, rail, and highway. The potential for environmental damage or contamination exists when packages of hazardous materials are involved in accidents or en route incidents resulting from cargo shifts, valve failures, package failures, or loading, unloading, or handling problems. The ecosystems that could be affected by a release include air, water, soil, and ecological resources (for example, wildlife habitats). The adverse environmental impacts associated with releases of most hazardous materials are short-term impacts that can be greatly reduced or eliminated through prompt clean-up of the accident scene. Most hazardous materials are not transported in quantities sufficient to cause significant, long-term environmental damage if they are released. The hazardous material regulatory system is a risk-management system that is prevention-oriented and focused on identifying hazards and reducing the probability and quantity of a hazardous material release. Amending the HMR to maintain alignment with international standards enhances the safe transportation of hazardous materials in domestic and international commerce. When considering the adoption of international standards under the HMR, we review and consider each amendment on its own merit and assess the likely impact on transportation safety and the environment. It is our conclus#

Passage 126ion that the provisions in this final rule will not have either a substantial positive or adverse effect on the environment. In this final rule PHMSA is adopting the following noteworthy amendments to the HMR: Chemicals under pressure. Manufacturers in the United Kingdom, the United States, Australia, Canada, and other countries are supplying pressurized products contained and transported in gas cylinders. The products are liquids or solids such as adhesives, coatings and cleaners combined with a gas or gas mixtures in pressure receptacles under sufficient pressure to expel the contents. These mixtures are typically expelled from the pressurized cylinders as foams, streams or thick sprays. Currently the HMR does not comprehensively address chemicals under pressure. Because of the substantial packaging integrity inherent in pressure vessel designs, PHMSA believes the chemical under pressure amendments in this rule will result in a positive environmental impact. Flexible Bulk Containers (FBCs). Incorporate a new packaging definition, operational controls, performance-oriented standards, and testing requirements for Flexible Bulk Containers (FBCs). FBCs are flexible bulk packages with a capacity over the currently authorized maximum volumetric capacity for flexible IBCs, but not exceeding 15 cubic meters. FBCs provide shippers the opportunity to utilize a reusable flexible packaging for bulk shipments of certain authorized low-hazard commodities, all of which are currently authorized in non- specification bulk bins. Because of the inherent integrity of a specification packaging design when compared to a non-specification packaging design, PHMSA believes the amendments in this final rule authorizing the construction and use of FBCs will result in a net positive environmental impact due to a possible decrease in the unintentional release of hazardous material. Packaging Authorizations. Part 173 of the HMR prescribes the general requirements for shipment preparation and packaging selection for hazardous materials. Consistent with amendments adopted in the various international standards, we are amending multiple Part 173 packaging sections by authorizing additional packaging specifications used to package hazardous materials. These amendments include, but are not limited to, the authorization to use wood as a material of package construction for certain explosives#

Passage 127, the authorization to use metals other than steel or aluminum for boxes and drums for certain hazardous materials, and the incorporation of authorizations and specifications of FBCs. Because of the substantial integrity in the newly authorized packaging specifications, PHMSA believes the amendments in this final rule will result in a positive environmental impact. Higher integrity packaging designs prevent the unintentional release of hazardous materials when transported in commerce. Vessel Stowage Requirements. The requirements for vessel stowage are described and specified in Sec. 172.101(k) and HMT entries are assigned appropriate vessel stowage codes and stowage special provisions in column 10 of the HMT. We are clarifying these instructions by revising the vessel stowage location requirements for explosives and reducing the number of explosive stowage categories from 15 to 5 in column 10A of the HMT. Specifically, explosive stowage categories 6 through 15 are eliminated, and stowage categories 1 through 5 are retained and modified. We are also adopting modifications to the vessel stowage provisions indicated in column 10B of the HMT. In order to harmonize with the IMDG Code, PHMSA is incorporating the addition of a new definition for protected from sources of heat and potential or possible sources of ignition (see Section 176.2 of this final rule for definitions), and subsequently revise and delete various vessel stowage provisions. The amendments adopted in this final rule consolidate the number of vessel stowage codes for explosives, resulting in greater clarity in the HMR and reducing the potential for unintentional release of hazardous materials. PHMSA believes these changes will have a positive impact on the environment. Conclusion In the NPRM PHMSA sought public comments on our environmental assessment. No comments were received. In this final rule, PHMSA is amending the HMR in response to revisions adopted in the various international standards. Through this integrated and cooperative approach, we believe we can be most successful in reducing incidents, enhancing public safety, and protecting the environment. The amendments are intended to update, clarify, or provide relief from certain existing regulatory requirements and to provide greater flexibility in packaging selection suitable for the transportation of hazardous materials. PHMSA believes#

Passage 128the net environmental impact of this rule will be somewhat positive. Additionally, we believe there will be little or no adverse environmental impact associated with the amendments adopted in this rule. We conclude that there are no significant environmental impacts associated with this rule. Anyone is able to search the electronic form of all comments received into any of our dockets by the name of the individual submitting the comments (or signing the comment, if submitted on behalf of an association, business, labor union, etc.). You may review DOT's complete Privacy Act Statement in the Federal Register published on April 11, 2000 (Volume 65, Number 70; Pages 19477-78) which may be viewed at http://www.gpo.gov/fdsys/pkg/FR-2000-04-11/pdf/00-8505.pdf. K. Executive Order 13609 and International Trade Analysis#

Passage 129Under E.O. 13609, agencies must consider whether the impacts associated with significant variations between domestic and international regulatory approaches are unnecessary or may impair the ability of American business to export and compete internationally. In meeting shared challenges involving health, safety, labor, security, environmental, and other issues, international regulatory cooperation can identify approaches that are at least as protective as those that are or would be adopted in the absence of such cooperation. International regulatory cooperation can also reduce, eliminate, or prevent unnecessary differences in regulatory requirements. Similarly, the Trade Agreements Act of 1979 (Public Law 96-39), as amended by the Uruguay Round Agreements Act (Public Law 103-465), prohibits Federal agencies from establishing any standards or engaging in related activities that create unnecessary obstacles to the foreign commerce of the United States. For purposes of these requirements, Federal agencies may participate in the establishment of international standards, so long as the standards have a legitimate domestic objective, such as providing for safety, and do not operate to exclude imports that meet this objective. The statute also requires consideration of international standards and, where appropriate, that they be the basis for U.S. standards. PHMSA participates in the establishment of international standards to protect the safety of the American public, and we have assessed the effects of this final rule to ensure that it does not cause unnecessary obstacles to foreign trade. In fact, the rule is designed to facilitate international trade. Accordingly, this rulemaking is consistent with E.O. 13609 and PHMSA's obligations under the Trade Agreement Act, as amended. Exports, Hazardous materials transportation, Hazardous waste, Imports, Incorporation by reference, Reporting and recordkeeping requirements. Education, Hazardous materials transportation, Hazardous waste, Incorporation by reference, Labeling, Markings, Packaging and containers, Reporting and recordkeeping requirements. Hazardous materials transportation, Incorporation by reference, Packaging and containers, Radioactive materials, Reporting and recordkeeping requirements, Uranium.#

Passage 130Air carriers, Hazardous materials transportation, Incorporation by reference, Radioactive materials, Reporting and recordkeeping requirements. Hazardous materials transportation, Incorporation by reference, Maritime carriers, Radioactive materials, Reporting and recordkeeping requirements. Hazardous materials transportation, Incorporation by reference, Motor vehicle safety, Packaging and containers, Reporting and recordkeeping requirements. Hazardous materials transportation, Motor carriers, Motor vehicle safety, Packaging and containers, Railroad safety, Reporting and recordkeeping requirements. In consideration of the foregoing, PHMSA is amending 49 CFR Chapter I as follows: PART 171--GENERAL INFORMATION, REGULATIONS, AND DEFINITIONS 0 1. The authority citation for part 171 continues to read as follows: Authority: 49 U.S.C. 5101-5128, 44701; 49 CFR 1.45 and 1.53; Pub. L. 101-410 section 4 (28 U.S.C. 2461 note); Pub. L. 104-134 section 31001. 0 2. Revise Sec. 171.7 to read as follows:#

Passage 131(a) Matter incorporated by reference--(1) General. There is incorporated, by reference in parts 170-189 of this subchapter, matter referred to that is not specifically set forth. This matter is hereby made a part of the regulations in parts 170-189 of this subchapter. The matter subject to change is incorporated only as it is in effect on the date of issuance of the regulation referring to that matter. The material listed in paragraphs (b) through (ee) of this secton have been approved for incorporation by reference by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Material is incorporated as it exists on the date of the approval and a notice of any change in the material will be published in the Federal Register. Matters referenced by footnote are included as part of the regulations of this subchapter. (2) Accessibility of materials. All incorporated matter is available for inspection at: (i) The Office of Hazardous Materials Safety, Office of Hazardous Materials Standards, East Building, PHH-10, 1200 New Jersey Avenue SE., Washington, DC 20590-0001. For information on the availability of this material at PHH-10, call 1-800-467-4922, or go to: http://www.phmsa.dot.gov; and (ii) The National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741- 6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. (b) Air Transport Association of America, 1301 Pennsylvania Avenue NW., Washington, DC 20004-1707. (1) ATA Specification No. 300 Packaging of Airline Supplies, Revision 19, July 31, 1996, into Sec. 172.102. (2) [Reserved] (c) The Aluminum Association, 1525 Wilson Blvd., Suite 6000, Arlington, VA 22209, telephone 703-358-2960, http://www.aluminum.org. (1) Aluminum Standards and Data, Seventh Edition, June 1982, into Sec. Sec. 172.102; 178.65. (2) Welding Aluminum: Theory and Practice, 2002 Fourth Edition, into Sec. 178.68. (d) American National Standards Institute, Inc., 25 West 43rd Street, New York, NY 10036. (1) ANSI/ASHRAE 15-94, Safety Code for Mechanical Refrigeration, 1944, into Sec. Sec. 173.306; 173.307. (2) ANSI B16.5-77, Steel Pipe Flanges, Flanged Fittings, 1977, into Sec. 178.360-4.#

Passage 132(3) ANSI N14.1 Uranium Hexafluoride--Packaging for Transport, 1971 Edition, into Sec. Sec. 173.417; 173.420. (4) ANSI N14.1 Uranium Hexafluoride--Packaging for Transport, 1982 Edition, into Sec. Sec. 173.417; 173.420. (5) ANSI N14.1 Uranium Hexafluoride--Packaging for Transport, 1987 Edition, into Sec. Sec. 173.417; 173.420. (6) ANSI N14.1 Uranium Hexafluoride--Packaging for Transport, 1990 Edition, into Sec. Sec. 173.417; 173.420. (7) ANSI N14.1 Uranium Hexafluoride--Packaging for Transport, 1995 Edition, into Sec. Sec. 173.417; 173.420. (8) ANSI N14.1 Uranium Hexafluoride--Packaging for Transport, 2001 Edition, into Sec. Sec. 173.417; 173.420. (e) American Petroleum Institute, 1220 L Street NW., Washington, DC 20005-4070. (1) API Recommended Practice Closures of Underground Petroleum Storage Tanks, 3rd Edition, March 1996, into Sec. 172.102. (2) [Reserved] (f) American Pyrotechnics Association (APA), P.O. Box 30438, Bethesda, MD 20824, (301) 907-8181, www.americanpyro.com. (1) APA Standard 87-1, Standard for Construction and Approval for Transportation of Fireworks, Novelties, and Theatrical Pyrotechnics, December 1, 2001 version into Sec. 173.56. (2) [Reserved] (g) American Society of Mechanical Engineers, ASME International, 22 Law Drive, P.O. Box 2900, Fairfield, NJ 07007-2900, telephone 1-800- 843-2763 or 1-973-882-1170, http://www.asme.org. (1) `ASME Code'; ASME Code, Sections II (Parts A and B), V, VIII (Division 1), and IX of 1998 Edition of American Society of Mechanical Engineers Boiler and Pressure Vessel Code, into Sec. Sec. 172.102; 173.5b; 173.24b; 173.32; 173.306; 173.315; 173.318; 173.420; 178.245-1; 178.245-3; 178.245-4; 178.245-6; 178.245-7; 178.255-1; 178.255-2; 178.255-14; 178.255-15; 178.270-2; 178.270-3; 178.270-7; 178.270-9; 178.270-11; 178.270-12; 178.271-1; 178.272-1; 178.273; 178.274; 178.276; 178.277; 178.320; 178.337-1; 178.337-2; 178.337-3; 178.337-4; 178.337-6; 178.337-16; 178.337-18; 178.338-1; 178.338-2; 178.338-3; 178.338-4; 178.338-5; 178.338-6; 178.338-13; 178.338-16; 178.338-18; 178.338-19; 178.345-1; 178.345-2; 178.345-3; 178.345-4; 178.345-7; 178.345-14; 178.345-15; 178.346-1; 178.347-1; 178.348-1; 179.400-3; 180.407. (2) ASME B31.4-1998 Edition, Pipeline Transportation Systems for Liquid Hydrocarbons and other Liquids, Chapters II, III, IV, V and VI, November 11, 1998, into Sec. 173.5a. (h) American Society for Testing#

Passage 133and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 1942, telephone (610) 832-9585, http://www.astm.org. Copies of historical standards or standards that ASTM does not have may be purchased from: Engineering Societies Library, 354 East 47th Street, New York, NY 10017. (1) ASTM A 20/A 20M-93a Standard Specification for General Requirements for Steel Plates for Pressure Vessels, 1993, into Sec. Sec. 178.337-2; 179.102-4; 179.102-1; 179.102-17. (2) ASTM A 47-68 Malleable Iron Castings, 1968, into Sec. 179.200- 15. (3) ASTM A 53/A 53M-06a (ASTM A 53) Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless, 2006, into Sec. 173.5b. (4) ASTM A 106/A 106M-06a (ASTM A 106) Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service, 2006, into Sec. 173.5b. (5) ASTM A 240/A 240M-99b Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels, 1999, into Sec. Sec. 178.57; 178.358-5; 179.100-7; 179.100-10; 179.102-1; 179.102-4; 179.102-17; 179.200-7; 179.201-5; 179.220-7; 179.300-7; 179.400-5. (6) ASTM A 242-81 Standard Specification for High-Strength Low- Alloy Structural Steel, 1981, into Sec. 178.338-2. (7) ASTM A 262-93a Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels, 1993, into 179.100-7; 179.200-7; 179.201-4. (8) ASTM A 285-78 Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength, 1978, into Sec. 179.300-7. (9) ASTM A 300-58 Steel Plates for Pressure Vessels for Service at Low Temperatures, 1958, into Sec. 178.337-2. (10) ASTM A 302/A 302M-93 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese- Molybdenum Nickel, 1993, into Sec. 179.100-7; 179.200-7; 179.220-7. (11) ASTM A 333-67 Seamless and Welded Steel Pipe for Low- Temperature Service, 1967, into Sec. 178.45. (12) ASTM A 370-94 Standard Test 179.102-1; 179.102-4; Methods and Definitions for Mechanical Testing of Steel Products, 1994, into Sec. Sec. 179.102-17; 179.102-1; 179.102-4. (13) ASTM A 441-81 Standard Specification for High-Strength Low- Alloy Structural Manganese Vanadium Steel, 1981, into Sec. 178.338-2. (14) ASTM A 514-81 Standard Specification for High-Yield Strength Quenched and Tempered Alloy Steel Plate, Suitable for Welding, 1981,#

Passage 134into Sec. 178.338-2. (15) ASTM A 515/A 515M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service, 2003, into Sec. 179.300-7. (16) ASTM A 516/A 516M-90 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service, 1990, into Sec. 178.337-2; 179.100-7; 179.102-1; 179.102-2; 179.102-4; 179.102-17; 179.200-7; 179.220-7; 179.300-7. (17) ASTM A 537/A 537M-91 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, 1991, into Sec. 179.100-7; 179.102-4; 179.102-17. (18) ASTM A 572-82 Standard Specification for High-Strength Low- Alloy Columbian-Vanadium Steels of Structural Quality, 1982, into Sec. 178.338-2. (19) ASTM A 588-81 Standard Specification for High-Strength Low- Alloy Structural Steel with 50 Ksi Minimum Yield Point to 4 in. Thick, 1981, into Sec. 178.338-2. (20) ASTM A 606-75 Standard Specification for Steel Sheet and Strip Hot-Rolled and Cold-Rolled, High-Strength, Low-Alloy, with Improved Atmospheric Corrosion Resistance, 1975 (Reapproved 1981), into Sec. 178.338-2. (21) ASTM A 607-98 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot- Rolled and Cold-Rolled, 1998, into Sec. 178.338-2. (22) ASTM A 612-72a High Strength Steel Plates for Pressure Vessels for Moderate and Lower Temperature Service, 1972, into Sec. 178.337-2. (23) ASTM A 633-79a Standard Specification for Normalized High- Strength Low-Alloy Structural Steel, 1979 Edition, into Sec. 178.338- 2. (24) ASTM A 715-81 Standard Specification for Steel Sheet and Strip, Hot-Rolled, High-Strength, Low-Alloy with Improved Formability, 1981, into Sec. 178.338-2. (25) ASTM A 1008/A 1008M-03 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High Strength Low-Alloy with Improved Formability, 2003, into Sec. 178.338-2; 178.345-2. (26) ASTM A 1011/A 1011M-03a Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low Alloy#

Passage 135and High Strength Low-Alloy with Improved Formability, 2003, into Sec. 178.338-2; 178.345-2. (27) ASTM B 162-93a Standard Specification for Nickel Plate, Sheet, and Strip, 1993, into Sec. 173.249; 179.200-7. (28) ASTM B 209-93 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate, 1993, into Sec. 179.100-7; 179.200-7; 179.220-7. (29) ASTM B 221-76 Aluminum Alloy Extruded Bars, Rods, Shapes, and Tubes, 1976, into Sec. 178.46. (30) ASTM B 557-84 Tension Testing Wrought and Cast Aluminum and Magnesium-Alloy Products, 1984, into Sec. 178.46. (31) ASTM B 580-79 Standard Specification for Anodic Oxide Coatings on Aluminum, (Re-approved 2000), into Sec. 173.316; 173.318; 178.338- 17. (32) ASTM D 56-05, Standard Test Method for Flash Point by Tag Closed Cup Tester, approved May 1, 2005, into Sec. 173.120. (33) ASTM D 86-07a, Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure, approved April 1, 2007, into Sec. 173.121. (34) ASTM D 93-08, Standard Test Methods for Flash Point by Pensky- Martens Closed Cup Tester, approved October 15, 2008, into Sec. 173.120. (35) ASTM D 1078-05, Standard Test Method for Distillation Range of Volatile Organic Liquids, approved May 15, 2005, into Sec. 173.121. (36) ASTM D 1238-90b Standard Test Method for Flow Rates of Thermoplastics for Extrusion Plastometer, 1990, into Sec. 173.225. (37) ASTM D 1709-01 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method, 2001, into Sec. 173.197. (38) ASTM D 1835-97 Standard Specification for Liquefied Petroleum (LP) Gases, 1997, into Sec. 180.209. (39) ASTM D 1838-64 Copper Strip Corrosion by Liquefied Petroleum (LP) Gases, 1964, into Sec. 173.315. (40) ASTM D 1922-00a Standard Test Method for Propogation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method, 2000, into Sec. 173.197. (41) ASTM D 3278-96 (Reapproved 2004) E1, Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus, approved November 1, 2004, into Sec. 173.120. (42) ASTM D 3828-07a, Standard Test Methods for Flash Point by Small Scale Closed Cup Tester, approved July 15, 2007, Sec. 173.120. (43) ASTM D 4206-96 Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus, 1996, into Sec. 173.120. (44) ASTM D 4359-90 Standard Test Method for Determining Whether a Ma#

Passage 136terial is a Liquid or a Solid, 1990 into Sec. 171.8. (45) ASTM E 8-99 Standard Test Methods for Tension Testing of Metallic Materials, 1999, into Sec. 178.36; 178.37; 178.38; 178.39; 178.44; 178.45; 178.50; 178.51; 178.53; 178.55; 178.56; 178.57; 178.58; 178.59; 178.60; 178.61; 178.68. (46) ASTM E 23-98 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials, 1998, into Sec. 178.57. (47) ASTM E 112-88 Standard Test Methods for Determining Average Grain Size, 1988, into Sec. 178.44. (48) ASTM E 112-96 Standard Test Methods for Determining Average Grain Size, 1996 Edition, into Sec. 178.274; Part 178, appendix A. (49) ASTM E 114-95 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method, 1995, into Sec. 178.45. (50) ASTM E 213-98 Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing, into Sec. 178.45. (51) ASTM E 290-97a Standard Test Methods for Bend Testing of Material for Ductility, published February 1998, into Sec. 178.37. (i) American Water Works Association, 1010 Vermont Avenue NW., Suite 810, Washington, DC 20005. (1) AWWA Standard C207-55, Steel Pipe Flanges, 1955, into Sec. 178.360-4. (2) [Reserved] (j) American Welding Society, 550 NW. Le Jeune Road, Miami, Florida 33126. (1) AWS Code B 3.0; Standard Qualification Procedure; 1972 (FRB 3.0-41, rev. May 1973), into Sec. Sec. 178.356-2, 178.358-2. (2) AWS Code D 1.0; Code for Welding in Building Construction (FR D 1.0-66, 1966), into Sec. Sec. 178.356-2; 178.358-2. (k) Association of American Railroads, American Railroads Building, 50 F Street NW., Washington, DC 20001; telephone (877) 999-8824, http://www.aar.org/publications.com. (1) AAR Manual of Standards and Recommended Practices, Section C-- Part III, Specifications for Tank Cars, Specification M-1002, (AAR Specifications for Tank Cars), December 2000, Sec. 173.31; 179.6; 179.7; 179.15; 179.16; 179.20; 179.22; 179.100-9; 179.100-10; 179.100- 12; 179.100-13; 179.100-14; 179.100-18; 179.101-1; 179.102-1; 179.102- 4; 179.102-17; 179.103-5; 179.200-7; 179.200-9; 179.200-10; 179.200-11; 179.200-13; 179.200-17; 179.200-22; 179.201-6; 179.220-6; 179.220-7; 179.220-10; 179.220-11; 179.220-14; 179.220-18; 179.220-26; 179.300-9; 179.300-10; 179.300-15; 179.300-17; 179.400-5; 179.400-6; 179.400-8; 179.400-11; 179.400-12; 179.400-15; 179.400-18; 179.400-20; 179.400-25; 180.509; 180.513; 1#

Passage 13780.515; 180.517. (2) AAR Manual of Standards and Recommended Practices, Section I, Specially Equipped Freight Car and Intermodal Equipment, 1988, into Sec. 174.55; 174.63. (3) AAR Specifications for Design, Fabrication and Construction of Freight Cars, Volume 1, 1988, into Sec. 179.16. (4) AAR Standard 286; AAR Manual of Standards and Recommended Practices, Section C, Car Construction Fundamentals and Details, Standard S-286, Free/Unrestricted Interchange for 286,000 lb Gross Rail Load Cars (Adopted 2002; Revised: 2003, 2005, 2006), into 179.13. (l) Chlorine Institute, Inc., 1300 Wilson Boulevard, Arlington, VA 22209. (1) Chlorine Institute Emergency Kit ``A'' for 100-lb. & 150 lb. Chlorine Cylinders (with the exception of repair method using Device 8 for side leaks), Edition 10, June 2003, into 173.3. (2) Chlorine Institute Emergency Kit ``B'' for Chlorine Ton Containers (with the exception of repair method using Device 9 for side leaks), Edition 9, June 2003, into 173.3. (3) Type 1 JQ 225, Dwg., H51970, Revision F, November 1996, into Sec. 173.315. (4) Type 1 JQ 225, Dwg. H50155, Revision H, November 1996, into Sec. 173.315. (5) Section 3, Pamphlet 57, Emergency Shut-Off Systems for Bulk Transfer of Chlorine, Edition 4, October 2003, into Sec. 177.840. (6) Section 3, Pamphlet 166, Angle Valve Guidelines for Chlorine Bulk Transportation, 1st Edition, October 2002, into Sec. 178.337-9. (7) Standard Chlorine Angle Valve Assembly, Dwg. 104-8, July 1993, into Sec. 178.337-9. (8) Excess Flow Valve with Removable Seat, Dwg. 101-7, July 1993, into Sec. 178.337-8. (9) Excess Flow Valve with Removable Basket, Dwg. 106-6, July 1993, into Sec. 178.337-8. (10) Standards for Housing and Manway Covers for Steel Cargo Tanks, Dwgs. 137-1 and 137-2, September 1, 1982, into Sec. 178.337-10. (11) Typical Manway Arrangement Chlorine Cargo Tank, Dwg 137-5, November 1996, into 178.337-10. (m) Canadian General Standards Board, Place du Portage III, 6B1 11 Laurier Street, Gatineau, Quebec, Canada K1A 1G6. (1) National Standard of Canada (CAN/CGSB 43.147--2005)#

Passage 138Construction, Modification, Qualification, Maintenance, and Selection and Use of Means of Containment for the Handling, Offering for Transport, or Transportation of Dangerous Goods by Rail, into Sec. 171.12. (2) [Reserved] (n) Compressed Gas Association (CGA), 1235 Jefferson Davis Highway, Arlington, VA 22202. (1) CGA Pamphlet C-3, Standards for Welding on Thin-Walled Steel Cylinders, 1994, into Sec. 178.47; 178.50; 178.51; 178.53; 178.55; 178.56; 178.57; 178.58; 178.59; 178.60; 178.61; 178.65; 178.68; 180.211. (2) CGA C-5, Cylinder Service Life--Seamless Steel High Pressure Cylinders, 1991 (reaffirmed 1995), into Sec. 173.302a. (3) CGA Pamphlet C-6, Standards for Visual Inspection of Steel Compressed Gas Cylinders, 1993, into Sec. 173.3, 173.198, 180.205, 180.209, 180.211, 180.411, 180.519. (4) CGA Pamphlet C-6.1, Standards for Visual Inspection of High Pressure Aluminum Compressed Gas Cylinders, 2002, Fourth Edition, into Sec. 180.205; 180.209. (5) CGA Pamphlet C-6.2, Guidelines for Visual Inspection and Requalification of Fiber Reinforced High Pressure Cylinders, 1996, Third Edition, into Sec. 180.205. (6) CGA Pamphlet C-6.3, Guidelines for Visual Inspection and Requalification of Low Pressure Aluminum Compressed Gas Cylinders, 1991, into Sec. 180.205; 180.209. (7) CGA C-7, Guide to Preparation of Precautionary Labeling and Marking of Compressed Gas Containers, Appendix A, issued 2004 (8th Edition), into Sec. 172.400a. (8) CGA Pamphlet C-8, Standard for Requalification of DOT-3HT Cylinder Design, 1985, into Sec. 180.205; 180.209. (9) CGA Pamphlet C-11, Recommended Practices for Inspection of Compressed Gas Cylinders at Time of Manufacture, 2001, Third Edition, into Sec. 178.35. (10) CGA Pamphlet C-12, Qualification Procedure for Acetylene Cylinder Design, 1994, into Sec. 173.301; 173.303; 178.59; 178.60. (11) CGA Pamphlet C-13, Guidelines for Periodic Visual Inspection and Requalification of Acetylene Cylinders, 2000, Fourth Edition, into Sec. 173.303; 180.205; 180.209. (12) CGA Pamphlet C-14, Procedures for Fire Testing of DOT Cylinder Pressure Relief Device Systems, 1979, into Sec. 173.301; 173.323. (13) CGA Pamphlet G-2.2, Guideline Method for Determining Minimum of 0.2% Water in Anhydrous Ammonia, 1985, Second Edition, Reaffirmed 1997, into Sec. 173.315. (14) CGA Pamphlet G-4.1, Cleaning Equipment for Oxygen Service, 1985, into Sec. 178.338-15. (15) C#

Passage 139GA Pamphlet P-20, Standard for the Classification of Toxic Gas Mixtures, 1995, into Sec. 173.115. (16) CGA Pamphlet P-20, Standard for the Classification of Toxic Gas Mixtures, 2003, Third Edition, into Sec. 173.115. (17) CGA S-1.1, Pressure Relief Device Standards--Part 1--Cylinders for Compressed Gases, (with the exception of paragraph 9.1.1.1), Twelfth Edition, 2005, into Sec. 173.301, 173.304a 178.75. (18) CGA Pamphlet S-1.2, Safety Relief Device Standards Part 2-- Cargo and Portable Tanks for Compressed Gases, 1980, into Sec. 173.315; 173.318; 178.276; 178.277. (19) CGA S-7, Method for Selecting Pressure Relief Devices for Compressed Gas Mixtures in Cylinders, 2005, into Sec. 173.301. (20) CGA Technical Bulletin TB-2, Guidelines for Inspection and Repair of MC-330 and MC-331 Cargo Tanks, 1980, into Sec. 180.407; 180.413. (21) CGA Technical Bulletin TB-25, Design Considerations for Tube Trailers, 2008 Edition, into Sec. 173.301. (o) Department of Defense (DOD), 2461 Eisenhower Avenue, Alexandria, VA 22331. (1) DOD TB 700-2; NAVSEAINST 8020.8B; AFTO 11A-1-47; DLAR 8220.1: Explosives Hazard Classification Procedures, January 1998, into Sec. 173.56. (2) Packaging of Hazardous Material, DLAD 4145.41/AR 700-143/AFJI 24-210/NAVSUPINST 4030.55B/MCO 4030.40B, January 14, 2000, into Sec. 173.7 (p) Department of Energy (USDOE), 100 Independence Avenue SW., Washington, DC 20545. USDOE publications available from: Superintendent of Documents, Government Printing Office (GPO) or The National Technical Information Service (NTIS). (1) USDOE, CAPE-1662, Revision 1, and Supplement 1, Civilian Application Program Engineering Drawings, April 6, 1988, into Sec. Sec. 178.356-1; 178.356-2; 178.358-1; 178.358-2; 178.358-3; 178.358-4. (2) USDOE, Material and Equipment Specification No. SP-9, Rev. 1, and Supplement--Fire Resistant Phenolic Foam, March 28, 1968, into Sec. Sec. 178.356-2; 178.358-2. (3) USDOE, KSS-471,--Proposal for Modifications to U.S. Department of Transportation Specification 21PF-1, Fire and Shock Resistant Phenolic Foam--Insulated Metal Overpack, November 30, 1986, into Sec. 178.358-1; 178.358-3. (q) General Services Administration, Specification Office, Room 6662, 7th and D Street, S.W., Washington, DC 20407. (1) Federal Specification RR-C-901D, Cylinders, Compressed Gas: Seamless Shatterproof, High Pressure DOT 3AA Steel, and 3AL Aluminum, February 21, 200#

Passage 1403, into Sec. Sec. 173.302; 173.336; 173.337. (2) [Reserved] (r) Institute of Makers of Explosives, 1120 19th Street NW., Suite 310, Washington, DC 20036-3605. (1) IME Standard 22,IME Safety Library Publication No. 22, Recommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials, February 2007, into Sec. Sec. 173.63; 177.835. (2) [Reserved] (s) International Atomic Energy Agency (IAEA), P.O. Box 100, Wagramer Strasse 5, A-1400 Vienna, Austria. Also available from: Bernan Associates, 4611-F Assembly Drive, Lanham, MD 20706-4391, USA; or Renouf Publishing Company, Ltd., 812 Proctor Avenue, Ogdensburg, New York 13669, USA. (1) No. TS-R-1 (ST-1, Revised), Regulations for the Safe Transport of Radioactive Material, (IAEA Regulations), 1996 Edition (Revised), into Sec. 171.22; 171.23; 171.26, 173.415, 173.416, 173.417, 173.473. (2) [Reserved] (t) International Civil Aviation Organization (``ICAO''), 999 University Street, Montr[eacute]al, Quebec H3C 5H7, Canada, 1-514-954- 8219, http://www.icao.int. ICAO Technical Instructions available from: INTEREG, International Regulations, Publishing and Distribution Organization, P.O. Box 60105, Chicago, IL 60660. (1) Technical Instructions for the Safe Transport of Dangerous Goods by Air (ICAO Technical Instructions), 2013-2014 Edition, into Sec. Sec. 171.8; 171.22; 171.23; 171.24; 172.101; 172.202; 172.401; 172.512; 172.519; 172.602; 173.56; 173.320; 175.10, 175.33; 178.3. (2) [Reserved] (u) International Electrotechnical Commission (IEC), 3 rue de Varemb[eacute], P.O. Box 131, CH--1211, GENEVA 20, Switzerland. (1) IEC 62282-6-100:2010(E), Fuel cell technologies--Part 6-100: Micro fuel cell power systems--Safety, Edition 1.0, March 2010, into Sec. Sec. 173.230; 175.10. (2) 62282-6-100 Amend. 1 IEC 2012(E), Amendment 1 to IEC 62282-6- 100: Fuel cell technologies--Part 6-100: Micro fuel cell power systems--Safety,#

Passage 141Edition 1.0, October 2012, into Sec. Sec. 173.230; 175.10 (v) International Maritime Organization (``IMO''), 4 Albert Embankment, London, SE1 7SR, United Kingdom or New York Nautical Instrument & Service Corporation, 140 West Broadway, New York, NY 10013, +44 (0) 20 7735 7611, http://www.imo.org. (1) International Convention for the Safety of Life at Sea, 1974, Consolidated Edition (SOLAS), Chapter II-2, Construction--Fire protection, fire detection and fire extinction, Regulation 19, Carriage of dangerous goods, Fifth Edition 2009, into Sec. Sec. 176.63, 176.84. (2) International Maritime Dangerous Goods Code (IMDG Code), Incorporating Amendment 36-12 (English Edition), 2011, into Sec. Sec. 171.22; 171.23; 171.25; 172.101 172.202; 172.203 172.401; 172.502; 172.519; 172.602; 173.21; 173.56; 176.2; 176.5; 176.11; 176.27; 176.30; 176.83; 176.84; 176.140; 176.720; 178.3; 178.274. (w) International Organization for Standardization, Case Postale 56, CH-1211, Geneve 20, Switzerland, http://www.iso.org. Also available from: ANSI 25, West 43rd Street, New York, NY 10036, 1-212-642-4900, http://www.ansi.org. (1) ISO 535-1991(E) Paper and board--Determination of water absorptiveness--Cobb method, 1991, into Sec. 178.516; 178.707; 178.708. (2) ISO 1496-1: 1990 (E)--Series 1 freight containers-- Specification and testing, Part 1: General cargo containers. Fifth Edition, (August 15, 1990), into Sec. 173.411. (3) ISO 1496-3(E)--Series 1 freight containers--Specification and testing--Part 3: Tank containers for liquids, gases and pressurized dry bulk, Fourth edition, March 1995, into Sec. 178.74; 178.75; 178.274. (4) ISO 1516:2002(E), Determination of flash/no flash--Closed cup equilibrium method, Third Edition, 2002-03-01, into Sec. 173.120. (5) ISO 1523:2002(E), Determination of flash point--Closed cup equilibrium method, Third Edition, 2002-03-01, into Sec. 173.120. (6) ISO 2431-1984(E) Standard Cup Method, 1984, into Sec. 173.121. (7) ISO 2592:2000(E), Determination of flash and fire points-- Cleveland open cup method, Second Edition, 2000-09-15, into Sec. 173.120. (8) ISO 2719:2002(E), Determination of flash point--Pensky-Martens closed cup method, Third Edition, 2002-11-15, into Sec. 173.120. (9) ISO 2919-1980(E) Sealed radioactive sources--Classification, 1980, into Sec. 173.469. (10) ISO 3036-1975(E) Board--Determination of puncture resistance, 1975, into Sec. 178.#

