HAR 6-77 Appendix A Incorporated by Reference

HAR 6-77 Appendix AIncorporated by Reference#

I.List of organizations and addresses.#

A.10018. American National Standards Institute (ANSI), 1430 Broadway, New York,#

N.Y.#

B.American Petroleum Institute (API), 1801 K Street#

N.W., Washington,#

D.C. 20006 or 300 Corrigan Tower Building, Dallas Tex. 75201.#

C.The American Society of Mechanical Engineers (ASME), United Engineering Center, 345 East 47th Street, New York,#

N.Y. 10017.#

D.American Society for Testing and Materials (ASTM), 1916 Race Street, Philadelphia, Pa. 19103.#

E.Manufacturers Standardization Society of the Valve and Fittings Industry (MSS), 5203 Leesburg Pike, Suite 502, Falls Church, Va. 22041.#

F.National Fire Protection Association (NFPA), Batterymarch Park, Quincy, Massachusetts 02269.#

II.Documents incorporated by reference. Numbers in parentheses indicate applicable editions.#

A.American Petroleum Institute:#

(1)API Specification 6D "API Specification for Pipeline Valves"#

(1977).#

(2)API Specification 5L "API Specification for Line Pipe"#

(1988).#

(3)API Recommended Practice 5LI "API Recommended Practice for Railroad Transportation of Line Pipe"#

(1972)#

(4)API Standard 1104 "Standard for Welding Pipelines and Related Facilities" (17th edition, 1988).#

B.The American Society for Testing and Materials:#

(1)ASTM Specification A53 "Standard Specification for Pipe, Steel, Black and Hot- Dipped, Zinc-Coated Welded and Seamless" (A53-79).#

(2)ASTM Specification A106 "Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service" (A106-79b).#

(3)ASTM Specification A671 "Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures" (A671-77).#

(4)ASTM Specification A672 "Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures" (A672-79).#

(5)ASTM Specification A691 "Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures" (A691-79).#

(6)ASTM Specification A333 "Standard Specification for Seamless and Welded Steel Pipe for Low Temperature Service" (A333-79).#

(7)ASTM Specification A372 "Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels" (A372-78).#

(8)ASTM Specification A381 "Standard Specification for Metal-Arc-Welded Steel Pipe for use with High-Pressure Transmission Systems" (A381-79).#

(9)ASTM Specification D638 "Standard Test Method for Tensile Properties of Plastic" (D638-77a).#

(10)ASTM Specification D2513 "Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings" (D2513-87).#

(11)ASTM Specification D2517 "Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings" (D2517-73) (Reapproved 1979).#

C.The American National Standards Institute, Inc.:#

(1)ANSI B16.1 "Cast-Iron Pipe Flanges and Flanged Fittings"#

(1975).#

(2)ANSI B16.5 "Steel Pipe Flanges and Flanged Fittings"#

(1977).#

D.The American Society of Mechanical Engineers:#

(1)ASME Boiler and Pressure Vessel Code, Section VIII "Pressure Vessels Division 1"#

(1977).#

(2)ASME Boiler and Pressure Vessel Code, Section IX "Welding Qualifications"#

(1977).#

E.Manufacturer's Standardization Society of the Valve and Fittings Industry;#

(1)MSS SP-44 "Steel Pipe Line Flanges"#

(1975).#

(2)[Reserved]#

F.National Fire Protection Association:#

(1)NFPA Standard 30 "Flammable and Combustible Liquids Code"#

(1977).#

(2)NFPA Standard 58 "Standard for the Storage and Handling of Liquefied Petroleum Gases"#

(1979).#

(3)NFPA Standard 59 "Standard for the Storage and Handling of Liquefied Petroleum Gases at Utility Gas Plants"#

(1979).#

(4)NFPA Standard 59A "Storage and Handling Liquefied Gas"#

(1979).#

(5)"National Electrical Code" NFPA-70 (ANSI)#

(1978). [Eff 1990) ] (Auth: HRS '269-6) (Imp: 49#

C.F.R. Ch. 1, Appendix A, October 1,#