RegulusPipeline research

Search Updates Timeline Research Projects Coverage Profile

Open research interfaceRegulatory evidence, ready for agents.

Public, read-only access. No account or API key required.

Start herellms.txt InstructionsLLM guide API contractOpenAPI WorkflowAgent skill ConnectMCP setup

Regulus · Pipeline research

About Terms Privacy

Source-first · Read-only · Citation-ready

49 CFR 195.118 - Fittings. | Regulus

Add to project

Projects

No projects yet

Export Official source

Regulation documentation

49 CFR Part 195

Location

titleTitle 49 — Transportation subtitleSubtitle B — Other Regulations Relating to Transportation chapterChapter I — Pipeline and Hazardous Materials Safety Administration, Department of Transportation subchapterSubchapter D — Pipeline Safety partPart 195 subpartSubpart C—Design Requirements

20 sections

Subpart A—General15

§ 195.0Scope.§ 195.1Which pipelines are covered by this Part?§ 195.2Definitions.§ 195.3What documents are incorporated by reference partly or wholly in this part?§ 195.4Compatibility necessary for transportation of hazardous liquids or carbon dioxide.§ 195.5Conversion to service subject to this part.§ 195.6Unusually Sensitive Areas (USAs).§ 195.8Transportation of hazardous liquid or carbon dioxide in pipelines constructed with other than steel pipe.§ 195.9Outer continental shelf pipelines.§ 195.10Responsibility of operator for compliance with this part.§ 195.11What is a regulated rural gathering line and what requirements apply?§ 195.12What requirements apply to low-stress pipelines in rural areas?§ 195.13What requirements apply to pipelines transporting hazardous liquids by gravity?§ 195.15What requirements apply to reporting-regulated-only gathering lines?§ 195.18How to notify PHMSA.

Subpart B—Annual, Accident, and Safety-Related Condition Reporting14

§ 195.48Scope.§ 195.49Annual report.§ 195.50Reporting accidents.§ 195.52Immediate notice of certain accidents.§ 195.54Accident reports.§ 195.55Reporting safety-related conditions.§ 195.56Filing safety-related condition reports.§ 195.58Report submission requirements.§ 195.59Abandonment or deactivation of facilities.§ 195.60Operator assistance in investigation.§ 195.61National Pipeline Mapping System.§ 195.63OMB control number assigned to information collection.§ 195.64National Registry of Operators.§ 195.65Safety data sheets.

Subpart C—Design Requirements20

§ 195.100Scope.§ 195.101Qualifying metallic components other than pipe.§ 195.102Design temperature.§ 195.104Variations in pressure.§ 195.106Internal design pressure.§ 195.108External pressure.§ 195.110External loads.§ 195.111Fracture propagation.§ 195.112New pipe.§ 195.114Used pipe.§ 195.116Valves.§ 195.118Fittings.§ 195.120Passage of internal inspection devices.§ 195.122Fabricated branch connections.§ 195.124Closures.§ 195.126Flange connection.§ 195.128Station piping.§ 195.130Fabricated assemblies.§ 195.132Design and construction of aboveground breakout tanks.§ 195.134Leak detection.

Subpart D—Construction29

§ 195.200Scope.§ 195.202Compliance with specifications or standards.§ 195.204Inspection—general.§ 195.205Repair, alteration and reconstruction of aboveground breakout tanks that have been in service.§ 195.206Material inspection.§ 195.207Transportation of pipe.§ 195.208Welding of supports and braces.§ 195.210Pipeline location.§ 195.212Bending of pipe.§ 195.214Welding procedures.§ 195.216Welding: Miter joints.§ 195.222Welders and welding operators: Qualification of welders and welding operators.§ 195.224Welding: Weather.§ 195.226Welding: Arc burns.§ 195.228Welds and welding inspection: Standards of acceptability.§ 195.230Welds: Repair or removal of defects.§ 195.234Welds: Nondestructive testing.§ 195.236-195.244§§ 195.236-195.244 [Reserved]§ 195.246Installation of pipe in a ditch.§ 195.248Cover over buried pipeline.§ 195.250Clearance between pipe and underground structures.§ 195.252Backfilling.§ 195.254Above ground components.§ 195.256Crossing of railroads and highways.§ 195.258Valves: General.§ 195.260Valves: Location.§ 195.262Pumping equipment.§ 195.264Impoundment, protection against entry, normal/emergency venting or pressure/vacuum relief for aboveground breakout tanks.§ 195.266Construction records.