Passage 142708. (11) ISO 3405:2000(E), Petroleum products--Determination of distillation characteristics at atmospheric pressure, Third Edition, 2000-03-01, into Sec. 173.121. (12) ISO 3574-1986(E) Cold-reduced carbon steel sheet of commercial and drawing qualities, into Sec. 178.503; Part 178, appendix C. (13) ISO 3679:2004(E), Determination of flash point--Rapid equilibrium closed cup method, Third Edition, 2004-04-01, into Sec. 173.120. (14) ISO 3680:2004(E), Determination of flash/no flash--Rapid equilibrium closed cup method, Fourth Edition, 2004-04-01, into Sec. 173.120. (15) ISO 3807-2(E), Cylinders for acetylene--Basic requirements-- Part 2: Cylinders with fusible plugs, First edition, March 2000, into Sec. Sec. 173.303; 178.71. (16) ISO 3924:1999(E), Petroleum products--Determination of boiling range distribution--Gas chromatography method, Second Edition, 1999-08- 01, into Sec. 173.121. (17) ISO 4126-1:2004(E): Safety devices for protection against excessive pressure--Part 1: Safety valves, Second edition 2004-02-15, into Sec. 178.274. (18) ISO 4126-7:2004(E): Safety devices for protection against excessive pressure--Part 7: Common data, First Edition 2004-02-15 into Sec. 178.274. (19) ISO 4126-7:2004/Cor.1:2006(E): Safety devices for protection against excessive pressure--Part 7: Common data, Technical Corrigendum 1, 2006-11-01, into Sec. 178.274. (20) ISO 4626:1980(E), Volatile organic liquids--Determination of boiling range of organic solvents used as raw materials, First Edition, 1980-03-01, into Sec. 173.121. (21) ISO 4706:2008(E), Gas cylinders--Refillable welded steel cylinders--Test pressure 60 bar and below, First Edition, 2008-04-15, Corrected Version, 2008-07-01, into Sec. 178.71. (22) ISO 6406(E), Gas cylinders--Seamless steel gas cylinders-- Periodic inspection and testing, Second edition, February 2005, into Sec. 180.207. (23) ISO 6892 Metallic materials--Tensile testing, July 15, 1984, First Edition, into Sec. 178.274. (24) ISO 7225(E), Gas cylinders--Precautionary labels, Second Edition, July 2005, into Sec. 178.71. (25) ISO 7866(E), Gas cylinders--Refillable seamless aluminum alloy gas cylinders--Design, construction and testing, First edition, June 1999, into Sec. 178.71. (26) ISO 8115 Cotton bales--Dimensions and density, 1986 Edition, into Sec. 172.102. (27) ISO 9809-1(E): Gas cylinders--Refillable seamless steel gas cylinders--Design, con#

Passage 143struction and testing--Part 1: Quenched and tempered steel cylinders with tensile strength less than 1100 MPa., First edition, June 1999, into Sec. Sec. 178.71; 178.75. (28) ISO 9809-2(E): Gas cylinders--Refillable seamless steel gas cylinders--Design, construction and testing--Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1100 MPa., First edition, June 2000, into Sec. Sec. 178.71; 178.75. (29) ISO 9809-3 (E): Gas cylinders--Refillable seamless steel gas cylinders--Design, construction and testing--Part 3: Normalized steel cylinders, First edition, December 2000, into Sec. Sec. 178.71; 178.75. (30) ISO 9978:1992(E)--Radiation protection--Sealed radioactive sources--Leakage test methods. First Edition, (February 15, 1992), into Sec. 173.469. (31) ISO 10156:2010(E): Gases and gas mixtures--Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets, Third edition, 2010-04-01, into Sec. 173.115. (32) ISO 10156:2010/Cor.1:2010(E): Gases and gas mixtures-- Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets, Technical Corrigendum 1, 2010-09-01, into Sec. 173.115. (33) ISO 10297:2006(E), Transportable gas cylinders--Cylinder valves--Specification and type testing, Second Edition, 2006-01-15, into Sec. 173.301b; 178.71. (34) ISO 10461:2005(E), Gas cylinders--Seamless aluminum-alloy gas cylinders--Periodic inspection and testing, Second Edition, 2005-02-15 and Amendment 1, 2006-07-15, into Sec. 180.207. (35) ISO 10462 (E), Gas cylinders--Transportable cylinders for dissolved acetylene--Periodic inspection and maintenance, Second edition, February 2005, into Sec. 180.207. (36) ISO 10692-2:2001(E), Gas cylinders--Gas cylinder valve connections for use in the micro-electronics industry--Part 2: Specification and type testing for valve to cylinder connections, First Edition, 2001-08-01, into Sec. 173.40. (37) ISO 11114-1(E), Transportable gas cylinders--Compatibility of cylinder and valve materials with gas contents--Part 1: Metallic materials, First edition, October 1997, into Sec. Sec. 173.301b; 178.71.#

Passage 144(38) ISO 11114-2(E), Transportable gas cylinders--Compatibility of cylinder and valve materials with gas contents--Part 2: Non-metallic materials, First edition, December 2000, into Sec. Sec. 173.301b; 178.71. (39) ISO 11117:2008(E): Gas cylinders--Valve protection caps and valve guards--Design, construction and tests, Second edition, 2008-09- 01, into Sec. 173.301b. (40) ISO 11117:2008/Cor.1:2009(E): Gas cylinders--Valve protection caps and valve guards--Design, construction and tests, Technical Corrigendum 1, 2009-05-01, into Sec. 173.301b. (41) ISO 11118(E), Gas cylinders--Non-refillable metallic gas cylinders--Specification and test methods, First edition, October 1999, into Sec. 178.71. (42) ISO 11119-1(E), Gas cylinders--Gas cylinders of composite construction--Specification and test methods--Part 1: Hoop-wrapped composite gas cylinders, First edition, May 2002, into Sec. 178.71. (43) ISO 11119-2(E), Gas cylinders--Gas cylinders of composite construction--Specification and test methods--Part 2: Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners, First edition, May 2002, into Sec. 178.71. (44) ISO 11119-3(E), Gas cylinders of composite construction-- Specification and test methods--Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners, First edition, September 2002, into Sec. 178.71. (45) ISO 11120(E), Gas cylinders--Refillable seamless steel tubes of water capacity between 150 L and 3000 L--Design, construction and testing, First edition, March 1999, into Sec. Sec. 178.71; 178.75. (46) ISO 11621(E), Gas cylinders--Procedures for change of gas service, First edition, April 1997, into Sec. Sec. 173.302, 173.336, 173.337. (47) ISO 11623(E), Transportable gas cylinders--Periodic inspection and testing of composite gas cylinders, First edition, March 2002, into Sec. 180.207. (48) ISO 13340:2001(E) Transportable gas cylinders--Cylinder valves for non-refillable cylinders--Specification and prototype testing, First edition, 2004-04-01, into Sec. Sec. 173.301b; 178.71. (49) ISO 13736:2008(E), Determination of flash point--Abel closed- cup method, Second Edition, 2008-09-15, into Sec. 173.120. (50) ISO 16111:2008(E), Transportable gas storage devices--Hydrogen absorbed in reversible metal hydride, First Edition, 2008-11-15, into Sec. Sec. 173.301b; 173.311; 178.71.#

Passage 145(51) ISO 18172-1:2007(E), Gas cylinders--Refillable welded stainless steel cylinders--Part 1: Test pressure 6 MPa and below, First Edition, 2007-03-01, into Sec. 178.71. (52) ISO 20703:2006(E), Gas cylinders--Refillable welded aluminum- alloy cylinders--Design, construction and testing, First Edition, 2006- 05-01, into Sec. 178.71. (x) National Board of Boiler and Pressure Vessel Inspectors, 1055 Crupper Avenue, Columbus, Ohio 43229. (1) NB-23, National Board Inspection Code, A Manual for Boiler and Pressure Vessel Inspectors, 1992 Edition, into Sec. 180.413. (2) [Reserved] (y) National Fire Protection Association, 1 Batterymarch Park, Quincy, MA, 02169-7471 1-617-770-3000, http://www.nfpa.org. (1) NFPA 58-Liquefied Petroleum Gas Code, 2001 Edition, into Sec. Sec. 173.5, 173.315. (2) NFPA 498-Standards for Safe Havens and Interchange Lots for Vehicles Transporting Explosives, 2010 Edition, into Sec. 177.835. (z) National Institute of Standards and Technology, Department of Commerce, 5285 Port Royal Road, Springfield, VA 22151. (1) USDC, NBS Handbook H-28 (1957), 1957 Handbook of Screw-Thread Standards for Federal Services, December 1966 Edition, into Sec. Sec. 179.2; 178.45; 178.46. (2) [Reserved] (aa) Organization for Economic Cooperation and Development (OECD), OECD Publications and Information Center, 2001 L Street, N.W., Suite 700, Washington, DC 20036. (1) Test No. 404: Acute Dermal Irritation/Corrosion, OECD Guidelines for the Testing of Chemicals, Section 4: Health Effects, adopted April 24, 2002, into Sec. 173.137. (2) Test No. 430: In VitroSkin Corrosion: Transcutaneous Electrical Resistance Test (TER), OECD Guidelines for the Testing of Chemicals, Section 4: Health Effects, adopted April 13, 2004, into Sec. 173.137. (3) OECD (2004), Test No. 431: In VitroSkin Corrosion: Human Skin Model Test, OECD Guidelines for the Testing of Chemicals, Section 4: Health Effects, OECD Publishing, adopted April 13, 2004, into Sec. 173.137. (4) Test No. 435: In VitroMembrane Barrier Test Method for Skin Corrosion, OECD Guidelines for the Testing of Chemicals, Section 4: Health Effects, adopted July 19, 2006, into Sec. 173.137. (bb) Transport Canada, TDG Canadian Government Publishing Center, Supply and Services, Canada, Ottawa, Ontario, Canada K1A 059, 416-973- 1868, http://www.tc.gc.ca. (1) Transportation of Dangerous Goods Regulations (Transport Canada TDG Regula#

Passage 146tions), into Sec. Sec. 171.12; 171.22; 171.23; 172.401; 172.502; 172.519; 172.602; 173.31; 173.32; 173.33. (i) SOR 2001-286, including Clear Language Amendments, August 2001. (ii) SOR/2002-306 August 8, 2002. (iii) SOR/2003-273 July 24, 2003 (iv) SOR/2003-400 December 3, 2003 (v) SOR/2005-216 July 13, 2005 (vi) SOR/2005-279 September 21, 2005 (vii) SOR/2008-34 February 7, 2008 (viii) SOR/2007-179 July 31, 2007 (2) [Reserved] (cc) Truck Trailer Manufacturers Association, 1020 Princess Street, Alexandria, Virginia 22314. (1) TTMA RP No. 61-98, Performance of manhole and/or Fill Opening Assemblies on MC 306, DOT 406, Non-ASME MC 312 and Non-ASME DOT 412 Cargo Tanks, June 1, 1998, into Sec. 180.405. (2) TTMA RP No. 81-97, Performance of Spring Loaded Pressure Relief Valves on MC 306, MC 307, MC 312, DOT 406, DOT 407, and DOT 412 Tanks, July 1, 1997 Edition, into Sec. Sec. 178.345-10; 178.346-3. (3) TTMA TB No. 107, Procedure for Testing In-Service Unmarked and/ or Uncertified MC 306 and Non-ASME MC 312 Type Cargo Tank Manhole Covers, June 1, 1998 Edition, into Sec. 180.405. (dd) United Nations, Publications, 2 United Nations Plaza, Room DC2-853, New York, NY 10017, 1-212-963-8302, http://unp.un.org. (1) UN Recommendations on the Transport of Dangerous Goods, Model Regulations (UN Recommendations), 17th revised edition, Volumes I and II (2011), into Sec. Sec. 171.8; 171.12; 172.202; 172.401; 172.407; 172.502; 173.22; 173.24; 173.24b; 173.40; 173.56; 173.192; 173.302b; 173.304b; 178.75; 178.274. (2) UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria, fifth revised edition, amendment 1 (2011) (Manual of Tests and Criteria), into Sec. Sec. 172.102; 173.21; 173.56; 173.57; 173.58; 173.60; 173.115; 173.124; 173.125; 173.127; 173.128; 173.137; 173.185; 173.220; Part 173, appendix H; 178.274. (ee) United States Enrichment Corporation, Inc. (USEC), USEC Inc., 6903 Rockledge Drive, Bethesda, MD 20817. (1) USEC-651--Good Handling Practices for Uranium Hexafluoride, Revision 8, January 1999, into Sec. 173.417.#

Passage 147Table 1 to 49 CFR 171.7--Materials Not Incorporated by Reference ------------------------------------------------------------------------ Source and name of material 49 CFR reference ------------------------------------------------------------------------ American Biological Safety Association 1202 ........................... Allanson Road, Mundelein, IL 60060: Risk Group Classification for 173.134. Infectious Agents, 1998. American Institute of Chemical Engineers ........................... (AIChE), 3 Park Avenue New York, NY 10016- 5991: Process Safety Progress Journal, Vol. Note to Sec. 173. 21, No. 2, Example of a Test Method 225(h)(3)(vi). for Venting Sizing: OPPSD/SPI Methodology. American Society for Testing and Materials, ........................... 100 Barr Harbor Drive, West Conshohocken, PA 19428 (Noncurrent ASTM Standards are available from: Engineering Societies Library, 354 East 47th Street, New York, NY 10017): ASTM E 380-89 Standards for Metric 171.10 Practice. Association of American Railroads, American ........................... Railroads Building, 50 F Street, NW., Washington, DC 20001: AAR Catalog Nos. SE60CHT; SE60CC; 179.14 SE60CHTE; SE60CE; SE60DC; SE60DE. AAR Catalog Nos. SE67CC; SE67CE; 179.14 SE67BHT; SE67BC; SE67BHTE; SE67BE. AAR Catalog Nos. SE68BHT; SE68BC; 179.14 SE68BHTE; SE68BE. AAR Catalog Nos. SE69AHTE; SE69AE...... 179.14 AAR Catalog Nos. SF70CHT; SF70CC; 179.14 SF70CHTE; SF70CE. AAR Catalog Nos. SF73AC; SF73AE; 179.14 SF73AHT; SF73AHTE. AAR Catalog Nos. SF79CHT; SF79CC; 179.14 SF79CHTE; SF79CE. Bureau of Explosives, Hazardous Materials ........................... Systems (BOE), Association of American Railroads, American Railroads Building, 50 F Street NW., Washington, DC 20001: Fetterley's Formula (The Determination 173.315 of the Relief Dimensions for Safety Valves on Containers in which Liquefied gas is charged and when the exterior surface of the container is exposed to a temperature of 1,200 [deg]F.). Intermodal Loading Guide for Products 174.55; 174.101; 174.112; in Closed Trailers and Containers, 174.115. issued June 2001. Pamphlet 6, Illustrating Methods for 174.55; 174.101; 174.112; Loading and Bracing Carload and Less- 174.115; 174.290. Than-Carload Shipments of Explosives and Other Dangerous Articles, 1962. Pamphlet 6A (includes appendix No. 1, 174.101; 174.290 October 1944 and appendix 2, December 1945), Illus#

Passage 148trating Methods for Loading and Bracing Carload and Less- Than-Carload Shipments of Loaded Projectiles, Loaded Bombs, etc., 1943. Pamphlet 6C, Illustrating Methods for 174.55; 174.63; 174.101; Loading and Bracing Trailers and Less- 174.112; 174.115 Than-Trailer Shipments of Explosives and Other Dangerous Articles Via Trailer-on-Flatcar (TOFC) or Container- on-Flatcar (COFC), 1985. Emergency Handling of Hazardous 171.7 Materials in Surface Transportation, 1989. Centers for Disease Control and Prevention ........................... 1600 Clifton Road, Atlanta, GA 30333: Biosafety in Microbiological and 173.134 Biomedical Laboratories, Fourth Edition, April 1999. Compressed Gas Association, Inc., 4221 ........................... Walney Road, 5th Floor, Chantilly, Virginia 20151: CGA C-1.1, Personnel Training and 180.209 Certification Guidelines for Cylinder Requalification By the Volumetric Expansion Method, 2004, First Edition. National Institutes of Health Bethesda, MD ........................... 20892: NIH Guidelines for Research Involving 173.134 Recombinant DNA Molecules (NIH Guidelines), January 2001, Appendix B. Pantone Incorporated 590 Commerce ........................... Boulevard, Carlstadt, New Jersey 07072- 3098: Pantone [supreg]Formula guide coated/ 172.407, 172.519 uncoated, Second Edition 2004. Society of Plastics Industries, Inc., ........................... Organic Peroxide Producers Safety Division, 1275 K Street NW., Suite 400, Washington, DC 20005: Self Accelerating Decomposition 173.21 Temperature Test, 1972. Truck Trailer Manufacturers Association, ........................... 1020 Princess Street, Alexandria, Virginia 22314, telephone (703) 549-3010, http://www.ttmanet.org: TTMA RP No. 96-01, TTMA RP No. 96-01, 178.345-3 Structural Integrity of DOT 406, DOT 407, and DOT 412 Cylindrical Cargo Tanks, January 2001 Edition. ------------------------------------------------------------------------ 0 3. In Sec. 171.8, the definition of ``Flexible bulk container'' is added in alphabetical order to read as follows: Sec. 171.8 Definitions and abbreviations. * * * * * Flexible bulk container means a flexible container with a capacity not exceeding 15 cubic meters and includes liners and attached handling devices and service equipment. * * * * *#

Passage 149PART 172--HAZARDOUS MATERIALS TABLE, SPECIAL PROVISIONS, HAZARDOUS MATERIALS COMMUNICATIONS, EMERGENCY RESPONSE INFORMATION, AND TRAINING REQUIREMENTS 0 4. The authority citation for part 172 continues to read as follows: Authority: 49 U.S.C. 5101-5128; 44701; 49 CFR 1.53. 0 5. In Sec. 172.101: 0 a. Paragraph (c)(10)(i) introductory text is revised; 0 b. The first sentence in paragraph (c)(10)(iii) is revised; 0 c. Paragraph (k) is revised; and 0 d. The Hazardous Materials Table is amended by removing the entries under ``[REMOVE]'', by adding the entries under ``[ADD]'', and revising entries under ``[REVISE]'' in the appropriate alphabetical sequence. The revisions and additions read as follows: Sec. 172.101 Purpose and use of hazardous materials table.#

Passage 150(10) Mixtures and solutions. (i) A mixture or solution meeting the definition of one or more hazard class that is not identified specifically by name, comprised of a single predominant hazardous material identified in the Table by technical name and one or more hazardous and/or non-hazardous material, must be described using the proper shipping name of the hazardous material and the qualifying word ``mixture'' or ``solution'', as appropriate, unless-- * * * * * (iii) A mixture or solution meeting the definition of one or more hazard class that is not identified in the Table specifically by name, comprised of two or more hazardous materials in the same hazard class, must be described using an appropriate shipping description (e.g., ``Flammable liquid, n.o.s.''). * * * * * * * * (k) Column 10: Vessel stowage requirements. Column 10A [Vessel stowage] specifies the authorized stowage locations on board cargo and passenger vessels. Column 10B [Other provisions] specifies codes for stowage requirements for specific hazardous materials. Hazardous materials offered for transportation as limited quantities are allocated stowage category A and are not subject to the stowage codes assigned by column 10B. The meaning of each code in Column 10B is set forth in Sec. 176.84 of this subchapter. Section 176.63 of this subchapter sets forth the physical requirements for each of the authorized locations listed in Column 10A. (For bulk transportation by vessel, see 46 CFR parts 30 to 40, 70, 98, 148, 151, 153 and 154.) The authorized stowage locations specified in Column 10A are defined as follows: (1) Stowage category ``A'' means the material may be stowed ``on deck'' or ``under deck'' on a cargo vessel or on a passenger vessel. (2) Stowage category ``B'' means-- (i) The material may be stowed ``on deck'' or ``under deck'' on a cargo vessel and on a passenger vessel carrying a number of passengers limited to not more than the larger of 25 passengers, or one passenger per each 3 m of overall vessel length; and (ii) ``On deck only'' on passenger vessels in which the number of passengers specified in paragraph (k)(2)(i) of this section is exceeded. (3) Stowage category ``C'' means the material must be stowed ``on deck only'' on a cargo vessel or on a passenger vessel. (4) Stowage category ``D'' means the material must be stowed ``on deck only'' on a cargo vessel or on a passenger#

Passage 151vessel carrying a number of passengers limited to not more than the larger of 25 passengers or one passenger per each 3 m of overall vessel length, but the material is prohibited on a passenger vessel in which the limiting number of passengers is exceeded. (5) Stowage category ``E'' means the material may be stowed ``on deck'' or ``under deck'' on a cargo vessel or on a passenger vessel carrying a number of passengers limited to not more than the larger of 25 passengers, or one passenger per each 3 m of overall vessel length, but is prohibited from carriage on a passenger vessel in which the limiting number of passengers is exceeded. (6) Stowage category ``01'' means the material may be stowed ``on deck'' in closed cargo transport units or ``under deck'' on a cargo vessel (up to 12 passengers) or on a passenger vessel. (7) Stowage category ``02'' means the material may be stowed ``on deck'' in closed cargo transport units or ``under deck'' on a cargo vessel (up to 12 passengers) or ``on deck'' in closed cargo transport units or ``under deck'' in closed cargo transport units on a passenger vessel. (8) Stowage category ``03'' means the material may be stowed ``on deck'' in closed cargo transport units or ``under deck'' on a cargo vessel (up to 12 passengers) but the material is prohibited on a passenger vessel. (9) Stowage category ``04'' means the material may be stowed ``on deck'' in closed cargo transport units or ``under deck'' in closed cargo transports on a cargo vessel (up to 12 passengers) but the material is prohibited on a passenger vessel. (10) Stowage category ``05'' means the material may be stowed ``on deck'' in closed cargo transport units on a cargo vessel (up to 12 passengers) but the material is prohibited on a passenger vessel. * * * * *#

Passage 152---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- (8) (9) (10) Hazardous --------------------------------------------------------------------------------------------------------------- materials Hazard Special Packaging (Sec. 173.***) Quantity limitations (see Sec. Vessel stowage Symbols descriptions and class or Identification PG Label codes provisions (Sec. ------------------------------------------------ Sec. 173.27 and 175.75) ------------------------------- proper shipping division Nos. 172.102) -------------------------------- names Exceptions Non-bulk Bulk Passenger Cargo aircraft Location Other aircraft/rail only (1) (2)............... (3) (4).............. (5)........... (6)........... (7).............. (8A).......... (8B).......... (8C).......... (9A).......... (9B).......... (10A)......... (10B) ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- [REMOVE]#

Passage 153* * * * * * * Aerosols, poison, 2.2 UN1950........... .............. 2.2, 6.1...... ................. 306........... None.......... None.......... Forbidden..... Forbidden..... A............. 48, 87, 126 Packing Group III (each not exceeding 1 L capacity). Aerosols, 2.1 UN1950........... .............. 2.1........... N82.............. 306........... None.......... None.......... 75 kg......... 150 kg........ A............. 48, 87, 126 flammable, (each not exceeding 1 L capacity). Aerosols, 2.1 UN1950........... .............. 2.1........... N82.............. 306........... 304........... None.......... Forbidden..... 150 kg........ A............. 48, 87, 126 flammable, n.o.s. (engine starting fluid) (each not exceeding 1 L capacity). Aerosols, non- 2.2 UN1950........... .............. 2.2........... ................. 306........... None.......... None.......... 75 kg......... 150 kg........ A............. 48, 87, 126 flammable, (each not exceeding 1 L capacity). Aerosols, poison, 2.2 UN1950........... .............. 2.2, 6.1...... ................. 306........... None.......... None.......... Forbidden..... Forbidden..... A............. 48, 87, 126 (each not exceeding 1 L capacity). * * * * * * * Amyl chlorides.... 3 UN1107........... II............ 3............. IB2, T4, TP1..... 150........... 202........... 242........... 5 L........... 60 L.......... B * * * * * * * Amyl mercaptans... 3 UN1111........... II............ 3............. A3, A6, IB2, T4, None.......... 202........... 242........... 5 L........... 60 L.......... B............. 95, 102 TP1. * * * * * * * Amyl nitrites..... 3 UN1113........... II............ 3............. IB2, T4, TP1..... 150........... 202........... 242........... 5 L........... 60 L.......... E............. 40 * * * * * * * Butyl mercaptans.. 3 UN2347........... II............ 3............. A3, A6, IB2, T4, 150........... 202........... 242........... 5 L........... 60 L.......... D............. 52, 95 TP1. * * * * * * * Cartridges for 1.4S UN0014........... II............ None.......... ................. 63............ 62............ None.......... 25 kg......... 100 kg weapons, blank or Cartridges, small arms, blank.#

Passage 154* * * * * * * Iodine 8 UN1792........... II............ 8............. B6, IB8, IP2, None.......... 212........... 240........... Forbidden..... 50 kg......... D............. 40, 66, 74, monochloride. IP4, N41, T7, 89, 90 TP2. * * * * * * * A Mercury contained 8 UN2809........... III........... 8............. ................. None.......... 164........... None.......... No limit...... No limit...... B............. 40, 97 in manufactured articles. * * * * * * * G Nitriles, toxic, 6.1 UN3276........... I............. 6.1........... 5, T14, TP2, None.......... 201........... 243........... 1 L........... 30 L.......... B............. 52 liquid, n.o.s.. TP13, TP27. II............ 6.1........... IB2, T11, TP2, 153........... 202........... 243........... 5 L........... 60 L.......... B............. 52 TP27. III........... 6.1........... IB3, T7, TP1, 153........... 203........... 241........... 60 L.......... 220 L......... A............. 52 TP28. * * * * * * * G Nitriles, toxic, 6.1 UN3439........... I............. 6.1........... IB7, IP1, T6, None.......... 211........... 242........... 5 kg.......... 50 kg......... D............. 52 solid, n.o.s. TP33. II............ 6.1........... IB8, IP2, IP4, 153........... 212........... 242........... 25 kg......... 100 kg........ B............. 52 T3, TP33. III........... 6.1........... IB8, IP3, T1, 153........... 213........... 240........... 100 kg........ 200 kg........ A............. 52 TP33. * * * * * * * G Organophosphorus 6.1 UN3278........... I............. 6.1........... 5, T14, TP2, None.......... 201........... 243........... 1 L........... 30 L.......... B compound, toxic, TP13, TP27. liquid, n.o.s. II............ 6.1........... IB2, T11, TP2, 153........... 202........... 243........... 5 L........... 60 L.......... B TP27. III........... 6.1........... IB3, T7, TP1, 153........... 203........... 241........... 60 L.......... 220 L......... A TP28. G Organophosphorus 6.1 UN3464........... I............. 6.1........... IB7, IP1, T6, None.......... 211........... 242........... 5 kg.......... 50 kg......... B compound, toxic, TP33. solid, n.o.s. II............ 6.1........... IB8, IP2, IP4, 153........... 212........... 242........... 25 kg......... 100 kg........ B T3, TP33. III........... 6.1........... IB8, IP3, T1, 153........... 213........... 240........... 100 kg........ 200 kg........ A TP33.#

Passage 155* * * * * * * G Organometallic 6.1 UN3282........... I............. 6.1........... T14, TP2, TP13, None.......... 201........... 242........... 1 L........... 30 L.......... B compound, toxic, TP27. liquid, n.o.s. II............ 6.1........... IB2, T11, TP2, 153........... 202........... 242........... 5 L........... 60 L.......... B TP27. III........... 6.1........... IB3, T7, TP1, 153........... 203........... 241........... 60 L.......... 220 L......... A TP28. G Organometallic 6.1 UN3467........... I............. 6.1........... IB7, IP1, T6, None.......... 211........... 242........... 5 kg.......... 50 kg......... B compound, toxic, TP33. solid, n.o.s. II............ 6.1........... IB8, IP2, IP4, 153........... 212........... 242........... 25 kg......... 100 kg........ B T3, TP33. III........... 6.1........... IB8, IP3, T1, 153........... 213........... 240........... 100 kg........ 200 kg........ A TP33. * * * * * * * G Toxic by 6.1 UN3492........... I............. 6.1, 8, 3..... 1, B9, B14, B30, None.......... 226........... 244........... Forbidden..... Forbidden..... D............. 40, 125 inhalation B72, T22, TP2, liquid, TP13, TP27, corrosive, TP38, TP44. flammable, n.o.s. with an inhalation toxicity lower than or equal to 200 ml/m\3\ and saturated vapor concentration greater than or equal to 500 LC50.#

Passage 156G Toxic by 6.1 UN3493........... I............. 6.1, 8, 3..... 2, B9, B14, B32, None.......... 227........... 244........... Forbidden..... Forbidden..... D............. 40, 125 inhalation B74, T20, TP2, liquid, TP13, TP27, corrosive, TP38, TP45. flammable, n.o.s. with an inhalation toxicity lower than or equal to 1000 ml/m\3\ and saturated vapor concentration greater than or equal to 10 LC50. G Toxic by 6.1 UN3488........... I............. 6.1, 3, 8..... 1, B9, B14, B30, None.......... 226........... 244........... Forbidden..... Forbidden..... D............. 40, 125 inhalation B72, T22, TP2, liquid, TP13, TP27, flammable, TP38, TP44. corrosive, n.o.s. with an inhalation toxicity lower than or equal to 200 ml/m\3\ and saturated vapor concentration greater than or equal to 500 LC50. G Toxic by 6.1 UN3489........... I............. 6.1, 3, 8..... 2, B9, B14, B32, None.......... 227........... 244........... Forbidden..... Forbidden..... D............. 40, 125 inhalation B74, T20, TP2, liquid, TP13, TP27, flammable, TP38, TP45. corrosive, n.o.s. with an inhalation toxicity lower than or equal to 1000 ml/m\3\ and saturated vapor concentration greater than or equal to 10 LC50. G Toxic by 6.1 UN3381........... I............. 6.1........... 1, B9, B14, B30, None.......... 226........... 244........... Forbidden..... Forbidden..... D............. 40 inhalation T22, TP2, TP13, liquid, n.o.s. TP27, TP38, TP44. with an inhalation toxicity lower than or equal to 200 ml/m\3\ and saturated vapor concentration greater than or equal to 500 LC50. G Toxic by 6.1 UN3382........... I............. 6.1........... 2, B9, B14, B32, None.......... 227........... 244........... Forbidden..... Forbidden..... D............. 40 inhalation T20, TP2, TP13, liquid, n.o.s. TP27, TP38, TP45. with an inhalation toxicity lower than or equal to 1000 ml/m\3\ and saturated vapor concentration greater than or equal to 10 LC50. G Toxic by 6.1 UN3383........... I............. 6.1, 3........ 1, B9, B14, B30, None.......... 226........... 244........... Forbidden..... Forbidden..... D............. 40 inhalation T22, TP2, TP13, liquid, TP27, TP38, TP44. flammable, n.o.s. with an inhalation toxicity lower than or equal to 200 ml/m\3\ and saturated vapor concentration greater than or equal to 500 LC50. G Toxic by 6.1 UN3384........... I............. 6.1, 3........ 2, B9, B14, B32, None.......... 227.....#

Passage 157...... 244........... Forbidden..... Forbidden..... D............. 40 inhalation T20, TP2, TP13, liquid, TP27, TP38, TP45. flammable, n.o.s. with an inhalation toxicity lower than or equal to 1000 ml/m\3\ and saturated vapor concentration greater than or equal to 10 LC50.#

Passage 158G Toxic by 6.1 UN3385........... I............. 6.1, 4.3...... 1, B9, B14, B30, None.......... 226........... 244........... Forbidden..... Forbidden..... D............. 40 inhalation T22, TP2, TP13, liquid, water- TP38, TP44. reactive, n.o.s. with an inhalation toxicity lower than or equal to 200 ml/m\3\ and saturated vapor concentration greater than or equal to 500 LC50. G Toxic by 6.1 UN3386........... I............. 6.1, 4.3...... 2, B9, B14, B32, None.......... 227........... 244........... Forbidden..... Forbidden..... D............. 40 inhalation T20, TP2, TP13, liquid, water- TP38, TP44. reactive, n.o.s. with an inhalation toxicity lower than or equal to 1000 ml/m\3\ and saturated vapor concentration greater than or equal to 10 LC50. G Toxic by 6.1 UN3490........... I............. 6.1, 4.3, 3... 1, B9, B14, B30, None.......... 226........... 244........... Forbidden..... Forbidden..... D............. 21, 28, 40, 49 inhalation B72, T22, TP2, liquid, water- TP13, TP27, reactive, TP38, TP44. flammable, n.o.s. with an inhalation toxicity lower than or equal to 200 ml/m\3\ and saturated vapor concentration greater than or equal to 500 LC50. G Toxic by 6.1 UN3491........... I............. 6.1, 4.3, 3... 2, B9, B14, B32, None.......... 227........... 244........... Forbidden..... Forbidden..... D............. 21, 28, 40, 49 inhalation B74, T20, TP2, liquid, water- TP13, TP27, reactive, TP38, TP45. flammable, n.o.s. with an inhalation toxicity lower than or equal to 1000 ml/m\3\ and saturated vapor concentration greater than or equal to 10 LC50. G Toxic by 6.1 UN3387........... I............. 6.1, 5.1...... 1, B9, B14, B30, None.......... 226........... 244........... Forbidden..... Forbidden..... D............. 40 inhalation T22, TP2, TP13, liquid, TP38, TP44. oxidizing, n.o.s. with an inhalation toxicity lower than or equal to 200 ml/m\3\ and saturated vapor concentration greater than or equal to 500 LC50. G Toxic by 6.1 UN3388........... I............. 6.1, 5.1...... 2, B9, B14, B32, None.......... 227........... 244........... Forbidden..... Forbidden..... D............. 40 inhalation T20, TP2, TP13, liquid, TP38, TP44. oxidizing, n.o.s. with an inhalation toxicity lower than or equal to 1000 ml/m\3\ and saturated vapor concentration greater than or equal to 10 LC50.#

Passage 159G Toxic by 6.1 UN3389........... I............. 6.1, 8........ 1, B9, B14, B30, None.......... 226........... 244........... Forbidden..... Forbidden..... D............. 40 inhalation T22, TP2, TP13, liquid, TP27, TP38, TP44. corrosive, n.o.s. with an inhalation toxicity lower than or equal to 200 ml/m\3\ and saturated vapor concentration greater than or equal to 500 LC50. G Toxic by 6.1 UN3390........... I............. 6.1, 8........ 2, B9, B14, B32, None.......... 227........... 244........... Forbidden..... Forbidden..... D............. 40 inhalation T20, TP2, TP13, liquid, TP27, TP38, TP45. corrosive, n.o.s. with an inhalation toxicity lower than or equal to 1000 ml/m\3\ and saturated vapor concentration greater than or equal to 10 LC50. * * * * * * * Vinyltrichlorosila 3 UN1305........... II............ 3, 8.......... A3, A7, B6, N34, None.......... 206........... 243........... 1 L........... 5 L........... B............. 40 ne, stabilized. T10, TP2, TP7, TP13. * * * * * * * Aerosols, 2.2 UN1950........... .............. 2.2, 8........ A34.............. 306........... None.......... None.......... 75 kg......... 150 kg........ A............. 25, 87, 126 corrosive, Packing Group II or III, (each not exceeding 1 L capacity). Aerosols, 2.1 UN1950........... .............. 2.1........... N82.............. 306........... None.......... None.......... 75 kg......... 150 kg........ A............. 25, 87, 126 flammable, (each not exceeding 1 L capacity). Aerosols, 2.1 UN1950........... .............. 2.1........... N82.............. 306........... 304........... None.......... Forbidden..... 150 kg........ A............. 25, 87, 126 flammable, n.o.s. (engine starting fluid) (each not exceeding 1 L capacity). Aerosols, non- 2.2 UN1950........... .............. 2.2........... ................. 306........... None.......... None.......... 75 kg......... 150 kg........ A............. 25, 87, 126 flammable, (each not exceeding 1 L capacity). Aerosols, poison, 2.2 UN1950........... .............. 2.2, 6.1...... ................. 306........... None.......... None.......... Forbidden..... Forbidden..... A............. 25, 87, 126 Packing Group III (each not exceeding 1 L capacity). * * * * * * * Amyl chloride..... 3 UN1107........... II............ 3............. IB2, T4, TP1..... 150........... 202........... 242........... 5 L........... 60 L.......... B#

Passage 160* * * * * * * Amyl mercaptan.... 3 UN1111........... II............ 3............. A3, A6, IB2, T4, None.......... 202........... 242........... 5 L........... 60 L.......... B............. 95, 102 TP1. * * * * * * * Amyl nitrite...... 3 UN1113........... II............ 3............. IB2, T4, TP1..... 150........... 202........... 242........... 5 L........... 60 L.......... E............. 40 * * * * * * * Butyl mercaptan... 3 UN2347........... II............ 3............. A3, A6, IB2, T4, 150........... 202........... 242........... 5 L........... 60 L.......... D............. 52, 95 TP1. * * * * * * * Capacitor, 9 UN3499........... .............. 9............. 361.............. 176........... 176........... 176........... No limit...... No limit...... A electric double layer (with an energy storage capacity greater than 0.3 Wh). Cartridges for 1.4S UN0014........... II............ 1.4S.......... ................. 63............ 62............ None.......... 25 kg......... 100 kg........ 01............ 25 weapons, blank or Cartridges, small arms, blank or Cartridges for tools, blank. * * * * * * * G Chemical under 2.2 UN3503........... .............. 2.2, 8........ 362, T50, TP40... None.......... 335........... 313........... Forbidden..... 100 kg........ D............. 40 pressure, corrosive, n.o.s. G Chemical under 2.1 UN3505........... .............. 2.1, 8........ 362, T50, TP40... None.......... 335........... 313........... Forbidden..... 75 kg......... D............. 40 pressure, flammable, corrosive, n.o.s. G Chemical under 2.1 UN3501........... .............. 2.1........... 362, T50, TP40... None.......... 335........... 313........... Forbidden..... 75 kg......... D............. 40 pressure, flammable, n.o.s. G Chemical under 2.1 UN3504........... .............. 2.1, 6.1...... 362, T50, TP40... None.......... 335........... 313........... Forbidden..... 75 kg......... D............. 40 pressure, flammable, toxic, n.o.s. G Chemical under 2.2 UN3500........... .............. 2.2........... 362, T50, TP40... None.......... 335........... 313........... 75 kg......... 150 kg........ B pressure, n.o.s. G Chemical under 2.2 UN3502........... .............. 2.2, 6.1...... 362, T50, TP40... None.......... 335........... 313........... Forbidden..... 100 kg........ D............. 40 pressure, toxic, n.o.s.#

