Oklahoma Natural Gas Company — Pipeline Safety Interpretation

Page 1May 30, 1975 Mr. J. H. Glamser Vice President Oklahoma Natural Gas Company P.O. Box 871 Tulsa, Oklahoma 74102 Dear Mr. Glamser: This responds to your letter of April 23, 1975, asking whether in rebuilding a pipeline under the right-of-way of a public highway in a Class 1 location, a design factor of 0.50 or 0.60 should be used in the design formula in 49 CFR 192.105 for steel pipe. Where steel pipe in a Class 1 location, crosses without a casing, or makes a parallel encroachment on a highway right-of-way, Section 192.111(b)(2) requires that a design factor of 0.60 or less by used. In rebuilding the pipeline, the use of a design factor of 0.60 would satisfy Section 192.111(b)(2). The term "or less" in Section 192.111(b) should not be construed as requiring that a lower design factor, e.g., 0.50, be used in certain circumstances. Rather, the term "or less" permits the pipe at the operator's discretion, to be designed for greater strength than that provided by a design factor of 0.60. We trust this satisfactorily answers your inquiry. Sincerely, Joseph C. Caldwell Director Office of Pipeline Safety dal\192\111\75-05-30#