RegulusPipeline research87 FR 64384
Passage 1[Federal Register Volume 87, Number 205 (Tuesday, October 25, 2022)] [Rules and Regulations] [Page 64384] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: C1-2022-17031] ======================================================================= ----------------------------------------------------------------------- Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2011-0023; Amdt. No. 192-132] RIN 2137-AF39 Pipeline Safety: Safety of Gas Transmission Pipelines: Repair Criteria, Integrity Management Improvements, Cathodic Protection, Management of Change, and Other Related Amendments In Rule Document 2022-17031, appearing on pages 52224-52279, in the issue of Wednesday, August 24, 2022, make the following correction: 0 On page 52267, in the third column, paragraph ``(2)(i)'' is corrected to read as set forth below. * * * * * (2)(i) If the length of the wrinkle bend cannot be reliably determined, then wrinkle bend means a bend in the pipe where (h/D)*100 exceeds 2 when S is less than 37,000 psi (255 MPa), where (h/D)*100 exceeds (47000--S)/10,000 +1 for psi [324--S)/69 +1 for MPa] when S is greater than 37,000 psi (255 MPa) but less than 47,000 psi (324 MPa), and where (h/D)*100 exceeds 1 when S is 47,000 psi (324 MPa) or more. * * * * * [FR Doc. C1-2022-17031 Filed 10-24-22; 8:45 am] BILLING CODE 0099-10-P#
This material provides agency context. It does not replace binding regulatory text, and its legal effect depends on the underlying authority and facts.