HAR 6-77-110 Customer meter installations: operating pressure

used at a pressure that is more than sixty-seven percent of the manufacturer's shell test pressure.#

(b)Each newly installed meter manufactured after November 12, 1970, must have been tested to a minimum of 10 p.s.i.g.#

(c)A rebuilt or repaired tinned steel case meter may not be used at a pressure that is more than fifty percent of the pressure used to test the meter after rebuilding or repairing. [Eff ] (Auth: HRS '269-6) (Imp: 49#

C.F.R. '192.359, October 1, 1990)#