Passage 161* * * * * * * Iodine 8 UN3498........... II............ 8............. IB2, T7, TP2..... 154........... 202........... 242........... 1 L........... 30 L.......... D............. 40, 66, 74, monochloride, 89, 90 liquid. Iodine 8 UN1792........... II............ 8............. B6, IB8, IP2, None.......... 212........... 240........... Forbidden..... 50 kg......... D............. 40, 66, 74, monochloride, IP4, N41, T7, 89, 90 solid. TP2. * * * * * * * Krill meal........ 4.2 UN3497........... II............ 4.2........... 155, IB6, IP2, None.......... 212........... 242........... No limit...... No limit...... B............. 25, 88, 128 T3, TP33. III........... 4.2........... 155, IB8, IP3, None.......... 213........... 242........... No limit...... No limit...... A............. 128 T1, TP33. * * * * * * * A W Mercury contained 8 UN3506........... III........... 8, 6.1........ A191............. 164........... None.......... None.......... No limit...... No limit...... B............. 40, 97 in manufactured articles. * * * * * * * G Nitriles, liquid, 6.1 UN3276........... I............. 6.1........... 5, T14, TP2, None.......... 201........... 243........... 1 L........... 30 L.......... B............. 52 toxic, n.o.s. TP13, TP27. II............ 6.1........... IB2, T11, TP2, 153........... 202........... 243........... 5 L........... 60 L.......... B............. 52 TP27. III........... 6.1........... IB3, T7, TP1, 153........... 203........... 241........... 60 L.......... 220 L......... A............. 52 TP28. G Nitriles, solid, 6.1 UN3439........... I............. 6.1........... IB7, IP1, T6, None.......... 211........... 242........... 5 kg.......... 50 kg......... D............. 52 toxic, n.o.s.. TP33. II............ 6.1........... IB8, IP2, IP4, 153........... 212........... 242........... 25 kg......... 100 kg........ B............. 52 T3, TP33. III........... 6.1........... IB8, IP3, T1, 153........... 213........... 240........... 100 kg........ 200 kg........ A............. 52 TP33.#

Passage 162* * * * * * * G Organometallic 6.1 UN3282........... I............. 6.1........... T14, TP2, TP13, None.......... 201........... 242........... 1 L........... 30 L.......... B compound, liquid, TP27. toxic, n.o.s. II............ 6.1........... IB2, T11, TP2, 153........... 202........... 242........... 5 L........... 60 L.......... B TP27. III........... 6.1........... IB3, T7, TP1, 153........... 203........... 241........... 60 L.......... 220 L......... A TP28. G Organometallic 6.1 UN3467........... I............. 6.1........... IB7, IP1, T6, None.......... 211........... 242........... 5 kg.......... 50 kg......... B compound, solid, TP33. toxic, n.o.s. II............ 6.1........... IB8, IP2, IP4, 153........... 212........... 242........... 25 kg......... 100 kg........ B T3, TP33. III........... 6.1........... IB8, IP3, T1, 153........... 213........... 240........... 100 kg........ 200 kg........ A TP33. * * * * * * * G Organophosphorus 6.1 UN3278........... I............. 6.1........... 5, T14, TP2, None.......... 201........... 243........... 1 L........... 30 L.......... B compound, liquid, TP13, TP27. toxic, n.o.s. II............ 6.1........... IB2, T11, TP2, 153........... 202........... 243........... 5 L........... 60 L.......... B TP27. III........... 6.1........... IB3, T7, TP1, 153........... 203........... 241........... 60 L.......... 220 L......... A TP28. * * * * * * * G Organophosphorus 6.1 UN3464........... I............. 6.1........... IB7, IP1, T6, None.......... 211........... 242........... 5 kg.......... 50 kg......... B compound, solid, TP33. toxic, n.o.s. II............ 6.1........... IB8, IP2, IP4, 153........... 212........... 242........... 25 kg......... 100 kg........ B T3, TP33. III........... 6.1........... IB8, IP3, T1, 153........... 213........... 240........... 100 kg........ 200 kg........ A TP33.#

Passage 163* * * * * * * G Toxic by 6.1 UN3488........... I............. 6.1, 3, 8..... 1, B9, B14, B30, None.......... 226........... 244........... Forbidden..... Forbidden..... D............. 40, 125 inhalation B72, T22, TP2, liquid, TP13, TP27, flammable, TP38, TP44. corrosive, n.o.s. with an LC50 lower than or equal to 200 ml/ m\3\ and saturated vapor concentration greater than or equal to 500 LC50. G Toxic by 6.1 UN3489........... I............. 6.1, 3, 8..... 2, B9, B14, B32, None.......... 227........... 244........... Forbidden..... Forbidden..... D............. 40, 125 inhalation B74, T20, TP2, liquid, TP13, TP27, flammable, TP38, TP45. corrosive, n.o.s. with an LC50 lower than or equal to 1000 ml/ m\3\ and saturated vapor concentration greater than or equal to 10 LC50. G Toxic by 6.1 UN3381........... I............. 6.1........... 1, B9, B14, B30, None.......... 226........... 244........... Forbidden..... Forbidden..... D............. 40 inhalation T22, TP2, TP13, liquid, n.o.s. TP27, TP38, TP44. with an LC50 lower than or equal to 200 ml/ m\3\ and saturated vapor concentration greater than or equal to 500 LC50. G Toxic by 6.1 UN3382........... I............. 6.1........... 2, B9, B14, B32, None.......... 227........... 244........... Forbidden..... Forbidden..... D............. 40 inhalation T20, TP2, TP13, liquid, n.o.s. TP27, TP38, TP45. with an LC50 lower than or equal to 1000 ml/ m\3\ and saturated vapor concentration greater than or equal to 10 LC50.#

Passage 164G Toxic by 6.1 UN3383........... I............. 6.1, 3........ 1, B9, B14, B30, None.......... 226........... 244........... Forbidden..... Forbidden..... D............. 40 inhalation T22, TP2, TP13, liquid, TP27, TP38, TP44. flammable, n.o.s. with an LC50 lower than or equal to 200 ml/ m\3\ and saturated vapor concentration greater than or equal to 500 LC50. G Toxic by 6.1 UN3384........... I............. 6.1, 3........ 2, B9, B14, B32, None.......... 227........... 244........... Forbidden..... Forbidden..... D............. 40 inhalation T20, TP2, TP13, liquid, TP27, TP38, TP45. flammable, n.o.s. with an LC50 lower than or equal to 1000 ml/ m\3\ and saturated vapor concentration greater than or equal to 10 LC50. G Toxic by 6.1 UN3385........... I............. 6.1, 4.3...... 1, B9, B14, B30, None.......... 226........... 244........... Forbidden..... Forbidden..... D............. 40 inhalation T22, TP2, TP13, liquid, water- TP38, TP44. reactive, n.o.s. with an LC50 lower than or equal to 200 ml/ m\3\ and saturated vapor concentration greater than or equal to 500 LC50. G Toxic by 6.1 UN3386........... I............. 6.1, 4.3...... 2, B9, B14, B32, None.......... 227........... 244........... Forbidden..... Forbidden..... D............. 40 inhalation T20, TP2, TP13, liquid, water- TP38, TP44. reactive, n.o.s. with an LC50 lower than or equal to 1000 ml/ m\3\ and saturated vapor concentration greater than or equal to 10 LC50. G Toxic by 6.1 UN3490........... I............. 6.1, 4.3, 3... 1, B9, B14, B30, None.......... 226........... 244........... Forbidden..... Forbidden..... D............. 21, 28, 40, 49 inhalation B72, T22, TP2, liquid, water- TP13, TP27, reactive, TP38, TP44. flammable, n.o.s. with an LC50 lower than or equal to 200 ml/ m\3\ and saturated vapor concentration greater than or equal to 500 LC50. G Toxic by 6.1 UN3491........... I............. 6.1, 4.3, 3... 2, B9, B14, B32, None.......... 227........... 244........... Forbidden..... Forbidden..... D............. 21, 28, 40, 49 inhalation B74, T20, TP2, liquid, water- TP13, TP27, reactive, TP38, TP45. flammable, n.o.s. with an LC50 lower or equal to 1000 ml/m\3\ and saturated vapor concentration greater than or equal to 10 LC50. G Toxic by 6.1 UN3387........... I............. 6.1, 5.1...... 1, B9, B14, B30, None.......... 226........... 244........... Forbidden..... Forbidden..... D..........#

Passage 165... 40 inhalation T22, TP2, TP13, liquid, TP38, TP44. oxidizing, n.o.s. with an LC50 lower than or equal to 200 ml/ m\3\ and saturated vapor concentration greater than or equal to 500 LC50. G Toxic by 6.1 UN3388........... I............. 6.1, 5.1...... 2, B9, B14, B32, None.......... 227........... 244........... Forbidden..... Forbidden..... D............. 40 inhalation T20, TP2, TP13, liquid, TP38, TP44. oxidizing, n.o.s. with an LC50 lower than or equal to 1000 ml/ m\3\ and saturated vapor concentration greater than or equal to 10 LC50. G Toxic by 6.1 UN3389........... I............. 6.1, 8........ 1, B9, B14, B30, None.......... 226........... 244........... Forbidden..... Forbidden..... D............. 40 inhalation T22, TP2, TP13, liquid, TP27, TP38, TP44. corrosive, n.o.s. with an LC50 lower than or equal to 200 ml/ m\3\ and saturated vapor concentration greater than or equal to 500 LC50. G Toxic by 6.1 UN3390........... I............. 6.1, 8........ 2, B9, B14, B32, None.......... 227........... 244........... Forbidden..... Forbidden..... D............. 40 inhalation T20, TP2, TP13, liquid, TP27, TP38, TP45. corrosive, n.o.s. with an LC50 lower than or equal to 1000 ml/ m\3\ and saturated vapor concentration greater than or equal to 10 LC50. * * * * * * * Vinyltrichlorosila 3 UN1305........... II............ 3, 8.......... A3, A7, B6, N34, None.......... 206........... 243........... Forbidden..... 5 L........... B............. 40 ne. T10, TP2, TP7, TP13. * * * * * * * I Air bag inflators, 1.4G UN0503........... II............ 1.4G.......... 161, A200........ None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 or Air bag modules, or Seat- belt pretensioners. Air bag inflators, 9 UN3268........... III........... 9............. 160, A200........ 166........... 166........... 166........... 25 kg......... 100 kg........ A or Air bag modules, or Seat- belt pretensioners.#

Passage 166* * * * * * * Ammonium nitrate 5.1 UN2067........... III........... 5.1........... 52, 150, B120, 152........... 213........... 240........... 25 kg......... 100 kg........ B............. 25, 59, 60, based fertilizer. IB8, IP3, T1, 66, 117 TP33. Ammonium nitrate 5.1 UN3375........... II............ 5.1........... 147, 163......... None.......... 214........... 214........... Forbidden..... Forbidden..... D............. 25, 59, 60, emulsion or 66, 124 Ammonium nitrate suspension or Ammonium nitrate gel, intermediate for blasting explosives. * * * * * * * D Ammonium nitrate- 1.5D NA0331........... II............ 1.5D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25, 19E fuel oil mixture containing only prilled ammonium nitrate and fuel oil. * * * * * * * Ammonium nitrate, 1.1D UN0222........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 19E with more than 0.2 percent combustible substances, including any organic substance calculated as carbon, to the exclusion of any other added substance. Ammonium nitrate, 5.1 UN1942........... III........... 5.1........... A1, A29, B120, 152........... 213........... 240........... 25 kg......... 100 kg........ A............. 25, 59, 60, with not more IB8, IP3, T1, 116 than 0.2% total TP33. combustible material, including any organic substance, calculated as carbon to the exclusion of any other added substance. * * * * * * * Ammonium 1.1D UN0402........... II............ 1.1D.......... 107.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 19E perchlorate. * * * * * * * Ammonium picrate, 1.1D UN0004........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 5E, 19E dry or wetted with less than 10 percent water, by mass.#

Passage 167* * * * * * * Ammunition, 1.2G UN0171........... II............ 1.2G.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25 illuminating with or without burster, expelling charge or propelling charge. Ammunition, 1.3G UN0254........... II............ 1.3G.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25 illuminating with or without burster, expelling charge or propelling charge. Ammunition, 1.4G UN0297........... II............ 1.4G.......... ................. .............. 62............ 62............ Forbidden..... 75 kg......... 02............ 25 illuminating with or without burster, expelling charge or propelling charge. Ammunition, 1.3J UN0247........... II............ 1.3J.......... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 23E incendiary liquid or gel, with burster, expelling charge or propelling charge. * * * * * * * Ammunition, 1.2H UN0243........... II............ 1.2H.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 05............ 25, 14E, 15E, incendiary, white 17E phosphorus, with burster, expelling charge or propelling charge.#

Passage 168Ammunition, 1.3H UN0244........... II............ 1.3H.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 05............ 25, 14E, 15E, incendiary, white 17E phosphorus, with burster, expelling charge or propelling charge. Ammunition, 1.2G UN0009........... II............ 1.2G.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25 incendiary with or without burster, expelling charge, or propelling charge. Ammunition, 1.3G UN0010........... II............ 1.3G.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25 incendiary with or without burster, expelling charge, or propelling charge. Ammunition, 1.4G UN0300........... II............ 1.4G.......... ................. .............. 62............ 62............ Forbidden..... 75 kg......... 02............ 25 incendiary with or without burster, expelling charge or propelling charge. Ammunition, 1.4G UN0362........... II............ 1.4G.......... ................. .............. 62............ 62............ Forbidden..... 75 kg......... 02............ 25 practice. Ammunition, 1.3G UN0488........... II............ 1.3G.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25 practice. Ammunition, proof. 1.4G UN0363........... II............ 1.4G.......... ................. .............. 62............ 62............ Forbidden..... 75 kg......... 02............ 25#

Passage 169* * * * * * * Ammunition smoke, 1.2H UN0245........... II............ 1.2H.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 05............ 25, 14E, 15E, white phosphorus 17E with burster, expelling charge, or propelling charge. Ammunition, smoke, 1.3H UN0246........... II............ 1.3H.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 05............ 25, 14E, 15E, white phosphorus 17E with burster, expelling charge, or propelling charge. Ammunition, smoke 1.2G UN0015........... II............ 1.2G.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25, 17E with or without burster, expelling charge or propelling charge. Ammunition, smoke 1.3G UN0016........... II............ 1.3G.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25, 17E with or without burster, expelling charge or propelling charge. Ammunition, smoke 1.4G UN0303........... II............ 1.4G.......... ................. .............. 62............ 62............ Forbidden..... 75 kg......... 02............ 25, 14E, 15E, with or without 17E burster, expelling charge or propelling charge. * * * * * * * Ammunition, tear- 1.2G UN0018........... II............ 1.2G, 8, 6.1.. ................. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25, 17E producing with burster, expelling charge or propelling charge. Ammunition, tear- 1.3G UN0019........... II............ 1.3G, 8, 6.1.. ................. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25, 17E producing with burster, expelling charge or propelling charge. Ammunition, tear- 1.4G UN0301........... II............ 1.4G, 8, 6.1.. ................. .............. 62............ 62............ Forbidden..... 75 kg......... 02............ 25, 14E, 15E, producing with 17E burster, expelling charge or propelling charge. * * * * * * * G Ammunition, toxic 1.2K UN0020........... II............ 1.2K, 6.1..... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 14E, 15E, with burster, 17E expelling charge or propelling charge.#

Passage 170G Ammunition, toxic 1.3K UN0021........... II............ 1.3K, 6.1..... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 14E, 15E, with burster, 17E expelling charge or propelling charge.#

Passage 171* * * * * * * Articles, 1.6N UN0486........... II............ 1.6N.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25 explosive, extremely insensitive or Articles, EEI. G Articles, 1.4S UN0349........... II............ 1.4S.......... 101.............. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25 explosive, n.o.s. G Articles, 1.4B UN0350........... II............ 1.4B.......... 101.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 explosive, n.o.s. G Articles, 1.4C UN0351........... II............ 1.4C.......... 101.............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 explosive, n.o.s. G Articles, 1.4D UN0352........... II............ 1.4D.......... 101.............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 explosive, n.o.s. G Articles, 1.4G UN0353........... II............ 1.4G.......... 101.............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 explosive, n.o.s. G Articles, 1.1L UN0354........... II............ 1.1L.......... 101.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 02............ 25, 14E, 15E explosive, n.o.s. G Articles, 1.2L UN0355........... II............ 1.2L.......... 101.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 14E, 15E explosive, n.o.s. G Articles, 1.3L UN0356........... II............ 1.3L.......... 101.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 14E, 15E explosive, n.o.s. G Articles, 1.1C UN0462........... II............ 1.1C.......... 101.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 explosive, n.o.s. G Articles, 1.1D UN0463........... II............ 1.1D.......... 101.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 explosive, n.o.s. G Articles, 1.1E UN0464........... II............ 1.1E.......... 101.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 explosive, n.o.#

Passage 172s. G Articles, 1.1F UN0465........... II............ 1.1F.......... 101.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 explosive, n.o.s. G Articles, 1.2C UN0466........... II............ 1.2C.......... 101.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 explosive, n.o.s. G Articles, 1.2D UN0467........... II............ 1.2D.......... 101.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 explosive, n.o.s. G Articles, 1.2E UN0468........... II............ 1.2E.......... 101.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 explosive, n.o.s. G Articles, 1.2F UN0469........... II............ 1.2F.......... 101.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 explosive, n.o.s. G Articles, 1.3C UN0470........... II............ 1.3C.......... 101.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 explosive, n.o.s. G Articles, 1.4E UN0471........... II............ 1.4E.......... 101.............. None.......... 62............ None.......... Forbidden..... 75 kg......... 03............ 25 explosive, n.o.s. G Articles, 1.4F UN0472........... II............ 1.4F.......... 101.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 explosive, n.o.s.#

Passage 173* * * * * * * Articles, 1.2L UN0380........... II............ 1.2L.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 14E, 15E, pyrophoric. 17E Articles, 1.1G UN0428........... II............ 1.1G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25 pyrotechnic for technical purposes. Articles, 1.2G UN0429........... II............ 1.2G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25 pyrotechnic for technical purposes. Articles, 1.3G UN0430........... II............ 1.3G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25 pyrotechnic for technical purposes. Articles, 1.4G UN0431........... II............ 1.4G.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 pyrotechnic for technical purposes. Articles, 1.4S UN0432........... II............ 1.4S.......... ................. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25 pyrotechnic for technical purposes. * * * * * * * A, G Aviation regulated 9 UN3334........... .............. 9............. A35, A189........ 155........... 204........... .............. 450 L......... 450 L......... A liquid, n.o.s. A, G Aviation regulated 9 UN3335........... .............. 9............. A35.............. 155........... 204........... .............. 400 kg........ 400 kg........ A solid, n.o.s. * * * * * * * Barium azide, dry 1.1A UN0224........... II............ 1.1A, 6.1..... 111, 117......... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 or wetted with less than 50 percent water, by mass. * * * * * * * Batteries, dry, 8 UN3028........... III........... 8............. 237.............. None.......... 213........... None.......... 25 kg......... 230 kg........ A............. 52 containing potassium hydroxide solid, electric storage.#

Passage 174* * * * * * * W Batteries, nickel- 9 UN3496........... .............. 9............. 340.............. .............. .............. .............. .............. .............. A............. 25 metal hydride see Batteries, dry, sealed, n.o.s. for nickel-metal hydride batteries transported by modes other than vessel. * * * * * * * Batteries, wet, 8 UN2794........... III........... 8............. A51.............. 159........... 159........... 159........... 30 kg......... No limit...... A............. 146 filled with acid, electric storage. Batteries, wet, 8 UN2795........... III........... 8............. A51.............. 159........... 159........... 159........... 30 kg......... No limit...... A............. 52, 146 filled with alkali, electric storage. * * * * * * * Benzyldimethylamin 8 UN2619........... II............ 8, 3.......... B2, IB2, T7, TP2. 154........... 202........... 243........... 1 L........... 30 L.......... A............. 25, 40 e. * * * * * * * Black powder, 1.1D UN0028........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 compressed or Gunpowder, compressed or Black powder, in pellets or Gunpowder, in pellets. Black powder or 1.1D UN0027........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 Gunpowder, granular or as a meal. * * * * * * * Bombs, photo-flash 1.1F UN0037........... II............ 1.1F.......... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25 Bombs, photo-flash 1.1D UN0038........... II............ 1.1D.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 04............ 25 Bombs, photo-flash 1.2G UN0039........... II............ 1.2G.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25 Bombs, photo-flash 1.3G UN0299........... II............ 1.3G.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 03............ 25#

Passage 175* * * * * * * Bombs, with 1.1F UN0033........... II............ 1.1F.......... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25 bursting charge. Bombs, with 1.1D UN0034........... II............ 1.1D.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 04............ 25 bursting charge. Bombs, with 1.2D UN0035........... II............ 1.2D.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 04............ 25 bursting charge. Bombs, with 1.2F UN0291........... II............ 1.2F.......... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25 bursting charge. Bombs with 1.1J UN0399........... II............ 1.1J.......... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 23E flammable liquid, with bursting charge. Bombs with 1.2J UN0400........... II............ 1.2J.......... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 23E flammable liquid, with bursting charge. Boosters with 1.1B UN0225........... II............ 1.1B.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 detonator. Boosters with 1.2B UN0268........... II............ 1.2B.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 detonator. Boosters, without 1.1D UN0042........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 detonator. Boosters, without 1.2D UN0283........... II............ 1.2D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 detonator. * * * * * * * Boron trifluoride. 2.3 UN1008........... .............. 2.3, 8........ 2, 238, B9, B14.. None.......... 302........... 314, 315...... Forbidden..... Forbidden..... D............. 40#

Passage 176* * * * * * * Boron trifluoride 4.3 UN2965........... I............. 4.3, 8, 3..... A19, T10, TP2, None.......... 201........... 243........... Forbidden..... 1 L........... D............. 21, 28, 40, dimethyl etherate. TP7, TP13. 49, 100 * * * * * * * Bursters, 1.1D UN0043........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 explosive. * * * * * * * 5-tert-Butyl-2,4,6- 4.1 UN2956........... III........... 4.1........... 159.............. None.......... 223........... None.......... Forbidden..... Forbidden..... D............. 12, 25, 127 trinitro-m-xylene or Musk xylene.#

Passage 177* * * * * * * Calcium 5.1 UN3485........... II............ 5.1, 8........ 165, 166, A7, A9, 152........... 212........... None.......... 5 kg.......... 25 kg......... D............. 4, 25, 52, 56, hypochlorite, IB8, IP2, IP4, 58, 69, 142 dry, corrosive or IP13, N34, W9. Calcium hypochlorite mixture, dry, corrosive with more than 39% available chlorine (8.8% available oxygen). Calcium 5.1 UN1748........... II............ 5.1........... 165, 166, A7, A9, 152........... 212........... None.......... 5 kg.......... 25 kg......... D............. 4, 25, 52, 56, hypochlorite, dry IB8, IP2, IP4, 58, 69, 142 or Calcium IP13, N34, W9. hypochlorite mixture dry with more than 39% available chlorine (8.8% available oxygen). III........... 5.1........... 165, 171, A7, A9, 152........... 213........... 240........... 25 kg......... 100 kg........ D............. 4, 25, 52, 56, IB8, IP4, IP13, 58, 69, 142 N34, W9. Calcium 5.1 UN3487........... II............ 5.1, 8........ 165, IB8, IP2, 152........... 212........... 240........... 5 kg.......... 25 kg......... D............. 4, 25, 52, 56, hypochlorite, IP4, IP13, W9. 58, 69, 142 hydrated, corrosive or Calcium hypochlorite, hydrated mixture, corrosive with not less than 5.5% but not more than 16% water. III........... 5.1, 8........ 165, IB8, IP4, W9 152........... 213........... 240........... 25 kg......... 100 kg........ D............. 4, 25, 52, 56, 58, 69, 142 Calcium 5.1 UN2880........... II............ 5.1........... 165, IB8, IP2, 152........... 212........... 240........... 5 kg.......... 25 kg......... D............. 4, 25, 52, 56, hypochlorite, IP4, IP13, W9. 58, 69, 142 hydrated or Calcium hypochlorite, hydrated mixture, with not less than 5.5% but not more than 16% water. III........... 5.1........... 165, 171, IB8, 152........... 213........... 240........... 25 kg......... 100 kg........ D............. 4, 25, 52, 56, IP4, IP13, W9. 58, 69, 142 Calcium 5.1 UN3486........... III........... 5.1, 8........ 165, A1, A29, 152........... 213........... 240........... 5 kg.......... 25 kg......... D............. 4, 25, 52, 56, hypochlorite IB8, IP3, IP13, 58, 69, 142 mixture, dry, N34, W9, W10. corrosive with more than 10% but not more than 39% available chlorine.#

Passage 178* * * * * * * Calcium 5.1 UN2208........... III........... 5.1........... 165, A1, A29, 152........... 213........... 240........... 25 kg......... 100 kg........ D............. 4, 25, 52, 56, hypochlorite IB8, IP3, IP13, 58, 69, 142 mixture, dry, N34, W9, W10. with more than 10% but not more than 39% available chlorine. * * * * * * * Calcium nitrate... 5.1 UN1454........... III........... 5.1........... 34, B120, IB8, 152........... 213........... 240........... 25 kg......... 100 kg........ A IP3, T1, TP33. * * * * * * * Cartridges, flash. 1.1G UN0049........... II............ 1.1G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25 Cartridges, flash. 1.3G UN0050........... II............ 1.3G.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 03............ 25 Cartridges for 1.1C UN0326........... II............ 1.1C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 weapons, blank. Cartridges for 1.2C UN0413........... II............ 1.2C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 weapons, blank.#

Passage 179* * * * * * * Cartridges for 1.3C UN0327........... II............ 1.3C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 weapons, blank or Cartridges, small arms, blank. Cartridges for 1.4C UN0338........... II............ 1.4C.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 weapons, blank or Cartridges, small arms, blank. Cartridges for 1.2C UN0328........... II............ 1.2C.......... ................. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25 weapons, inert projectile. Cartridges for 1.4S UN0012........... II............ 1.4S.......... ................. 63............ 62............ None.......... 25 kg......... 100 kg........ 01............ 25 weapons, inert projectile or Cartridges, small arms. Cartridges for 1.4C UN0339........... II............ 1.4C.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 weapons, inert projectile or Cartridges, small arms. Cartridges for 1.3C UN0417........... II............ 1.3C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 weapons, inert projectile or Cartridges, small arms. Cartridges for 1.1F UN0005........... II............ 1.1F.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 weapons, with bursting charge. Cartridges for 1.1E UN0006........... II............ 1.1E.......... ................. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25 weapons, with bursting charge. Cartridges for 1.2F UN0007........... II............ 1.2F.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 weapons, with bursting charge. Cartridges for 1.2E UN0321........... II............ 1.2E.......... ................. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25 weapons, with bursting charge. Cartridges for 1.4F UN0348........... II............ 1.4F.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 weapons,#

Passage 180with bursting charge. Cartridges for 1.4E UN0412........... II............ 1.4E.......... ................. None.......... 62............ 62............ Forbidden..... 75 kg......... 03............ 25 weapons, with bursting charge. Cartridges, oil 1.3C UN0277........... II............ 1.3C.......... ................. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25 well. Cartridges, oil 1.4C UN0278........... II............ 1.4C.......... ................. None.......... 62............ 62............ Forbidden..... 75 kg......... 02............ 25 well. Cartridges, power 1.3C UN0275........... II............ 1.3C.......... ................. None.......... 62............ 62............ Forbidden..... 75 kg......... 04............ 25 device. Cartridges, power 1.4C UN0276........... II............ 1.4C.......... 110.............. None.......... 62............ 62............ Forbidden..... 75 kg......... 02............ 25 device. Cartridges, power 1.4S UN0323........... II............ 1.4S.......... 110, 347......... None.......... 62............ 62............ 25 kg......... 100 kg........ 01............ 25 device. Cartridges, power 1.2C UN0381........... II............ 1.2C.......... ................. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25 device. * * * * * * * Cartridges, signal 1.3G UN0054........... II............ 1.3G.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 03............ 25 Cartridges, signal 1.4G UN0312........... II............ 1.4G.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 Cartridges, signal 1.4S UN0405........... II............ 1.4S.......... ................. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25 D Cartridges, small ORM-D ................. .............. None.......... 222.............. 63............ None.......... None.......... 30 kg gross... Forbidden..... A arms. D Cartridges power ORM-D None............. .............. None.......... 222.............. 63............ None.......... None.......... 30 kg gross... Forbidden..... A device (used to project fastening devices).#

Passage 181* * * * * * * Cases, cartridge, 1.4S UN0055........... II............ 1.4S.......... 50............... 63............ 62............ None.......... 25 kg......... 100 kg........ 01............ 25 empty with primer. Cases, cartridges, 1.4C UN0379........... II............ 1.4C.......... 50............... None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 empty with primer. Cases, 1.4C UN0446........... II............ 1.4C.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 combustible, empty, without primer. Cases, 1.3C UN0447........... II............ 1.3C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 combustible, empty, without primer. * * * * * * * Cells, containing 4.3 UN3292........... II............ 4.3........... ................. 189........... 189........... 189........... 25 kg......... No limit...... A sodium. * * * * * * * Charges, bursting, 1.1D UN0457........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 plastics bonded. Charges, bursting, 1.2D UN0458........... II............ 1.2D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 plastics bonded. Charges, bursting, 1.4D UN0459........... II............ 1.4D.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 plastics bonded. Charges, bursting, 1.4S UN0460........... II............ 1.4S.......... 347.............. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25 plastics bonded. Charges, 1.1D UN0048........... II............ 1.1D.......... ................. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25 demolition. Charges, depth.... 1.1D UN0056........... II............ 1.1D.......... ................. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25#

Passage 182* * * * * * * Charges, 1.1D UN0442........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 explosive, commercial without detonator. Charges, 1.2D UN0443........... II............ 1.2D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 explosive, commercial without detonator. Charges, 1.4D UN0444........... II............ 1.4D.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 explosive, commercial without detonator. Charges, 1.4S UN0445........... II............ 1.4S.......... 347.............. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25 explosive, commercial without detonator. Charges, 1.1C UN0271........... II............ 1.1C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 propelling. Charges, 1.3C UN0272........... II............ 1.3C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 propelling. Charges, 1.2C UN0415........... II............ 1.2C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 propelling. Charges, 1.4C UN0491........... II............ 1.4C.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 propelling. Charges, 1.3C UN0242........... II............ 1.3C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 propelling, for cannon. Charges, 1.1C UN0279........... II............ 1.1C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 propelling, for cannon. Charges, 1.2C UN0414........... II............ 1.2C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 propelling, for cannon.#

Passage 183Charges, shaped, 1.4D UN0237........... II............ 1.4D.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 flexible, linear. Charges, shaped, 1.1D UN0288........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 flexible, linear. Charges, shaped, 1.1D UN0059........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 without detonator. Charges, shaped, 1.2D UN0439........... II............ 1.2D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 without detonator. Charges, shaped, 1.4D UN0440........... II............ 1.4D.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 without detonator. Charges, shaped, 1.4S UN0441........... II............ 1.4S.......... 347.............. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25 without detonator. Charges, 1.1D UN0060........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 supplementary explosive. * * * * * * * Chlorosilanes, 3 UN2985........... II............ 3, 8.......... T14, TP2, TP7, None.......... 206........... 243........... Forbidden..... 5 L........... B............. 40 flammable, TP13, TP27. corrosive, n.o.s. Chlorosilanes, 6.1 UN3362........... II............ 6.1,8,3....... T14, TP2, TP7, None.......... 206........... 243........... Forbidden..... 30 L.......... C............. 40, 125 toxic, corrosive, TP13, TP27. flammable, n.o.s. Chlorosilanes, 6.1 UN3361........... II............ 6.1, 8........ T14, TP2, TP7, None.......... 206........... 243........... Forbidden..... 30 L.......... C............. 40 toxic, corrosive, TP13, TP27. n.o.s.#

Passage 184* * * * * * * Components, 1.2B UN0382........... II............ 1.2B.......... 101.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 explosive train, n.o.s. Components, 1.4B UN0383........... II............ 1.4B.......... 101.............. None.......... 62............ None.......... Forbidden..... 75 kg......... 05............ 25 explosive train, n.o.s. Components, 1.4S UN0384........... II............ 1.4S.......... 101.............. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25 explosive train, n.o.s. Components, 1.1B UN0461........... II............ 1.1B.......... 101.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 explosive train, n.o.s. * * * * * * * Contrivances, 1.2L UN0248........... II............ 1.2L.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 14E, 15E, water-activated, 17E with burster, expelling charge or propelling charge. Contrivances, 1.3L UN0249........... II............ 1.3L.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25, 14E, 15E, water-activated, 17E with burster, expelling charge or propelling charge. * * * * * * * Copra............. 4.2 UN1363........... III........... 4.2........... IB8, IP3, IP7.... None.......... 213........... 241........... Forbidden..... Forbidden..... A............. 13, 25, 119#

Passage 185* * * * * * * Cord, detonating, 1.1D UN0065........... II............ 1.1D.......... 102.............. 63(a)......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 flexible. Cord, detonating, 1.4D UN0289........... II............ 1.4D.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 flexible. Cord detonating or 1.2D UN0102........... II............ 1.2D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 Fuse detonating metal clad. Cord, detonating 1.1D UN0290........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 or Fuse, detonating metal clad. Cord, detonating, 1.4D UN0104........... II............ 1.4D.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 mild effect or Fuse, detonating, mild effect metal clad. Cord, igniter..... 1.4G UN0066........... II............ 1.4G.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 * * * * * * * Cutters, cable, 1.4S UN0070........... II............ 1.4S.......... ................. None.......... 62............ 62............ 25 kg......... 100 kg........ 01............ 25 explosive. * * * * * * * Cyclotetramethylen 1.1D UN0484........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 etetranitramine, desensitized or Octogen, desensitized or HMX, desensitized. Cyclotetramethylen 1.1D UN0226........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 etetranitramine, wetted or HMX, wetted or Octogen, wetted with not less than 15 percent water, by mass.#

Passage 186* * * * * * * Cyclotrimethylenet 1.1D UN0483........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 rinitramine, desensitized or Cyclonite, desensitized or Hexogen, desensitized or RDX, desensitized. Cyclotrimethylenet 1.1D UN0072........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 rinitramine, wetted or Cyclonite, wetted or Hexogen, wetted or RDX, wetted with not less than 15 percent water by mass. * * * * * * * Deflagrating metal 1.3C UN0132........... II............ 1.3C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 5E salts of aromatic nitroderivatives, n.o.s.#

Passage 187* * * * * * * Detonator 1.1B UN0360........... II............ 1.1B.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 assemblies, non- electric for blasting. Detonator 1.4B UN0361........... II............ 1.4B.......... 103.............. 63(f), 63(g).. 62............ None.......... Forbidden..... 75 kg......... 05............ 25 assemblies, non- electric, for blasting. Detonator 1.4S UN0500........... II............ 1.4S.......... 347.............. 63(f), 63(g).. 62............ None.......... 25 kg......... 100 kg........ 01............ 25 assemblies, non- electric, for blasting. Detonators, 1.1B UN0030........... II............ 1.1B.......... ................. 63(f), 63(g).. 62............ None.......... Forbidden..... Forbidden..... 05............ 25 electric, for blasting. Detonators, 1.4B UN0255........... II............ 1.4B.......... 103.............. 63(f), 63(g).. 62............ None.......... Forbidden..... 75 kg......... 05............ 25 electric, for blasting. Detonators, 1.4S UN0456........... II............ 1.4S.......... 347.............. 63(f), 63(g).. 62............ None.......... 25 kg......... 100 kg........ 01............ 25 electric for blasting. Detonators for 1.1B UN0073........... II............ 1.1B.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 ammunition. Detonators for 1.2B UN0364........... II............ 1.2B.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 ammunition. Detonators for 1.4B UN0365........... II............ 1.4B.......... 103.............. None.......... 62............ None.......... Forbidden..... 75 kg......... 05............ 25 ammunition.#