Subpart E—Pressure Testing9

§ 195.300Scope.§ 195.302General requirements.§ 195.303Risk-based alternative to pressure testing older hazardous liquid and carbon dioxide pipelines.§ 195.304Test pressure.§ 195.305Testing of components.§ 195.306Test medium.§ 195.307Pressure testing aboveground breakout tanks.§ 195.308Testing of tie-ins.§ 195.310Records.

Subpart F—Operation and Maintenance34

§ 195.400Scope.§ 195.401General requirements.§ 195.402Procedural manual for operations, maintenance, and emergencies.§ 195.403Emergency response training.§ 195.404Maps and records.§ 195.405Protection against ignitions and safe access/egress involving floating roofs.§ 195.406Maximum operating pressure.§ 195.408Communications.§ 195.410Line markers.§ 195.412Inspection of rights-of-way and crossings under navigable waters.§ 195.413Underwater inspection and reburial of pipelines in the Gulf of America and its inlets.§ 195.414Inspections of pipelines in areas affected by extreme weather and natural disasters.§ 195.415[Reserved]§ 195.416Pipeline assessments.§ 195.417Notification of potential rupture.§ 195.418Valves: Onshore valve shut-off for rupture mitigation.§ 195.419Valve capabilities.§ 195.420Valve maintenance.§ 195.422Pipeline repairs.§ 195.424Pipe movement.§ 195.426Scraper and sphere facilities.§ 195.428Overpressure safety devices and overfill protection systems.§ 195.430Firefighting equipment.§ 195.432Inspection of in-service breakout tanks.§ 195.434Signs.§ 195.436Security of facilities.§ 195.438Smoking or open flames.§ 195.440Public awareness.§ 195.442Damage prevention program.§ 195.444Leak detection.§ 195.446Control room management.§ 195.450Definitions.§ 195.452Pipeline integrity management in high consequence areas.§ 195.454Integrity assessments for certain underwater hazardous liquid pipeline facilities located in high consequence areas.

Subpart G—Qualification of Pipeline Personnel5

§ 195.501Scope.§ 195.503Definitions.§ 195.505Qualification program.§ 195.507Recordkeeping.§ 195.509General.

Subpart H—Corrosion Control22

§ 195.551What do the regulations in this subpart cover?§ 195.553What special definitions apply to this subpart?§ 195.555What are the qualifications for supervisors?§ 195.557Which pipelines must have coating for external corrosion control?§ 195.559What coating material may I use for external corrosion control?§ 195.561When must I inspect pipe coating used for external corrosion control?§ 195.563Which pipelines must have cathodic protection?§ 195.565How do I install cathodic protection on breakout tanks?§ 195.567Which pipelines must have test leads and what must I do to install and maintain the leads?§ 195.569Do I have to examine exposed portions of buried pipelines?§ 195.571What criteria must I use to determine the adequacy of cathodic protection?§ 195.573What must I do to monitor external corrosion control?§ 195.575Which facilities must I electrically isolate and what inspections, tests, and safeguards are required?§ 195.577What must I do to alleviate interference currents?§ 195.579What must I do to mitigate internal corrosion?§ 195.581Which pipelines must I protect against atmospheric corrosion and what coating material may I use?§ 195.583What must I do to monitor atmospheric corrosion control?§ 195.585What must I do to correct corroded pipe?§ 195.587What methods are available to determine the strength of corroded pipe?§ 195.588What standards apply to direct assessment?§ 195.589What corrosion control information do I have to maintain?§ 195.591In-Line inspection of pipelines.

