90 FR 47622 - Pipeline Safety: Standards Update-ASTM F2600 | Regulus

Passage 1[Federal Register Volume 90, Number 189 (Thursday, October 2, 2025)] [Rules and Regulations] [Page 47622] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2025-19343] ----------------------------------------------------------------------- Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2025-0133] RIN 2137-AF94 Pipeline Safety: Standards Update--ASTM F2600 AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), Department of Transportation (DOT). ACTION: Direct final rule (DFR); confirmation of effective date. ----------------------------------------------------------------------- SUMMARY: PHMSA is confirming the effective date for the DFR that appeared in the Federal Register on July 1, 2025. The DFR amended PHMSA's regulations at 49 CFR part 192 to incorporate by reference ASTM International's updated industry standard ASTM F2600, ``Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing.'' DATES: PHMSA confirms the effective date of January 1, 2026, for the DFR that appeared in the Federal Register on July 1, 2025 (90 FR 28057). FOR FURTHER INFORMATION CONTACT: Brianna Wilson, Transportation Specialist, by phone at 771-215-0969 or email at [email protected]. SUPPLEMENTARY INFORMATION: On July 1, 2025 (90 FR 28057), PHMSA published a DFR amending its regulations at 49 CFR part 192 to incorporate by reference the 2023 edition of ASTM F2600, ``Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing.'' Reference to the 2023 version of the standard will replace the existing reference to ASTM F2600-09, ``Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing,'' April 1, 2009, within Section I of Appendix B to 49 CFR part 192. PHMSA issued the DFR under the procedures set forth at 49 CFR 190.339. In accordance with those provisions, PHMSA stated in the DFR that if no adverse comments were received, the DFR would become final and effective on January 1, 2026. PHMSA did not receive any comments that warranted withdrawal of the DFR; therefore, this rule will become effective as scheduled.#

Passage 2Issued in Washington, DC, on September 30, 2025, under the authority designated in 49 CFR 1.97. Benjamin D. Kochman, Deputy Administrator. [FR Doc. 2025-19343 Filed 10-1-25; 8:45 am] BILLING CODE 4910-60-P#