Passage 188Detonators for 1.4S UN0366........... II............ 1.4S.......... 347.............. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25 ammunition. Detonators, non- 1.1B UN0029........... II............ 1.1B.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 electric, for blasting. Detonators, non- 1.4B UN0267........... II............ 1.4B.......... 103.............. 63(f), 63(g).. 62............ None.......... Forbidden..... 75 kg......... 05............ 25 electric, for blasting. Detonators, non- 1.4S UN0455........... II............ 1.4S.......... 347.............. 63(f), 63(g).. 62............ None.......... 25 kg......... 100 kg........ 01............ 25 electric, for blasting. * * * * * * * Diazodinitrophenol 1.1A UN0074........... II............ 1.1A.......... 111, 117......... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 , wetted with not less than 40 percent water or mixture of alcohol and water, by mass. * * * * * * * Dichlorophenyl 6.1 UN2250........... II............ 6.1........... IB8, IP2, IP4, 153........... 212........... 242........... 25 kg......... 100 kg........ B............. 25, 40 isocyanates. T3, TP33. * * * * * * * Dicyclohexylammoni 4.1 UN2687........... III........... 4.1........... IB8, IP3, T1, 151........... 213........... 240........... 25 kg......... 100 kg........ A............. 25 um nitrite. TP33. * * * * * * * Diethyleneglycol 1.1D UN0075........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 21E dinitrate, desensitized with not less than 25 percent non- volatile water- insoluble phlegmatizer, by mass. * * * * * * * Dimethyl disulfide 3 UN2381........... II............ 3, 6.1........ IB2, T7, TP2, 150........... 202........... 242........... Forbidden..... Forbidden..... B............. 40 TP13, TP39. * * * * * * * Dinitroglycoluril 1.1D UN0489........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 or Dingu.#

Passage 189* * * * * * * Dinitrophenol, dry 1.1D UN0076........... II............ 1.1D, 6.1..... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 5E or wetted with less than 15 percent water, by mass. * * * * * * * Dinitrophenolates 1.3C UN0077........... II............ 1.3C, 6.1..... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 5E alkali metals, dry or wetted with less than 15 percent water, by mass. * * * * * * * Dinitroresorcinol, 1.1D UN0078........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 5E dry or wetted with less than 15 percent water, by mass. * * * * * * * Dinitrosobenzene.. 1.3C UN0406........... II............ 1.3C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 * * * * * * * Dipicryl sulfide, 1.1D UN0401........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 dry or wetted with less than 10 percent water, by mass. * * * * * * * Engines, internal 9 UN3166........... .............. 9............. 135, A200........ 220........... 220........... 220........... Forbidden..... No limit...... A combustion, or Engines, fuel cell, flammable gas powered. Engines internal 9 UN3166........... .............. 9............. 135, A200........ 220........... 220........... 220........... No limit...... No limit...... A combustion, or Engines, fuel cell, flammable liquid powered. * * * * * * * G Environmentally 9 UN3077........... III........... 9............. 8, 146, 335, 155........... 213........... 240........... No limit...... No limit...... A hazardous A112, B54, B120, substance, solid, IB8, IP3, N20, n.o.s. T1, TP33. * * * * * * * Ethyltrichlorosila 3 UN1196........... II............ 3, 8.......... A7, N34, T10, None.......... 206........... 243........... Forbidden..... 5 L........... B............. 40 ne. TP2, TP7, TP13.#

Passage 190* * * * * * * Explosive, 1.1D UN0081........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 19E, 21E blasting, type A. Explosive, 1.1D UN0082........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 19E blasting, type B. Explosive, 1.5D UN0331........... II............ 1.5D.......... 105, 106......... None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25, 19E blasting, type B or Agent blasting, Type B. Explosive, 1.1D UN0083........... II............ 1.1D.......... 123.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 22E blasting, type C. Explosive, 1.1D UN0084........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 blasting, type D. Explosive, 1.1D UN0241........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 19E blasting, type E. Explosive, 1.5D UN0332........... II............ 1.5D.......... 105, 106......... None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25, 19E blasting, type E or Agent blasting, Type E. * * * * * * * Fireworks......... 1.1G UN0333........... II............ 1.1G.......... 108.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25 Fireworks......... 1.2G UN0334........... II............ 1.2G.......... 108.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25 Fireworks......... 1.3G UN0335........... II............ 1.3G.......... 108.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25 Fireworks......... 1.4G UN0336........... II............ 1.4G.......... 108.............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 Fireworks......... 1.4S UN0337........... II............ 1.4S.......... 108.............. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25#

Passage 191* * * * * * * W Fish meal, 9 UN2216........... III........... None.......... 155, IB8, IP3, 155........... 218........... 218........... No limit...... No limit...... B............. 25, 88, 122, stabilized or T1, TP33. 128 Fish scrap, stabilized. * * * * * * * Fish meal, 4.2 UN1374........... II............ 4.2........... 155, A1, A19, None.......... 212........... 241........... 15 kg......... 50 kg......... B............. 18, 25, 128 unstablized or IB8, IP2, IP4, Fish scrap, T3, TP33. unstabilized. * * * * * * * Flares, aerial.... 1.3G UN0093........... II............ 1.3G.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 03............ 25 Flares, aerial.... 1.4G UN0403........... II............ 1.4G.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 Flares, aerial.... 1.4S UN0404........... II............ 1.4S.......... ................. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25 Flares, aerial.... 1.1G UN0420........... II............ 1.1G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25 Flares, aerial.... 1.2G UN0421........... II............ 1.2G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25 * * * * * * * Flares, surface... 1.3G UN0092........... II............ 1.3G.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 03............ 25 Flares, surface... 1.1G UN0418........... II............ 1.1G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25 Flares, surface... 1.2G UN0419........... II............ 1.2G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25 * * * * * * * Flash powder...... 1.1G UN0094........... II............ 1.1G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25 Flash powder...... 1.3G UN0305........... II............ 1.3G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25#

Passage 192* * * * * * * Fracturing 1.1D UN0099........... II............ 1.1D.......... ................. None.......... 62............ 62............ Forbidden..... Forbidden..... 04............ 25 devices, explosive, without detonators for oil wells. * * * * * * * Fuel cell 8 UN3477........... .............. 8............. 328.............. 230........... 230........... 230........... 5 kg.......... 50 kg......... A cartridges or Fuel cell cartridges contained in equipment or Fuel cell cartridges packed with equipment, containing corrosive substances. Fuel cell 3 UN3473........... .............. 3............. 328.............. 230........... 230........... 230........... 5 kg.......... 50 kg......... A cartridges or Fuel cell cartridges contained in equipment or Fuel cell cartridges packed with equipment, containing flammable liquids. Fuel cell 2.1 UN3479........... .............. 2.1........... 328.............. 230........... 230........... 230........... 1 kg.......... 15 kg......... B cartridges or Fuel cell cartridges contained in equipment or Fuel cell cartridges packed with equipment, containing hydrogen in metal hydride. Fuel cell 2.1 UN3478........... .............. 2.1........... 328.............. 230........... 230........... 230........... 1 kg.......... 15 kg......... B cartridges or Fuel cell cartridges contained in equipment or Fuel cell cartridges packed with equipment, containing liquefied flammable gas. Fuel cell 4.3 UN3476........... .............. 4.3........... 328.............. 230........... 230........... 230........... 5 kg.......... 50 kg......... A cartridges or Fuel cell cartridges contained in equipment or Fuel cell cartridges packed with equipment, containing water- reactive substances. * * * * * * * Fuse, igniter 1.4G UN0103........... II............ 1.4G.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 tubular metal clad. Fuse, non- 1.3G UN0101........... II............ 1.3G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25 detonating instantaneous or quickmatch. Fuse, safety...... 1.4S UN0105........... II............ 1.4S.......... ................. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25#

Passage 193* * * * * * * Fuzes, detonating. 1.1B UN0106........... II............ 1.1B.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 Fuzes, detonating. 1.2B UN0107........... II............ 1.2B.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 Fuzes, detonating. 1.4B UN0257........... II............ 1.4B.......... 116.............. None.......... 62............ None.......... Forbidden..... 75 kg......... 05............ 25 Fuzes, detonating. 1.4S UN0367........... II............ 1.4S.......... 116.............. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25 Fuzes, detonating, 1.1D UN0408........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 with protective features. Fuzes, detonating, 1.2D UN0409........... II............ 1.2D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 with protective features. Fuzes, detonating, 1.4D UN0410........... II............ 1.4D.......... 116.............. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 with protective features. Fuzes, igniting... 1.3G UN0316........... II............ 1.3G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25 Fuzes, igniting... 1.4G UN0317........... II............ 1.4G.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 Fuzes, igniting... 1.4S UN0368........... II............ 1.4S.......... ................. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25 * * * * * * * Gallium........... 8 UN2803........... III........... 8............. T1, TP33......... None.......... 162........... 240........... 20 kg......... 20 kg......... B............. 25 * * * * * * * Gasoline includes 3 UN1203........... II............ 3............. 144, 177, B1, 150........... 202........... 242........... 5 L........... 60 L.......... E gasoline mixed B33, IB2, T4. with ethyl alcohol, with not more than 10% alcohol.#

Passage 194* * * * * * * Grenades, hand or 1.1D UN0284........... II............ 1.1D.......... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 04............ 25 rifle, with bursting charge. Grenades, hand or 1.2D UN0285........... II............ 1.2D.......... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 04............ 25 rifle, with bursting charge. Grenades, hand or 1.1F UN0292........... II............ 1.1F.......... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25 rifle, with bursting charge. Grenades, hand or 1.2F UN0293........... II............ 1.2F.......... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25 rifle, with bursting charge. * * * * * * * Grenades, 1.4S UN0110........... II............ 1.4S.......... ................. .............. 62............ None.......... 25 kg......... 100 kg........ 01............ 25 practice, hand or rifle. Grenades, 1.3G UN0318........... II............ 1.3G.......... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 03............ 25 practice, hand or rifle. Grenades, 1.2G UN0372........... II............ 1.2G.......... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 03............ 25 practice, hand or rifle. Grenades practice, 1.4G UN0452........... II............ 1.4G.......... ................. .............. 62............ None.......... Forbidden..... 75 kg......... 02............ 25 hand or rifle. * * * * * * * Guanyl 1.1A UN0113........... II............ 1.1A.......... 111, 117......... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 nitrosaminoguanyl idene hydrazine, wetted with not less than 30 percent water, by mass. * * * * * * * Guanyl 1.1A UN0114........... II............ 1.1A.......... 111, 117......... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 nitrosaminoguanyl tetrazene, wetted or Tetrazene, wetted with not less than 30 percent water or mixture of alcohol and water, by mass.#

Passage 195* * * * * * * Hexanitrodiphenyla 1.1D UN0079........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 mine or Dipicrylamine or Hexyl. * * * * * * * Hexanitrostilbene. 1.1D UN0392........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 * * * * * * * Hexolite, or 1.1D UN0118........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 Hexotol dry or wetted with less than 15 percent water, by mass. * * * * * * * Hexotonal......... 1.1D UN0393........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 * * * * * * * Hydrogen in a 2.1 UN3468........... .............. 2.1........... 167.............. None.......... 311........... None.......... Forbidden..... 100 kg........ D metal hydride storage system or Hydrogen in a metal hydride storage system contained in equipment or Hydrogen in a metal hydride storage system packed with equipment. * * * * * * * 1- 1.3C UN0508........... .............. 1.3C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 Hydroxybenzotriaz ole, anhydrous, dry or wetted with less than 20 percent water, by mass. * * * * * * * G Hypochlorites, 5.1 UN3212........... II............ 5.1........... 349, A9, IB8, 152........... 212........... 240........... 5 kg.......... 25 kg......... D............. 4, 25, 52, 56, inorganic, n.o.s. IP2, IP4, T3, 58, 69, 106, TP33. 116, 118#

Passage 196* * * * * * * Igniters.......... 1.1G UN0121........... II............ 1.1G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25 Igniters.......... 1.2G UN0314........... II............ 1.2G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25 Igniters.......... 1.3G UN0315........... II............ 1.3G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 03............ 25 Igniters.......... 1.4G UN0325........... II............ 1.4G.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 Igniters.......... 1.4S UN0454........... II............ 1.4S.......... ................. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25 * * * * * * * G Isocyanates, 6.1 UN3080........... II............ 6.1, 3........ IB2, T11, TP2, 153........... 202........... 243........... 5 L........... 60 L.......... B............. 25, 40 toxic, flammable, TP13, TP27. n.o.s. or Isocyanate solutions, toxic, flammable, n.o.s., flash point not less than 23 degrees C but not more than 61 degrees C and boiling point less than 300 degrees C. G Isocyanates, 6.1 UN2206........... II............ 6.1........... IB2, T11, TP2, 153........... 202........... 243........... 5 L........... 60 L.......... E............. 25, 40 toxic, n.o.s. or TP13, TP27. Isocyanate solutions, toxic, n.o.s., flash point more than 61 degrees C and boiling point less than 300 degrees C. .................. ......... ................. III........... 6.1........... IB3, T7, TP1, 153........... 203........... 241........... 60 L.......... 220 L......... E............. 25, 40 TP13, TP28. Isocyanatobenzotri 6.1 UN2285........... II............ 6.1, 3........ 5, IB2, T7, TP2.. 153........... 202........... 243........... 5 L........... 60 L.......... D............. 25, 40 fluorides. * * * * * * * Isosorbide-5- 4.1 UN3251........... III........... 4.1........... 66, 159, IB8..... 151........... 223........... 240........... Forbidden..... Forbidden..... D............. 12, 25, 40, 84 mononitrate.#

Passage 197* * * * * * * D Jet perforating 1.1D NA0124........... II............ 1.1D.......... 55, 56........... None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 guns, charged oil well, with detonator. D Jet perforating 1.4D NA0494........... II............ 1.4D.......... 55, 56........... None.......... 62............ None.......... Forbidden..... Forbidden..... 02............ 25 guns, charged oil well, with detonator. Jet perforating 1.4D UN0494........... II............ 1.4D.......... 55, 114.......... None.......... 62............ None.......... Forbidden..... 300 kg........ 02............ 25 guns, charged, oil well, without detonator. Jet perforating 1.1D UN0124........... II............ 1.1D.......... 55............... None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 guns, charged oil well, without detonator. * * * * * * * Lead azide, wetted 1.1A UN0129........... II............ 1.1A.......... 111, 117......... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 with not less than 20 percent water or mixture of alcohol and water, by mass. * * * * * * * Lead styphnate, 1.1A UN0130........... II............ 1.1A.......... 111, 117......... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 wetted or Lead trinitroresorcina te, wetted with not less than 20 percent water or mixture of alcohol and water, by mass. * * * * * * * Lighters, fuse.... 1.4S UN0131........... II............ 1.4S.......... ................. None.......... 62............ None.......... 25 kg......... 100 kg........ 01............ 25 * * * * * * * Lithium battery... 9 UN3090........... II............ 9............. 29, 188, 189, 185........... 185........... None.......... See A100...... 35 kg......... A 190, A51, A54, A55, A100. * * * * * * * Lithium batteries, 9 UN3091........... II............ 9............. 29, 188, 189, 185........... 185........... None.......... See A101, A104 35 kg......... A contained in 190, 360, A54, equipment. A55, A101, A104. Lithium batteries 9 UN3091........... II............ 9............. 29, 188, 189, 185........... 185........... None.......... See A101, 35 kg......... A packed with 190, A54, A55, A103.. equipment. A101, A103.#

Passage 198* * * * * * * Lithium 5.1 UN1471........... II............ 5.1........... A9, IB8, IP2, 152........... 212........... 240........... 5 kg.......... 25 kg......... A............. 4, 25, 52, 56, hypochlorite, dry IP4, N34, T3, 58, 69, 106, or Lithium TP33. 116 hypochlorite mixture. .................. ......... ................. III........... 5.1........... IB8, IP3, N34, 152........... 213........... 240........... 25 kg......... 100 kg........ A............. 4, 25, 52, 56, T1, TP33. 58, 69, 106, 116 * * * * * * * Magnesium nitrate. 5.1 UN1474........... III........... 5.1........... 332, A1, B120, 152........... 213........... 240........... 25 kg......... 100 kg........ A IB8, IP3, T1, TP33. * * * * * * * Mannitol 1.1D UN0133........... II............ 1.1D.......... 121.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 hexanitrate, wetted or Nitromannite, wetted with not less than 40 percent water, or mixture of alcohol and water, by mass. * * * * * * * 5-Mercaptotetrazol- 1.4C UN0448........... II............ 1.4C.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 02............ 25 1-acetic acid. * * * * * * * A W Mercury........... 8 UN2809........... III........... 8, 6.1........ 365.............. 164........... 164........... 240........... 35 kg......... 35 kg......... B............. 40, 97 * * * * * * * Mercury fulminate, 1.1A UN0135........... II............ 1.1A.......... 111, 117......... None.......... 62............ None.......... Forbidden..... Forbidden..... 05............ 25 wetted with not less than 20 percent water, or mixture of alcohol and water, by mass. * * * * * * * + Methacrylonitrile, 6.1 UN3079........... I............. 6.1, 3........ 2, B9, B14, B32, None.......... 227........... 244........... Forbidden..... Forbidden..... D............. 12, 25, 40 stabilized. T20, TP2, TP13, TP38, TP45. * * * * * * * Methyltrichlorosil 3 UN1250........... II............ 3, 8.......... A7, B6, B77, N34, None.......... 206........... 243........... Forbidden..... 5 L........... B............. 40 ane. T10, TP2, TP7, TP13.#

Passage 199* * * * * * * Mines with 1.1F UN0136........... II............ 1.1F.......... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25 bursting charge. Mines with 1.1D UN0137........... II............ 1.1D.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 04............ 25 bursting charge. Mines with 1.2D UN0138........... II............ 1.2D.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 04............ 25 bursting charge. Mines with 1.2F UN0294........... II............ 1.2F.......... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 05............ 25 bursting charge. * * * * * * * Naphthalene, crude 4.1 UN1334........... III........... 4.1........... A1, B120,IB8, 151........... 213........... 240........... 25 kg......... 100 kg........ A or Naphthalene, IP3, T1, TP33. refined. * * * * * * * Nitro urea........ 1.1D UN0147........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 * * * * * * * 5- 1.1D UN0385........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 Nitrobenzotriazol. * * * * * * * Nitrocellulose, 1.1D UN0340........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 27E dry or wetted with less than 25 percent water (or alcohol), by mass. * * * * * * * Nitrocellulose, 1.3C UN0343........... II............ 1.3C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 plasticized with not less than 18 percent plasticizing substance, by mass.#

Passage 200* * * * * * * Nitrocellulose, 1.1D UN0341........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 27E unmodified or plasticized with less than 18 percent plasticizing substance, by mass. Nitrocellulose, 1.3C UN0342........... II............ 1.3C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 wetted with not less than 25 percent alcohol, by mass. * * * * * * * Nitroglycerin, 1.1D UN0143........... II............ 1.1D, 6.1..... 125.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 21E desensitized with not less than 40 percent non- volatile water insoluble phlegmatizer, by mass. * * * * * * * Nitroglycerin, 1.1D UN0144........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25, 21E solution in alcohol, with more than 1 percent but not more than 10 percent nitroglycerin. * * * * * * * Nitroguanidine or 1.1D UN0282........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 Picrite, dry or wetted with less than 20 percent water, by mass. * * * * * * * Nitrostarch, dry 1.1D UN0146........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 or wetted with less than 20 percent water, by mass. * * * * * * * Nitrotriazolone or 1.1D UN0490........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 NTO. * * * * * * * Octolite or Octol, 1.1D UN0266........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 dry or wetted with less than 15 percent water, by mass. Octonal........... 1.1D UN0496........... .............. 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25#

Passage 201* * * * * * * D G Other regulated 9 NA3082........... III........... 9............. IB3, T2, TP1..... 155........... 203........... 241........... No limit...... No limit...... A substances, liquid, n.o.s. * * * * * * * Paraformaldehyde.. 4.1 UN2213........... III........... 4.1........... A1, B120, IB8, 151........... 213........... 240........... 25 kg......... 100 kg........ A IP3, T1, TP33. * * * * * * * Pentaerythrite 1.1D UN0411........... II............ 1.1D.......... 120.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 tetranitrate or Pentaerythritol tetranitrate or PETN, with not less than 7 percent wax by mass. Pentaerythrite 1.1D UN0150........... II............ 1.1D.......... 121.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 tetranitrate, wetted or Pentaerythritol tetranitrate, wetted, or PETN, wetted with not less than 25 percent water, by mass, or Pentaerythrite tetranitrate, or Pentaerythritol tetranitrate or PETN, desensitized with not less than 15 percent phlegmatizer by mass. * * * * * * * Pentolite, dry or 1.1D UN0151........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 04............ 25 wetted with less than 15 percent water, by mass. * * * * * * * Phosgene.......... 2.3 UN1076........... .............. 2.3, 8........ 1, B7, B46, N86.. None.......... 192........... 314........... Forbidden..... Forbidden..... D............. 40 * * * * * * * Phosphorous acid.. 8 UN2834........... III........... 8............. IB8, IP3, T1, 154........... 213........... 240........... 25 kg......... 100 kg........ A............. 25 TP33. * * * * * * * Plastic molding 9 UN3314........... III........... 9............. 32, IB8, IP3, IP7 155........... 221........... 221........... 100 kg........ 200 kg........ E............. 21, 25, 87, compound in 144 dough, sheet or extruded rope form evolving flammable vapor. * * * * * * * Polymeric beads 9 UN2211........... III........... 9............. 32, IB8, IP3, 155........... 221........... 221........... 100 kg........ 200 kg........ E............. 21, 25, 87, expandable, IP7, T1, TP33. 144 evolving flammable vapor.#

Passage 202* * * * * * * Potassium nitrate. 5.1 UN1486........... III........... 5.1........... A1, A29, B120 152........... 213........... 240........... 25 kg......... 100 kg........ A IB8, IP3, T1, TP33, W1. * * * * * * * Powder cake, 1.1C UN0433........... II............ 1.1C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 wetted or Powder paste, wetted with not less than 17 percent alcohol by mass. Powder cake, 1.3C UN0159........... II............ 1.3C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 wetted or Powder paste, wetted with not less than 25 percent water, by mass. * * * * * * * Powder, smokeless. 1.1C UN0160........... II............ 1.1C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25, 26E Powder, smokeless. 1.3C UN0161........... II............ 1.3C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25, 26E Powder, smokeless. 1.4C UN0509........... .............. 1.4C.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 2............. 25 * * * * * * * Primers, cap type. 1.4S UN0044........... II............ None.......... ................. None.......... 62............ None.......... 25 kg......... 100 kg........ 1............. 25 Primers, cap type. 1.1B UN0377........... II............ 1.1B.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 5............. 25 Primers, cap type. 1.4B UN0378........... II............ 1.4B.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 5............. 25#

Passage 203* * * * * * * Primers, tubular.. 1.3G UN0319........... II............ 1.3G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 3............. 25 Primers, tubular.. 1.4G UN0320........... II............ 1.4G.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 2............. 25 Primers, tubular.. 1.4S UN0376........... II............ None.......... ................. None.......... 62............ None.......... 25 kg......... 100 kg........ 1............. 25 * * * * * * * Projectiles, 1.4S UN0345........... II............ 1.4S.......... ................. .............. 62............ 62............ 25 kg......... 100 kg........ 1............. 25 inert, with tracer. Projectiles, 1.3G UN0424........... II............ 1.3G.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 3............. 25 inert, with tracer. Projectiles, 1.4G UN0425........... II............ 1.4G.......... ................. .............. 62............ 62............ Forbidden..... 75 kg......... 2............. 25 inert, with tracer. Projectiles, with 1.2D UN0346........... II............ 1.2D.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 4............. 25 burster or expelling charge. Projectiles, with 1.4D UN0347........... II............ 1.4D.......... ................. .............. 62............ 62............ Forbidden..... 75 kg......... 2............. 25 burster or expelling charge.#

Passage 204Projectiles, with 1.2F UN0426........... II............ 1.2F.......... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 5............. 25 burster or expelling charge. Projectiles, with 1.4F UN0427........... II............ 1.4F.......... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 5............. 25 burster or expelling charge. Projectiles, with 1.2G UN0434........... II............ 1.2G.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 3............. 25 burster or expelling charge. Projectiles, with 1.4G UN0435........... II............ 1.4G.......... ................. .............. 62............ 62............ Forbidden..... 75 kg......... 2............. 25 burster or expelling charge. Projectiles, with 1.1F UN0167........... II............ 1.1F.......... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 5............. 25 bursting charge. Projectiles, with 1.1D UN0168........... II............ 1.1D.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 4............. 25 bursting charge. Projectiles, with 1.2D UN0169........... II............ 1.2D.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 4............. 25 bursting charge. Projectiles, with 1.2F UN0324........... II............ 1.2F.......... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 5............. 25 bursting charge. Projectiles, with 1.4D UN0344........... II............ 1.4D.......... ................. .............. 62............ 62............ Forbidden..... 75 kg......... 2............. 25 bursting charge.#

Passage 205* * * * * * * Propellant, liquid 1.3C UN0495........... II............ 1.3C.......... 37............... None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 Propellant, liquid 1.1C UN0497........... II............ 1.1C.......... 37............... None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 Propellant, solid. 1.1C UN0498........... II............ 1.1C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25, 26E Propellant, solid. 1.3C UN0499........... II............ 1.3C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25, 26E Propellant, solid. 1.4C UN0501........... .............. 1.4C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 2............. 25, 24E * * * * * * * Propylene 6.1 UN2611........... II............ 6.1, 3........ IB2, T7, TP2, 153........... 202........... 243........... 5 L........... 60 L.......... A............. 12, 25, 40 chlorohydrin. TP13. * * * * * * * RDX and HMX 1.1D UN0391........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 mixtures, wetted with not less than 15 percent water by mass or RDX and HMX mixtures, desensitized with not less than 10 percent phlegmatizer by mass. * * * * * * * Release devices, 1.4S UN0173........... II............ 1.4S.......... ................. None.......... 62............ 62............ 25 kg......... 100 kg........ 1............. 25 explosive. * * * * * * * Rivets, explosive. 1.4S UN0174........... II............ 1.4S.......... ................. None.......... 62............ 62............ 25 kg......... 100 kg........ 1............. 25#

Passage 206* * * * * * * Rocket motors..... 1.3C UN0186........... II............ 1.3C.......... 109.............. None.......... 62............ 62............ Forbidden..... 220 kg........ 4............. 25 Rocket motors..... 1.1C UN0280........... II............ 1.1C.......... 109.............. None.......... 62............ 62............ Forbidden..... Forbidden..... 4............. 25 Rocket motors..... 1.2C UN0281........... II............ 1.2C.......... 109.............. None.......... 62............ 62............ Forbidden..... Forbidden..... 4............. 25 Rocket motors, 1.2J UN0395........... II............ 1.2J.......... 109.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 5............. 25, 23E liquid fueled. Rocket motors, 1.3J UN0396........... II............ 1.3J.......... 109.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 5............. 25, 23E liquid fueled. Rocket motors with 1.3L UN0250........... II............ 1.3L.......... 109.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 5............. 25, 14E, 15E hypergolic liquids with or without an expelling charge. Rocket motors with 1.2L UN0322........... II............ 1.2L.......... 109.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 5............. 25, 14E, 15E hypergolic liquids with or without an expelling charge. Rockets, line- 1.2G UN0238........... II............ 1.2G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 3............. 25 throwing. Rockets, line- 1.3G UN0240........... II............ 1.3G.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 3............. 25 throwing. Rockets, line- 1.4G UN0453........... II............ 1.4G.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 2............. 25 throwing.#

Passage 207Rockets, liquid 1.1J UN0397........... II............ 1.1J.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 5............. 25, 23E fueled with bursting charge. Rockets, liquid 1.2J UN0398........... II............ 1.2J.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 5............. 25, 23E fueled with bursting charge. Rockets, with 1.1F UN0180........... II............ 1.1F.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 5............. 25 bursting charge. Rockets, with 1.1E UN0181........... II............ 1.1E.......... ................. None.......... 62............ 62............ Forbidden..... Forbidden..... 4............. 25 bursting charge. Rockets, with 1.2E UN0182........... II............ 1.2E.......... ................. None.......... 62............ 62............ Forbidden..... Forbidden..... 4............. 25 bursting charge. Rockets, with 1.2F UN0295........... II............ 1.2F.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 5............. 25 bursting charge. Rockets, with 1.2C UN0436........... II............ 1.2C.......... ................. None.......... 62............ 62............ Forbidden..... Forbidden..... 4............. 25 expelling charge. Rockets, with 1.3C UN0437........... II............ 1.3C.......... ................. None.......... 62............ 62............ Forbidden..... Forbidden..... 4............. 25 expelling charge. Rockets, with 1.4C UN0438........... II............ 1.4C.......... ................. None.......... 62............ 62............ Forbidden..... 75 kg......... 2............. 25 expelling charge. Rockets, with 1.3C UN0183........... II............ 1.3C.......... ................. None.......... 62............ 62............ Forbidden..... Forbidden..... 4............. 25 inert head. Rockets, with 1.2C UN0502........... .............. 1.2C.......... ................. None.......... 62............ 62............ Forbidden..... Forbidden..... 2............. 25, 5E inert head.#

Passage 208* * * * * * * G Samples, ......... UN0190........... II............ .............. 113.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 5............. 25 explosive, other than initiating explosives. * * * * * * * Seed cake, 4.2 UN1386........... III........... None.......... IB8, IP3, IP7, N7 None.......... 213........... 241........... Forbidden..... Forbidden..... A............. 13, 25 containing vegetable oil solvent extractions and expelled seeds, with not more than 10 percent of oil and when the amount of moisture is higher than 11 percent, with not more than 20 percent of oil and moisture combined. I Seed cake with 4.2 UN1386........... III........... None.......... IB8, IP3, IP7, N7 None.......... 213........... 241........... Forbidden..... Forbidden..... E............. 13, 25 more than 1.5 percent oil and not more than 11 percent moisture. I Seed cake with not 4.2 UN2217........... III........... None.......... IB8, IP3, IP7, N7 None.......... 213........... 241........... Forbidden..... Forbidden..... A............. 13, 25 more than 1.5 percent oil and not more than 11 percent moisture. * * * * * * * Signal devices, 1.4G UN0191........... II............ 1.4G.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 2............. 25 hand. Signal devices, 1.4S UN0373........... II............ 1.4S.......... ................. None.......... 62............ None.......... 25 kg......... 100 kg........ 1............. 25 hand. Signals, distress, 1.1G UN0194........... II............ 1.1G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 3............. 25 ship. Signals, distress, 1.3G UN0195........... II............ 1.3G.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 3............. 25 ship. Signals, distress, 1.4G UN0505........... .............. 1.4G.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 2............. 25 ship. Signals, distress, 1.4S UN0506........... .............. 1.4S.......... ................. None.......... 62............ None.......... 25 kg......... 100 kg........ 1............. 25 ship.#

Passage 209* * * * * * * Signals, railway 1.1G UN0192........... II............ 1.1G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 3............. 25 track,. explosive......... Signals, railway 1.4S UN0193........... II............ 1.4S.......... ................. None.......... 62............ None.......... 25 kg......... 100 kg........ 1............. 25 track,. explosive......... Signals, railway 1.3G UN0492........... .............. 1.3G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 3............. 25 track,. explosive......... Signals, railway 1.4G UN0493........... .............. 1.4G.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 2............. 25 track,. explosive......... * * * * * * * Signals, smoke.... 1.1G UN0196........... II............ 1.1G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 3............. 25 Signals, smoke.... 1.4G UN0197........... II............ 1.4G.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 2............. 25 Signals, smoke.... 1.2G UN0313........... II............ 1.2G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 3............. 25 Signals, smoke.... 1.3G UN0487........... II............ 1.3G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 3............. 25 Signals, smoke.... 1.4S UN0507........... .............. 1.4S.......... ................. None.......... 62............ None.......... 25 kg......... 100 kg........ 1............. 25 * * * * * * * Sodium carbonate 5.1 UN3378........... II............ 5.1........... B120, IB8, IP2, 152........... 212........... 240........... 5 kg.......... 25 kg......... A............. 13, 25, 75 peroxyhydrate. IP4, T3, TP33. .................. ......... ................. III........... 5.1........... B120, IB8, IP3, 152........... 213........... 240........... 25 kg......... 100 kg........ A............. 13, 25, 75 T1, TP33.#

Passage 210* * * * * * * Sodium dinitro-o- 1.3C UN0234........... II............ 1.3C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25, 5E cresolate, dry or wetted with less than 15 percent water, by mass. * * * * * * * Sodium nitrate.... 5.1 UN1498........... III........... 5.1........... A1, A29, B120, 152........... 213........... 240........... 25 kg......... 100 kg........ A IB8, IP3, T1, TP33, W1. Sodium nitrate and 5.1 UN1499........... III........... 5.1........... A1, A29, B120, 152........... 213........... 240........... 25 kg......... 100 kg........ A potassium nitrate IB8, IP3, T1, mixtures. TP33, W1. * * * * * * * Sodium perborate 5.1 UN3377........... III........... 5.1........... B120, IB8, IP3, 152........... 213........... 240........... 25 kg......... 100 kg........ A............. 13, 25, 75 monohydrate. T1, TP33. * * * * * * * Sodium picramate, 1.3C UN0235........... II............ 1.3C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25, 5E dry or wetted with less than 20 percent water, by mass. * * * * * * * Sounding devices, 1.2F UN0204........... II............ 1.2F.......... ................. None.......... 62............ 62............ Forbidden..... Forbidden..... 5............. 25 explosive. Sounding devices, 1.1F UN0296........... II............ 1.1F.......... ................. None.......... 62............ 62............ Forbidden..... Forbidden..... 5............. 25 explosive. Sounding devices, 1.1D UN0374........... II............ 1.1D.......... ................. None.......... 62............ 62............ Forbidden..... Forbidden..... 4............. 25 explosive. Sounding devices, 1.2D UN0375........... II............ 1.2D.......... ................. None.......... 62............ 62............ Forbidden..... Forbidden..... 4............. 25 explosive.#

Passage 211* * * * * * * G Substances, 1.1L UN0357........... II............ 1.1L.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 5............. 25, 14E, 15E explosive, n.o.s. G Substances, 1.2L UN0358........... II............ 1.2L.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 5............. 25, 14E, 15E explosive, n.o.s. G Substances, 1.3L UN0359........... II............ 1.3L.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 5............. 25, 14E, 15E explosive, n.o.s.#

Passage 212G Substances, 1.1A UN0473........... II............ 1.1A.......... 101, 111......... None.......... 62............ None.......... Forbidden..... Forbidden..... 5............. 25 explosive, n.o.s. G Substances, 1.1C UN0474........... II............ 1.1C.......... 101.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 explosive, n.o.s. G Substances, 1.1D UN0475........... II............ 1.1D.......... 101.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 explosive, n.o.s. G Substances, 1.1G UN0476........... II............ 1.1G.......... 101.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 3............. 25 explosive, n.o.s. G Substances, 1.3C UN0477........... II............ 1.3C.......... 101.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 explosive, n.o.s. G Substances, 1.3G UN0478........... II............ 1.3G.......... 101.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 3............. 25 explosive, n.o.s. G Substances, 1.4C UN0479........... II............ 1.4C.......... 101.............. None.......... 62............ None.......... Forbidden..... 75 kg......... 2............. 25 explosive, n.o.s. G Substances, 1.4D UN0480........... II............ 1.4D.......... 101.............. None.......... 62............ None.......... Forbidden..... 75 kg......... 2............. 25 explosive, n.o.s. G Substances, 1.4S UN0481........... II............ 1.4S.......... 101.............. None.......... 62............ None.......... 25 kg......... 75 kg......... 1............. 25 explosive, n.o.s. G Substances, 1.4G UN0485........... II............ 1.4G.......... 101.............. None.......... 62............ None.......... Forbidden..... 75 kg......... 2............. 25 explosive, n.o.s. G Substances, 1.5D UN0482........... II............ 1.5D.......... 101.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 3............. 25 explosive, very insensitive, n.o.s. or Substances, EVI, n.o.s.#