Browse regulation

Subpart A—General15

§ 195.0Scope.§ 195.1Which pipelines are covered by this Part?§ 195.2Definitions.§ 195.3What documents are incorporated by reference partly or wholly in this part?§ 195.4Compatibility necessary for transportation of hazardous liquids or carbon dioxide.§ 195.5Conversion to service subject to this part.§ 195.6Unusually Sensitive Areas (USAs).§ 195.8Transportation of hazardous liquid or carbon dioxide in pipelines constructed with other than steel pipe.§ 195.9Outer continental shelf pipelines.§ 195.10Responsibility of operator for compliance with this part.§ 195.11What is a regulated rural gathering line and what requirements apply?§ 195.12What requirements apply to low-stress pipelines in rural areas?§ 195.13What requirements apply to pipelines transporting hazardous liquids by gravity?§ 195.15What requirements apply to reporting-regulated-only gathering lines?§ 195.18How to notify PHMSA.

Subpart B—Annual, Accident, and Safety-Related Condition Reporting14

§ 195.48Scope.§ 195.49Annual report.§ 195.50Reporting accidents.§ 195.52Immediate notice of certain accidents.§ 195.54Accident reports.§ 195.55Reporting safety-related conditions.§ 195.56Filing safety-related condition reports.§ 195.58Report submission requirements.§ 195.59Abandonment or deactivation of facilities.§ 195.60Operator assistance in investigation.§ 195.61National Pipeline Mapping System.§ 195.63OMB control number assigned to information collection.§ 195.64National Registry of Operators.§ 195.65Safety data sheets.

Subpart C—Design Requirements20

§ 195.100Scope.§ 195.101Qualifying metallic components other than pipe.§ 195.102Design temperature.§ 195.104Variations in pressure.§ 195.106Internal design pressure.§ 195.108External pressure.§ 195.110External loads.§ 195.111Fracture propagation.§ 195.112New pipe.§ 195.114Used pipe.§ 195.116Valves.§ 195.118Fittings.§ 195.120Passage of internal inspection devices.§ 195.122Fabricated branch connections.§ 195.124Closures.§ 195.126Flange connection.§ 195.128Station piping.§ 195.130Fabricated assemblies.§ 195.132Design and construction of aboveground breakout tanks.§ 195.134Leak detection.

Subpart D—Construction29

§ 195.200Scope.§ 195.202Compliance with specifications or standards.§ 195.204Inspection—general.§ 195.205Repair, alteration and reconstruction of aboveground breakout tanks that have been in service.§ 195.206Material inspection.§ 195.207Transportation of pipe.§ 195.208Welding of supports and braces.§ 195.210Pipeline location.§ 195.212Bending of pipe.§ 195.214Welding procedures.§ 195.216Welding: Miter joints.§ 195.222Welders and welding operators: Qualification of welders and welding operators.§ 195.224Welding: Weather.§ 195.226Welding: Arc burns.§ 195.228Welds and welding inspection: Standards of acceptability.§ 195.230Welds: Repair or removal of defects.§ 195.234Welds: Nondestructive testing.§ 195.236-195.244§§ 195.236-195.244 [Reserved]§ 195.246Installation of pipe in a ditch.§ 195.248Cover over buried pipeline.§ 195.250Clearance between pipe and underground structures.§ 195.252Backfilling.§ 195.254Above ground components.§ 195.256Crossing of railroads and highways.§ 195.258Valves: General.§ 195.260Valves: Location.§ 195.262Pumping equipment.§ 195.264Impoundment, protection against entry, normal/emergency venting or pressure/vacuum relief for aboveground breakout tanks.§ 195.266Construction records.

