Rulemakinghistorical
91 FR 48302
Pipeline Safety: Standards Update-ASTM F1055
Current as of 2027-01-01 Government source
Pipeline and Hazardous Materials Safety AdministrationOfficial agency material
View source 
RegulusPipeline researchRegulusPipeline research91 FR 48302
Passage 1[Federal Register Volume 91, Number 146 (Friday, July 31, 2026)] [Rules and Regulations] [Page 48302] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2026-15580] ----------------------------------------------------------------------- Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2026-1531] RIN 2137-AG35 Pipeline Safety: Standards Update--ASTM F1055 AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), Department of Transportation (DOT). ACTION: Direct final rule (DFR); confirmation of effective date. ----------------------------------------------------------------------- SUMMARY: PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR part 192 to incorporate by reference the updated industry standard ASTM F1055, Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing. DATES: The effective date of the DFR is January 1, 2027. FOR FURTHER INFORMATION CONTACT: Brianna Wilson, Transportation Specialist, by phone at 771-215-0969 or by email at [email protected].#
Passage 2SUPPLEMENTARY INFORMATION: On April 24, 2026, PHMSA published a DFR titled ``Pipeline Safety: Standards Update--ASTM F1055'' (91 FR 21997). The DFR amended regulations at 49 CFR part 192 to incorporate the reapproved 2022 edition of ASTM F1055, Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing (ASTM F1055) by reference. Reference to the reapproved 2022 edition of ASTM F1055 will replace existing references within Sec. 192.283(a) and Appendix B to Part 192 to ASTM F1055-16a, Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing, approved November 15, 2016. PHMSA issued the DFR under the procedures set forth at 49 CFR 190.339. In accordance with those procedures, PHMSA stated in the DFR that if no adverse comments were received, the DFR would become effective on January 1, 2027. PHMSA did not receive any comments that warranted withdrawal of the DFR; therefore, this rule will become effective as scheduled. Issued in Washington, DC under authority delegated in 49 CFR 1.97. Keith J. Coyle, Chief Counsel. [FR Doc. 2026-15580 Filed 7-30-26; 8:45 am] BILLING CODE 4910-60-P#
This material provides agency context. It does not replace binding regulatory text, and its legal effect depends on the underlying authority and facts.