Passage 213* * * * * * * D Sulfur............ 9 NA1350........... III........... 9............. 30, B120, IB8, None.......... None.......... 240........... No Limit...... No Limit...... A............. 25, 74 IP2. I Sulfur............ 4.1 UN1350........... III........... 4.1........... 30, B120, IB8, None.......... None.......... 240........... 25 kg......... 100 kg........ A............. 25, 74 IP3, T1, TP33. * * * * * * * Tetranitroaniline. 1.1D UN0207........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 * * * * * * * Tetrazol-1-acetic 1.4C UN0407........... II............ 1.4C.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 2............. 25 acid. 1H-Tetrazole...... 1.1D UN0504........... .............. 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25, 5E * * * * * * * G Thallium 6.1 UN1707........... II............ 6.1........... IB8, IP2, IP4, 153........... 212........... 242........... 25 kg......... 100 kg........ A compounds, n.o.s. T3, TP33. * * * * * * * Torpedoes, liquid 1.3J UN0450........... II............ 1.3J.......... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 5............. 25, 23E fueled, with inert head. Torpedoes, liquid 1.1J UN0449........... II............ 1.1J.......... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 5............. 25, 23E fueled, with or without bursting charge. Torpedoes with 1.1E UN0329........... II............ 1.1E.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 4............. 25 bursting charge. Torpedoes with 1.1F UN0330........... II............ 1.1F.......... ................. .............. 62............ None.......... Forbidden..... Forbidden..... 5............. 25 bursting charge. Torpedoes with 1.1D UN0451........... II............ 1.1D.......... ................. .............. 62............ 62............ Forbidden..... Forbidden..... 4............. 25 bursting charge.#

Passage 214* * * * * * * D Toy Caps.......... 1.4S NA0337........... II............ 1.4S.......... ................. None.......... 62............ None.......... 25 kg......... 100 kg........ 1............. 25 Tracers for 1.3G UN0212........... II............ 1.3G.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 3............. 25 ammunition. Tracers for 1.4G UN0306........... II............ 1.4G.......... ................. None.......... 62............ None.......... Forbidden..... 75 kg......... 2............. 25 ammunition. * * * * * * * Trimethylchlorosil 3 UN1298........... II............ 3, 8.......... A3, A7, B77, N34, None.......... 206........... 243........... Forbidden..... 5 L........... E............. 40 ane. T10, TP2, TP7, TP13. * * * * * * * Trinitro-m-cresol. 1.1D UN0216........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25, 5E * * * * * * * Trinitroaniline or 1.1D UN0153........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 Picramide. Trinitroanisole... 1.1D UN0213........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 * * * * * * * Trinitrobenzene, 1.1D UN0214........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 dry or wetted with less than 30 percent water, by mass. * * * * * * * Trinitrobenzenesul 1.1D UN0386........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25, 5E fonic acid. Trinitrobenzoic 1.1D UN0215........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 acid, dry or wetted with less than 30 percent water, by mass. * * * * * * * Trinitrochlorobenz 1.1D UN0155........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 ene or Picryl chloride.#

Passage 215* * * * * * * Trinitrofluorenone 1.1D UN0387........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 * * * * * * * Trinitronaphthalen 1.1D UN0217........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 e. Trinitrophenetole. 1.1D UN0218........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 * * * * * * * Trinitrophenol or 1.1D UN0154........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25, 5E Picric acid, dry or wetted with less than 30 percent water, by mass. * * * * * * * Trinitrophenylmeth 1.1D UN0208........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 ylnitramine or Tetryl. Trinitroresorcinol 1.1D UN0219........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25, 5E or Styphnic acid, dry or wetted with less than 20 percent water, or mixture of alcohol and water, by mass. Trinitroresorcinol 1.1D UN0394........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25, 5E , wetted or Styphnic acid, wetted with not less than 20 percent water, or mixture of alcohol and water by mass.#

Passage 216* * * * * * * Trinitrotoluene 1.1D UN0388........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 and Trinitrobenzene mixtures or TNT and trinitrobenzene mixtures or TNT and hexanitrostilbene mixtures or Trinitrotoluene and hexanitrostilnene mixtures. Trinitrotoluene 1.1D UN0389........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 mixtures containing Trinitrobenzene and Hexanitrostilbene or TNT mixtures containing trinitrobenzene and hexanitrostilbene. Trinitrotoluene or 1.1D UN0209........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 TNT, dry or wetted with less than 30 percent water, by mass. * * * * * * * Tritonal.......... 1.1D UN0390........... II............ 1.1D.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 * * * * * * * Urea nitrate, dry 1.1D UN0220........... II............ 1.1D.......... 119.............. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25 or wetted with less than 20 percent water, by mass. * * * * * * * Vehicle, flammable 9 UN3166........... .............. 9............. 135, A200........ 220........... 220........... 220........... Forbidden..... No limit...... A gas powered or Vehicle, fuel cell, flammable gas powered. Vehicle, flammable 9 UN3166........... .............. 9............. 135, A200........ 220........... 220........... 220........... No limit...... No limit...... A liquid powered or Vehicle, fuel cell, flammable liquid powered.#

Passage 217* * * * * * * Warheads, rocket 1.4D UN0370........... II............ 1.4D.......... ................. None.......... 62............ 62............ Forbidden..... 75 kg......... 2............. 25 with burster or expelling charge. Warheads, rocket 1.4F UN0371........... II............ 1.4F.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 5............. 25 with burster or expelling charge. Warheads, rocket 1.1D UN0286........... II............ 1.1D.......... ................. None.......... 62............ 62............ Forbidden..... Forbidden..... 4............. 25 with bursting charge. Warheads, rocket 1.2D UN0287........... II............ 1.2D.......... ................. None.......... 62............ 62............ Forbidden..... Forbidden..... 4............. 25 with bursting charge. Warheads, rocket 1.1F UN0369........... II............ 1.1F.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 5............. 25 with bursting charge. Warheads, torpedo 1.1D UN0221........... II............ 1.1D.......... ................. None.......... 62............ 62............ Forbidden..... Forbidden..... 4............. 25 with bursting charge. G Water-reactive 4.3 UN3129........... I............. 4.3, 8........ T14, TP2, TP7, None.......... 201........... 243........... Forbidden..... 1 L........... D liquid, TP13. corrosive, n.o.s. .................. ......... ................. II............ 4.3, 8........ IB1, T11, TP2, None.......... 202........... 243........... 1 L........... 5 L........... E............. 85 TP7. .................. ......... ................. III........... 4.3, 8........ IB2, T7, TP2, TP7 None.......... 203........... 242........... 5 L........... 60 L.......... E#

Passage 218* * * * * * * G Water-reactive 4.3 UN3148........... I............. 4.3........... T13, TP2, TP7, None.......... 201........... 244........... Forbidden..... 1 L........... E............. 40 liquid, n.o.s. TP41. .................. ......... ................. II............ 4.3........... IB1, T7, TP2, TP7 None.......... 202........... 243........... 1 L........... 5 L........... E............. 40 .................. ......... ................. III........... 4.3........... IB2, T7, TP2, TP7 None.......... 203........... 242........... 5 L........... 60 L.......... E............. 40 * * * * * * * Zirconium 1.3C UN0236........... II............ 1.3C.......... ................. None.......... 62............ None.......... Forbidden..... Forbidden..... 4............. 25, 5E picramate, dry or wetted with less than 20 percent water, by mass. * * * * * * * ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 0 6. In Sec. 172.102: 0 a. In paragraph (c)(1), special provisions 47, 48, 49, 118, 134, 155, and 237 are revised and special provisions 101, 222, 238, 328, 360, 361, 362 and 365 are added in numerical sequence. 0 b. In paragraph (c)(2), special provisions A60, A100 and A103 are revised and special provisions A51, A189, A191, and A200 are added in numerical sequence. 0 c. In paragraph (c)(3), special provision B120 is added in numerical sequence. 0 d. In paragraph (c)(4), Table 1 is revised. 0 e. Paragraph (c)(7)(iii) is revised. 0 f. In paragraph (c)(8)(ii), TP39, TP40 and TP41 are added in numerical sequence. 0 g. In paragraph (c)(9), W10 is added in numerical sequence. The additions and revisions read as follows:#

Passage 219* * * * * (c) * * * (1) * * * 47 Mixtures of solids that are not subject to this subchapter and flammable liquids may be transported under this entry without first applying the classification criteria of Division 4.1, provided there is no free liquid visible at the time the material is loaded or at the time the packaging or transport unit is closed. Except when the liquids are fully absorbed in solid material contained in sealed bags, for single packagings, each packaging must correspond to a design type that has passed a leakproofness test at the Packing Group II level. Small inner packagings consisting of sealed packets and articles containing less than 10 mL of a Class 3 liquid in Packing Group II or III absorbed onto a solid material are not subject to this subchapter provided there is no free liquid in the packet or article. 48 Mixtures of solids that are not subject to this subchapter and toxic liquids may be transported under this entry without first applying the classification criteria of Division 6.1, provided there is no free liquid visible at the time the material is loaded or at the time the packaging or transport unit is closed. For single packagings, each packaging must correspond to a design type that has passed a leakproofness test at the Packing Group II level. This entry may not be used for solids containing a Packing Group I liquid. 49 Mixtures of solids that are not subject to this subchapter and corrosive liquids may be transported under this entry without first applying the classification criteria of Class 8, provided there is no free liquid visible at the time the material is loaded or at the time the packaging or transport unit is closed. For single packagings, each packaging must correspond to a design type that has passed a leakproofness test at the Packing Group II level. * * * * * 101 The name of the particular substance or article must be specified. * * * * * 118 This substance may not be transported under the provisions of Division 4.1 unless specifically authorized by the Associate Administrator (see UN0143 or UN0150 as appropriate). * * * * * 134 This entry only applies to vehicles powered by wet batteries, sodium batteries, or lithium batteries and equipment powered by wet batteries or sodium batteries that are transported with these batteries installed. For the purpose of this special provision, vehicles are self-propelled a#

Passage 220pparatus designed to carry one or more persons or goods. Examples of such vehicles are electrically-powered cars, motorcycles, scooters, three- and four-wheeled vehicles or motorcycles, battery-assisted bicycles, lawn tractors, boats, aircraft, wheelchairs and other mobility aids. Examples of equipment are lawnmowers, cleaning machines or model boats and model aircraft. Equipment powered by lithium batteries must be consigned under the entries ``Lithium batteries contained in equipment'' or ``Lithium batteries packed with equipment,'' as appropriate. Self-propelled vehicles that also contain an internal combustion engine must be consigned under the entry ``Engine, internal combustion, flammable gas powered'' or ``Engine, internal combustion, flammable liquid powered'' or ``Vehicle, flammable gas powered'' or ``Vehicle, flammable liquid powered,'' as appropriate. These entries include hybrid electric vehicles powered by both an internal combustion engine and batteries. Additionally, self-propelled vehicles or equipment that contain a fuel cell engine must be consigned under the entries ``Engine, fuel cell, flammable gas powered'' or ``Engine, fuel cell, flammable liquid powered'' or ``Vehicle, fuel cell, flammable gas powered'' or ``Vehicle, fuel cell, flammable liquid powered,'' as appropriate. These entries include hybrid electric vehicles powered by a fuel cell engine, an internal combustion engine, and batteries. * * * * * 155 Fish meal, fish scrap and krill meal may not be transported if the temperature at the time of loading either exceeds 35 [deg]C (95 [deg]F), or exceeds 5 [deg]C (41 [deg]F) above the ambient temperature, whichever is higher. * * * * * 222 Shipments offered for transportation by aircraft may not be reclassed as ORM-D. 237 ``Batteries, dry, containing potassium hydroxide solid, electric storage'' must be prepared and packaged in accordance with the requirements of Sec. 173.159(a) and (c). For transportation by aircraft, the provisions of Sec. 173.159(b)(2) apply. This entry may only be used for the transport of non-activated batteries that contain dry potassium hydroxide and that are intended to be activated prior to use by the addition of an appropriate amount of water to the individual cells. 238 Neutron radiation detectors: a. Neutron radiation detectors containing non-pressurized boron trifluoride gas in excess of 1 gram and radiat#

Passage 221ion detection systems containing such neutron radiation detectors as components may be transported by highway, rail, vessel, or cargo aircraft in accordance with the following: (1) The pressure in each neutron radiation detector must not exceed 105 kPa absolute at 20 [deg]C; (2) The amount of gas must not exceed 12.8 grams per detector and the amount per outer packaging or per radiation detection system must not exceed 51.2 grams; (3) Each neutron radiation detector must be of welded metal construction with brazed metal to ceramic feed through assemblies. They must have a minimum burst pressure of 1800 kPa; and (4) Each neutron radiation detector must be packed in a sealed intermediate plastic liner with sufficient absorbent material to absorb the entire gas contents. Neutron radiation detectors must be packed in strong outer packagings that are capable of withstanding a 1.8 meter (6-foot) drop without leakage. Radiation detection systems containing neutron radiation detectors must also include absorbent material sufficient to absorb the entire gas contents of the neutron radiation detectors. Absorbent material must be surrounded by a liner or liners, as appropriate. They must be packed in strong outer packagings unless neutron radiation detectors are afforded equivalent protection by the radiation detection system. b. Except for transportation by aircraft, neutron radiation detectors and#

Passage 222radiation detection systems containing such detectors transported in accordance with paragraph (a) of this special provision are not subject to the labeling and placarding requirements of part 172 of this subchapter. c. When transported by highway, rail, vessel, or as cargo on an aircraft, neutron radiation detectors containing not more than 1 gram of boron trifluoride, including those with solder glass joints, and radiation detection systems containing such detectors, where the neutron radiation detectors meet and are packed in accordance with the requirements of paragraph (a) of this special provision, are not subject to any other requirements of this subchapter. * * * * * 328 When lithium cells or batteries are contained in the fuel cell system, the item must be described under this entry and the entry ``Lithium batteries, contained in equipment''. * * * * * 360 Vehicles only powered by lithium batteries must be assigned the identification number UN3171. 361 Capacitors with an energy storage capacity of 0.3 Wh or less are not subject to the requirements of this subchapter. Energy storage capacity means the energy held by a capacitor, as calculated using the nominal voltage and capacitance. This entry does not apply to capacitors that by design maintain a terminal voltage (e.g., asymmetrical capacitors.) 362 This entry applies to liquids, pastes or powders, pressurized with a propellant that meets the definition of a gas in Sec. 173.115. A chemical under pressure packaged in an aerosol dispenser must be transported under UN1950. The chemical under pressure must be classed based on the hazard characteristics of the components in the propellant; the liquid; or the solid. The following provisions also apply: (a) If one of the components, which can be a pure substance or a mixture, is classed as flammable, the chemical under pressure must be classed as flammable in Division 2.1. Flammable components are flammable liquids and liquid mixtures, flammable solids and solid mixtures or flammable gases and gas mixtures meeting the following criteria: (i) A flammable liquid is a liquid having a flashpoint of not more than 93 [deg]C (200 [deg]F); (ii) A flammable solid is a solid that meets the criteria in Sec. 173.124 of this subchapter; or (iii) A flammable gas is a gas that meets the criteria in Sec. 173.115 of this subchapter. (b) Gases of Division 2.3 and gases wi#

Passage 223th a subsidiary risk of 5.1 must not be used as a propellant in a chemical under pressure. (c) Where the liquid or solid components are classed as Division 6.1, packing groups II or III, or Class 8, packing groups II or III, the chemical under pressure must be assigned a subsidiary risk of Division 6.1 or Class 8 and the appropriate identification number must be assigned. Components classed as Division 6.1, packing group I, or Class 8, packing group I, must not be offered for transportation and transported under this description. (d) A chemical under pressure with components meeting the properties of : Class 1 (explosives); Class 3 (liquid desensitized explosives); Division 4.1 (self-reactive substances and solid desensitized explosives); Division 4.2 (substances liable to spontaneous combustion); Division 4.3 (substances which, in contact with water, emit flammable gases or toxic gases); Division 5.1 (oxidizing substances); Division 5.2 (organic peroxides); Division 6.2 (Infectious substances); or, Class 7 (Radioactive material), must not be offered for transportation under this description. (e) A description to which Special provision 170 or TP7 is assigned in Column 7 of the Sec. 172.101 Hazardous Materials Table, and therefore requires air to be eliminated from the package vapor space by nitrogen or other means, must not be offered for transportation under this description. 365 For manufactured instruments and articles containing mercury, see UN3506. (2) * * * * * * * * A51 Irrespective of the quantity limitations specified in Column (9A) of the Sec. 172.101 Table or Sec. 175.75(c), the following aircraft batteries may be transported on passenger aircraft as cargo: a. Wet cell batteries, UN 2794 or UN 2795, up to a limit of 100kg net mass per package; b. Lithium ion batteries, UN 3090, packages containing a single aircraft battery with a net mass not exceeding 35kg; and c. Transport in accordance with this special provision must be noted on the dangerous goods transport document. * * * * * A60 Sterilization devices, when containing less than 30 mL per inner packaging with not more than 150 mL per outer packaging, may be transported in accordance with the provisions in Sec. 173.4a, irrespective of Sec. 173.4a(b), provided such packagings were first subjected to comparative fire testing. Comparative fire testing between a package as prepared for transport#

Passage 224(including the substance to be transported) and an identical package filled with water must show that the maximum temperature measured inside the packages during testing does not differ by more than 200 [deg]C (392 [deg]F). Packagings may include a vent to permit the slow escape of gas (i.e. not more than 0.1 mL/hour per 30 mL inner packaging at 20 [deg]C (68 [deg]F) produced from gradual decomposition. * * * * * A100 Primary (non-rechargeable) lithium batteries and cells are forbidden for transport aboard passenger-carrying aircraft. Secondary (rechargeable) lithium batteries and cells are authorized aboard passenger-carrying aircraft provided the net weight of lithium batteries does not exceed 5 kg (11 pounds) per package. * * * * * A103 Equipment is authorized aboard passenger-carrying aircraft provided the net weight of lithium batteries does not exceed 5 kg (11 pounds) per package. * * * * * A189 Except where the defining criteria of another class or division are met, concentrations of formaldehyde solution: a. With less than 25 percent but not less than 10 percent formaldehyde, must be described as UN3334, Aviation regulated liquid, n.o.s.; and b. With less than 10 percent formaldehyde, are not subject to this subchapter. * * * * * A191 Notwithstanding the Division 6.1 subsidiary risk for this description, the toxic subsidiary risk label and the requirement to indicate the subsidiary risk on the shipping paper are not required for manufactured articles containing less than 5 kg (11 pounds) of mercury. * * * * * A200 These articles must be transported as cargo and may not be carried aboard an aircraft by passengers or crewmembers in carry-on baggage, checked baggage, or on their person unless specifically authorized in Sec. 175.10. * * * * * (3) * * * * * * * * B120 The use of flexible bulk containers conforming to the requirements in subpart R and subpart S of part 178 of this subchapter is permitted. * * * * * (4) * * *#

Passage 225Table 1--IB Codes (IBC Codes) ------------------------------------------------------------------------ IBC code Authorized IBCs ------------------------------------------------------------------------ IB1............................... Authorized IBCs: Metal (31A, 31B and 31N). Additional Requirement: Only liquids with a vapor pressure less than or equal to 110 kPa at 50 [deg]C (1.1 bar at 122 [deg]F), or 130 kPa at 55 [deg]C (1.3 bar at 131 [deg]F) are authorized. IB2............................... Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite (31HZ1). Additional Requirement: Only liquids with a vapor pressure less than or equal to 110 kPa at 50 [deg]C (1.1 bar at 122 [deg]F), or 130 kPa at 55 [deg]C (1.3 bar at 131 [deg]F) are authorized. IB3............................... Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite (31HZ1 and 31HA2, 31HB2, 31HN2, 31HD2 and 31HH2). Additional Requirement: Only liquids with a vapor pressure less than or equal to 110 kPa at 50 [deg]C (1.1 bar at 122 [deg]F), or 130 kPa at 55 [deg]C (1.3 bar at 131 [deg]F) are authorized, except for UN2672 (also see Special provision IP8 in Table 2 for UN2672). IB4............................... Authorized IBCs: Metal (11A, 11B, 11N, 21A, 21B and 21N). IB5............................... Authorized IBCs: Metal (11A, 11B, 11N, 21A, 21B and 21N); Rigid plastics (11H1, 11H2, 21H1, and 21H2); Composite (11HZ1and 21HZ1). IB6............................... Authorized IBCs: Metal (11A, 11B, 11N, 21A, 21B and 21N); Rigid plastics (11H1, 11H2, 21H1, and 21H2); Composite (11HZ1, 11HZ2, 21HZ1, and 21HZ2). Additional Requirement: Composite IBCs 11HZ2 and 21HZ2 may not be used when the hazardous materials being transported may become liquid during transport. IB7............................... Authorized IBCs: Metal (11A, 11B, 11N, 21A, 21B and 21N); Rigid plastics (11H1, 11H2, 21H1, and 21H2); Composite (11HZ1, 11HZ2, 21HZ1, and 21HZ2); Wooden (11C, 11D and 11F). Additional Requirement: Liners of wooden IBCs must be sift-proof. IB8............................... Authorized IBCs: Metal (11A, 11B, 11N, 21A, 21B and 21N); Rigid plastics (11H1, 11H2, 21H1, and 21H2); Composite (11HZ1, 11HZ2, 21HZ1, and 21HZ2); Fiberboard (11G); Wooden (11C, 11D and 11F); Flexible (13H1, 13H2, 13H3, 13H4, 13H5, 13L1, 13L2, 13L3, 13L4, 13M1 or 13M2).#

Passage 226IB9............................... IBCs are only authorized if approved by the Associate Administrator. ------------------------------------------------------------------------ * * * * * (7) * * * * * * * * (iii) T50 When portable tank instruction T50 is indicated in Column (7) of the Sec. 172.101 Hazardous Materials Table, the applicable liquefied compressed gas and chemical under pressure descriptions are authorized to be transported in portable tanks in accordance with the requirements of Sec. 173.313 of this subchapter. * * * * * (8) * * * (ii) * * * * * * * * TP39 The portable tank instruction T4 prescribed may continue to be applied until December 31, 2018. TP40 The portable tank must not be transported when connected with spray application equipment. TP41 The portable tank instruction T9 may continue to be applied until December 31, 2018. * * * * * (9) * * * * * * * * W10 When offered for transportation by vessel, the use of Large Packagings (see Sec. 171.8 of this subchapter) is prohibited. * * * * * 0 7. In Sec. 172.202, paragraph (a)(6)(vii) is added: Sec. 172.202 Description of hazardous material on shipping papers. (a) * * * (6) * * * (vii) For hazardous materials in limited quantities with a 30 kg gross mass limit in Column (9A) or (9B) of the Sec. 172.101 Hazardous Materials Table, where different hazardous materials are packed together in the same outer packaging, the net quantity of each hazardous material followed by the gross mass of the completed package is indicated and: * * * * * 0 8. In Sec. 172.203, paragraph (i)(3) is revised to read as follows: Sec. 172.203 Additional description requirements. * * * * * (i) * * * (3) For a hazardous material consigned under an ``n.o.s.'' entry not included in the segregation groups listed in section 3.1.4 of the IMDG Code (IBR see Sec. 171.7 of this subchapter) but belonging, in the opinion of the consignor, to one of these groups, the appropriate segregation group must be shown in association with the basic description (for example, IMDG Code segregation group--1 Acids). When no segregation group is applicable, there is no requirement to indicate that condition. * * * * * 0 9. In Sec. 172.301, paragraph (a)(1) is revised to read as follows: Sec. 172.301 General marking requirements for non-bulk packagings.#

Passage 227(a) Proper shipping name and identification number. (1) Except as otherwise provided by this subchapter, each person who offers a hazardous material for transportation in a non-bulk packaging must mark the package with the proper shipping name and identification number (preceded by ``UN'', ``NA'' or ``ID,'' as appropriate) for the material as shown in the Sec. 172.101 Hazardous Materials Table. The identification number marking preceded by ``UN'', ``NA'', or ``ID'' as appropriate must be marked in characters at least 12 mm (0.47 inches) high. Packages with a maximum capacity of 30 liters (8 gallons) or less, 30 kg (66 pounds) maximum net mass, or cylinders with a water capacity of 60 liters (16 gallons) or less must be marked with characters at least 6 mm (0.24 inches) high. Packages with a maximum capacity of 5 liters (1.32 gallons) or 5 kg (11 pounds) or less must be marked in a size appropriate for the size of the package. (i) Transitional exception. For domestic transportation, until January 1, 2017, the identification number markings are not subject to the minimum size requirements specified in paragraph this (a)(1). (ii) Exception for permanently marked packagings. For domestic transportation, a packaging manufactured prior to January 1, 2017 and permanently marked (e.g., by embossing or through a heat stamp process) with the appropriate identification number marking may continue in service until the end of its useful life regardless of whether the identification number markings meet the minimum size requirements specified in this paragraph (a)(1). * * * * * 0 11. In Sec. 172.312, paragraph (c)(3) is revised to read as follows: Sec. 172.312 Liquid hazardous materials in non-bulk packagings. * * * * * (c) * * * (3) When offered or intended for transportation by aircraft, packages containing liquid hazardous materials in inner packagings of 120 mL (4 fluid oz.) or less when packed with sufficient absorption material between the inner and outer packagings to completely absorb the liquid contents. * * * * * 0 12. In Sec. 172.407, paragraph (f) is revised to read as follows;#

Passage 228* * * * * (f) Exceptions. Except for materials poisonous by inhalation (See Sec. 171.8 of this subchapter), a label conforming to specifications in the UN Recommendations (IBR, see Sec. 171.7 of this subchapter) may be used in place of a corresponding label that conforms to the requirements of this subpart. * * * * * 0 13. In Sec. 172.604, paragraph (d)(2) is revised to read as follows. Sec. 172.604 Emergency response telephone number. * * * * * (d) * * * (2) Materials properly described under the following shipping names: Battery powered equipment. Battery powered vehicle. Carbon dioxide, solid. Castor bean. Castor flake. Castor meal. Castor pomace. Consumer commodity. Dry ice. Engines, internal combustion. Fish meal, stabilized. Fish scrap, stabilized. Krill Meal, PG III. Refrigerating machine. Vehicle, flammable gas powered. Vehicle, flammable liquid powered. Wheelchair, electric. * * * * * PART 173--SHIPPERS--GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS 0 14. The authority citation for part 173 continues to read as follows: Authority: 49 U.S.C. 5101-5128, 44701; 49 CFR 1.45, 1.53. 0 15. In Sec. 173.4b, paragraph (b)(8) is revised to read as follows: * * * * * (b) * * * (8) Restrictions. Except as provided in Sec. 175.10, for transportation by aircraft, hazardous material packaged in accordance with this section may not be carried in checked or carry-on baggage by a passenger or crew member. 0 16. In Sec. 173.12, paragraph (b)(2)(ii)(A) is revised to read as follows: Sec. 173.12 Exceptions for shipments of waste materials. * * * * * (b) * * * (2) * * * (ii) * * * (A) A UN 1A2, UN 1B2 or UN 1N2 metal drum, a UN 1D plywood drum, a UN 1G fiber drum, or a UN 1H2 plastic drum, tested and marked to at least the Packing Group III performance level for liquids or solids; * * * * * 0 17. In Sec. 173.21, paragraph (f)(3)(ii) is revised to read as follows: Sec. 173.21 Forbidden materials and packages. * * * * * (f) * * * (3) * * * (ii) For transportation by vessel, shipments are authorized in accordance with the control temperature requirements in 7.3.7 of the IMDG Code (IBR, see Sec. 171.7 of this subchapter). * * * * * 0 18. Section Sec. 173.37 is added to read as follows: Sec. 173.37 Hazardous Materials in Flexible Bulk Containers.#

Passage 229(a) No person may offer or accept a hazardous material for transportation in a Flexible Bulk Container except as authorized by this subchapter. Each Flexible Bulk Container used for the transportation of hazardous materials must conform to the requirements of its specification and regulations for the transportation of the particular commodity. (b) Initial use and reuse of Flexible Bulk Containers. A Flexible Bulk Container may be reused. Before a Flexible Bulk Container is filled and offered for transportation, the Flexible Bulk Container must be given an external visual inspection by the person filling the Flexible Bulk Container to ensure: (1) The Flexible Bulk Container is free from corrosion, contamination, cracks, cuts, or other damage that would render it unable to pass the prescribed design type test to which it is certified and marked; and (2) The Flexible Bulk Container is marked in accordance with requirements in Sec. 178.1010 of this subchapter. Required markings that are missing, damaged or difficult to read must be restored or returned to original condition. (3) The following components must be examined to determine structural serviceability: (i) Textile slings; (ii) Load-bearing structure straps; (iii) Body fabric; and (iv) Lock device parts including metal and textile parts are free from protrusions or damage. (4) The use of Flexible Bulk Containers for the transport of hazardous materials is permitted for a period not to exceed two years from the date of manufacture of the Flexible Bulk Container. (c) During transportation-- (1) No hazardous material may remain on the outside of the Flexible Bulk Container; and (2) Each Flexible Bulk Container must be securely fastened to or contained within the transport unit. (3) If restraints such as banding or straps are used, these straps must not be over-tightened to an extent that causes damage or deformation to the Flexible Bulk Container. (4) Flexible Bulk Containers must be transported in a conveyance with rigid sides and ends that extend at least two-thirds of the height of the Flexible Bulk Container. (5) Flexible Bulk Containers must not be stacked for highway or rail transportation. (6) Flexible Bulk Containers must not be transported in cargo transport units when offered for transportation by vessel. (7) Flexible Bulk Containers when transported by barge must be stowed in such a way that there#

Passage 230are no void spaces between the Flexible Bulk Containers in the barge. If the Flexible Bulk Containers do not completely fill the barge, adequate measures must be taken to avoid shifting of cargo. The maximum permissible height of the stack of Flexible Bulk Containers must not exceed 3 containers high. (d) A Flexible Bulk Container used to transport hazardous materials may not exceed 15 cubic meters (530 cubic feet) capacity. 0 19. In Sec. 173.50, paragraph (b)(6) is revised as follows. * * * * * (b) * * * (6) Division 1.6 \2\ consists of extremely insensitive articles that do not have a mass explosion hazard. This division is comprised of articles that contain only extremely insensitive substances and that demonstrate a negligible probability of accidental initiation or propagation. \2\ The risk from articles of Division 1.6 is limited to the explosion of a single article. 0 20. In Sec. 173.52, in paragraph (b), in Table 1, the entry in the twelfth row is revised to read as follows: Sec. 173.52 Classification codes and compatibility groups of explosives. Table 1--Classification Codes ------------------------------------------------------------------------ Description of substances or article Compatibility Classification to be classified group code ------------------------------------------------------------------------ * * * * * * * Articles containing only extremely N 1.6N insensitive substances............... * * * * * * * ------------------------------------------------------------------------ 0 21. In Sec. 173.56 paragraph (h)(2) is revised to read as follows: * * * * * (h) * * * (2) Ammunition for rifle, pistol, shotgun, or tools; * * * * * 0 22. In Sec. 173.59: 0 a. The word ``detonating'' is removed from the definition of Articles, explosive, extremely insensitive (Articles, EEI). 0 b. The definition of Auxiliary explosive component, isolated is added. 0 c. The definition of ``Cartridges, blank'' is revised. 0 d. The definition of ``Explosive, extremely insensitive detonating substance (EIDS)'' is removed. 0 e. The definition of ``Explosive, extremely insensitive substance (EIS)'' is added. The revision and additions are as follows: Sec. 173.59 Description for explosive terms.#

Passage 231* * * * * Auxiliary explosive component, isolated. A small device that explosively performs an operation related to the article's functioning, other than its main explosive loads' performance. Functioning of the component does not cause any reaction of the main explosive loads contained within the article. * * * * * Cartridges, blank. Articles that consist of a cartridge case with a center or rim fire primer and a confined charge of smokeless or black powder, but no projectile. Used in training, saluting, or in starter pistols, tools, etc. * * * * * Explosive, extremely insensitive substance (EIS). A substance that has demonstrated through tests that it is so insensitive that there is very little probability of accidental initiation. * * * * * 0 23. In Sec. 173.62, in paragraph (c), in the Table of Packing Methods, Packing Instructions 110(a), 111, 112(a), 112(b), 112(c), 113, 114(a), 114(b), 115, 116, 117, 130, 131, 132(a), 132(b), 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143 and 144 are revised to read as follows: Sec. 173.62 Specific packaging requirements for explosives. Table of Packing Methods ---------------------------------------------------------------------------------------------------------------- Packing instruction Inner packagings Intermediate packagings Outer packagings ---------------------------------------------------------------------------------------------------------------- * * * * * * * 110(a)............................... Bags................... Bags................... Drums. PARTICULAR PACKING REQUIREMENTS OR plastics, plastics, steel (1A1 or 1A2). EXCEPTIONS: textile, plastic coated textile, plastic coated other metal (1N1 or 1. The Intermediate packagings must or lined. or lined. 1N2). be filled with water saturated rubber................. rubber................. plastics-(1H1 or 1H2). material such as an anti-freeze textile, rubberized.... textile, rubberized-... solution or wetted cushioning textile................ Receptacles............ 2. Outer packagings must be filled Receptacles............ plastics............... with water saturated material such wood................... metal.................. as an anti-freeze solution or wetted wood................... cushioning. Outer packagings must be constructed and sealed to prevent evaporation of the wetting solution, except when 0224 is being carried dry#

Passage 232* * * * * * * 111.................................. Bags................... Not necessary.......... Boxes. PARTICULAR PACKING REQUIREMENTS OR paper, waterproofed steel (4A). EXCEPTIONS: plastics............... aluminum (4B). For UN0159, inner packagings are not textile, rubberized.... other metal (4N). required when metal (1A1, 1A2, 1B1, Sheets................. natural wood, ordinary 1B2, 1N1 or 1N2) or plastics (1H1 or plastics............... (4C1). 1H2) drums are used as outer textile, rubberized.... natural wood, sift packagings Receptacles............ proof (4C2). wood................... plywood (4D). reconstituted wood (4F). fiberboard (4G). plastics, expanded (4H1). plastics, solid (4H2). Drums steel (1A1 or 1A2). aluminum (1B1 or 1B2). other metal (1N1 or 1N2). plywood (1D). fiberboard (1G). plastics (1H1 or 1H2). 112(a)............................... Bags................... Bags................... Boxes. PARTICULAR PACKING REQUIREMENTS OR paper, multiwall, water plastics steel (4A). EXCEPTIONS: resistant textile, plastic coated aluminum (4B). 1. For UN Nos. 0004, 0076, 0078, plastics............... or lined. other metal (4N). 0154, 0219 and 0394, packagings must textile................ Receptacles............ natural wood, ordinary be lead free textile, rubberized.... metal.................. (4C1). 2. Intermediate packagings are not woven plastics......... plastics............... natural wood, sift required if leakproof drums are used Receptacles............ wood................... proof (4C2). as the outer packaging metal.................. plywood (4D). 3. For UN0072 and UN0226, plastics............... reconstituted wood intermediate packagings are not wood................... (4F). required fiberboard (4G). plastics, expanded (4H1). plastics, solid (4H2). Drums steel (1A1 or 1A2). aluminum (1B1 or 1B2). other metal (1N1 or 1N2). plywood (1D). fiber (1G). plastics (1H1 or 1H2). 112(b)............................... Bags................... Bags................... Boxes.#

Passage 233This packing instruction applies to paper, Kraft (for UN0150 only) woven plastics sift- dry solids other than powders paper, multiwall, water plastics............... proof (5H2/3). PARTICULAR PACKING REQUIREMENTS OR resistant. textile, plastic coated plastics, film (5H4). EXCEPTIONS: plastics............... or lined. textile, sift-proof 1. For UN 0004, 0076, 0078, 0154, textile................ (5L2). 0216, 0219 and 0386, packagings must textile, rubberized textile, water be lead free plastics. resistant (5L3). 2. For UN0209, bags, sift-proof (5H2) woven plastics......... paper, multiwall, water are recommended for flake or prilled resistant (5M2). TNT in the dry state and a maximum Boxes net mass of 30 kg. steel (4A). 3. For UN0222, inner packagings are aluminum (4B). not required other metal (4N). natural wood, ordinary (4C1). natural wood, sift proof (4C2). plywood (4D) reconstituted wood (4F). fiberboard (4G). plastics, expanded (4H1). plastics, solid (4H2). Drums steel (1A1 or 1A2). aluminum (1B1 or 1B2). plywood (1D). other metal (1N1 or 1N2). fiber (1G). plastics (1H1 or 1H2). 112(c) This packing instruction Bags................... Bags................... Boxes. applies to solid dry powders. PARTICULAR PACKING REQUIREMENTS OR paper, multiwall, water paper, multiwall, water steel (4A). EXCEPTIONS: resistant resistant with inner aluminum (4B). 1. For UN 0004, 0076, 0078, 0154, plastics............... lining other metal (4N). 0216, 0219 and 0386, packagings must woven plastics......... plastics............... natural wood, be lead free Receptacles............ Receptacles............ ordinary (4C1). 2. For UN0209, bags, sift-proof (5H2) fiberboard............. metal.................. natural wood, are recommended for flake or prilled metal.................. plastics............... sift proof (4C2). TNT in the dry state. Bags must not plastics............... wood................... plywood (4D). exceed a maximum net mass of 30 kg. wood................... reconstituted wood 3. Inner packagings are not required (4F). if drums are used as the outer fiberboard (4G). packaging. plastics, solid (4H2). 4. At least one of the packagings Drums. must be sift-proof plastics (1H1 or 1H2). steel (1A1 or 1A2). aluminum (1B1 or 1B2). other metal (1N1 or 1N2). plywood (1D). fiber (1G). 113.................................. Bags................... Not necessary.......... Bo#

