Hunter Fan Company — Hazardous Materials Safety Interpretation

Page 10 U.S. Department of Transportation Pipeline and Hazardous Materials Safety Administration 1200 New Jersey Avenue, SE Washington, DC 20590 MAY 1 5 2019 Tony Bacon Hunter Fan Company 7130 Goodlett Farms Parkway Suite 400 Memphis, TN 38016 Reference No. 19-0013 Dear Mr. Bacon: This letter is in response to your February 04, 2019, email requesting clarification of the Hazardous Materials Regulations (HMR; 49 CFR Parts 171-180) applicable to lithium cells and batteries. In your email, you state the Hunter Fan company provides residential ceiling fans with a remote control and one lithium button cell battery (not installed in the remote control) in the same packaging. The packages are stacked together on a single pallet, and you ask questions regarding the marking and labeling requirements for these packages. We have paraphrased and answered your questions as follows: QI. Regarding§ 173.185(c)(3)(i), you ask whether the lithium battery mark must be affixed to a particular side of the package. Al. The answer is no. Bear in mind lithium button cell batteries are not subject to the lithium battery marking when installed in equipment (i.e., installed in the remote control). Q2. You ask if§ 173.185(c)(3)(i) does not specify a particular side for the placement of the lithium battery marking, would§ 172.406(a)(l)(i) be applicable to the packages. A2. The answer is no. Q3. You ask whether the location of the mark on the package shown in the photograph you provided is acceptable.#

Page 2A3. The a,nswer is yes. Although you are not subject to the hazard communication requirements of part 172 of the HMR, you are subject to the overpack requirements with regard to palletizing the packages in§ 173.25(a). I hope this information is helpful. Please contact us if we can be of further assistance.#

Page 3Dodd, Alice (PHMSA) From: Sent: To: Subject: Attachments: INFOCNTR (PHMSA) Tuesday, February 05, 2019 2:42 PM Hazmat Interps FW: PHMSA - Request for Interpretation on 49 CFR173.185(c)(3)(i) 52175-01 46in Leander CAN r012819 Reference.pdf; IMG_5323jpg; IMG_5325.jpg Hello Alice and lkeya, Please see the attached documents and the information below. Thanks, Lynsie Patschke Transportation Regulatory Specialist Hazardous Materials Information Center (HMIC} From: Bacon, Tony [mailto:tbacon@hunterfan.com] Sent: Monday, February 04, 2019 10:12 AM To: INFOCNTR (PHMSA) <INFOCNTR.INFOCNTR@dot.gov> Subject: PHMSA- Request for Interpretation on 49 CFR173 .185(c)(3)(i) Hunter respectfully requests a written response to the questions below. Product Background: Hunter branded residential ceiling fan with remote control. The fan and remote control are in the same packaging along with one button cell battery for t he remote. The battery is not installed in the remote control. The battery is a CR2032 3V lithium button cell battery. When transported from the factory outside the US, along with transportation in the US, multiple ceiling fan packages are stacked together on a single pallet. Please see the attached image of a standard Hunter ceiling fan package and the image of the remote with button cell battery. Question 1: Hunter Fan Company is requesting an interpretation of 49 CFR 173.185(c)(3)(i). This section of the regulation indicates the lithium battery mark must be affixed "on one side" of the package without the mark being folded. The regulation does not indicate left, right, front, back, top, or bottom. Please confirm whether the regulation requires the label be affixed to a particular side. Question 2: If 49 CFR 173.18S(c)(3)(i) doesn't specify a particular side of the ceiling fan packaging, is 49 172.406(a)(l)(i) applicable to this Hunter product? That section indicates the bottom cannot contain a label. It is unclear to Hunter whether 49 172.406(a)(l)(i) is applicable. Question 3: I attached an image of the proposed packaging for the Hunter Leander ceiling fan model. The location of the lithium battery mark is shown on a side panel of the packaging. Is this location acceptable? The ceiling fan packaging already contains others requirements (e.g. FTC label) in addition to basic product information that is needed to aid potential consumers when reviewing the Hunter product on a store shelf in a big box store. In other words, there are not options for placing the lithium battery mark on a side by itself. 1 ----------)#

Page 4Thank you, Tony Bacon Hunter Fan Company 7130 Goodlett Farms Pkwy, STE 400 Memphis, TN 38016 Phone: 901-248-2619 Email: tbacon@hunterfan.com Tony Bacon I General Counsel I Hunter Fan Company p. 901 -2 48-26 19 Itbacon@hunte rf an .comIwww.hunterfan .com From: Bacon, Tony Sent: Monday, December 24, 2018 1:19 PM To: infocntr@dot.gov Subject: PHMSA- Request for Interpretation on 49 CFR173.185(c)(3)(i) Hello, Hunter Fan Company is requesting an interpretation of 49 CFR 173.185(c)(3)(i). This section of the regulation indicates that the lithium battery mark must be affixed "on one side" of the package without the mark being folded. Hunter's understanding from speaking to PHMSA employees via the 202-366-4488 phone number is that "one side" of the package means any side. In other words, the regulation does not indicate left, right, front, back, top, or bottom. Please confirm whether the regulation requires the label be affixed to a particular side. Thank you. Tony Bacon Tony Bacon I General Counsel I Hunter Fan Company p. 90 1-248 -2619 Itbacon@hun terfan.com I www .hunterfan .com 2#

Page 51 1,i _h<_ .· ..... y,.._",-•·vw (<-,-~-,t.'<1"1•~ ';\)@ ''I PACKED THE PERFECT BREEZE FOR YOU." ----··"--, .. ______ ,, __ _. _ _____ ,,. __ ..,_ ........ _., ________ _ --ar-.~-.1111-....,. =m;:,.a;=::=..~-..:.-:= I · _ _ __ _ .,. _ _ ,...., I I ==:::...-.:::. ::---·.. I::: ~;s,~,,;- ,,::. -;,,.- ,;:. ,:c,,,;;- ~=~,,:::J:#

Page 6ENERGYGUIE! zape0 s $11 TR 6845 STAR RAPID* Lanter RAINSFORD CEILING FAN Hunter 52 MICHES#

Page 71.#