Subpart E—Pressure Testing9

§ 195.300Scope.§ 195.302General requirements.§ 195.303Risk-based alternative to pressure testing older hazardous liquid and carbon dioxide pipelines.§ 195.304Test pressure.§ 195.305Testing of components.§ 195.306Test medium.§ 195.307Pressure testing aboveground breakout tanks.§ 195.308Testing of tie-ins.§ 195.310Records.

Subpart F—Operation and Maintenance34

§ 195.400Scope.§ 195.401General requirements.§ 195.402Procedural manual for operations, maintenance, and emergencies.§ 195.403Emergency response training.§ 195.404Maps and records.§ 195.405Protection against ignitions and safe access/egress involving floating roofs.§ 195.406Maximum operating pressure.§ 195.408Communications.§ 195.410Line markers.§ 195.412Inspection of rights-of-way and crossings under navigable waters.§ 195.413Underwater inspection and reburial of pipelines in the Gulf of America and its inlets.§ 195.414Inspections of pipelines in areas affected by extreme weather and natural disasters.§ 195.415[Reserved]§ 195.416Pipeline assessments.§ 195.417Notification of potential rupture.§ 195.418Valves: Onshore valve shut-off for rupture mitigation.§ 195.419Valve capabilities.§ 195.420Valve maintenance.§ 195.422Pipeline repairs.§ 195.424Pipe movement.§ 195.426Scraper and sphere facilities.§ 195.428Overpressure safety devices and overfill protection systems.§ 195.430Firefighting equipment.§ 195.432Inspection of in-service breakout tanks.§ 195.434Signs.§ 195.436Security of facilities.§ 195.438Smoking or open flames.§ 195.440Public awareness.§ 195.442Damage prevention program.§ 195.444Leak detection.§ 195.446Control room management.§ 195.450Definitions.§ 195.452Pipeline integrity management in high consequence areas.§ 195.454Integrity assessments for certain underwater hazardous liquid pipeline facilities located in high consequence areas.

Subpart G—Qualification of Pipeline Personnel5

§ 195.501Scope.§ 195.503Definitions.§ 195.505Qualification program.§ 195.507Recordkeeping.§ 195.509General.

Subpart H—Corrosion Control22

§ 195.551What do the regulations in this subpart cover?§ 195.553What special definitions apply to this subpart?§ 195.555What are the qualifications for supervisors?§ 195.557Which pipelines must have coating for external corrosion control?§ 195.559What coating material may I use for external corrosion control?§ 195.561When must I inspect pipe coating used for external corrosion control?§ 195.563Which pipelines must have cathodic protection?§ 195.565How do I install cathodic protection on breakout tanks?§ 195.567Which pipelines must have test leads and what must I do to install and maintain the leads?§ 195.569Do I have to examine exposed portions of buried pipelines?§ 195.571What criteria must I use to determine the adequacy of cathodic protection?§ 195.573What must I do to monitor external corrosion control?§ 195.575Which facilities must I electrically isolate and what inspections, tests, and safeguards are required?§ 195.577What must I do to alleviate interference currents?§ 195.579What must I do to mitigate internal corrosion?§ 195.581Which pipelines must I protect against atmospheric corrosion and what coating material may I use?§ 195.583What must I do to monitor atmospheric corrosion control?§ 195.585What must I do to correct corroded pipe?§ 195.587What methods are available to determine the strength of corroded pipe?§ 195.588What standards apply to direct assessment?§ 195.589What corrosion control information do I have to maintain?§ 195.591In-Line inspection of pipelines.

Related 29 Definitions History 29 Authority 54

RegulationsTitle 49Subtitle BChapter ISubchapter DPart 195Subpart C—Design Requirements49 CFR 195.118

Regulationcurrent

49 CFR 195.118

Fittings.