Passage 234PARTICULAR PACKING REQUIREMENTS OR paper steel (4A). EXCEPTIONS: plastics............... aluminum (4B). 1. For UN0094 and UN0305, no more textile, rubberized.... other metal (4N). than 50 g of substance must be Receptacles............ natural wood, ordinary packed in an inner packaging fiberboard............. (4C1). 2. For UN0027, inner packagings are metal.................. natural wood, sift- not necessary when drums are used as plastics............... proof walls (4C2). the outer packaging wood................... plywood (4D). 3. At least one of the packagings Sheets................. reconstituted wood must be sift-proof paper, kraft........... (4F). 4. Sheets must only be used for paper, waxed........... fiberboard (4G). UN0028 plastics, solid (4H2). Drums plastics (1H1 or 1H2). steel (1A1 or 1A2). aluminum-(1B1 or 1B2). other metal (1N1 or 1N2). plywood (1D). fiber (1G). 114(a)............................... Bags................... Bags................... Boxes This packing instruction applies to plastics plastics steel (4A). wetted solids textile................ textile, plastic coated other metal (4N). PARTICULAR PACKING REQUIREMENTS OR woven plastics......... or lined. natural wood, ordinary EXCEPTIONS: Receptacles............ Receptacles............ (4C1). 1. For UN 0077, 0234, 0235 and 0236, metal.................. metal.................. natural wood, sift packagings must be lead free plastics............... plastics............... proof walls (4C2). 2. For UN0342, inner packagings are wood................... Dividing partitions.... plywood (4D). not required when metal (1A1, 1A2, wood................... reconstituted wood 1B1, 1B2, 1N1 or 1N2) or plastics (4F). (1H1 or 1H2) drums are used as outer fiberboard (4G). packagings plastics, solid (4H2). 3. Intermediate packagings are not Drums. required if leakproof removable head steel (1A1 or 1A2). drums are used as the outer aluminum (1B1 or 1B2). packaging other metal (1N1 or 1N2) plywood (1D). fiber (1G). plastics (1H1 or 1H2). 114(b)............................... Bags................... Not necessary.......... Boxes PARTICULAR PACKING REQUIREMENTS OR paper, kraft natural wood, EXCEPTIONS: plastics............... ordinary (4C1). 1. For UN Nos. 0077, 0132, 0234, 0235 textile, sift-proof.... natural wood, sift- and 0236, packagings must be lead woven plastics, sift- proof walls (4C2). free proof..#

Passage 235plywood (4D). 2. For UN0160 and UN0161, when metal Receptacles............ reconstituted wood drums (1A2, 1B2 or 1N2) are used as fiberboard............. (4F). the outer packaging, metal metal.................. fiberboard (4G). packagings must be so constructed paper.................. Drums. that the risk of explosion, by plastics............... steel (1A1 or 1A2). reason of increased internal wood................... aluminum (1B1 or 1B2). pressure from internal or external woven plastics, sift- other metal (1N1 or causes, is prevented proof.. 1N2). 3. For UN0160, UN0161, and UN0508, plywood (1D). inner packagings are not necessary fiber (1G). if drums are used as the outer plastics (1H1 or 1H2). packaging 4. For UN0508 and UN0509, metal packagings must not be used 115.................................. Receptacles............ Bags................... Boxes#

Passage 236PARTICULAR PACKING REQUIREMENTS OR metal plastics in metal natural wood, EXCEPTIONS: plastics............... receptacles ordinary (4C1). 1. For liquid explosives, inner wood................... Drums.................. natural wood, sift packagings must be surrounded with metal.................. proof walls (4C2). non-combustible absorbent cushioning Receptacles............ plywood (4D). material in sufficient quantity to wood................... reconstituted wood absorb the entire liquid content. (4F). Metal receptacles should be fiberboard (4G). cushioned from each other. The net Drums. mass of explosive per package may plastics (1H1 or 1H2). not exceed 30 kg when boxes are used steel (1A1 or 1A2). as outer packaging. The net volume aluminum (1B1 or 1B2). of explosive in each package other other metal (1N1 or than boxes must not exceed 120 1N2). liters plywood (1D). 2. For UN 0075, 0143, 0495 and 0497 fiber (1G). when boxes are used as the outer Specification MC-200 packaging, inner packagings must containers may be used have taped screw cap closures and be for transport by motor not more than 5 liters capacity vehicle. each. A composite packaging consisting of a plastic receptacle in a metal drum (6HA1) may be used in lieu of combination packagings. Liquid substances must not freeze at temperatures above -15 [deg]C (+5 [deg]F) 3. For UN0144, intermediate packagings are not necessary. Aluminum drums (1B1 and 1B2) and metal, other than steel or aluminum, drums (1N1 and 1N2) must not be used. 116.................................. Bags................... Not Necessary.......... Bags PARTICULAR PACKING REQUIREMENTS OR Bags Not necessary.......... Bags. EXCEPTIONS: paper, water and oil... woven plastics (5H1/2/ 1. For UN 0082, 0241, 0331 and 0332, resistant.............. 3). inner packagings are not necessary plastics............... paper, multiwall, water if leakproof removable head drums textile, plastic coated resistant (5M2). are used as the outer packaging or. plastics, film (5H4). 2. For UN 0082, 0241, 0331 and 0332, lined.................. textile, sift-proof inner packagings are not required woven plastics, sift- (5L2). when the explosive is contained in a proof. textile, water material impervious to liquid Receptacles............ resistant (5L3). 3. For UN0081, inner packagings are fiberboard, water Boxes. not required when contained in rigid resistant.#

Passage 237steel (4A). plastic that is impervious to nitric metal.................. aluminum (4B). esters plastics............... other metal (4N). 4. For UN0331, inner packagings are wood, sift-proof....... wood, natural, ordinary not required when bags (5H2), (5H3) Sheets................. (4C1). or (5H4) are used as outer paper, water resistant. natural wood, sift packagings paper, waxed........... proof walls (4C2). 5. Bags (5H2 or 5H3) must be used plastics............... plywood (4D). only for UN0082, 0241, 0331 and 0332 reconstituted wood 6. For UN0081, bags must not be used (4F). as outer packagings fiberboard (4G). plastics, solid (4H2). Drums. steel (1A1 or 1A2). aluminum (1B1 or 1B2). other metal (1N1 or 1N2). plywood (1D). fiber (1G). plastics (1H1 or 1H2). Jerricans. steel (3A1 or 3A2). plastics (3H1 or 3H2). 117.................................. Not necessary.......... Not necessary.......... IBCs.#

Passage 238PARTICULAR PACKING REQUIREMENTS OR metal (11A), (11B), EXCEPTIONS: (11N), (21A), 1. This packing instruction may only (21B), (21N), be used for explosives of UN0082 (31A), (31B), when they are mixtures of ammonium (31N). nitrate or other inorganic nitrates flexible (13H2), with other combustible substances (13H3), (13H4), that are not explosive ingredients. (13L2), (13L3), Such explosives must not contain (13L4), (13M2). nitroglycerin, similar liquid rigid plastics (11H1), organic nitrates, liquid or solid (11H2), (21H1), nitrocarbons, or chlorates. (21H2), (31H1), 2. This packing instruction may only (31H2). be used for explosives of UN0241 composite (11HZ1), that consist of water as an (11HZ2), (21HZ1), essential ingredient and high (21HZ2), (31HZ1), proportions of ammonium nitrate or (31HZ2). other oxidizers, some or all of which are in solution. The other constituents may include hydrocarbons or aluminum powder, but must not include nitro-derivatives such as trinitrotoluene. 3. Metal IBCs must not be used for UN0082 and UN 0241. 4. Flexible IBCs may only be used for solids. 130.................................. Not necessary.......... Not necessary.......... Boxes Particular Packaging Requirements: Steel (4A). 1. The following applies to UN 0006, Aluminum (4B). 0009, 0010, 0015, 0016, 0018, 0019, Other metal (4N). 0034, 0035, 0038, 0039, 0048, 0056, Wood natural, ordinary 0137, 0138, 0168, 0169, 0171, 0181, (4C1). 0182, 0183, 0186, 0221, 0238, 0243, Wood natural, sift- 0244, 0245, 0246, 0254, 0280, 0281, proof walls (4C2). 0286, 0287, 0297, 0299, 0300, 0301, Plywood (4D). 0303, 0321, 0328, 0329, 0344, 0345, Reconstituted wood 0346, 0347, 0362, 0363, 0370, 0412, (4F). 0424, 0425, 0434, 0435, 0436, 0437, Fiberboard (4G). 0438, 0451, 0459 and 0488. Large and Plastics, expanded robust explosives articles, normally (4H1). intended for military use, without Plastics, solid (4H2). their means of initiation or with Drums. their means of initiation containing Steel (1A1 or 1A2). at least two effective protective Aluminum (1B1 or 1B2). features, may be carried unpackaged. Other metal (1N1 or When such articles have propelling 1N2). charges or are self-propelled, their Plywood (1D). ignition systems must be protected Fiber (1G). against stimuli encountered during Plastics (1H1 or 1H2). normal conditions of transport. A Large Packagings. negative result in Test Seri#

Passage 239es 4 on Steel (50A). an unpackaged article indicates that Aluminum (50B). the article can be considered for Metal other than steel transport unpackaged. Such or aluminum (50N). unpackaged articles may be fixed to Rigid plastics (50H). cradles or contained in crates or Natural wood (50C). other suitable handling devices. 2. Plywood (50D). Subject to approval by the Associate Reconstituted wood Administrator, large explosive (50F). articles, as part of their Rigid fiberboard (50G). operational safety and suitability tests, subjected to testing that meets the intentions of Test Series 4 of the UN Manual of Tests and Criteria with successful test results, may be offered for transportation in accordance with the requirements of this subchapter. 131.................................. Bags................... Not Necessary.......... Boxes#

Passage 240PARTICULAR PACKING REQUIREMENTS OR paper steel (4A). EXCEPTIONS: plastics............... aluminum (4B). 1. For UN 0029, 0267 and 0455, bags Receptacles............ other metal (4N). and reels may not be used as inner fiberboard............. wood, natural, ordinary packagings metal.................. (4C1). 2. For UN 0030, 0255 and 0456, inner plastics............... natural wood, sift packagings are not required when wood................... proof walls (4C2). detonators are packed in pasteboard Reels.................. plywood (4D). tubes, or when their leg wires are reconstituted wood wound on spools with the caps either (4F). placed inside the spool or securely fiberboard (4G). taped to the wire on the spool, so Drums. as to restrict free moving of the steel (1A1 or 1A2). caps and to protect them from impact Aluminum (1B1 or 1B2). forces other metal (1N1 or 3. For UN 0360, 0361 and 0500, 1N2). detonators are not required to be Plywood (1D). attached to the safety fuse, metal- fiber (1G). clad mild detonating cord, plastics (1H1 or 1H2). detonating cord, or shock tube. Inner packagings are not required if the packing configuration restricts free moving of the caps and protects them from impact forces 132(a)............................... Not necessary.......... Not necessary.......... Boxes For articles consisting of closed steel (4A). metal, plastic or fiberboard casings aluminum (4B). that contain detonating explosives, other metal (4N). or consisting of plastics-bonded wood, natural; ordinary detonating explosives (4C1). wood, natural, sift proof walls (4C2). plywood (4D). reconstituted wood (4F). fiberboard (4G). plastics, solid (4H2). 132(b)............................... Receptacles............ Not necessary.......... Boxes For articles without closed casings fiberboard steel (4A). aluminum metal.................. (4B). plastics............... other metal (4N). wood................... wood, natural, ordinary Sheets................. (4C1). paper.................. wood, natural, sift plastics............... proof walls (4C2). plywood (4D). reconstituted wood (4F). fiberboard (4G). plastics, solid (4H2). 133.................................. Receptacles............ ....................... Boxes. PARTICULAR PACKING REQUIREMENTS OR fiberboard Intermediate packagings steel (4A). EXCEPTIONS: metal.................. are only required when aluminum (4B). 1. For#

Passage 241UN 0043, 0212, 0225, 0268 and plastics............... trays are used as other metal (4N). 0306 trays are not authorized as wood................... inner packagings. wood, natural, ordinary inner packagings Trays, fitted with Receptacles............ (4C1). dividing partitions fiberboard............. wood, natural, sift fiberboard plastics metal.................. proof walls (4C2). wood. plastics............... plywood (4D). wood................... reconstituted wood (4F). fiberboard (4G). plastics, solid (4H2). 134.................................. Bags................... Not necessary.......... Boxes.#

Passage 242water resistant steel (4A). Receptacles............ aluminum (4B). fiberboard............. other metal (4N). metal.................. wood, natural, ordinary plastics............... (4C1). wood................... wood, natural, sift Sheets................. proof walls (4C2). fiberboard, corrugated. plywood (4D). Tubes.................. reconstituted wood fiberboard............. (4F). fiberboard (4G). plastics, expanded (4H1). plastics, solid (4H2). Drums. fiberboard (1G). plastics (1H1 or 1H2). steel (1A1 or 1A2). aluminum (1B1 or 1B2). other metal (1N1 or 1N2). plywood (1D). 135.................................. Bags................... Not necessary.......... Boxes. paper steel (4A). plastics............... aluminum (4B). Receptacles............ other metal (4N). fiberboard............. wood, natural, ordinary metal.................. (4C1). plastics............... wood, natural, sift wood................... proof walls (4C2). Sheets................. plywood (4D). paper.................. reconstituted wood plastics............... (4F). fiberboard (4G). plastics, expanded (4H1). plastics, solid (4H2). Drums. steel (1A1 or 1A2). aluminum (1B1 or 1B2). other metal (1N1 or 1N2) plywood (1D). fiber (1G). plastics (1H1 or 1H2). 136.................................. Bags................... Not necessary.......... Boxes. plastics steel (4A). textile................ aluminum (4B) Boxes.................. other metal (4N). fiberboard............. wood, natural, ordinary plastics............... (4C1). wood................... wood, natural, sift Dividing partitions in proof walls (4C2). the outer packagings. plywood (4D). reconstituted wood (4F). fiberboard (4G). plastics, solid (4H2). Drums. steel (1A1 or 1A2). aluminum (1B1 or 1B2). other metal (1N1 or 1N2). plywood (1D). fiber (1G). plastics (1H1 or 1H2). 137.................................. Bags................... Not necessary.......... Boxes.#

Passage 243PARTICULAR PACKING REQUIREMENTS OR plastics steel (4A). EXCEPTIONS: Boxes.................. aluminum (4B). For UN 0059, 0439, 0440 and 0441, fiberboard............. other metal (4N). when the shaped charges are packed wood................... wood, natural, ordinary singly, the conical cavity must face Tubes.................. (4C1). downwards and the package marked fiberboard............. wood, natural, sift ``THIS SIDE UP''. When the shaped metal.................. proof walls (4C2). charges are packed in pairs, the plastics............... plywood (4D). conical cavities must face inwards Dividing partitions in reconstituted wood to minimize the jetting effect in the outer packagings. (4F). the event of accidental initiation fiberboard (4G). Drums. steel (1A1 or 1A2). aluminum (1B1 or 1B2). other metal (1N1 or 1N2). plywood (1D). fiber (1G). plastics (1H1 or 1H2). 138.................................. Bags................... Not necessary.......... Boxes. PARTICULAR PACKING REQUIREMENTS OR Plastics steel (4A). EXCEPTIONS: aluminum (4B). If the ends of the articles are other metal (4N). sealed, inner packagings are not wood, natural, ordinary necessary (4C1). wood, natural, sift proof walls (4C2). plywood (4D). reconstituted wood (4F). fiberboard (4G). plastics, solid (4H2). Drums. fiberboard (1G). plastics (1H1 or 1H2). steel (1A1 or 1A2). aluminum (1B1 or 1B2). other metal (1N1 or 1N2). 139.................................. Bags................... Not necessary.......... Boxes. PARTICULAR PACKING REQUIREMENTS OR plastics steel (4A). EXCEPTIONS: Receptacles............ aluminum (4B). 1. For UN 0065, 0102, 0104, 0289 and fiberboard............. other metal (4N). 0290, the ends of the detonating metal.................. wood, natural, ordinary cord must be sealed, for example, by plastics............... (4C1). a plug firmly fixed so that the wood................... wood, natural, sift explosive cannot escape. The ends of Reels.................. proof walls (4C2). CORD DETONATING flexible must be Sheets................. plywood (4D). fastened securely paper.................. reconstituted wood 2. For UN0065 and UN0289, inner plastics............... (4F). packagings are not required when fiberboard (4G). they are fastened securely in coils plastics, solid (4H2). Drums. steel (1A1 or 1A2). aluminum (1B1 or 1B2). other metal (1N1 or 1N2). plywood (1D). fiber (1G). pl#

Passage 244astics (1H1 or 1H2). 140.................................. Bags................... Not necessary.......... Boxes. PARTICULAR PACKING REQUIREMENTS OR plastics steel (4A). EXCEPTIONS: Reels.................. aluminum (4B). 1. If the ends of UN0105 are sealed, Sheets................. other metal (4N). no inner packagings are required paper, kraft........... wood, natural, ordinary 2. For UN0101, the packaging must be plastics............... (4C1). sift-proof except when the fuse is Receptacles............ wood, natural, sift covered by a paper tube and both wood................... proof walls (4C2). ends of the tube are covered with plywood (4D). removable caps reconstituted wood 3. For UN0101, steel or aluminum (4F). boxes or drums must not be used fiberboard (4G). plastics, solid (4H2). Drums. plastics (1H1 or 1H2). steel (1A1 or 1A2). aluminum (1B1 or 1B2). other metal (1N1 or 1N2). plywood (1D). fiber (1G). 141.................................. Receptacles............ Not necessary.......... Boxes. fiberboard steel (4A). metal.................. aluminum (4B). plastics............... other metal (4N). wood................... wood, natural, ordinary Trays, fitted with (4C1). dividing partitions. wood, natural, sift plastics............... proof walls (4C2). wood................... plywood (4D). Dividing partitions in reconstituted wood the outer packagings. (4F). fiberboard (4G). plastics, solid (4H2). Drums. steel (1A1 or 1A2). aluminum (1B1 or 1B2). other metal (1N1 or 1N2). plywood (1D). fiber (1G). plastics (1H1 or 1H2). 142.................................. Bags................... Not necessary.......... Boxes. paper steel (4A). plastics............... aluminum (4B). Receptacles............ other metal (4N). fiberboard............. wood, natural, ordinary metal.................. (4C1). plastics............... wood, natural, sift wood................... proof walls (4C2). Sheets................. plywood (4D). paper.................. reconstituted wood Trays, fitted with (4F). dividing partitions. fiberboard (4G). plastics............... plastics, solid (4H2). Drums. steel (1A1 or 1A2). aluminum (1B1 or 1B2). other metal (1N1 or 1N2). plywood (1D). fiber (1G). plastics (1H1 or 1H2). 143.................................. Bag.................... Not necessary.......... Boxes.#

Passage 245PARTICULAR PACKING REQUIREMENTS OR paper, kraft steel (4A). EXCEPTIONS: plastics............... aluminum (4B). 1. For UN 0271, 0272, 0415 and 0491 textile................ other metal (4N). when metal packagings are used, textile, rubberized.... wood, natural, ordinary metal packagings must be so Receptacles............ (4C1). constructed that the risk of fiberboard............. wood, natural, sift explosion, by reason of increase in metal.................. proof walls (4C2). internal pressure from internal or plastics............... plywood (4D). external causes is prevented wood................... reconstituted wood 2. Composite packagings (6HH2) Trays, fitted with (4F). (plastic receptacle with outer solid dividing partitions. fiberboard (4G). box) may be used in lieu of plastics............... plastics, solid (4H2). combination packagings wood................... Drums. steel (1A1 or 1A2). aluminum (1B1 or 1B2). other metal (1N1 or 1N2). plywood (1D). fiber (1G). plastics (1H1 or 1H2). 144.................................. Receptacles............ Not necessary.......... Boxes. PARTICULAR PACKING REQUIREMENTS OR fiberboard steel (4A). EXCEPTIONS: metal.................. aluminum (4B) For UN0248 and UN 0249, packagings plastics............... other metal (4N). must be protected against the wood................... wood, natural, ordinary ingress of water. When CONTRIVANCES, Dividing partitions in (4C1) with metal WATER ACTIVATED are transported the outer packagings. liner. unpackaged, they must be provided plywood (4D) with metal with at least two independent liner. protective features that prevent the reconstituted wood (4F) ingress of water with metal liner. plastics, expanded (4H1). plastics, solid (4H2). Drums. steel (1A1 or 1A2). aluminum (1B1 or 1B2). other metal (1N1 or 1N2). plastics (1H1 or 1H2). plywood (1D). ---------------------------------------------------------------------------------------------------------------- 0 24. In Sec. 173.63, paragraph (b) is revised to read as follows:#

Passage 246* * * * * (b) Limited quantities of Cartridges, small arms, Cartridges, power devices, Cartridges for tools, blank, and Cases, cartridge, empty with primer. (1)(i) Cartridges, small arms, Cartridges, power devices, Cartridges for tools, blank, and Cases, cartridge, empty with primer that have been classed as Division 1.4S explosive may be offered for transportation and transported as limited quantities when packaged in accordance with paragraph (b)(2) of this section. Packages containing such articles may be marked with either the marking prescribed in Sec. 172.315(a) or (b) of this subchapter and offered for transportation and transported by any mode. For transportation by aircraft, the package must conform to the applicable requirements of Sec. 173.27 of this part. In addition, packages containing such articles offered for transportation by aircraft must be marked with the proper shipping name as prescribed in the Sec. 172.101 Hazardous Materials Table of this subchapter. Packages containing such articles are not subject to the shipping paper requirements of subpart C of part 172 of this subchapter unless the material meets the definition of a hazardous substance, hazardous waste, marine pollutant, or is offered for transportation and transported by aircraft or vessel. Additionally, packages containing such articles are excepted from the requirements of subparts E (Labeling) and F (Placarding) of part 172 of this subchapter. (ii) Until December 31, 2012, a package containing such articles may be marked with the proper shipping name ``Cartridges, small arms'' or ``Cartridges for tools, blank (used to project fastening devices)'' and reclassed as ``ORM-D-AIR'' material if it contains properly packaged articles as authorized by this subchapter on October 1, 2010. Additionally, for transportation by aircraft, Cartridges, power devices must be successfully tested under the UN Test Series 6(d) criteria for reclassification as ORM-D-AIR material effective July 1, 2011. Until December 31, 2020, a package containing such articles may be marked with the proper shipping name ``Cartridges, small arms'' or ``Cartridges, power device (used to project fastening devices)'' and reclassed as ``ORM-D'' material if it contains properly packaged articles as authorized by this subchapter on October 1, 2010. (iii) Cartridges, small arms and Cartridges for tools, blank, and Cases#

Passage 247, cartridge empty with primer that may be shipped as a limited quantity or ORM-D material are as follows: (A) Ammunition for rifle, pistol or shotgun; (B) Ammunition with inert projectiles or blank ammunition; (C) Ammunition having no tear gas, incendiary, or detonating explosive projectiles; (D) Ammunition not exceeding 12.7 mm (50 caliber or 0.5 inch) for rifle or pistol, cartridges or 8 gauge for shotshells; (E) Cartridges for tools, blank; and (F) Cases, cartridge, empty with primer. (2) Packaging for Cartridges, small arms, Cartridges for tools, blank, Cases, cartridge empty with primer as limited quantity or ORM-D material must be as follows: (i) Ammunition must be packed in inside boxes, or in partitions that fit snugly in the outside packaging, or in metal clips; (ii) Primers must be protected from accidental initiation; (iii) Inside boxes, partitions or metal clips must be packed in securely-closed strong outside packagings; (iv) Maximum gross weight is limited to 30 kg (66 pounds) per package; and (v) Cartridges for tools, blank, Cases, cartridge, empty with primer, and 22 caliber rim-fire cartridges may be packaged loose in strong outside packagings. * * * * * 0 25. In Sec. 173.115, paragraph (k), is revised to read as follows: * * * * * (k) For Division 2.2 gases, the oxidizing ability shall be determined by tests or by calculation in accordance with ISO 10156 (including Technical Corrigendum 1) (IBR, see Sec. 171.7 of this subchapter). * * * * * 0 26. In Sec. 173.121, paragraph (b)(1)(iii) is revised to read as follows: Sec. 173.121 Class 3--Assignment of packing group. * * * * * (b) * * * (1) * * * (iii) The capacity of the packaging is not more than 30 L (7.9 gallons); except that for transportation by highway, rail or cargo aircraft, the capacity of the package is not more than 100 L (26.3 gallons); and * * * * * 0 27. In Sec. 173.158, paragraphs (d)(2), (e), (f)(3), (g), and (h) introductory text are revised to read as follows:#

Passage 248* * * * * (d) * * * (2) In combination packagings with 1A2, 1B2, 1N2, 1D, 1G, 1H2, 3H2, 4A, 4B, 4N or 4G outer packagings with inner glass packagings of 2.5 L (0.66 gallons) or less capacity cushioned with a non-reactive, absorbent material and packed within a tightly closed intermediate packaging of metal or plastic. (e) Nitric acid of less than 90 percent concentration, when offered for transportation or transported by rail, highway, or water may be packaged in 4A, 4B, or 4N metal boxes, 4G fiberboard boxes or 4C1, 4C2, 4D or 4F wooden boxes with inside glass packagings of not over 2.5 L (0.66 gallon) capacity each. (f) * * * (3) In combination packagings with 1A2, 1B2, 1N2, 1D, 1G, 1H2, 3H2, 4C1, 4C2, 4D, 4F, 4G, 4A, 4B or 4N outer packagings and plastic inner packagings not over 2.5 L (0.66 gallon) capacity further individually overpacked in tightly closed metal packagings. (g) Nitric acid of more than 70 percent concentration, when offered for transportation or transported by cargo aircraft only, must be packaged in combination packagings with 1A2, 1B2, 1N2, 1D, 1G, 1H2, 3H2, 4C1, 4C2, 4D, 4F, 4G, 4A, 4B or 4N outer packagings with glass or earthenware inner packagings of not over 1 L (0.3 gallon) or glass ampoules of not over 0.5 L (0.1 gallon). (h) Nitric acid of less than 70 percent concentration, when offered for transportation in cargo aircraft only must be packaged in combination packagings with 1A2, 1B2, 1N2, 1D, 1G, 1H2, 3H2, 4C1, 4C2, 4D, 4F, 4G, 4A, 4B or 4N outer packagings with inner packagings of-- * * * * * 0 28. In Sec. 173.159a, add paragraph (d)(3) to read as follows: Sec. 173.159a Exceptions for non-spillable batteries. * * * * * (d) * * * (3) For transport by aircraft, must be transported as cargo and may not be carried onboard an aircraft by passengers or crewmembers in carry-on baggage, checked baggage, or on their person unless specifically excepted by Sec. 175.10. 0 29. In Sec. 173.160 is revised to read as follows: Sec. 173.160 Bombs, smoke, non-explosive (corrosive).#

Passage 249Bombs, smoke, non-explosive may be shipped provided they are without ignition elements, bursting charges, detonating fuses or other explosive components. They must be packaged in metal (4A, 4B, 4N), wooden (4C1, 4C2), plywood (4D), or reconstituted wood (4F), fiberboard (4G) or solid plastic (4H2) boxes, or metal (1A2, 1B2, 1N2), plastic (1H2), plywood drums (1D), or fiber (1G) drums that meet Packing Group II requirements. 0 30. In Sec. 173.162, paragraphs (a)(1), (a)(2), and (c) are revised to read as follows:#

Passage 250(a) * * * (1) In combination packagings intended to contain liquids consisting of glass, earthenware or rigid plastic inner packagings with a maximum net mass of 15 kg (33 pounds) each. The inner packagings must be packed in wood boxes (4C1, 4C2, 4D, 4F), fiberboard boxes (4G), plastic boxes (4H1, 4H2), fiber drums (1G) or steel, metal, other than steel or aluminum, and plastic drums or jerricans (1A1, 1A2, 1N1, 1N2, 1H1, 1H2, 3A2 or 3H2) with sufficient cushioning materials to prevent breakage. Either the inner packagings or the outer packagings must have an inner liner that is leakproof or bags of strong leakproof and puncture-resistant material impervious to the contents and completely surrounding the contents to prevent it from escaping from the package, irrespective of its position. (2) In packagings intended to contain liquids consisting of semi- rigid plastic inner packagings of not more than 2.5 kg (5.5 pounds) net capacity each, individually enclosed in a sealed, leak-tight bag of strong puncture-resistant material. The sealed bags must be packed in wooden (4C1, 4C2), plywood (4D), reconstituted wood (4F), fiberboard (4G), plastic (4H1, 4H2) or metal, other than steel or aluminum (4N) boxes or in fiber (1G), steel (1A1, 1A2), metal, other than steel or aluminum (1N1, 1N2), or plastic (1H1 or 1H2) drums, that are lined with leak-tight, puncture-resistant material. Bags and liner material must be chemically resistant to gallium. * * * * * (c) Manufactured articles or apparatuses, each containing not more than 100 mg (0.0035 ounce) of gallium and packaged so that the quantity of gallium per package does not exceed 1 g (0.35 ounce) are not subject to the requirements of this subchapter. For transportation by aircraft, such articles and apparatuses must be transported as cargo and may not be carried onboard an aircraft by passengers or crewmembers in carry-on baggage, checked baggage, or on their person unless specifically excepted by Sec. 175.10. 0 31. In Sec. 173.164: 0 a. Paragraphs (a)(1) is revised; 0 b. Paragraph (a)(5) is added; 0 c. Paragraphs (b) and (c)(2) are revised; and 0 d. Paragraph (f) is added. The revisions and additions read as follows: Sec. 173.164 Mercury (metallic and articles containing mercury).#

Passage 251(a) * * * (1) In inner packagings of earthenware, glass or plastic containing not more than 3.5 kg (7.7 pounds) of mercury, or inner packagings that are glass ampoules containing not more than 0.5 kg (1.1 pounds) of mercury, or iron or steel quicksilver flasks containing not more than 35 kg (77 pounds) of mercury. The inner packagings or flasks must be packed in steel drums (1A1, 1A2), metal, other than steel or aluminum drums (1N1, 1N2), steel jerricans (3A2), wooden boxes (4C1, 4C2), plywood boxes (4D), reconstituted wood boxes (4F), fiberboard boxes (4G), metal, other than steel or aluminum boxes (4N), plastic boxes (4H2), plywood drums (1D) or fiber drums (1G). * * * * * (5) When transported as cargo, lamps are excepted from the requirements of this subchapter provided, each lamp contains not more than 1 g of mercury and is packaged so that there is not more than 30 g of mercury per package. Packages must be so designed and constructed such that when dropped from a height of not less than 0.5 meter (1.5 feet) the packages must still be fit for transport and there must be no damage to the contents. (b) When transported as cargo, manufactured articles or apparatuses, each containing not more than 100 mg (0.0035 ounce) of mercury and packaged so that the quantity of mercury per package does not exceed 1 g (0.035 ounce) are not subject to the requirements of this subchapter. (c) * * * (2) When transported as cargo, thermometers, switches and relays, each containing a total quantity of not more than 15 g (0.53 ounces) of mercury, are excepted from the requirements of this subchapter if installed as an integral part of a machine or apparatus and so fitted that shock of impact damage, leading to leakage of mercury, is unlikely to occur under conditions normally incident to transport. * * * * * (f) For vessel transport, manufactured articles or instruments containing less than 0.45 kg (1.0 pound) of mercury are not subject to the requirements of this subchapter. 0 32. Section 173.165 is revised to read as follows:#

Passage 252(a) Polyester resin kits consisting of a base material component (Class 3, Packing Group II or III) and an activator component (Type D, E, or F organic peroxide that does not require temperature control)-- (1) The organic peroxide component must be packed in inner packagings not over 125 mL (4.22 fluid ounces) net capacity each for liquids or 500 g (17.64 ounces) net capacity each for solids. (2)(i) Except for transportation by aircraft, the flammable liquid component must be packaged in suitable inner packagings. (ii) For transportation by aircraft, a Packing Group II base material is limited to a quantity of 5 L (1.3 gallons) in metal or plastic inner packagings and 1 L (0.3 gallons) in glass inner packagings. A Packing Group III base material is limited to a quantity of 10 L (2.6 gallons) in metal or plastic inner packagings and 2.5 L (0.66 gallons) in glass inner packagings. (3) If the flammable liquid component and the organic peroxide component will not interact dangerously in the event of leakage, they may be packed in the same outer packaging. (4) The Packing Group assigned will be II or III, according to the criteria for Class 3, applied to the base material. Additionally, polyester resin kits must be packaged in specification combination packagings, based on the performance level required of the base material (II or III) contained within the kit, as prescribed in Sec. Sec. 173.202 or 173.203 of this subchapter, as appropriate. (5) For transportation by aircraft, the following additional requirements apply: (i) Closures on inner packagings containing liquids must be secured by secondary means; (ii) Inner packagings containing liquids must be capable of meeting the pressure differential requirements prescribed in Sec. 173.27(c); and (iii) The total quantity of activator and base material may not exceed 5 kg (11 lbs) per package for a Packing Group II base material. The total quantity of activator and base material may not exceed 10 kg (22 lbs) per package for a Packing Group III base material. The total quantity of polyester resin kits per package is calculated on a one-to- one basis (i.e., 1 L equals 1 kg). (b) Polyester resin kits are eligible for the Small Quantity exceptions in Sec. 173.4 and the Excepted Quantity exceptions in Sec. 173.4a, as applicable. (c) Limited quantities. Limited quantity packages of polyester resin kits are excepted from#

Passage 253labeling requirements, unless the material is offered for transportation or transported by aircraft, and are excepted from the specification packaging requirements of this subchapter when packaged in combination packagings according to this paragraph. For transportation by aircraft, only hazardous material authorized aboard passenger-carrying aircraft may be transported as a limited quantity. A limited quantity package that conforms to the provisions of this section is not subject to the shipping paper requirements of subpart C of part 172 of this subchapter, unless the material meets the definition of a hazardous substance, hazardous waste, marine pollutant, or is offered for transportation and transported by aircraft or vessel, and is eligible for the exceptions provided in Sec. 173.156 of this part. In addition, shipments of limited quantities are not subject to subpart F (Placarding) of part 172 of this subchapter. Each package must conform to the general packaging requirements of subpart B of this part and may not exceed 30 kg (66 pounds) gross weight. (1) For other than transportation by aircraft, the organic peroxide component must be packed in inner packagings not over 125 mL (4.22 fluid ounces) net capacity each for liquids or 500 g (17.64 ounces) net capacity each for solids. For transportation by aircraft, the organic peroxide component must be packed in inner packagings not over 30 mL (4.22 fluid ounces) net capacity each for liquids or 100 g (17.64 ounces) net capacity each for solids. (2) Except for transportation by aircraft, the flammable liquid component must be packed in inner packagings not over 5 L (1.3 gallons) net capacity each for a Packing Group II and Packing Group III liquid. For transportation by aircraft, the flammable liquid component must be packed in inner packagings not over 1 L (0.26 gallons) net capacity each for a Packing Group II material. The flammable liquid component must be packed in metal or plastic inner packagings not over 5.0 L (1.3 gallons) net capacity each or glass inner packagings not over 2.5 L (0.66 gallons) net capacity each for a Packing Group III material. (3) If the flammable liquid component and the organic peroxide component will not interact dangerously in the event of leakage, they may be packed in the same outer packaging. (4) For transportation by aircraft, the following additional requirements appl#

