Rulemakinghistorical
90 FR 47621
Pipeline Safety: Standards Update PPI-TR 3
Current as of 2026-01-01 Government source
Pipeline and Hazardous Materials Safety AdministrationOfficial agency material
View source 
RegulusPipeline researchRegulusPipeline research90 FR 47621
Passage 1[Federal Register Volume 90, Number 189 (Thursday, October 2, 2025)] [Rules and Regulations] [Page 47621] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2025-19333] ----------------------------------------------------------------------- Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2025-0131] RIN 2137-AG00 Pipeline Safety: Standards Update PPI-TR 3 AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), Department of Transportation (DOT). ACTION: Direct final rule (DFR); confirmation of effective date. ----------------------------------------------------------------------- SUMMARY: PHMSA is confirming the effective date for the DFR that appeared in the Federal Register on July 1, 2025. The DFR amended PHMSA's regulations at 49 CFR part 192 to incorporate by reference the updated industry standard Plastic Pipe Institute (PPI) Technical Report (TR)-3, ``Policies and Procedures for Developing Hydrostatic Design Basis (HDB), Hydrostatic Design Stresses (HDS), Pressure Design Basis (PDB), Strength Design Basis (SDB), Minimum Required Strength (MRS) Ratings, and Categorized Required Strength (CRS) for Thermoplastic Piping Materials or Pipe.'' DATES: PHMSA confirms the effective date of January 1, 2026, for the DFR that appeared in the Federal Register on July 1, 2025 (90 FR 28097). FOR FURTHER INFORMATION CONTACT: Brianna Wilson, Transportation Specialist, by phone at 771-215-0969 or email at [email protected].#
Passage 2SUPPLEMENTARY INFORMATION: On July 1, 2025 (90 FR 28097), PHMSA published a DFR amending its regulations at 49 CFR part 192 to incorporate by reference the 2024 edition of PPI TR-3, ``Policies and Procedures for Developing Hydrostatic Design Basis (HDB), Hydrostatic Design Stresses (HDS), Pressure Design Basis (PDB), Strength Design Basis (SDB), Minimum Required Strength (MRS) Ratings, and Categorized Required Strength (CRS) for Thermoplastic Piping Materials or Pipe.'' Reference to the 2024 edition of the standard will replace the existing reference to PPI TR-3/2012, ``Policies and Procedures for Developing Hydrostatic Design Basis (HDB), Hydrostatic Design Stresses (HDS), Pressure Design Basis (PDB), Strength Design Basis (SDB), Minimum Required Strength (MRS) Ratings, and Categorized Required Strength (CRS) for Thermoplastic Piping Materials or Pipe,'' issued in November 2012, within 49 CFR 192.121(a). PHMSA issued the DFR under the procedures set forth at 49 CFR 190.339. In accordance with those provisions, PHMSA stated in the DFR that if no adverse comments were received, the DFR would become final and effective on January 1, 2026. PHMSA did not receive any comments that warranted withdrawal of the DFR; therefore, this rule will become effective as scheduled. Issued in Washington, DC, on September 30, 2025, under the authority designated in 49 CFR 1.97. Benjamin D. Kochman, Deputy Administrator. [FR Doc. 2025-19333 Filed 10-1-25; 8:45 am] BILLING CODE 4910-60-P#
This material provides agency context. It does not replace binding regulatory text, and its legal effect depends on the underlying authority and facts.