Current as of 2026-08-18 Government source

eCFR editorial compilationAuthoritative but unofficial

3 passages

(a)Butt-welding type fittings must meet the marking, end preparation, and the bursting strength requirements of ASME/ANSI B16.9 or MSS SP-75 (incorporated by reference, see § 195.3).#

(b)There may not be any buckles, dents, cracks, gouges, or other defects in the fitting that might reduce the strength of the fitting.#

(c)The fitting must be suitable for the intended service and be at least as strong as the pipe and other fittings in the pipeline system to which it is attached.#

Previous§ 195.116 Next§ 195.120

On this page

(a)Butt-welding type fittings must meet the marking, end preparation, and the bursting streng (b)There may not be any buckles, dents, cracks, gouges, or other defects in the fitting that (c)The fitting must be suitable for the intended service and be at least as strong as the pip

Related 29 Definitions History 29 Authority 54 Community

Treatment labels are shown only when backed by an indexed source relationship. Event dates link to official evidence.

interprets

interprets

interprets

interprets

interprets

interprets

enforces

195.118(c), 195.118

enforces

enforces

enforces

mentions

mentions

mentions

PHMSA HL.2026.01

DC.DN.DESIGN.P — 195.118(c), 195.118(a), 195.118(b) (+4 more questions)

mentions

mentions

PHMSA HL.2025.01

DC.BIO.DESIGN.P — 195.118(c), 195.118(a), 195.118(b) (+4 more questions)

mentions

mentions

PHMSA HL.2024.01

DC.BIO.DESIGN.P — 195.118(c), 195.118(a), 195.118(b) (+4 more questions)

mentions

PHMSA HL.2023.01

DC.BIO.DESIGN.P — 195.118(c), 195.118(a), 195.118(b) (+4 more questions)

mentions

PHMSA HL.2022.01

DC.BIO.DESIGN.P — 195.118(c), 195.118(a), 195.118(b) (+4 more questions)

mentions

mentions

PHMSA HL.2021.01

DC.BIO.DESIGN.P — 195.118(c), 195.118(a), 195.118(b) (+4 more questions)

mentions

mentions

mentions

mentions

mentions

mentions

mentions

mentions

2025-10-01snapshot

Official annual CFR edition 2025-10-01

2024-10-01snapshot

Official annual CFR edition 2024-10-01

2023-10-01snapshot

Official annual CFR edition 2023-10-01

2022-10-01snapshot

Official annual CFR edition 2022-10-01

2021-10-01snapshot

Official annual CFR edition 2021-10-01

2020-10-01snapshot

Official annual CFR edition 2020-10-01

2019-10-01snapshot

Official annual CFR edition 2019-10-01

2018-10-01snapshot

Official annual CFR edition 2018-10-01

2017-10-01snapshot

Official annual CFR edition 2017-10-01

2017-01-01amended

§ 195.118 Fittings. version event

2016-10-01snapshot

Official annual CFR edition 2016-10-01

2015-10-01snapshot

Official annual CFR edition 2015-10-01

2014-10-01snapshot

Official annual CFR edition 2014-10-01

2013-10-01snapshot

Official annual CFR edition 2013-10-01

2012-10-01snapshot

Official annual CFR edition 2012-10-01

2011-10-01snapshot

Official annual CFR edition 2011-10-01

2010-10-01snapshot

Official annual CFR edition 2010-10-01

2009-10-01snapshot

Official annual CFR edition 2009-10-01

2008-10-01snapshot

Official annual CFR edition 2008-10-01

2007-10-01snapshot

Official annual CFR edition 2007-10-01

2006-10-01snapshot

Official annual CFR edition 2006-10-01

2005-10-01snapshot

Official annual CFR edition 2005-10-01

2004-10-01snapshot

Official annual CFR edition 2004-10-01

2003-10-01snapshot

Official annual CFR edition 2003-10-01

2002-10-01snapshot

Official annual CFR edition 2002-10-01

Ask the corpus

Claims link back to retrieved source passages.

Record details

Retrieved: Aug 20, 2026
Version: 2026-08-18

104574426a37e6a80e…