Passage 254(i) Closures. Closures on inner packagings containing liquids must be secured by secondary means as prescribed in Sec. 173.27(d); (ii) Liquids. Inner packagings containing liquids must be capable of meeting the pressure differential requirements prescribed in Sec. 173.27(c); (iii) Quantity. The total quantity of activator and base material may not exceed 1 kg (2.2 lbs) per package for a Packing Group II base material. The total quantity of activator and base material may not exceed 5 kg (11 lbs) per package for a Packing Group III base material. The total quantity of polyester resin kits per package is calculated on a one-to-one basis (i.e., 1 L equals 1 kg); (iv) Drop test capability. Fragile inner packagings must be packaged to prevent failure under conditions normally incident to transport. Packages of consumer commodities must be capable of withstanding a 1.2 m drop on solid concrete in the position most likely to cause damage; and (v) Stack test capability. Packages of consumer commodities must be capable of withstanding, without failure or leakage of any inner packaging and without any significant reduction in effectiveness, a force applied to the top surface for a duration of 24 hours equivalent to the total weight of identical packages if stacked to a height of 3.0 m (including the test sample). (d) Consumer commodities. Until December 31, 2020, a limited quantity package of polyester resin kits that are also consumer commodities as defined in Sec. 171.8 of this subchapter may be renamed ``Consumer commodity'' and reclassed as ORM-D or, until December 31, 2012, as ORM-D-AIR material and offered for transportation and transported in accordance with the applicable provisions of this subchapter in effect on October 1, 2010. 0 33. In Sec. 173.175, paragraph (g) is added to read as follows: * * * * * (g) For transportation by aircraft, permeation devices must be transported as cargo and may not be carried onboard an aircraft by passengers or crewmembers in carry-on baggage, checked baggage, or on their person unless specifically excepted by Sec. 175.10. 0 34. Section 173.176 is added to read as follows:#

Passage 255(a) Capacitors, including capacitors containing an electrolyte that does not meet the definition of any hazard class or division as defined in this part, must conform to the following requirements: (1) Capacitors not installed in equipment must be transported in an uncharged state; (2) Each capacitor must be protected against a potential short circuit hazard in transport as follows: (i) Except for transport by air, when a capacitor's energy storage capacity is less than or equal to 10Wh or when the energy storage capacity of each capacitor in a module is less than or equal to 10 Wh, the capacitor or module must be protected against short circuit or be fitted with a metal strap connecting the terminals; and (ii) For transport by air, or when the energy storage capacity of a capacitor or a capacitor in a module is more than 10 Wh, the capacitor or module must be fitted with a metal strap connecting the terminals; (3) Capacitors containing an electrolyte that meets the definition of one or more hazard class or division as defined in this part, must be designed to withstand a 95 kPa (0.95 bar, 14 psi) pressure differential; (4) Capacitors must be designed and constructed to safely relieve pressure that may build up in use, through a vent or a weak point in the capacitor casing. Any liquid that is released upon venting must be contained by the packaging or by the equipment in which a capacitor is installed; and (5) Capacitors must be marked with the energy storage capacity in Wh. (b) Capacitors must be packed in strong outer packagings. For transport by air, capacitors must be securely cushioned within the outer packagings. Capacitors installed in equipment may be offered for transport unpackaged or on pallets, when the capacitors are afforded equivalent protection by the equipment in which they are contained. (c) Capacitors containing an electrolyte not meeting the definition of any hazard class or division as defined in this part, including when installed in equipment, are not subject to any other requirements of this subchapter. (d) Capacitors containing an electrolyte that meets the definition of one or more hazard class or division as defined in this part, with an energy storage capacity of 10 Wh or less are not subject to any other requirements of this subchapter, when they are capable of withstanding a 1.2 m (3.9 feet) drop test unpackaged onto a rigid, no#

Passage 256n- resilient, flat and horizontal surface without loss of contents. (e) Capacitors containing an electrolyte meeting the definition of one or more hazard class or division as defined in this part, that are not installed in equipment, and with an energy storage capacity of more than 10 Wh are subject to the requirements of this subchapter. (f) Capacitors installed in equipment and containing an electrolyte meeting the definition of one or more hazard class or division as defined in this part, are not subject to any other requirements of this subchapter, provided the equipment is packaged in a strong outer packaging and in such a manner as to prevent accidental functioning of the capacitors during transport. Large, robust equipment containing capacitors may be offered for transport unpackaged or on pallets when the capacitors are afforded equivalent protection by the equipment in which they are contained. 0 35. In Sec. 173.181, paragraphs (b) and (c) are revised to read as follows: Sec. 173.181 Pyrophoric materials (liquids). * * * * * (b) Steel boxes (4A), aluminum boxes (4B), metal boxes, other than steel or aluminum (4N), wooden boxes (4C1, 4C2, 4D, or 4F) or fiberboard boxes (4G); steel drums (1A1 or 1A2), aluminum drums (1B1 or 1B2), metal drums, other than steel or aluminum (1N1 or 1N2), plywood drums (1D), or fiber drums (1G); or steel jerricans (3A1 or 3A2) or aluminum jerricans (3B1 or 3B2) enclosing not more than four strong, tight metal cans with inner receptacles of glass or metal, not over 1 L (0.3 gallon) capacity each, having positive screwcap closures adequately gasketed. Inner packagings must be cushioned on all sides with dry, absorbent, incombustible material in a quantity sufficient to absorb the entire contents. The strong, tight metal cans must be closed by positive means, not by friction. (c) Steel drums (1A1 or 1A2), aluminum drums (1B1 or 1B2), metal drums, other than steel or aluminum(1N1 or 1N2) or fiber drums (1G); steel jerricans (3A1 or 3A2) or aluminum jerricans (3B1 or 3B2); or steel boxes (4A), aluminum boxes (4B) or metal boxes, other than steel or aluminum (4N) not exceeding 220 L (58 gallons) capacity each with strong, tight inner metal cans not over 4.0 L (1 gallon) capacity each. The strong, tight metal cans must be closed by positive means, not friction.#

Passage 2570 36. In Sec. 173.183, paragraph (a) is revised to read as follows: * * * * * (a) In steel drums (1A2), aluminum drums (1B2), other metal drums (4A2), steel jerricans (3A2), aluminum jerricans (3B2), steel, aluminum or other metal (4A, 4B, 4N) boxes, wooden (4C1, 4C2), plywood (4D) or reconstituted wood (4F) boxes or plywood drums (1D) with each reel in a tightly closed metal can, polypropylene canister, or strong cardboard or fiberboard inner packaging with cover held in place by adhesive tape or paper; or * * * * * 0 37. In Sec. 173.184, paragraph (b) is revised to read as follows: * * * * * (b) Fusees (highway and railway) must be packaged in steel (1A2), aluminum (1B2) or other metal (1N2) drums, steel (3A2) or aluminum (3B2) jerricans, steel (4A), aluminum (4B) or other metal (4N) boxes, wooden (4C1, 4C2), plywood (4D) or reconstituted wood (4F) boxes or in fiberboard boxes (4G), plywood (1D) or fiber (1G) drums. If the fusees are equipped with spikes packagings must have reinforced ends to prevent penetration of spikes through the outer packagings; packages must be capable of passing drop test requirements (Sec. 178.603 of this subchapter), including at least one drop with spike in a downward position, and other requirements of part 178 of this subchapter, at the Packing Group II performance level. 0 38. In Sec. 173.186, paragraph (e) is revised to read as follows: * * * * * (e) Packagings. Strike-anywhere matches must be tightly packed in securely closed chipboard, fiberboard, wooden, or metal inner packagings to prevent accidental ignition under conditions normally incident to transportation. Each inner packaging may contain no more than 700 strike-anywhere matches and must be packed in outer steel drums (1A1, 1A2), aluminum drums (1B1, 1B2), other metal drums (1N1, 1N2), steel jerricans (3A1, 3A2), aluminum jerricans (3B1, 3B2), steel (4A), aluminum (4N), other metal (4N) boxes, wooden (4C1, 4C2), plywood (4D), reconstituted wood (4F) or fiberboard (4G) boxes, plywood (1D) or fiber (1G) drums. Gross weight of fiberboard boxes (4G) must not exceed 30 kg (66 pounds). Gross weight of other outer packagings must not exceed 45 kg (100 pounds). 0 39. In Sec. 173.187, paragraphs (a) and (d) are revised to read as follows: Sec. 173.187 Pyrophoric solids, metals or alloys, n.o.s.#

Passage 258* * * * * (a) In steel, aluminum or other metal boxes (4A, 4B or 4N) and contain no more than 15 kg (33 pounds) each. * * * * * (d) In steel, aluminum or other metal drums (1A1, 1A2, 1B1, 1B2, 1N1 or 1N2) with a gross mass not exceeding 150 kg (331 pounds) per drum. * * * * * 0 40. In Sec. 173.188, paragraphs (a)(1) introductory text, (a)(2), and (b)(1) are revised to read as follows: Sec. 173.188 White or yellow phosphorus. * * * * * (a) * * * (1) Steel, aluminum or other metal boxes (4A, 4B or 4N) or wooden boxes (4C1, 4C2, 4D, or 4F) with: * * * * * (2) Steel, aluminum or other metal drums (1A1, 1B1 or 1N1) not over 250 L (66 gallons) capacity each or steel, aluminum or other metal drums (1A2, 1B2, or 1N2) not over 115 L (30 gallons) capacity each. (b) * * * (1) Steel, aluminum or other metal drums (1A2, 1B2 or 1N2) not over 115 L (30 gallons) capacity each, or * * * * * 0 41. In Sec. 173.189, paragraph (b) is revised to read as follows: Sec. 173.189 Batteries containing sodium or cells containing sodium. * * * * * (b) Cells must be protected against short circuit and must consist of hermetically sealed metal casings that fully enclose the hazardous materials and that are so constructed and closed as to prevent the release of the hazardous materials under normal conditions of transport. Cells must be placed in suitable outer packagings with sufficient cushioning material to prevent contact between cells and between cells and the internal surfaces of the outer packaging, and to ensure that no dangerous shifting of the cells within the outer packaging occurs in transport. Cells must be packaged in 1A2, 1B2, 1N2, 1D, 1G, 1H2, 4A, 4B, 4N, 4C1, 4C2, 4D, 4F, 4G, 4H1, 4H2, 3A2, 3B2 or 3H2) outer packagings that meet the requirements of part 178 of this subchapter at the Packing Group II performance level. * * * * * 0 42. In Sec. 173.193, in paragraph (a), the first sentence is revised to read as follows: Sec. 173.193 Bromoacetone, methyl bromide, chloropicrin and methyl bromide or methyl chloride mixtures, etc. (a) Bromoacetone must be packaged as follows in metal boxes (4A, 4B or 4N) or wooden boxes (4C1, 4C2, 4D or 4F) with inner glass receptacles or tubes in hermetically sealed metal receptacles in corrugated fiberboard cartons. * * * * * * * * 0 43. In Sec. 173.194, paragraphs (b)(1) and (2) are revised to read as follows:#

Passage 259* * * * * (b) * * * (1) If the poisonous material does not exceed 5 mL (0.2 fluid ounce) if a liquid or 5 g (0.2 ounce) if a solid, it may be packed in glass inner receptacles of not over 120 mL (4.1 fluid ounces) each. Each glass receptacle, cushioned with absorbent material must be packed in a hermetically sealed metal can of not less than 0.30 mm (0.012 inch) wall thickness. Metal cans, surrounded on all sides by at least 25 mm (1 inch) of dry sawdust, must be packed in 4A, 4B or 4N metal boxes or 4C1, 4C2, 4D or 4F wooden boxes. Not more than 100 mL (3.4 fluid ounces) or 100 g (3.5 ounces) of poisonous materials may be packed in one outer box. (2) If the poisonous material does not exceed 5 mL (0.2 fluid ounce) if a liquid or 20 g (0.7 ounce) if a solid, it may be packed in glass inner receptacles with screw-top closures of not less than 60 mL (2 fluid ounces), hermetically sealed. Twelve bottles containing poisonous material, not to exceed 100 mL (3.4 fluid ounces) or 100 g (3.5 ounces), or both, may be placed in a plastic carrying case, each glass receptacle surrounded by absorbent cushioning and each separated from the other by sponge rubber partitions. The plastic carrying case must be placed in a tightly fitting fiberboard box which in turn must be placed in a tightly fitting 4A, 4B or 4N metal box or 4C1, 4C2, 4D or 4F wooden box. 0 44. In Sec. 173.196, paragraph (a)(3) is revised to read as follows: Sec. 173.196 Category A infectious substances. (a) * * * (3) A rigid outer packaging of adequate strength for its capacity, mass and intended use; including, drums (1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 1H1, 1H2, 1D, 1G); boxes (4A, 4B, 4N, 4C1, 4C2, 4D, 4F, 4G, 4H1, 4H2); or jerricans (3A1, 3A2, 3B1, 3B2, 3H1, 3H2). The outer packaging must measure not less than 100 mm (3.9 inches) at its smallest overall external dimension. * * * * * 0 45. In Sec. 173.199, paragraph (d)(1) is revised to read as follows: Sec. 173.199 Category B infectious substances.#

Passage 260(d) * * * (1) Ice or dry ice must be placed outside the secondary packaging or in an overpack. Interior supports must be provided to secure the secondary packagings in the original position. If ice is used, the outside packaging must be leakproof or must have a leakproof liner. If dry ice is used, the outside packaging must permit the release of carbon dioxide gas and otherwise meet the provisions in Sec. 173.217. The primary receptacle and secondary packaging must maintain their integrity at the temperature of the refrigerant used, as well as the temperatures and pressures of transport by aircraft they could be subjected to if refrigeration were lost, and sufficient absorbent material must be provided to absorb all liquid, including melted ice. * * * * * 0 46. In Sec. 173.201, in the paragraph (b) list, the wording ``Metal box other than steel or aluminum: 4N'' is added between the entry ``Solid plastic box: 4H2'' and the entry ``Inner packagings:''. 0 47. In Sec. 173.202, in the paragraph (b) list, the wording ``Metal box other than steel or aluminum: 4N'' is added between the entry ``Solid plastic box: 4H2'' and the entry ``Inner packagings:''. 0 48. In Sec. 173.203, in the paragraph (b) list, the wording ``Metal box other than steel or aluminum: 4N'' is added between the entry ``Solid plastic box: 4H2'' and the entry ``Inner packagings:'' 0 49. Section 173.211 is amended as follows: 0 a. In the paragraph (b) list, the wording ``Metal box other than steel or aluminum: 4N'' is added between the entry ``Solid plastic box: 4H2'' and the entry ``Inner packagings:''. 0 b. In the paragraph (c) list, the wording ``Metal box other than steel or aluminum with liner: 4N'' is added between the entry ``Aluminum box with liner: 4B'' and the entry ``Natural wood box, sift proof: 4C2''. 0 50. Section 173.212 is amended as follows: 0 a. In the paragraph (b) list, the wording ``Metal box other than steel or aluminum: 4N'' is added between the entry ``Solid plastic box: 4H2'' and the entry ``Inner packagings:''. 0 b. In the paragraph (c) list, the wording ``Metal box other than steel or aluminum with liner: 4N'' is added between the entry ``Aluminum box with liner: 4B'' and the entry ``Natural wood box: 4C1''.#

Passage 2610 51. Section 173.213 is amended as follows: 0 a. In the paragraph (b) list, the wording ``Metal box other than steel or aluminum: 4N'' is added between the entry ``Solid plastic box: 4H2'' and the entry ``Inner packagings:''. 0 b. In the paragraph (c) list, the wording ``Metal box other than steel or aluminum with liner: 4N'' is added between the entry ``Aluminum box with liner: 4B'' and the entry ``Natural wood box, sift proof: 4C2''. 0 52. In Sec. 173.219, paragraphs (b)(1), (c)(1), and (c)(5) are revised to read as follows: * * * * * (b) * * * (1) Division 2.2 compressed or liquefied gases must be packaged in cylinders in accordance with the requirements of this subchapter; * * * * * (c) * * * (1) Division 2.2 compressed or liquefied gases must be packaged in cylinders in accordance with the requirements of this subchapter; * * * * * (5) Life-saving appliances containing no hazardous materials other than cylinders of Division 2.2 compressed or liquefied gases with no subsidiary risk, with a capacity not exceeding 120 mL, installed solely for the purpose of activating the appliance, are not subject to the provisions of this subchapter provided they are overpacked in rigid outer packagings with a maximum gross mass of 40 kg. For transportation by aircraft, such appliances must be transported as cargo and may not be carried onboard an aircraft by passengers or crewmembers in carry-on baggage, checked baggage, or on their person unless specifically excepted by Sec. 175.10. 0 53. In Sec. 173.220, paragraph (d) is revised to read as follows; Sec. 173.220 Internal combustion engines, self-propelled vehicles, mechanical equipment containing internal combustion engines, battery- powered equipment or machinery, fuel cell-powered equipment or machinery.#

Passage 262* * * * * (d) Lithium batteries. Except as provided in Sec. 172.102, Special Provision A101 of this subchapter, vehicles, engines and machinery powered by lithium metal batteries that are transported with these batteries installed are forbidden aboard passenger-carrying aircraft. Lithium batteries contained in vehicles, engines or mechanical equipment must be securely fastened in the battery holder of the vehicle, engine or mechanical equipment and be protected in such a manner as to prevent damage and short circuits ( e.g., by the use of non-conductive caps that cover the terminals entirely). Lithium batteries must be of a type that have successfully passed each test in the UN Manual of Tests and Criteria (IBR, see Sec. 171.7 of this subchapter) as specified in Sec. 173.185 of this subchapter, unless approved by the Associate Administrator. Equipment (other than vehicles, engines or mechanical equipment) containing lithium batteries, must be described as ``Lithium ion batteries contained in equipment'' or ``Lithium metal batteries contained in equipment,'' as appropriate, and transported in accordance with Sec. 173.185 and applicable special provisions. * * * * * 0 54. In Sec. 173.221, paragraph (a) is revised and paragraph (c) is added to read as follows: Sec. 173.221 Polymeric beads, expandable and Plastic molding compound. (a) Non-bulk shipments of Polymeric beads (or granules), expandable evolving flammable vapor and Plastic molding compound in dough, sheet or extruded rope form, evolving flammable vapor must be packed in: metal (4A, 4B, or 4N), wooden (4C1 or 4C2), plywood (4D), fiberboard (4G), reconstituted wood (4F), plastic (4H1 or 4H2) boxes, plywood drums (1D) or fiber drums (1G) with sealed inner plastic liners; in vapor tight metal or plastic drums (1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 1H1 or 1H2); in vapor tight metal or plastic jerricans (3A1, 3A2, 3B1, 3B2, 3H1, or 3H2); or packed in non-specification packagings when transported in dedicated vehicles or freight containers. The packagings need not conform to the requirements for package testing in part 178 of this subchapter, but must be capable of containing any evolving gases from the contents during normal conditions of transportation. * * * * * (c) For transportation by vessel, the provisions of Sec. 176.907 must be met.#

Passage 2630 55. In Sec. 173.225, the paragraph (c) ``Organic Peroxide Table'' and the paragraph (e) ``Organic Peroxide IBC Table'' are amended by adding the entries under ``[ADD]'' and revising entries under ``[REVISE]'' in the appropriate alphabetical sequence to read as follows: Sec. 173.225 Packaging requirements and other provisions for organic peroxides. Organic Peroxide Table -------------------------------------------------------------------------------------------------------------------------------------------------------- Diluent (mass %) Temperature ( Concentration --------------------------------- Water Packing [deg]C) Technical name ID No. (mass %) (mass %) method ---------------------- Notes A B I Control Emergency (1) (2) (3) (4a) (4b) (4c) (5) (6) (7a) (7b) (8) -------------------------------------------------------------------------------------------------------------------------------------------------------- [ADD] * * * * * * * ([3R- (3R, 5aS, 6S, 8aS, 9R, 10R, 12S, UN3106 <=100 ......... ......... ......... ......... OP7 ......... ......... ......... 12aR**)]-Decahydro-10-methoxy-3, 6, 9- trimethyl-3, 12-epoxy-12H-pyrano [4, 3- j]-1, 2-benzodioxepin)............ * * * * * * * 3, 6, 9-Triethyl-3, 6, 9-trimethyl-1, UN3110 =18 ......... >=65 ......... OP8 ......... ......... ......... 4, 7-triperoxonane................... * * * * * * * Di-(3, 5, 5-trimethylhexanoyl) UN3119 >38-52 >=48 ......... ......... ......... OP8 +10 +15 ......... peroxide............................. * * * * * * * Diisopropyl peroxydicarbonate......... UN3115 =68 ......... ......... ......... OP7 -15 -5 ......... * * * * * * * Di-(3,5,5-trimethylhexanoyl) peroxide. UN3115 >52-82 >=18 ......... ......... ......... OP7 0 +10 ......... * * * * * * * -------------------------------------------------------------------------------------------------------------------------------------------------------- Organic Peroxide IBC Table ---------------------------------------------------------------------------------------------------------------- Maximum UN No. Organic peroxide Type of IBC quantity Control Emergency (liters) temperature temperature ---------------------------------------------------------------------------------------------------------------- [ADD]#

Passage 264* * * * * * * Diisobutyryl peroxide, 31HA1 1000 -20 [deg]C -10 [deg]C not more than 28% as a stable dispersion in water. 31A 1250 -20 [deg]C -10 [deg]C Diisobutyryl peroxide, 31HA1 1000 -25 [deg]C -15 [deg]C not more than 42% as a stable dispersion in water. 31A 1250 -25 [deg]C -15 [deg]C * * * * * * * Di-(3, 5, 5- 31HA1 1000 +10 [deg]C +15 [deg]C trimethylhexanoyl) peroxide, not more than 52% in diluent type A. * * * * * * * 1, 1, 3, 3- 31A 1250 -5 [deg]C +5 [deg]C Tetramethylbutyl peroxyneodecanoate, not more than 52%, stable dispersion, in water. 31HA1 1000 -5 [deg]C +5 [deg]C * * * * * * * ---------------------------------------------------------------------------------------------------------------- 0 56. Section 173.226 is amended as follows: 0 a. In the paragraph (c)(1) list, the wording ``Expanded plastic box: 4H2'' is removed and the wording ``Expanded plastic box: 4H1'' is added in its place. 0 b. In the paragraph (c)(1) list, the wording ``Metal box other than steel or aluminum: 4N'' is added after the entry ``Solid plastic box: 4H2''. 0 57. In Sec. 173.230, paragraphs (e)(2)(ii) and (f)(3) are revised to read as follows: Sec. 173.230 Fuel cell cartridges containing hazardous material. * * * * * (e) * * * (2) * * * (ii) For fuel cell cartridges contained in equipment, the entire fuel cell system must be protected against short circuits and unintentional activation. The equipment must be securely cushioned in the outer packaging. (f) * * * (3) For transportation aboard passenger aircraft, for fuel cell cartridges contained in equipment, each fuel cell system and fuel cell cartridge must conform to to IEC 62282-6-100 and IEC 62282-6-100 Amend. 1 (IBR, see Sec. 171.7 of this subchapter) or a standard approved by the Associate Administrator; * * * * * 0 58. In Sec. 173.240, paragraph (f) is added to read as follows: Sec. 173.240 Bulk packaging for certain low hazard solid materials.#

Passage 265* * * * * (f) Flexible Bulk Containers. Flexible Bulk Containers are authorized subject to the conditions and limitations of this section provided the use of a Flexible Bulk Container is authorized by the inclusion of bulk packaging code B120 in Column (7) of the Sec. 172.101 Hazardous Materials Table of this subchapter and the Flexible Bulk Container conforms to the requirements in subpart S of part 178 of this subchapter. Flexible Bulk Containers may not be used for Packing Group I or II hazardous materials. 0 59. In Sec. 173.301b, paragraphs (c)(2)(ii) and (d) are revised to read as follows: Sec. 173.301b Additional general requirements for shipment of UN pressure receptacles. * * * * * (c) * * * (2) * * * (ii) By equipping the UN pressure receptacle with a valve cap conforming to the requirements in ISO 11117 and Technical Corrigendum 1 (IBR, see Sec. 171.7 of this subchapter). The cap must have vent-holes of sufficient cross-sectional area to evacuate the gas if leakage occurs at the valve; * * * (d) Non-refillable UN pressure receptacles. (1) When the use of a valve is prescribed, the valve must conform to the requirements in ISO 13340 (IBR, see Sec. 171.7 of this subchapter). (2) The receptacles must be transported as an inner package of a combination package; (3) The receptacle must have a water capacity not exceeding 1.25 L when used for a flammable or toxic gas or 50 liters for receptacles used to contain chemical under pressure; and (4) The receptacle is prohibited for Hazard Zone A material. * * * * * 0 60. In Sec. 173.302a, paragraph (a)(3) is revised to read as follows Sec. 173.302a Additional requirements for shipment of nonliquefied (permanent) compressed gases in specification cylinders. (a) * * * (3) DOT 39 DOT 39 cylinders. When the cylinder is filled with a Division 2.1 material, the internal volume of the cylinder may not exceed 1.23 L (75 in\3\) or 50 L (3050 in\3\) for chemical under pressure. * * * * * 0 61. In Sec. 173.306, paragraph (j) is revised to read as follows: Sec. 173.306 Limited quantities of compressed gases.#

Passage 266* * * * * (j) Aerosols and receptacles small, containing gas with a capacity of less than 50 mL. Aerosols, as defined in Sec. 171.8 of this subchapter, and receptacles, small, containing gas, with a capacity not exceeding 50 mL (1.7 fluid oz.) and with a pressure not exceeding 970 kPa (141 psig) at 55 [deg]C (131 [deg]F), containing no hazardous materials other than a Division 2.2 gas, are not subject to the requirements of this subchapter except that for transport by aircraft, such aerosols and receptacles must be transported as cargo and may not be carried onboard an aircraft by passengers or crewmembers in carry-on baggage, checked baggage, or on their person unless specifically excepted by Sec. 175.10. The pressure limit may be increased to 2,000 kPa (290 psig) at 55 [deg]C (131 [deg]F) provided the aerosols are transported in outer packages that conform to the packaging requirements of Subpart B of this part. This paragraph (j) does not apply to a self-defense spray (e.g., pepper spray). * * * * * 0 62. In Sec. 173.313: 0 a. The section heading is revised; 0 b. The introductory text is revised; 0 c. The table name is revised; 0 d. In the table, the entry for UN3220 is revised; and 0 e. In the table, entries are added for UN3500, UN3501, UN3502, UN3503, UN3504 and UN3505. The revisions and additions are to read as follows: Sec. 173.313 UN Portable Tank Table for Liquefied Compressed Gases and Chemical Under Pressure.#

Passage 267The UN Portable Tank Table for Liquefied Compressed Gases and chemical under pressure is referenced in Sec. 172.102(c)(7)(iii) of this subchapter for portable tanks that are used to transport liquefied compressed gases and chemicals under pressure. The table applies to each liquefied compressed gas and chemical under pressure that are identified with Special Provision T50 in Column (7) of the Sec. 172.101 Hazardous Materials Table. In addition to providing the UN identification number and proper shipping name, the table provides maximum allowable working pressures, bottom opening requirements, pressure relief device requirements, and degree of filling requirements for liquefied compressed gas and chemical under pressure permitted for transportation in a T50 portable tank. In the minimum test pressure column, ``small'' means a portable tank with a diameter of 1.5 meters or less when measured at the widest part of the shell, ``sunshield'' means a portable tank with a shield covering at least the upper third of the shell, ``bare'' means no sunshield or insulation is provided, and ``insulated'' means a complete cladding of sufficient thickness of insulating material necessary to provide a minimum conductance of not more than 0.67 w/m\2\/k. In the pressure relief requirements column, the word ``Normal'' denotes that a frangible disc as specified in Sec. 178.276(e)(3) of this subchapter is not required. UN Portable Tank Table for Liquefied Compressed Gases and Chemicals Under Pressure ---------------------------------------------------------------------------------------------------------------- Minimum design Non-refrigerated pressure (bar) Pressure relief UN No. liquefied small; bare; Openings below liquid requirements (See Maximum filling compressed gases sunshield; level Sec. 178.276(e)) density (kg/l) insulated ---------------------------------------------------------------------------------------------------------------- * * * * * * * 3220........ Pentafluoroethan 34.4............ Allowed.............. Normal............... 0.87 e or 30.8............ Refrigerant gas 27.5............ R 125. 24.5............#

Passage 268* * * * * * * 3500........ Chemical under See MAWP Allowed.............. Sec. 178.276(e)(3). See TP4 in Sec. pressure, n.o.s. definition in 172.102(c) Sec. 178.276(a). 3501........ Chemical under See MAWP Allowed.............. Sec. 178.276(e)(3). See TP4 in Sec. pressure, definition in 172.102(c) flammable, Sec. n.o.s. 178.276(a). 3502........ Chemical under See MAWP Allowed.............. Sec. 178.276(e)(3). See TP4 in Sec. pressure, definition in 172.102(c) toxic, n.o.s. Sec. 178.276(a). 3503........ Chemical under See MAWP Allowed.............. Sec. 178.276(e)(3). See TP4 in Sec. pressure, definition in 172.102(c) corrosive, Sec. n.o.s. 178.276(a). 3504........ Chemical under See MAWP Allowed.............. Sec. 178.276(e)(3). See TP4 in Sec. pressure, definition in 172.102(c) flammable, Sec. toxic, n.o.s. 178.276(a). 3505........ Chemical under See MAWP Allowed.............. Sec. 178.276(e)(3). See TP4 in Sec. pressure, definition in 172.102(c) flammable, Sec. corrosive, 178.276(a). n.o.s. ---------------------------------------------------------------------------------------------------------------- 0 63. In Sec. 173.316, paragraph (a)(8) is redesignated as paragraph (a)(9) and a new paragraph (a)(8) is added to read as follows: Sec. 173.316 Cryogenic liquids in cylinders. (a) * * * (8) All pressure relief device inlets must under maximum filling conditions be situated in the vapor space of the closed cryogenic receptacle and the devices must be arranged to ensure that the escaping vapor is discharged unobstructed. * * * * * 0 64. In Sec. 173.318, paragraph (b)(7)(vi) is added to read as follows: Sec. 173.318 Cryogenic liquids in cargo tanks. (b) * * * (7) * * * (vi) All pressure relief device inlets must under maximum filling conditions be situated in the vapor space of the closed cryogenic receptacle and the devices must be arranged to ensure that the escaping vapor is discharged unobstructed. * * * * * 0 65. Section 173.335 is added to read as follows: Sec. 173.335 Chemical under pressure n.o.s.#

Passage 269(a) General requirements. A cylinder filled with a chemical under pressure must be offered for transportation in accordance with the requirements of this section and Sec. 172.301. In addition, a DOT specification cylinder must meet the requirements in Sec. Sec. 173.301a, 173.302, 173.302a, and 173.305, as applicable. UN pressure receptacles must meet the requirements in Sec. Sec. 173.301b and 173.302b, as applicable. Where more than one section applies to a cylinder, the most restrictive requirements must be followed. (b) Filling limits. Cylinders must be filled so that at 50 [deg]C (122 [deg]F) the non-gaseous phase does not exceed 95% of their water capacity and they are not completely filled at 60 [deg]C (140 [deg]F). When filled, the internal pressure at 65 [deg]C (149 [deg]F) must not exceed the test pressure of the cylinder. The vapor pressures and volumetric expansion of all substances in the cylinders must be taken into account. (c) Minimum service pressure. The minimum service pressure must be in accordance with the design specifications of part 178 of this subchapter for the propellant. In any case the minimum test pressure must not be less than 20 bar. (d) Periodic inspection. The maximum requalification test period for cylinders transporting chemical under pressure n.o.s. is 5 years. 0 66. In Sec. 173.340, paragraphs (c)(1), (c)(2), and (d) are revised to read as follows:#

Passage 270* * * * * (c) * * * (1) In UN 4A, 4B, or 4N metal boxes or UN 4C1, 4C2, 4D, or 4F metal-strapped wooden boxes. Functioning elements not assembled in grenades or devices must be in a separate compartment of these boxes, or in inner or separate outer boxes, UN 4C1, 4C2, 4D, or 4F, and must be packed and cushioned so that they may not come in contact with each other or with the walls of the box during transportation. Not more than 50 tear gas devices and 50 functioning elements must be packed in one box, and the gross weight of the outer box may not exceed 35 kg (77 pounds). (2) In UN 1A2, 1B2, 1N2 or 1H2 drums. Functioning elements must be packed in a separate inner packaging or compartment. Not more than 24 tear gas devices and 24 functioning elements must be packed in one outer drum, and the gross weight of the drum may not exceed 35 kg (77 pounds). * * * * * (d) Tear gas devices may be shipped completely assembled when offered by or consigned to the U.S. Department of Defense, provided the functioning elements are packed so that they cannot accidentally function. Outer packagings must be UN 4A, 4B, or 4N metal boxes or UN 4C1, 4C2, 4D, or 4F metal-strapped wooden boxes. 0 67. The authority citation for part 175 continues to read as follows: Authority: 49 U.S.C. 5101-5128; 44701; 49 CFR 1.45 and 1.53. 0 68. In Sec. 175.8, paragraph (b)(3) is revised to read as follows: Sec. 175.8 Exceptions for operator equipment and items of replacement. (3) Aerosols of Division 2.2 only (for dispensing of food products), alcoholic beverages, colognes, liquefied gas lighters, perfumes, and portable electronic devices containing lithium cells or batteries that meet the requirements of Sec. 175.10(a)(18) carried aboard a passenger-carrying aircraft by the operator for use or sale on that specific aircraft. A liquefied gas lighter design must be examined and successfully tested by a person or agency authorized by the Associate Administrator. * * * * * 0 69. In Sec. 175.10: 0 a. Paragraphs (a)(14) and (15) and paragraph (a)(18) introductory text are revised; 0 b. Paragraph (a)(18)(iii) is added; 0 c. Paragraphs (a)(19)(vii) and (viii) are revised; and 0 d. Paragraphs (a)(20) through (24) are added. The revisions and additions read as follows: Sec. 175.10 Exceptions for passengers, crewmembers, and air operators.#

Passage 271(a) * * * (14) Electrically powered heat-producing articles (e.g., battery- operated equipment such as diving lamps and soldering equipment) as checked or carry-on baggage only and with the approval of the operator of the aircraft. The heat-producing component, the energy source, or other component (e.g., fuse) must be removed to prevent unintentional functioning during transport. Any battery that is removed must be protected against short circuit by placement in original retail packaging or by otherwise insulating terminals (e.g., by taping over exposed terminals or placing each battery in a separate plastic bag or protective pouch). (15) A wheelchair or other battery-powered mobility aid equipped with a nonspillable battery or a dry sealed battery when carried as checked baggage, provided-- (i) The battery conforms to the requirements of Sec. 173.159a(d) of this subchapter for non-spillable batteries; (ii) The battery conforms to the requirements of Sec. 172.102(c)(1), Special provision 130 of this subchapter for dry sealed batteries, as applicable; (iii) Visual inspection including removal of the battery, where necessary, reveals no obvious defects (removal of the battery from the housing should be performed by qualified airline personnel only); (iv) The battery is disconnected and the battery terminals are protected to prevent short circuits, unless the wheelchair or mobility aid design provides an effective means of preventing unintentional activation, and (v) The battery is-- (A) Securely attached to the wheelchair or mobility aid; (B) Is removed and placed in a strong, rigid packaging marked ``NONSPILLABLE BATTERY'' (unless fully enclosed in a rigid housing that is properly marked); (C) Is removed and placed in a strong, rigid packaging marked with the words ``not restricted'' in accordance with paragraph (c)(2) of Sec. 172.102(c)(1), Special provision 130, of this subchapter; or (D) Is handled in accordance with paragraph (a)(16)(iv) of this section. * * * * * (18) Except as provided in Sec. 173.21 of this subchapter, portable electronic devices (for example, watches, calculating machines, cameras, cellular phones, lap-top and notebook computers, camcorders, etc.) containing cells or batteries (including lithium cells or batteries) and spare batteries and cells for these devices, when carried by passengers or crew members for personal use. Each spare#

Passage 272battery must be individually protected so as to prevent short circuits (by placement in original retail packaging or by otherwise insulating terminals, e.g., by taping over exposed terminals or placing each battery in a separate plastic bag or protective pouch) and carried in carry-on baggage only. In addition, each installed or spare battery must comply with the following: * * * (iii) For a non-spillable battery, the battery and equipment must conform to Sec. 173.159(d). Each battery must not exceed a voltage greater than 12 volts and a watt-hour rating of not more than 100 Wh. No more than two individually protected spare batteries may be carried. Such equipment and spare batteries must be carried in checked or carry- on baggage. (19) * * * (vii) Each fuel cell and fuel cell cartridge must conform to IEC 62282-6-100 and Amend. 1 (IBR; see Sec. 171.7 of this subchapter) and must be marked with a manufacturer's certification that it conforms to the specification. In addition, each fuel cell cartridge must be marked with the maximum quantity and type of fuel in the cartridge; (viii) Interaction between fuel cells and integrated batteries in a device must conform to IEC/PAS 62282-6-100 and Amend. 1 (IBR, see Sec. 171.7 of this subchapter). Fuel cells whose sole function is to charge a battery in the device are not permitted; and * * * (20) Permeation devices for calibrating air quality monitoring equipment when carried in checked baggage provided the devices are constructed and packaged in accordance with Sec. 173.175. (21) An internal combustion or fuel cell engine or a machine or apparatus containing an internal combustion or fuel cell engine when carried as checked baggage, provided-- (i) The engine contains no liquid or gaseous fuel. An engine may be considered as not containing fuel when the engine components and any fuel lines have been completed drained, sufficiently cleaned of residue, and purged of vapors to remove any potential hazard and the engine when held in any orientation will not release any liquid fuel; (ii) The fuel tank contains no liquid or gaseous fuel. A fuel tank may be considered as not containing fuel when the fuel tank and the fuel lines have been completed drained, sufficiently cleaned of residue, and purged of vapors to remove any potential hazard; (ii) It is not equipped with a wet battery (including a non- spillable battery), a#

