RegulusPipeline research88 FR 43010
Passage 1[Federal Register Volume 88, Number 127 (Wednesday, July 5, 2023)] [Notices] [Pages 43010-43011] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2023-14154] ----------------------------------------------------------------------- Pipeline and Hazardous Materials Safety Administration Hazardous Materials: Notice of Applications for Modification to Special Permits AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: List of applications for modification of special permits. ----------------------------------------------------------------------- SUMMARY: In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations, notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein. DATES: Comments must be received on or before July 20, 2023. ADDRESSES: Record Center, Pipeline and Hazardous Materials Safety Administration, U.S. Department of Transportation, Washington, DC 20590. Comments should refer to the application number and be submitted in triplicate. If confirmation of receipt of comments is desired, include a self-addressed stamped postcard showing the special permit number. FOR FURTHER INFORMATION CONTACT: Donald Burger, Chief, Office of Hazardous Materials Safety General Approvals and Permits Branch, Pipeline and Hazardous Materials Safety Administration, U.S. Department of Transportation, East Building, PHH-13, 1200 New Jersey Avenue Southeast, Washington, DC 20590-0001, (202) 366-4535. SUPPLEMENTARY INFORMATION: Each mode of transportation for which a particular special permit is requested is indicated by a number in the ``Nature of Application'' portion of the table below as follows: 1-- Motor vehicle, 2--Rail freight, 3--Cargo vessel, 4--Cargo aircraft only, 5--Passenger-carrying aircraft. Copies of the applications are available for inspection in the Records Center, East Building, PHH-13, 1200 New Jersey Avenue Southeast, Washington, DC or at http://regulations.gov. This notice of receipt of applications for special permit is published in accordance with part 107 of the Federal hazardous materials transportation law (49 U.S.C. 5117(b); 49 CFR 1.53(b)).#
Passage 2Issued in Washington, DC, on June 6, 2023. Donald P. Burger, Chief, General Approvals and Permits Branch. ------------------------------------------------------------------------ Nature of the Application No. Applicant Regulation(s) special permits affected thereof ------------------------------------------------------------------------ SPECIAL PERMITS DATA ------------------------------------------------------------------------ 11911-M......... Transfer Flow, 177.834(h), To modify the Inc. 178.700(c)(1). special permit to revise the ``safe zone'' definition. (mode 1) 14163-M......... Air Liquide 173.301(g)(1)(i To modify the Electronics i). special permit to U.S. LP. authorize an additional hazardous material. (modes 1, 2, 3) 16061-M......... Cirba Solutions 172.600, To modify the Services US, 172.200, special permit to LLC. 172.300, authorize lithium 172.700(a), metal batteries 172.400, packed with 172.500, equipment and 172.102(c)(1), lithium metal 173.159a(c)(2) batteries contained , in equipment. 173.185(c)(1)( (modes 1, 3) iii), 173.185(c)(1)( iv), 173.185(c)(1)( v), 173.185(c)(3). 16318-M......... Technical 173.304(d), To modify the Chemical 173.167(a), special permit to Company. 173.306(i). authorize additional hazardous materials and transportation of the hazardous materials as limited quantities. (modes 1, 2, 3, 4, 5) 20638-M......... Sonoco Products 173.306(a)(3).. To modify the Company. special permit to authorize the inner containers to be marked ``DOT-2P'' or ``DOT-2Q'' even if the inner container does not meet the applicable DOT specification. (modes 1, 2, 3, 4, 5) 20998-M......... Daicel Safety 173.301(a)(1), To modify the Systems 173.302(a)(1), special permit to Americas, Inc. 178.65(c)(3). remove the requirement that a flattening test be conducted, authorize alternative marking, and authorize a pressure relief device designed to an alternative standard. (modes 1, 2, 3, 4, 5) ------------------------------------------------------------------------ [FR Doc. 2023-14154 Filed 7-3-23; 8:45 am] BILLING CODE 4910-60-P#
This material provides agency context. It does not replace binding regulatory text, and its legal effect depends on the underlying authority and facts.