Passage 273sodium battery or a lithium battery; and (iv) It contains no other hazardous materials subject to the requirements of this subchapter. (22) Non-infectious specimens transported in accordance with Sec. 173.4b(b). (23) Insulated packagings containing refrigerated liquid nitrogen when carried in checked or carry-on baggage in accordance with the ICAO Technical Instructions (IBR, see Sec. 171.7 of this subchapter), Packing Instruction 202, the packaging specifications in part 6, chapter 5, and special provision A152. (24) Small cartridges fitted into devices with no more than four small cylinders of carbon dioxide or other suitable gas in in Division 2.2. The water capacity of each cylinder must not exceed 50 mL (equivalent to a 2.8 g carbon dioxide cartridge), with the approval of the operator. * * * * * 0 70. The authority citation for part 176 continues to read as follows: Authority: 49 U.S.C. 5101-5128; 49 CFR 1.53. 0 71. In Sec. 176.2, definitions for Closed cargo transport unit for Class 1 (explosive) materials, Potential or possible sources of ignition, and Protected from sources of heat are added in alphabetical order to read as follows:#

Passage 274* * * * * Closed cargo transport unit for Class 1 (explosive) materials means a freight container or transport vehicle that fully encloses the contents by permanent structures and can be secured to the ship's structure and are, except for the carriage of division 1.4 explosives, structurally serviceable (see Sec. 176.172). Portable magazines conforming to Sec. 176.137 are also considered closed cargo transport units for Class 1. Small compartments such as deck houses and mast lockers are included. Cargo transport units with fabric sides or tops are not closed cargo transport units. The floor of any closed cargo transport unit must either be constructed of wood, close-boarded or so arranged that goods are stowed on sparred gratings, wooden pallets or dunnage. * * * * * Potential or possible sources of ignition means, but is not limited to, open fires, machinery exhausts, galley uptakes, electrical outlets and electrical equipment including those on refrigerated or heated cargo transport units unless they are of a type designed to operate in a hazardous environment. * * * * * Protected from sources of heat means that packages and cargo transport units must be stowed at least 2.4 m from heated ship structures, where the surface temperature is liable to exceed 131[deg]F (55[deg]C). Examples of heated structures are steam pipes, heating coils, top or side walls of heated fuel and cargo tanks, and bulkheads of machinery spaces. In addition, packages not loaded inside a cargo transport unit and stowed on deck must be shaded from direct sunlight. The surface of a cargo transport unit can heat rapidly when in direct sunlight in nearly windless conditions and the cargo may also become heated. Depending on the nature of the goods in the cargo transport unit, and the planned voyage, precautions must be taken to ensure that exposure to direct sunlight is reduced. * * * * * 0 72. In Sec. 176.63, paragraphs (a), (b), and (e) are revised to read as follows:#

Passage 275(a) The table in Sec. 172.101 of this subchapter specifies generally the locations authorized for stowage of the various hazardous materials on board vessels. This part prescribes additional requirements with respect to the stowage of specific hazardous materials in addition to those authorized in Sec. 172.101 of this subchapter. This section sets forth the basic physical requirements for the authorized locations. Hazardous materials offered for transport as limited quantities are allocated stowage category A and are not subject to any of the specific stowage requirements indicated in column 10B in Sec. 172.101 of this subchapter for the material being transported. (b) To qualify as ``on deck'' stowage, the location must be on the weather deck. If the location is in a house on the weather deck, the location must have a permanent structural opening to the atmosphere, such as a door, hatch, companionway or manhole, and must be vented to the atmosphere. The location may not have any structural opening to any living quarters, cargo, or other compartment unless the opening has means for being closed off and secured. Any deck house containing living quarters, a steering engine, a refrigerating unit, a refrigerated stowage box, or a heating unit may not be used unless that area is isolated from the cargo stowage area by a permanent, and tight, metallic bulkhead. Stowage in a shelter or 'tween deck is not considered to be ``on deck''. A barge that is vented to the atmosphere and is stowed on deck on a barge-carrying ship is considered to be ``on deck''. When an entry in Sec. 172.101 of this subchapter requires ``on-deck'' stowage and is qualified by the requirement ``protected from sources of heat'', the stowage must be protected from the direct rays of the sun by means of structural erections or awnings except that such protection is not required for shipment in portable tanks. * * * * * (e) Notwithstanding the stowage provisions given in the table in Sec. 172.101 of this subchapter, empty packages containing residue, including IBCs and large packages, may be stowed ``on deck'' or ``under deck'' in a mechanically ventilated cargo space. However, empty pressure receptacles containing residue that carry a label of class 2.3 must be stowed ``on deck'' and waste aerosols must be stowed in accordance with the table in Sec. 172.101 of this subchapter. * * * * *#

Passage 2760 73. In Sec. 176.76, paragraph (a)(11) is added to read as follows: Sec. 176.76 Transport vehicles, freight containers, and portable tanks containing hazardous materials. (a) * * * (11) When packages are secured with banding or straps, these restraints must not be over-tightened to cause damage or deformation of the packages or the securing points (such as D-rings) within the freight container or transport vehicle. * * * * * 0 74. In Sec. 176.83 paragraphs (m)(1) through (3) are revised to read as follows: * * * * * (m) * * * (1) For the purpose of segregation, materials having certain similar chemical properties have been grouped together in segregation groups. The segregation groups (such as ``acids'', ``chlorates'', ``permanganates'') and the entries allocated to each of these groups include the substances identified in section 3.1.4 of the IMDG Code (IBR, see Sec. 171.7 of this subchapter). When column (10B) of the Sec. 172.101 Table refers to a numbered stowage provision set forth in Sec. 176.84(b) such as ``Stow `away from' acids'', that particular stowage/segregation requirement applies to all the materials allocated to the respective segregation group. (2) Not all hazardous materials falling within a segregation group are listed by name in the regulations. These materials are shipped under ``n.o.s.'' entries. Although these ``n.o.s.'' entries are not listed themselves in the above groups, the person who offers a hazardous material for transportation must decide whether allocation under a segregation group is appropriate. (3) The segregation groups described above do not address materials that fall outside the classification criteria of the hazardous materials regulations, although it is recognized that some non- hazardous materials have certain chemical properties similar to hazardous materials listed in the segregation groups. A person who offers a hazardous material for transportation or the person responsible for packing the materials into a cargo transport unit who does have knowledge of the chemical properties of such non-hazardous materials may identify a relevant segregation group and apply the segregation requirements for that segregation group.#

Passage 2770 75. In Sec. 176.84: 0 a. Paragraph (a) is revised; 0 b. In the table of provisions in paragraph (b), Stowage provisions 19, 48, and 50 are removed and Stowage provisions 25 and 128 are revised; and 0 c. In paragraph (c)(2), stowage provisions 7E, 8E and 20E are removed, and Stowage provision 26E is revised. The revisions read as follows: Sec. 176.84 Other requirements for stowage and segregation for cargo vessels and passenger vessels. (a) General. When Column 10B of the Sec. 172.101 Table refers to a numbered or alpha-numeric stowage provision for water shipments, the meaning and requirements of that provision are set forth in this section. Terms in quotation marks are defined in Sec. 176.83. Other terms used in the table in this section such as ``acids'', ``chlorates'' and ``permanganates'' indicate different chemical groups referred to here as segregation groups. Materials falling within a segregation group are considered to have certain similar chemical properties and, although not exhaustive in nature, the materials belonging to each group include those substances identified in section 3.1.4 of the IMDG Code (IBR, see Sec. 171.7 of this subchapter) as set forth in Sec. 176.83(m). (b) Table of provisions: ------------------------------------------------------------------------ Code Provisions ------------------------------------------------------------------------ * * * * * 25................................ Protected from sources of heat * * * * * 128............................... Stow in accordance with the IMDG Code, Sub-section 7.6.2.7.2 (incorporated by reference; see Sec. 171.7 of this subchapter). * * * * * ------------------------------------------------------------------------ ------------------------------------------------------------------------ Notes Provisions ------------------------------------------------------------------------ * * * * * 26E............................... For closed cargo transport units, a non-metallic lining is required when not in effectively sealed, sift-proof packages. * * * * * ------------------------------------------------------------------------ 0 76. In Sec. 176.116, paragraph (a) is revised and (f) is removed and reserved. Sec. 176.116 General stowage conditions for class 1 (explosive) materials.#

Passage 278* * * * * (a) Stowage Location: (1) Class 1 (explosive) materials must be stowed in a cool part of the ship and must be kept as cool as practicable while on board. Class 1 (explosives) must be stowed as far away as practicable from any potential source of heat or ignition. (2) With the exception of division 1.4 (explosive) materials, Class 1 (explosive) materials may not be positioned closer to the ship's side than a distance equal to one eighth of the beam or 2.4 m (8 feet), whichever is less. (3) Except where the consignment of Class 1 (explosive) materials consists only of explosive articles, the wearing of shoes or boots with unprotected metal nails, heels, or tips of any kind is prohibited. * * * * * 0 82. In Sec. 176.138, paragraph (b) is revised to read as follows: * * * * * (b) Class 1 (explosives) may not be stowed within a horizontal distance of 6 m (20 feet) from any source of heat and any possible sources of ignition. With the exception of division 1.4 (explosive) materials, Class 1 (explosives) materials may not be stowed within a horizontal distance of 12 m (39 feet) from the bridge, accommodation areas, and lifesaving appliances. * * * * * 0 83. In Sec. 176.144: 0 a. Note 1 in Table (a) is revised; and 0 b. Paragraph (d) is revised. The revisions read as follows: Sec. 176.144 Segregation of Class 1 (explosive) materials. Notes: 1. Explosive articles in compatibility group G, other than fireworks, may be stowed with articles of compatibility groups C, D, and E, provided no explosive substances are carried in the same compartment, magazine or cargo transport unit. * * * * * (d) If some of the Class 1 (explosive) materials in a stowage mixture require non-metallic lining of the closed cargo transport unit, Class 1 (explosive) materials requiring ordinary stowage may be stowed in the same closed cargo transport. When a closed cargo transport unit is used for such substances that require non-metallic lining of the closed cargo transport unit, the other Class 1 (explosive) materials stowed therein must have no exposed parts of any ferrous metal or aluminum alloy, unless separated by a partition. * * * * * 0 84. In Sec. 176.146, paragraphs (a) and (b) are revised and paragraph (c) is removed and reserved. The revisions read as follows: Sec. 176.146 Segregation from non-hazardous materials.#

Passage 279(a) Except as required by paragraph (b) of this section, Class 1 (explosive) materials need not be segregated from other cargo of a non- dangerous nature. (b) Readily combustible materials may not be stowed in the same compartment or hold as Class 1 (explosive) materials other than those in compatibility group S. * * * * * 0 85. In Sec. 176.170, paragraph (a) is revised and paragraph (c) is removed and resereved. The revision reads as follows: Sec. 176.170 Transport of Class 1 (explosive) materials in freight containers. (a) When Class 1 (explosive) materials are stowed in a freight container, the freight container, for the purposes of this subpart, may be regarded as a closed transport unit for class 1 or a magazine but not a separate compartment. * * * * * 0 86. In Sec. 176.200, paragraph (c) is revised to read as follows: Sec. 176.200 General stowage requirements. * * * * * (c) When cylinders of Class 2 (compressed gas) materials being transported by vessel are stowed in a vertical position they must be stowed in a block and cribbed or boxed-in with suitable sound lumber and the box or crib dunnaged to provide clearance from a steel deck at least 10 cm (3.9 inches) off any metal deck. Pressure receptacles in the box or crib must be braced to prevent any shifting of the pressure receptacles. The box or crib (gas rack) must be securely chocked and lashed to prevent movement in any direction. * * * * * 0 87. Section 176.210 is revised to read as follows: Sec. 176.210 On deck stowage requirements. Cylinders of Class 2 (compressed gas) materials being transported by vessel must be protected from sources of heat. A tarpaulin covering the cylinders is not acceptable if it comes in contact with them. 0 88. Section 176.230 is revised to read as follows: Sec. 176.230 Stowage of Division 2.1 (flammable gas) materials. Division 2.1 (flammable gas) materials transported in Specification 106A or 110A multi-unit car tanks must be stowed on deck only, and must be protected from sources of heat. 0 89. In Sec. 176.305, paragraph (a) is revised to read as follows: Sec. 176.305 General stowage requirements. (a) A Class 3 (flammable) or combustible liquid must be kept as cool as reasonably practicable, protected from sources of heat, and away from potential sources of ignition. * * * * *#

Passage 2800 90. In Sec. 176.400, paragraphs (a) and (b) are revised to read as follows: Sec. 176.400 Stowage of Division 1.5, Class 4 (flammable solids) and Class 5 (oxidizers and organic peroxides) materials. (a) Class 4 (flammable solid) material and Division 5.2 (organic peroxide) material must be kept as cool as reasonably practicable, protected from sources of heat, and away from potential sources of ignition. (b) Division 5.2 (organic peroxide) material must be stowed away from living quarters or access to them. Division 5.2 (organic peroxide) material not requiring temperature control must be protected from sources of heat, including radiant heat and strong sunlight, and must be stowed in a cool, well-ventilated area. * * * * * 0 91. In Sec. 176.600, paragraph (d) is revised to read as follows: Sec. 176.600 General stowage requirements. * * * * * (d) Each package of Division 2.3 (poisonous gas) material or Division 6.1 (poison) material that also bears a FLAMMABLE LIQUID or FLAMMABLE GAS label must be stowed in a mechanically ventilated space, kept as cool as reasonably practicable, and be protected from sources of heat and stowed away from potential sources of ignition. 0 92. The heading for Subpart O is revised to read as follows: Subpart O--Detailed Requirements for Cotton and Vegetable Fibers, Motor Vehicles, Polymeric Beads, and Plastic Molding Compounds 0 93. Section 176.907 is added to read as follows: Sec. 176.907 Polymeric Beads and Plastic Molding Compounds.#

Passage 281(a) When transported in cargo transport units, the cargo transport units must provide an adequate exchange of air in the unit. This adequate exchange of air may be accomplished by utilizing a ventilated container, an open-top container, or a container in one door off operation. When cargo transport units with venting devices are used these devices should be kept clear and operable. If mechanical devices are used for ventilation, they must be explosion-proof. (b) As an alternative to the options presented in paragraph (a) of this section to ensure an adequate exchange of air; a refrigerated cargo transport unit may be used. (c) The requirements in paragraph (a) and (b) of this section do not apply if the hazardous material is: (1) Packed in hermetically sealed packagings or IBC's which conform to packing group II performance level for liquid dangerous goods with a total pressure in the packaging (i.e., the vapor pressure of the material plus the partial pressure of air or other inert gases, less 100kPa (15 psia)) at 55 [deg]C (131 [deg]F), determined on the basis of the hazardous material not completely filling the receptacle at a temperature of 55 [deg]C (131 [deg]C) or less at a filling temperature of 15 [deg] C (59 [deg]F), will not exceed two-thirds of the marked test pressure. (2) [Reserved] (d) Cargo transport units must be marked with a warning mark including the words ``CAUTION--MAY CONTAIN FLAMMABLE VAPOR'' or ``CAUTION--MAY CONTAIN FLAMMABLE VAPOUR'' with lettering having a height of at least 25 mm (1 inch). The mark must be affixed to each access point in a location where it will be easily seen by persons prior to opening or entering the cargo transport unit and must remain on the cargo transport unit until the following provisions are met: (1) The cargo transport unit has been completely ventilated to remove any hazardous concentrations of vapor or gas; (2) The immediate vicinity of the cargo transport unit is clear of any source of ignition; and (3) The hazardous materials have been unloaded. 0 94. The authority citation for part 178 continues to read as follows: Authority: 49 U.S.C. 5101-5128; 49 CFR 1.53.#

Passage 2820 95. In Sec. 178.71, paragraph (d)(2) is revised to read as follows: * * * * * (d) * * * (2) Service equipment must be configured or designed to prevent damage that could result in the release of the pressure receptacle contents during normal conditions of handling and transport. Manifold piping leading to shut-off valves must be sufficiently flexible to protect the valves and the piping from shearing or releasing the pressure receptacle contents. The filling and discharge valves and any protective caps must be secured against unintended opening. The valves must conform to ISO 10297 (IBR, see Sec. 171.7 of this subchapter), or ISO 13340 (IBR, see Sec. 171.7 of this subchapter) for non-refillable pressure receptacles, and be protected as specified in Sec. 173.301b(f) of this subchapter. * * * * * 0 96. In Sec. 178.274: 0 a. In paragraph (f)(1)(v), the second sentence is revised; 0 b. Paragraph (f)(1)(vi) is redesignated as paragraph (f)(1)(vii); and 0 c.New paragraph (f)(1)(vi) is added. The addition and revisions read as follows: Sec. 178.274 Specifications for UN portable tanks. * * * * * (f) * * * (1) * * * (v) * * * For spring loaded pressure relief devices, the rated flow capacity must be determined according to ISO 4126-1 (including Technical Corrigendum 1) and ISO 4126-7 (IBR, see Sec. 171.7 of this subchapter); (vi) The cross sectional flow areas of the spring loaded pressure relief devices, frangible discs, and fusible elements in mm\2\; and * * * * * 0 97. In Sec. 178.512, the section heading, paragraph (a), and paragraph (b) introductory text are revised to read as follows: Sec. 178.512 Standards for steel, aluminum or other metal boxes. (a) The following are identification codes for steel, aluminum, or other metal boxes: (1) 4A for a steel box; (2) 4B for an aluminum box; and (3) 4N for an other metal box. (b) Construction requirements for steel, aluminum or other metal boxes are as follows: * * * * * 0 98. In Sec. 178.603, revise the second entry in the table in paragraph (a) and revise paragraph (b) to read as follows: ------------------------------------------------------------------------ Number of tests Drop orientation of Packaging (samples) samples ------------------------------------------------------------------------#

Passage 283* * * * * * * Boxes of natural wood, Plywood Five--(one for First drop: Flat on boxes, Reconstituted wood each drop). the bottom (using boxes, Fiberboard boxes, the first sample). Plastic boxes, Steel, Second drop: Flat on aluminum or other metal the top (using the boxes, Composite packagings second sample). that are in the shape of a Third drop: Flat on box. the long side (using the third sample). Fourth drop: Flat on the short side (using the fourth sample). Fifth drop: On a corner (using the fifth sample). * * * * * * * ------------------------------------------------------------------------ (b) Exceptions. For testing of single or composite packagings constructed of stainless steel, nickel, or monel at periodic intervals only (i.e., other than design qualification testing), the drop test may be conducted with two samples, one sample each for the two drop orientations. These samples may have been previously used for the hydrostatic pressure or stacking test. Exceptions for the number of steel, aluminum and other metal packaging samples used for conducting the drop test are subject to the approval of the Associate Administrator. * * * * * 0 99. In Sec. 178.705, paragraph (a)(3) is revised to read as follows: (a) * * * (3) 31A, 31B, 31N for liquids. * * * * * 0 100. In Sec. 178.910, paragraph (a)(1) introductory text is revised and paragraph (b) is added to read as follows: Sec. 178.910 Marking of Large Packagings. (a) * * * (1) Mark every Large Packaging in a durable and clearly visible manner. The marking may be applied in a single line or in multiple lines provided the correct sequence is followed with the information required by this section, in letters, numerals, and symbols of at least 12 mm in height. This minimum marking size requirement applies only to large packages manufactured after January 1, 2014. The following information is required in the sequence presented: * * * * * (b) All Large Packages manufactured, repaired or remanufactured after January 1, 2015 must be marked with the symbol applicable to a Large Package designed for stacking or not designed for stacking, as appropriate. The symbol must be not less than 100 mm by 100 mm as follows: [GRAPHIC] [TIFF OMITTED] TR07JA13.001#

Passage 2840 101. In Sec. 178.980, paragraphs (e)(2) and (3) are redesignated as paragraphs (e)(3) and (4), respectively, and a new paragraph (e)(2) is added to read as follows: * * * * * (e) * * * (2) For fiberboard or wooden Large Packagings, there may be no loss of contents and no permanent deformation that renders the whole Large Packaging, including the base pallet, unsafe for transportation. * * * * * 0 102. Subpart R is added to read as follows: Subpart R--Flexible Bulk Container Standards Sec. 178.1000 Purpose and scope. 178.1005 Flexible Bulk Container identification code. 178.1010 Marking of Flexible Bulk Containers. 178.1015 General Flexible Bulk Container standards. 178.1020 Period of use for transportation of hazardous materials in Flexible Bulk Containers. Subpart R--Flexible Bulk Container Standards (a) This subpart prescribes requirements for Flexible Bulk Containers (FBCs) intended for the transportation of hazardous materials. FBC standards in this subpart are based on the UN Model Regulations. (b) Terms used in this subpart are defined in Sec. 171.8 of this subchapter. Sec. 178.1005 Flexible Bulk Container identification code. The Flexible Bulk Container code designation is BK3. Sec. 178.1010 Marking of Flexible Bulk Containers.#

Passage 285(a) The manufacturer must: (1) Mark every Flexible Bulk Container in a durable and clearly visible manner. The marking may be applied in a single line or in multiple lines provided the correct sequence is followed with the information required by this section. The following information is required in the sequence presented: (i) Except as provided in Sec. 178.503(e)(1)(ii), the United Nations packaging symbol as illustrated in Sec. 178.503(e)(1)(i). (ii) The code number designating the Flexible Bulk Container design type according to Sec. 178.1005. The letter ``W'' must follow the Flexible Bulk Container design type identification code on a Flexible Bulk Container when the Flexible Bulk Container differs from the requirements in subpart R of this part, or is tested using methods other than those specified in this subpart, and is approved by the Associate Administrator in accordance with Sec. 178.1035; (iii) The capital letter Z identifying that the Flexible Bulk Container meets Packing Group III performance standard under which the design type has been successfully tested. (iv) The month (designated numerically) and year (last two digits) of manufacture; (v) The country authorizing the allocation of the mark. The letters ``USA'' indicate that the Flexible Bulk Container is manufactured and marked in the United States in compliance with the provisions of this subchapter. (vi) The name and address or symbol of the manufacturer or the approval agency certifying compliance with subpart R and subpart S of this part. Symbols, if used, must be registered with the Associate Administrator. (vii) The stacking test load in kilograms (kg). For Flexible Bulk Containers not designed for stacking the figure ``0'' must be shown. (viii) The maximum permissible gross mass in kg. (2) The following is an example of symbols and required markings for a Flexible Bulk container suitable for stacking; stacking load: 1,000 kg; maximum gross mass: 2,500 kg. [GRAPHIC] [TIFF OMITTED] TR07JA13.002 Sec. 178.1015 General Flexible Bulk Container standards.#

Passage 286(a) Each Flexible Bulk Containers must be sift-proof and completely closed during transport to prevent the release of contents and waterproof. (b) Parts of the Flexible Bulk Container that are in direct contact with hazardous materials: (1) Must not be affected or significantly weakened by those hazardous materials. (2) Must not cause a dangerous effect with the dangerous goods (e.g., catalyzing a reaction or reacting with the hazardous materials). (3) Must not allow permeation of the hazardous materials that could constitute a danger under conditions normally incident to transportation. (c) Filling and discharge devices must be so constructed as to be protected against damage during transport and handling. The filling and discharge devices must be capable of being secured against unintended opening. (d) Slings of the Flexible Bulk Container, if fitted with such, must withstand pressure and dynamic forces which can be expected under conditions normally incident to transportation. (e) Handling devices must be strong enough to withstand repeated use. (f) A venting device must be fitted to Flexible Bulk Containers intended to transport hazardous materials that may develop dangerous accumulation of gases within the Flexible Bulk Container. Any venting device must be designed so that external foreign substances are prevented from entering the Flexible Bulk Container through the venting device under conditions normally incident to transportation. Sec. 178.1020 Period of use for transportation of hazardous materials in Flexible Bulk Containers. The use of Flexible Bulk Containers for the transport of hazardous materials is permitted for a period of time not to exceed two years from the date of manufacture of the Flexible Bulk Container. 0 103. Subpart S is added to read as follows: Subpart S--Testing of Flexible Bulk Containers Sec. 178.1030 Purpose and scope. 178.1035 General requirements. 178.1040 Preparation of Flexible Bulk Containers for testing. 178.1045 Drop test. 178.1050 Top lift test. 178.1055 Stacking test. 178.1060 Topple test. 178.1065 Righting test. 178.1070 Tear test. Subpart S----Testing of Flexible Bulk Containers This subpart prescribes certain testing requirements for Flexible Bulk Containers identified in subpart R of this part.#

Passage 287(a) General. The test procedures prescribed in this subpart are intended to ensure that Flexible Bulk Containers containing hazardous materials can withstand normal conditions of transportation. These test procedures are considered minimum requirements. Each packaging must be manufactured and assembled so as to be capable of successfully passing the prescribed tests and to conform to the requirements of Sec. 173.24 of this subchapter while in transportation. (b) Responsibility. The Flexible Bulk Container manufacturer is responsible for ensuring each Flexible Bulk Containers is capable of passing the prescribed tests. To the extent a Flexible Bulk Container's assembly function, including final closure, is performed by the person who offers a hazardous material for transportation, that person is responsible for performing the function in accordance with Sec. Sec. 173.22 and 178.2 of this subchapter. (c) Definitions. For the purpose of this subpart: (1) Flexible Bulk Container design type refers to a Flexible Bulk Container that does not differ in structural design, size, material of construction and packing. (2) Design qualification testing is the performance of the drop, topple, righting, tear, stacking, and top-lift tests prescribed in this subpart, for each different Flexible Bulk Container design#

Passage 288type, at the start of production of that packaging. (3) Periodic design requalification test is the performance of the applicable tests specified in paragraph (c)(2) of this section on a Flexible Bulk Container design type, to requalify the design for continued production at the frequency specified in paragraph (e) of this section. (4) Production inspection is the inspection that must initially be conducted on each newly manufactured Flexible Bulk Container. (5) Different Flexible Bulk Container design type is one that differs from a previously qualified Flexible Bulk Container design type in structural design, size, material of construction, wall thickness, or manner of construction, but does not include: (i) A packaging that differs in surface treatment; (ii) A packaging that differs only in its lesser external dimensions (i.e., height, width, length) provided materials of construction and material thickness or fabric weight remain the same; (d) Design qualification testing. The packaging manufacturer must achieve successful test results for the design qualification testing at the start of production of each new or different Flexible Bulk Container design type. Application of the certification mark by the manufacturer constitutes certification that the Flexible Bulk Container design type passed the prescribed tests in this subpart. (e) Periodic design requalification testing. (1) Periodic design requalification must be conducted on each qualified Flexible Bulk Container design type if the manufacturer is to maintain authorization for continued production. The Flexible Bulk Container manufacturer must achieve successful test results for the periodic design requalification at sufficient frequency to ensure each packaging produced by the manufacturer is capable of passing the design qualification tests. Design requalification tests must be conducted at least once every 24 months. (2) Changes in the frequency of design requalification testing specified in paragraph (e)(1) of this section are authorized if approved by the Associate Administrator. (f) Test samples. The manufacturer must conduct the design qualification and periodic tests prescribed in this subpart using random samples of packagings, in the numbers specified in the appropriate test section. (g) Proof of compliance. In addition to the periodic design requalification testing intervals specified in#

Passage 289paragraph (e) of this section, the Associate Administrator, or a designated representative, may at any time require demonstration of compliance by a manufacturer, through testing in accordance with this subpart, to ensure packagings meet the requirements of this subpart. As required by the Associate Administrator, or a designated representative, the manufacturer must either: (1) Conduct performance tests or have tests conducted by an independent testing facility, in accordance with this subpart; or (2) Make a sample Flexible Bulk Container available to the Associate Administrator, or a designated representative, for testing in accordance with this subpart. (h) Record retention. Following each design qualification test and each periodic retest on a Flexible Bulk Container, a test report must be prepared. The test report must be maintained at each location where the Flexible Bulk Container is manufactured and each location where the design qualification tests are conducted, for as long as the Flexible Bulk Container is produced and for at least two years thereafter, and at each location where the periodic retests are conducted until such tests are successfully performed again and a new test report produced. In addition, a copy of the test report must be maintained by a person certifying compliance with this part. The test report must be made available to a user of a Flexible Bulk Container or a representative of the Department upon request. The test report, at a minimum, must contain the following information: (1) Name and address of test facility; (2) Name and address of applicant (where appropriate); (3) A unique test report identification; (4) Date of the test report; (5) Manufacturer of the packaging; (6) Description of the flexible bulk container design type (e.g., dimensions materials, closures, thickness, etc.), including methods of manufacture (e.g., blow molding) and which may include drawing(s) and/ or photograph(s); (7) Maximum capacity; (8) Characteristics of test contents (e.g., particle size for solids); (9) Mathematical calculations performed to conduct and document testing (e.g., drop height, test capacity, outage requirements, etc.); (10) Test descriptions and results; and (11) Signature with the name and title of signatory. Sec. 178.1040 Preparation of Flexible Bulk Containers for testing.#

Passage 290(a) Except as otherwise provided in this subchapter, each Flexible Bulk Container must be closed in preparation for testing and tests must be carried out in the same manner as if prepared for transportation. All closures must be installed using proper techniques and torques. (b) If the material to be transported is replaced for test purposes by a non-hazardous material, the physical properties (grain, size, viscosity) of the replacement material used that might influence the results of the required tests must correspond as closely as possible to those of the hazardous material to be transported. It is permissible to use additives, such as bags of lead shot, to achieve the requisite total package mass, so long as they do not affect the test results. (a) General. The drop test must be conducted for the qualification of all Flexible Bulk Container design types and performed periodically as specified in Sec. 178.1035(e) of this subpart. (b) Special preparation for the drop test. Flexible Bulk Containers must be filled to their maximum permissible gross mass. (c) Test method. (1) A sample of all Flexible Bulk Container design types must be dropped onto a rigid, non-resilient, smooth, flat and horizontal surface. This test surface must be large enough to be immovable during testing and sufficiently large enough to ensure that the test Flexible Bulk Container falls entirely upon the surface. The test surface must be kept free from local defects capable of influencing the test results. (2) Following the drop, the Flexible Bulk Container must be restored to the upright position for observation. (d) Drop height. (1) For all Flexible Bulk Containers, drop heights are specified as follows: Packing group III: 0.8 m (2.6 feet) (2) Drop tests are to be performed with the solid to be transported or with a non-hazardous material having essentially the same physical characteristics. (e) Criteria for passing the test. For all Flexible Bulk Container design types there may be no loss of the filling substance. However a slight discharge (e.g., from closures or stitch holes) upon impact is not considered a failure of the Flexible Bulk Container provided that no further leakage occurs after the container has been restored to the upright position. (a) General. The top lift test must be conducted for the qualification of all of#

Passage 291Flexible Bulk Containers design types to be lifted from the top. (b) Special preparation for the top lift test. Flexible Bulk Container design types must be filled to six times the maximum permissible gross mass, the load being evenly distributed. (c) Test method. (1) A Flexible Bulk Container must be lifted in the manner for which it is designed until clear of the floor and maintained in that position for a period of five minutes. (2) If not tested as indicated in paragraph (c)(1) of this section, a Flexible Bulk Container design type must be tested as follows: (i) Fill the Flexible Bulk Container to 95% full with a material representative of the product to be shipped. (ii) Suspend the Flexible Bulk Container by its lifting devices. (iii) Apply a constant downward force through a specially designed platen. The platen will be a minimum of 60 percent and a maximum of 80 percent of the cross sectional surface area of the Flexible Bulk Container. (iv) The combination of the mass of the filled Flexible Bulk Container and the force applied through the platen must be a minimum of six times the maximum net mass of the Flexible Bulk Container. The test must be conducted for a period of five minutes. (v) Other equally effective methods of top lift testing and preparation may be used with approval of the Associate Administrator. (d) Criteria for passing the test. For all Flexible Bulk Containers design types designed to be lifted from the top, there may be no damage to the Flexible Bulk Container or its lifting devices that renders the Flexible Bulk Container unsafe for transport, and no loss of contents.#

Passage 292(a) General. The stacking test must be conducted for the qualification of all Flexible Bulk Containers design types. (b) Special preparation for the stacking test. All Flexible Bulk Containers design types must be loaded to their maximum permissible gross mass. (c) Test method. (1) All Flexible Bulk Containers must be placed on their base on level, hard ground and subjected to a uniformly distributed superimposed test load that is four times the design type maximum gross weight for a period of at least twenty-four hours. (2) For all Flexible Bulk Containers, the load must be applied by one of the following methods: (i) Four Flexible Bulk Containers of the same type loaded to their maximum permissible gross mass and stacked on the test Flexible Bulk Container; (ii) The calculated superimposed test load weight loaded on either a flat plate or a reproduction of the base of the Flexible Bulk Container, which is stacked on the test Flexible Bulk Container. (d) Criteria for passing the test. There may be no deterioration that renders the Flexible Bulk Container unsafe for transportation and no loss of contents during the test or after removal of the test load. (a) General. The topple test must be conducted for the qualification of all Flexible Bulk Containers design types. (b) Special preparation for the topple test. Flexible Bulk Container design types must be filled to their maximum permissible gross mass, the load being evenly distributed. (c) Test method. Samples of all Flexible Bulk Container design types must be toppled onto any part of its top by lifting the side furthest from the drop edge upon a rigid, non-resilient, smooth, flat and horizontal surface. This test surface must be large enough to be immovable during testing and sufficiently large enough to ensure that the test Flexible Bulk Container falls entirely upon the surface. The test surface must be kept free from local defects capable of influencing the test results. (d) Topple height. (1) For all Flexible Bulk Containers, topple heights are specified as follows: Packing group III: 0.8 m (2.6 feet). (e) Criterion for passing the test. For all Flexible Bulk Container design types there may be no loss of the filling substance. However a slight discharge (e.g., from closures or stitch holes) upon impact is not considered a failure of the Flexible Bulk Container.#

Passage 293(a) General. The righting test must be conducted for the qualification of all Flexible Bulk Containers design types designed to be lifted from the top or side. (b) Special preparation for the righting test. Flexible Bulk Container design types must be filled to not less than 95% of their capacity and to their maximum permissible gross mass, the load being evenly distributed. (c) Test method. A sample Flexible Bulk Container design type must be tested; the Flexible Bulk Container should start lying on its side and then must be lifted at a speed of at least 0.1m/s (0.328 ft/s) to an upright position clear of the floor, by no more than half of the lifting devices. (d) Criterion for passing the test. For all Flexible Bulk Container design types there must be no damage that renders the Flexible Bulk Container unsafe for transport or handling. (a) General. The tear test must be conducted for the qualification of all of Flexible Bulk Containers design types. (b) Special preparation for the tear test. Flexible Bulk Container design types must be filled its maximum permissible gross mass, the load being evenly distributed. (c) Test method. (1) A Flexible Bulk Container design type must be placed on the ground and a 300 mm (11.9 in) cut shall be made. This 300 mm (11.9 in) cut must: (i) Completely penetrate all layers of the Flexible Bulk Container on a wall with a wide face. (ii) Be made at a 45[deg] angle to the principal axis of the Flexible Bulk Container, halfway between the bottom surface and the top level of the contents. (2) The Flexible Bulk Container after being cut according to the provisions of Sec. 178.1070(c)(1), must be subjected to a uniformly distributed superimposed load equivalent to twice the maximum gross mass of the package. This load must be applied for at least fifteen minutes. Flexible Bulk Containers that are designed to be lifted from the top or the side must, after removal of the superimposed load, be lifted clear of the floor and maintained in that position for a period of fifteen minutes. (d) Criterion for passing the test. For all Flexible Bulk Container design types, the cut must not spread more than an additional 25% of its original length.#

Passage 294Issued in Washington, DC, on December 20, 2012 under authority delegated in 49 CFR part 106. Cynthia L. Quarterman, Administrator. [FR Doc. 2012-31243 Filed 12-31-12; 4:15 pm] BILLING CODE 4910-60-P#